Search

Construction of a solid electrolyte interphase (SEI) of zinc (Zn) electrode is an effective strategy to stabilize Zn electrode/electrolyte interface. However, single-layer SEIs of Zn electrodes undergo rupture and consequent failure during repeated Zn plating/stripping. Here, we propose the construction of a robust bilayer SEI that simultaneously achieves homogeneous Zn 2+ transport and durable mechanical stability for high Zn utilization rate (ZUR) and Coulombic efficiency (CE) of Zn electrode by adding 1,3-Dimethyl-2-imidazolidinone as a representative electrolyte additive. This bilayer SEI on Zn surface consists of a crystalline ZnCO 3 -rich outer layer and an amorphous ZnS-rich inner layer. The ordered outer layer improves the mechanical stability during cycling, and the amorphous inner layer homogenizes Zn 2+ transport for homogeneous, dense Zn deposition. As a result, the bilayer SEI enables reversible Zn plating/stripping for 4800 cycles with an average CE of 99.95% (± 0.06%). Meanwhile, Zn | |Zn symmetric cells show durable lifetime for over 550 h with a high ZUR of 98% under an areal capacity of 28.4 mAh cm -2 . Furthermore, the Zn full cells based on the bilayer SEI functionalized Zn negative electrodes coupled with different positive electrodes all exhibit stable cycling performance under high ZUR., (© 2024. The Author(s).)

The aqueous zinc-iodine battery is a promising energy storage device, but the conventional two-electron reaction potential and energy density of the iodine cathode are far from meeting practical application requirements. Given that iodine is rich in redox reactions, activating the high-valence iodine cathode reaction has become a promising research direction for developing high-voltage zinc-iodine batteries. In this work, by designing a multifunctional electrolyte additive trimethylamine hydrochloride (TAH), a stable high-valence iodine cathode in four-electron-transfer I - /I 2 /I + reactions with a high theoretical specific capacity is achieved through a unique amine group, Cl bidentate coordination structure of (TA)ICl. Characterization techniques such as synchrotron radiation, in situ Raman spectra, and DFT calculations are used to verify the mechanism of the stable bidentate structure. This electrolyte additive stabilizes the zinc anode by promoting the desolvation process and shielding mechanism, enabling the zinc anode to cycle steadily at a maximum areal capacity of 57 mAh cm -2 with 97 % zinc utilization rate. Finally, the four-electron-transfer aqueous Zn-I 2 full cell achieves 5000 stable cycles at an N/P ratio of 2.5. The unique bidentate coordination structure contributes to the further development of high-valence and high capacity aqueous zinc-iodine batteries., (© 2024 Wiley-VCH GmbH.)

Low carbon and high performance have become key trends in the development of construction materials. Understanding the mechanism by which curing conditions affect the mechanical properties of high-ductility geopolymer concrete (HDGC) is of significant importance. This study investigated three sealing curing temperatures (room temperature, 45 °C, and 60 °C) and four curing durations (1 day, 3 days, 5 days, and 7 days), while considering two final curing ages (7 days and 28 days) to explore their effects on the axial tensile and compressive properties of HDGC. The results showed that both 45 °C and 60 °C could improve the brittle failure of HDGC under axial compressive loading. However, curing at 60 °C and for durations longer than 1 day in an oven would catalyze the formation of eight-faced zeolite crystals within the slag-fly ash geopolymer matrix, and it could weaken the matrix's pore structure and subsequently affect the material's later strength development. Nevertheless, oven heat curing enhanced the bridging effect between the fibers and the matrix, partially compensating for the reduction in the initial tensile strength of HDGC. This follows the pseudo-strain-hardening material's saturation cracking criterion to enhance the strain-hardening behavior of HDGC and improve its tensile energy absorption capacity. A curing condition of 45 °C for 5 days is recommended to maximize the ductility of HDGC. This study provides important theoretical support for the design and promotion of green, low-carbon, high-ductility composite materials.

The development of Zn-free anodes to inhibit Zn dendrite formation and modulate high-capacity Zn batteries is highly applauded yet very challenging. Here, we design a robust two-dimensional antimony/antimony-zinc alloy heterostructured interface to regulate Zn plating. Benefiting from the stronger adsorption and homogeneous electric field distribution of the Sb/Sb 2 Zn 3 -heterostructured interface in Zn plating, the Zn anode enables an ultrahigh areal capacity of 200 mAh cm -2 with an overpotential of 112 mV and a Coulombic efficiency of 98.5%. An anode-free Zn-Br 2 battery using the Sb/Sb 2 Zn 3 -heterostructured interface@Cu anode shows an attractive energy density of 274 Wh kg -1  with a practical pouch cell energy density of 62 Wh kg -1 . The scaled-up Zn-Br 2 battery in a capacity of 500 mAh exhibits over 400 stable cycles. Further, the Zn-Br 2 battery module in an energy of 9 Wh (6 V, 1.5 Ah) is integrated with a photovoltaic panel to demonstrate the practical renewable energy storage capabilities. Our superior anode-free Zn batteries enabled by the heterostructured interface enlighten an arena towards large-scale energy storage applications., (© 2023. The Author(s).)

An aqueous electrolytic MnO 2 -Zn battery with eye-catching Mn 2+ /MnO 2 cathode chemistry has been attracting immense interest for next-generation energy storage devices due to its irreplaceable advantages. However, the limited MnO 2 conductivity restricts its long service life at high areal capacities. Here, we report a high-performance electrolytic MnO 2 -Zn battery via a bromine redox mediator, to enhance its electrochemical performance. The MnO 2 /Br 2 -Zn battery displays a high discharge voltage of 1.98 V with a capacity of ∼5.8 mAh cm -2 . It also shows an excellent rate performance of 20 C with a long-term stability of over 600 cycles. Furthermore, the scaled-up MnO 2 /Br 2 -Zn battery with a capacity of ∼950 mAh exhibits a stable 100 cycles with a practical cell energy density of ∼32.4 Wh kg -1 and an attractively low energy cost of below 15 US$ kWh -1 . The design approach can be generalized to other electrodes and battery systems, thus opening up new possibilities for large-scale energy storage.