Search

A novel, simple, sensitive, and precise spectrofluorometric assay of cancer antigen [CA 125] is described. This modality is based on monitoring the quenching of the luminescence intensity at 790 nm of the phthalocyanine fluorophore, in a nanocomposite comprising the fluorophore and cationic polystyrene, which results from interaction with CA 125. The remarkable quenching of the luminescence intensity of the Ni-phthalocyanine complex doped in PS matrix by various concentrations of CA 125 was successfully utilized as an optical sensor for the determination of CA 125 in different serum samples of ovarian disease. The performance of the designed biosensor is determined through monitoring the quenching of the luminescence intensity at 790 nm by cancer antigen 125 after excitation at 685 nm, pH 7.3 in water. The calibration plot was achieved over the concentration range 1.0 × 10 -2 - 127 U mL -1 CA-125 with a correlation coefficient of 0.99 and detection limit of 1.0 × 10 -4 U mL -1 . The mechanism of the interaction between the nano thin film nickel(II)phthalocyanine and CA-125 was discussed. A significant correlation between the proposed method for the assessment of CA 125 and the standard method was applied to patients and controls., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Ni- and Cu/alumina powders were prepared and characterized by X-ray diffraction (XRD), scanning electronic microscope (SEM), and N₂ physisorption isotherms were also determined. The Ni/Al₂O₃ sample reveled agglomerated (1 μm) of nanoparticles of Ni (30-80 nm) however, NiO particles were also identified, probably for the low temperature during the H 2 reduction treatment (350 °C), the Cu/Al₂O₃ sample presented agglomerates (1-1.5 μm) of nanoparticles (70-150 nm), but only of pure copper. Both surface morphologies were different, but resulted in mesoporous material, with a higher specificity for the Ni sample. The surfaces were used in a new proposal for producing copper and nickel phthalocyanines using a parallel-plate reactor. Phthalonitrile was used and metallic particles were deposited on alumina in ethanol solution with CH₃ONa at low temperatures; ≤60 °C. The mass-transfer was evaluated in reaction testing with a recent three-resistance model. The kinetics were studied with a Langmuir-Hinshelwood model. The activation energy and Thiele modulus revealed a slow surface reaction. The nickel sample was the most active, influenced by the NiO morphology and phthalonitrile adsorption.