Search

As a noncontact target recognition technique, radio-frequency identification (RFID) technology demonstrates attractive potential in constructing human-machine interaction (HMI) systems. However, the current development of RFID technologies in HMI systems is hampered by critical challenges in manufacturing high-performance RFID readers with superior flexibility and wearing comfort. Hence, we propose a multilevel printing strategy to overcome the difficulties in manufacturing high-performance large-scale microwave systems. Compared to traditional processes, the RFID system fabricated by the hybrid additive manufacturing technique exhibits equivalent electromagnetic performance and has obvious advantages in terms of manufacturing cost and environmental friendliness. A printed reconfigurable antenna with intelligent radiation mode is seamlessly integrated with the reader circuit via a "one-step" printing technology. Additionally, through chemical doping and artificial intelligence (AI) prediction, we have developed a modified polydimethylsiloxane (PDMS) encapsulation to miniaturize the system volume and enhance reliability. Electromagnetic and mechanical measurements demonstrated that our flexible RFID platform offers superior reliability and stability during long-term daily use. The RFID platform possesses exceptional capabilities in target positioning and accurate identification, demonstrating unique potential in noncontact sensing and recognition, which are highly demanded by flexible and wearable HMI systems.

Distributed micro-energy harvesting devices offer the flexibility, sustainability, and multi-scenario applicability that will be critical to wearable electronic products in the Internet of Things. The radiofrequency and triboelectric (RF-TE) hybrid energy harvester (HEH) concept and prototype is presented for the first time, to simultaneously capture the energy from ambient electromagnetic waves and biological motions. The proposed hybrid energy harvesting system consists of a wearable rectenna, a triboelectric nanogenerator (TENG), and a power management circuit (PMC). Among them, the all-fabric rectenna exhibits good impedance matching characteristics in the ISM frequency. The flexible TENG unit can generate a maximum power density of 0.024 µW cm -2 . The designed multifunctional fabric-based PMC can considerably enhance the controllability of harvested hybrid energy. Additionally, a normalizable fabric circuit board quasi surface mount technology (FCB-SMT) is proposed to integrate all modules on the same fabric substrate in one step, making the entire system superior mechanical robustness. The proposed wearable fabric-based RF-TE hybrid energy harvester is capable of successfully driving consumer electronics (such as sensors, watches, etc.). It provides a new energy solution strategy for self-powered wearable electronic devices and is anticipated to encourage the efficient utilization of renewable energy., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

The application of 2D materials-based flexible electronics in wearable scenarios is limited due to performance degradation under strain fields. In contrast to its negative role in existing transistors or sensors, herein, we discover a positive effect of strain to the ammonia detection in 2D PtSe 2 . Linear modulation of sensitivity is achieved in flexible 2D PtSe 2 sensors via a customized probe station with an in situ strain loading apparatus. For trace ammonia absorption, a 300% enhancement in room-temperature sensitivity (31.67% ppm -1 ) and an ultralow limit of detection (50 ppb) are observed under 1/4 mm -1 curvature strain. We identify three types of strain-sensitive adsorption sites in layered PtSe 2 and pinpoint that basal-plane lattice distortion contributes to better sensing performance resulting from reduced absorption energy and larger charge transfer density. Furthermore, we demonstrate state-of-the-art 2D PtSe 2 -based wireless wearable integrated circuits, which allow real-time gas sensing data acquisition, processing, and transmission through a Bluetooth module to user terminals. The circuits exhibit a wide detection range with a maximum sensitivity value of 0.026 V·ppm -1 and a low energy consumption below 2 mW.

With the growing development of the Internet of things, wearable electronic devices have been extensively applied in civilian and military fields. As an essential component of data transmission in wearable electronics, a flexible antenna is one of the key aspects of research. Conventional metal antennas suffer from a large skin depth, and cannot satisfy the requirements of wearable electronics such as light weight, flexibility, and thinness. Recently, a group of two-dimensional metallic metal carbides (named MXenes) have been explored as building blocks for high-performance flexible antennas with excellent flexibility and superior mechanical strength. The appearance of hydrophilic functional groups at the surface of a MXene allows simple, scalable, and environmentally friendly manufacturing of MXene-based antennas. In this minireview, some pioneering works of MXene-based flexible radio frequency components are summarized, and the existing bottlenecks and the future trends of this promising field are discussed.

Ultrafast electro-optical conversion at nanoscale is of fundamental interest for information transfer and optical interconnects. Light emission from a quantum tunnel junction provides an opportunity owing to its unique capability of ultrafast response and small footprint. However, the main challenge to the wide adoption of the tunnel junction is its low emission efficiency caused by the low inelastic electron tunneling proportion and radiation efficiency. In this Letter, an electrically driven silicon light source with its efficiency enhanced by using a nano-antenna in a metal-insulator-semiconductor junction is proposed. Strong plasmon confinement in the nano-antenna provides large local density of optical states and bridges the wave vector mismatch between nanoscale volume field confinement and far-field radiation. Two orders of magnitude of emission enhancement are achieved over typical planar MIS junctions.

Graphene, as a type of flexible and electrically adjustable two-dimensional material, has exceptional optical and electrical properties that make it possible to be used in modulators. However, the poor interaction between optical fields and a single atom graphene layer prevents the easy implementation of graphene modulators. Currently available devices often require a larger overlap area of graphene to obtain the desired phase or amplitude modulation, which results in a rather large footprint and high capacitance and consequently increases the energy consumption and reduces the modulation speed. In this paper, a localized plasmonic-enhanced waveguide modulator with high-speed tunability using graphene is proposed for telecommunication applications. Strong modulation of the transmission takes place due to the enhanced interaction between the ultrathin plasmon patches and the graphene, when the plasmons are tuned on- and off-resonance by the gate-tunable graphene. A 400 GHz modulation rate using low gated-voltages with an active device area of 0.2 μm 2 and a low consumption of only 0.5 fJ/bit is achieved, which paves the way for ultrafast low-energy optical waveguide modulation and switching.

Fluorescence spectrophotometry has been proposed as a quick screening technique for the measurement of naphthenic acids (NAs). To evaluate the feasibility of this application, the fluorescence emission spectra of NAs extracted from three oil sands process water sources were compared with that of commercial NAs. The NAs resulting from the bitumen extraction process cannot be differentiated because of the similarity of the fluorescence spectra. Separation of the fluorescent species in NAs using high performance liquid chromatography with fluorescence detector proved unsuccessful. The acidic fraction of NAs is fluorescent but the basic fraction of NAs is not fluorescent, implying that aromatic acids in NAs give rise to the fluorescent signals. The concentrations of NAs in oil sands process water were measured by Fourier transform infrared spectroscopy (FTIR), fluorescence spectrophotometry and ultra high performance liquid chromatography-time of flight/mass spectrometry (UPLC-TOF/MS). Commercial Merichem and Kodak NAs are the best standards to use when measuring NAs concentration with FTIR and fluorescence spectrophotometry. In addition, the NAs concentrations measured by fluorescence spectrophotometry are about 30 times higher than those measured by FTIR and UPLC-TOF/MS. The findings in this study underscore the limitation of fluorescence spectrophotometry in the measurement of NAs.

Monocyte-based gene therapies in cancer have been hampered by either the resistance of these cells to non-viral molecular delivery methods or their poor trafficking to the tumor site after their ex vivo manipulations. Magnetic nanoparticles (MNP)-loaded genetically engineered monocytes can efficiently delivered to tumor site by external magnetic field, but they are not ideal delivery tools due to their spherical shape. Hence, we have investigated the cellular uptake efficiency and cytotoxicity of fluorescein isothiocyanate (FITC)-labelled magnetic carbon nanotubes (FITC-mCNT) in human monocytic leukemia cell line THP-1 for application in cell-based gene therapy against cancer. Uptake of FITC-mCNT into THP-1 cells reached 100% only 1 h after the delivery. Confocal imaging confirmed that FITC-mCNT entered the cell cytoplasm and even into the nucleus. FITC-mCNT uptake did not compromise cell viability. This delivery system might therefore enhance cell-based cancer gene therapies.

Haematopoietic stem and progenitor cell (HSPC) research has significantly contributed to the understanding and harnessing of haematopoiesis for regenerative medicine. However, the methodology for real-time tracking HSPC in vivo is still lacking, which seriously restricts the progress of research. Recently, magnetic carbon nanotubes (mCNT) have generated great excitement because they have been successfully used as vehicles to deliver a lot of biomolecules into various cells. There is, however, no report about mCNT being used for tracking HSPC. In this paper, we investigated the uptake efficiency of fluorescein-isothiocyanate-labelled mCNT (FITC-mCNT) into HSPC and their effect on the cytotoxicity and differentiation of HSPC. We found that cellular uptake of FITC-mCNT was concentration-and time-dependent. The uptake of FITC-mCNT into HSPC reached up to 100% with the highest mean fluorescence (MF). More importantly, efficient FITC-mCNT uptake has no adverse effect on the cell viability, cytotoxicity and differentiation of HSPC as confirmed by colony-forming unit assay (CFU). In conclusion, the results reported here suggest the further tailoring of mCNT for their use in HSPC labelling/tracking in vivo or gene delivery into HSPC.

Eleven self-complementary G/\C derivatives bearing hydrophobic moieties were synthesized and characterized. One representative derivative from this family was shown to self-assemble into rosette nanotubes in hexane and form Langmuir-Blodgett films at the air-water interface.

A Lewis base-catalyzed three-component cascade reaction was developed for the synthesis of 4,5-disubstituted-1,2,3-(NH)-triazoles. More than 25 new (NH)-triazoles were prepared in good to excellent yields under mild conditions. The availability of the C-4 vinyl group allows easy conversion into other triazole derivatives.

A simple facile synthesis of substituted purine derivatives has been developed by using Mitsunobu conditions for an alcohol and a respective nucleobase. A wide range of alcohols produces good to excellent yield (>90%). The resulting purine analogues show good regioselectivity with N-9 substitution as the dominant products in most of the cases. Application of diastereospecific alcohols reveals a complete inversion of the carbon stereogenic center giving a single diastereomer. More than two dozen novel nucleobase derivatives have been prepared in high yield.