Search

Tannery sludge, a challenging waste, was utilized as a substrate for the production of Short-Chain Fatty Acids (SCFAs) through a series of six thermophilic Continuous Stirred-Tank Reactor runs. The sludge was subjected to a mild thermal pre-treatment and incorporated zeolites (chabazite in run II, and clinoptilolite in run III) in the acidification process. Results highlighted zeolites' impact on chromium concentration and the SCFAs/COD SOL ratio. Ammonia release remained consistent at around 47 % and 51 % for run I and II, respectively, but surpassed 60% in run III, suggesting limited zeolite effectiveness in NH 4 absorption. Chromium release in the liquid fraction, due to thermal pretreatment, reached 335 mg/L. While in tests without zeolite, complete removal proved challenging, in zeolite-amended runs, complete removal was achieved, showcasing the materials' heavy metal absorption capacity. SCFA concentrations reached 20260 mgCOD/L, with acidification efficiency varying; runs I and III had ratios around 0.70 COD/COD, while run II showed substantial improvement (0.92) with chabazite. Anaerobic fermentation-digestion mass balance indicated a 41% reduction in landfill sludge mass, reducing its environmental footprint while yielding valuable byproducts like biogas and SCFAs. These findings underscore zeolites' potential in heavy metal absorption and acidification process enhancement, paving the way for applications with tannery sludge., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Artificial intelligence (AI) is changing the way computing is performed to cope with real-world, ill-defined tasks for which traditional algorithms fail. AI requires significant memory access, thus running into the von Neumann bottleneck when implemented in standard computing platforms. In this respect, low-latency energy-efficient in-memory computing can be achieved by exploiting emerging memristive devices, given their ability to emulate synaptic plasticity, which provides a path to design large-scale brain-inspired spiking neural networks (SNNs). Several plasticity rules have been described in the brain and their coexistence in the same network largely expands the computational capabilities of a given circuit. In this work, starting from the electrical characterization and modeling of the memristor device, we propose a neuro-synaptic architecture that co-integrates in a unique platform with a single type of synaptic device to implement two distinct learning rules, namely, the spike-timing-dependent plasticity (STDP) and the Bienenstock-Cooper-Munro (BCM). This architecture, by exploiting the aforementioned learning rules, successfully addressed two different tasks of unsupervised learning.

The present study describes the microbial production of polyhydroxyalkanoates (PHA) from thermally pre-treated sewage sludge at pilot scale level, investigating for the first time the effect of the organic loading rate (OLR) under oxygen limitation on biomass storage properties and kinetics. Polymer characteristics have been also evaluated. The selection/enrichment of PHA-storing biomass was successfully achieved in a Sequencing Batch Reactor (SBR) under short hydraulic retention time (HRT; 2 days). Low OLR (2.05 g COD/L d) was ideal for the selection of an efficient PHA-producing consortium cultivated under limited oxygen availability. In the fed-batch accumulation conducted under high DO regime, such biomass was characterized by 51% of PHA content on cell dry weight, with a related storage yield (Y P/S batch ) of 0.61 COD PHA /COD S . On the contrary, medium OLR (4.56 g COD/L d) was not technically feasible to sustain the required consortium's selection under low DO regime. The PHA produced by biomass cultivated under low DO regime was characterized higher thermal stability and crystalline domain compared to PHA traditionally produced under high DO regime. The mass balance assessment highlighted a global yield of 51 g PHA/kg VS (volatile solids of thickened sludge), which was 9% lower than yield obtained under high DO regime, in the face of a realistic reduction of the energy cost of the process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

The majority of car accidents worldwide are caused by drowsy drivers. Therefore, it is important to be able to detect when a driver is starting to feel drowsy in order to warn them before a serious accident occurs. Sometimes, drivers are not aware of their own drowsiness, but changes in their body signals can indicate that they are getting tired. Previous studies have used large and intrusive sensor systems that can be worn by the driver or placed in the vehicle to collect information about the driver's physical status from a variety of signals that are either physiological or vehicle-related. This study focuses on the use of a single wrist device that is comfortable for the driver to wear and appropriate signal processing to detect drowsiness by analyzing only the physiological skin conductance (SC) signal. To determine whether the driver is drowsy, the study tests three ensemble algorithms and finds that the Boosting algorithm is the most effective in detecting drowsiness with an accuracy of 89.4%. The results of this study show that it is possible to identify when a driver is drowsy using only signals from the skin on the wrist, and this encourages further research to develop a real-time warning system for early detection of drowsiness.

Dairy products, extra virgin olive oil, red and white wines are excellent food products, appreciated all around the world. Their productions generate large amounts of by-products which urge for recycling and valorization. Moreover, another abundant waste stream produced in urban context is the Organic Fraction of Municipal Solid Wastes (OFMSW), whose global annual capita production is estimated at 85 kg. The recent environmental policies encourage their exploitation in a biorefinery loop to produce Volatile Fatty Acids (VFAs) and polyhydroxyalkanoates (PHAs). Typically, VFAs yields are high from cheese whey and OFMSW (0.55-0.90 g COD_VFAs /g COD ), lower for Olive Mill and Winery Wastewaters. The VFAs conversion into PHAs can achieve values in the range 0.4-0.5 g PHA /g VSS for cheese whey and OFMSW, 0.6-0.7 g PHA /g VSS for winery wastewater, and 0.2-0.3 g PHA /g VSS for olive mill wastewaters. These conversion yields allowed to estimate a huge potential annual PHAs production of about 260 M tons., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Logic-in-memory (LIM) circuits based on the material implication logic (IMPLY) and resistive random access memory (RRAM) technologies are a candidate solution for the development of ultra-low power non-von Neumann computing architectures. Such architectures could enable the energy-efficient implementation of hardware accelerators for novel edge computing paradigms such as binarized neural networks (BNNs) which rely on the execution of logic operations. In this work, we present the multi-input IMPLY operation implemented on a recently developed smart IMPLY architecture, SIMPLY, which improves the circuit reliability, reduces energy consumption, and breaks the strict design trade-offs of conventional architectures. We show that the generalization of the typical logic schemes used in LIM circuits to multi-input operations strongly reduces the execution time of complex functions needed for BNNs inference tasks (e.g., the 1-bit Full Addition, XNOR, Popcount). The performance of four different RRAM technologies is compared using circuit simulations leveraging a physics-based RRAM compact model. The proposed solution approaches the performance of its CMOS equivalent while bypassing the von Neumann bottleneck, which gives a huge improvement in bit error rate (by a factor of at least 10 8 ) and energy-delay product (projected up to a factor of 10 10 ).

The intentional doping of lateral GaN power high electron mobility transistors (HEMTs) with carbon (C) impurities is a common technique to reduce buffer conductivity and increase breakdown voltage. Due to the introduction of trap levels in the GaN bandgap, it is well known that these impurities give rise to dispersion, leading to the so-called "current collapse" as a collateral effect. Moreover, first-principles calculations and experimental evidence point out that C introduces trap levels of both acceptor and donor types. Here, we report on the modeling of the donor/acceptor compensation ratio (CR), that is, the ratio between the density of donors and acceptors associated with C doping, to consistently and univocally reproduce experimental breakdown voltage ( V BD ) and current-collapse magnitude (Δ I CC ). By means of calibrated numerical device simulations, we confirm that Δ I CC is controlled by the effective trap concentration (i.e., the difference between the acceptor and donor densities), but we show that it is the total trap concentration (i.e., the sum of acceptor and donor densities) that determines V BD , such that a significant CR of at least 50% (depending on the technology) must be assumed to explain both phenomena quantitatively. The results presented in this work contribute to clarifying several previous reports, and are helpful to device engineers interested in modeling C-doped lateral GaN power HEMTs.

The utilisation of urban organic waste as feedstock for polyhydroxyalkanoates (PHA) production is growing since it allows to solve the main concerns about their disposal and simultaneously to recover added-value products. A pilot scale platform has been designed for this purpose. The VFA-rich fermentation liquid coming from the anaerobic treatment of both source-sorted organic fraction of municipal solid waste (OFMSW) and waste activated sludge (WAS) has been used as substrate for the aerobic process steps: a first sequencing batch reactor (SBR, 100 L) for the selection of a PHA-producing biomass, and a second fed-batch reactor (70 L) for PHA accumulation inside the cells. The SBR was operated at 2.0-4.4 kg COD/(m 3 d) as OLR, under dynamic feeding regime (feast-famine) and short hydraulic retention time (HRT; 1 day). The selected biomass was able to accumulate up to 48% g PHA/g VSS. Both steps were performed without temperature (T) control, avoiding additional consumption of energy. In this regard, the applied OLR was tuned based on environmental T and, as a consequence, on biomass kinetic, in order to have a constant selective pressure. The latter was mainly quantified by the PHA storage yield (Y P/S feast 0.34-0.45 COD P /COD S ), which has been recognized as the main parameters affecting the global PHA productivity [1.02-1.82 g PHA/(L d)] of the process., (Copyright © 2020 Elsevier B.V. All rights reserved.)

This study focuses on the application of the concept of circular economy, with the creation of added-value marketable products and energy from organic waste while minimizing environmental impacts. Within this purpose, an urban biorefinery technology chain has been developed at pilot scale in the territorial context of the Treviso municipality (northeast Italy) for the production of biopolymers (polyhydroxyalkanoates, PHAs) and biogas from waste of urban origin. The piloting system (100-380 L) comprised the following units: a) acidogenic fermentation of the organic fraction of municipal solid waste (OFMSW) and biological sludge; b) two solid/liquid separation steps consisting of a coaxial centrifuge and a tubular membrane (0.2 μm porosity); c) a Sequencing Batch Reactor (SBR) for aerobic PHA-storing biomass production; d) aerobic fed-batch PHA accumulation reactor and e) Anaerobic co-digestion (ACoD). The thermal pre-treatment (72 °C, 48 h) of the feedstock enhanced the solubilization of the organic matter, which was converted into volatile fatty acids (VFAs) in batch mode under mesophilic fermentation conditions (37 °C). The VFA content increased up to 30 ± 3 g COD/L (overall yield 0.65 ± 0.04 g COD VFA /g VS (0) ), with high COD VFA /COD SOL (0.86 ± 0.05). The high COD VFA /COD SOL ratio enhanced the PHA-storing biomass selection in the SBR by limiting the growth of the non-storing microbial population. Under fully aerobic feast-famine regime, the selection reactor was continuously operated for 6 months at an average organic loading rate (OLR) of 4.4 ± 0.6 g COD/L d and hydraulic retention time (HRT) of 1 day (equal to SRT). The ACoD process (HRT 15 days, OLR 3.0-3.5 kg VS/m 3 d) allowed to recover the residual solid-rich overflows generated by the two solid/liquid separation units with the production of biogas (SGP 0.44-0.51 m 3 /kg VS) and digestate. An overall yield of 7.6% wt PHA/VS (0) has been estimated from the mass balance. In addition, a preliminary insight into potential social acceptance and barriers regarding organic waste-derived products was obtained., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The problem of waste disposal has recently focused on practices for waste recycling and bio-resources valorization. Organic waste produced in urban context together with biological sludge produced in wastewater treatment plants (WWTPs) can be used as renewable feedstock for the production of building blocks of different products, from biopolymers to methyl esters. This paper deals with the optimization of the fermentation process in order to transform urban organic waste (a mixture of pre-treated food waste and biological sludge) into added-value volatile fatty acid (VFA) rich stream, useful for biological processes within a biorefinery technology chain. Different temperatures, pH, hydraulic retention times (HRTs) and organic loading rates (OLRs) were tested both in batch and continuous trials. Batch tests showed the best working conditions at 37 °C and pH 9, using the bio-waste feedstock thermally pre-treated (76 h at 72 °C). These conditions were applied in continuous process, where higher HRT (6.0 d) and lower OLR [7.7 kg VS/(m 3  d)] gave the best performances in terms of process yield and maximum VFA level achieved: 0.77 COD VFA /VS (0) and 39 g COD VFA /L. An optimized fermentation process is crucial in a biorefinery perspective since it has to give a final stream of constant composition or tailored products suitable for further applications., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

BioJava is an open-source project that provides a Java library for processing biological data. The project aims to simplify bioinformatic analyses by implementing parsers, data structures, and algorithms for common tasks in genomics, structural biology, ontologies, phylogenetics, and more. Since 2012, we have released two major versions of the library (4 and 5) that include many new features to tackle challenges with increasingly complex macromolecular structure data. BioJava requires Java 8 or higher and is freely available under the LGPL 2.1 license. The project is hosted on GitHub at https://github.com/biojava/biojava. More information and documentation can be found online on the BioJava website (http://www.biojava.org) and tutorial (https://github.com/biojava/biojava-tutorial). All inquiries should be directed to the GitHub page or the BioJava mailing list (http://lists.open-bio.org/mailman/listinfo/biojava-l)., Competing Interests: The authors have declared that no competing interests exist.

: Conductive atomic force microscopy (CAFM) is one of the most powerful techniques in studying the electrical properties of various materials at the nanoscale. However, understanding current fluctuations within one study (due to degradation of the probe tips) and from one study to another (due to the use of probe tips with different characteristics), are still two major problems that may drive CAFM researchers to extract wrong conclusions. In this manuscript, these two issues are statistically analyzed by collecting experimental CAFM data and processing them using two different computational models. Our study indicates that: (i) before their complete degradation, CAFM tips show a stable state with degraded conductance, which is difficult to detect and it requires CAFM tip conductivity characterization before and after the CAFM experiments; and (ii) CAFM tips with low spring constants may unavoidably lead to the presence of a ~1.2 nm thick water film at the tip/sample junction, even if the maximum contact force allowed by the setup is applied. These two phenomena can easily drive CAFM users to overestimate the properties of the samples under test (e.g., oxide thickness). Our study can help researchers to better understand the current shifts that were observed during their CAFM experiments, as well as which probe tip to use and how it degrades. Ultimately, this work may contribute to enhancing the reliability of CAFM investigations., Competing Interests: The authors declare no conflict of interest.

In this work, we investigate the thermal and acoustic frequency responses of nanostructured thermoacoustic loudspeakers. An opposite frequency dependence of thermal and acoustic responses was found independently of the device substrate (Kapton and glass) and the nanometric active film (silver nanowires and nm-thick metal films). The experimental results are interpreted with the support of a comprehensive electro-thermo-acoustic model, allowing for the separation of the purely thermal effects from the proper thermoacoustic (TA) transduction. The thermal interactions causing the reported opposite trends are understood, providing useful insights for the further development of the TA loudspeaker technology.

Biohythane is a hydrogen-methane blend with hydrogen concentration between 10 and 30% v/v. It can be produced from different organic substrates by two sequential anaerobic stages: a dark fermentation step followed by a second an anaerobic digestion step, for hydrogen and methane production, respectively. The advantages of this blend compared to either hydrogen or methane, as separate biofuels, are first presented in this work. The two-stage anaerobic process and the main operative parameters are then discussed. Attention is focused on the production of biohythane from household food wastes, one of the most abundant organic substrate available for anaerobic digestion: the main milestones and the future trends are exposed. In particular, the possibility to co-digest food wastes and sewage sludge to improve the process yield is discussed. Finally, the paper illustrates the developments of biohythane application in the automotive sector as well as its reduced environmental burden., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The aim of this study was to verify the efficiency of a separate hydrolysis step by testing different working temperatures (37-55°C) and hydraulic retention times (two, four and six days) and by evaluating readily biodegradable carbon production. The fermentation products included primarily acetic, propionic and butyric acids. These acids can be easily converted into biogas or can be recovered in a biorefinery approach, for example, to produce polyhydroxyalkanoates. The optimal condition was found by applying an organic loading rate of 17.9gTVSm -3 with a four-day retention time at 37°C for an acidification yield of 183.2gCOD VFA kgVS fed -1 ., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Deep separate collection of the organic fraction of municipal solid waste generates streams with relatively low content of inert material and high biodegradability. This material can be conveniently treated to recovery both energy and material by means of simplified technologies like screw-press and extruder: in this study, the liquid fraction generated from pressed biowaste from kerbside and door-to-door collection was anaerobically digested in both mesophilic and thermophilic conditions while for the solid fraction composting is suggested. Continuous operation results obtained both in mesophilic and thermophilic conditions indicated that the anaerobic digestion of pressed biowaste was viable at all operating conditions tested, with the greatest specific gas production of 0.92m(3)/kgVSfed at an organic loading rate of 4.7kgVS/m(3)d in thermophilic conditions. Based on calculations the authors found that the expected energy recovery is highly positive. The contents of heavy metals and pathogens of fed substrate and effluent digestates were analyzed, and results showed low levels (below End-of-Waste 2014 criteria limits) for both the parameters thus indicating the good quality of digestate and its possible use for agronomic purposes. Therefore, both energy and material were effectively recovered., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The complete genomic sequence of the dairy Lactobacillus helveticus bacteriophage ΦAQ113 was determined. Phage ΦAQ113 is a Myoviridae bacteriophage with an isometric capsid and a contractile tail. The final assembled consensus sequence revealed a linear, circularly permuted, double-stranded DNA genome with a size of 36,566 bp and a G+C content of 37%. Fifty-six open reading frames (ORFs) were predicted, and a putative function was assigned to approximately 90% of them. The ΦAQ113 genome shows functionally related genes clustered together in a genome structure composed of modules for DNA replication/regulation, DNA packaging, head and tail morphogenesis, cell lysis, and lysogeny. The identification of genes involved in the establishment of lysogeny indicates that it may have originated as a temperate phage, even if it was isolated from natural cheese whey starters as a virulent phage, because it is able to propagate in a sensitive host strain. Additionally, we discovered that the ΦAQ113 phage genome is closely related to Lactobacillus gasseri phage KC5a and Lactobacillus johnsonii phage Lj771 genomes. The phylogenetic similarities between L. helveticus phage ΦAQ113 and two phages that belong to gut species confirm a possible common ancestral origin and support the increasing consideration of L. helveticus as a health-promoting organism.

The survival of a species depends on its capacity to adjust to changing environmental conditions, and new stressors. Such new, anthropogenic stressors include the neonicotinoid class of crop-protecting agents, which have been implicated in the population declines of pollinating insects, including honeybees (Apis mellifera). The low-dose effects of these compounds on larval development and physiological responses have remained largely unknown. Over a period of 15 days, we provided syrup tainted with low levels (2 µg/L(-1)) of the neonicotinoid insecticide imidacloprid to beehives located in the field. We measured transcript levels by RNA sequencing and established lipid profiles using liquid chromatography coupled with mass spectrometry from worker-bee larvae of imidacloprid-exposed (IE) and unexposed, control (C) hives. Within a catalogue of 300 differentially expressed transcripts in larvae from IE hives, we detect significant enrichment of genes functioning in lipid-carbohydrate-mitochondrial metabolic networks. Myc-involved transcriptional response to exposure of this neonicotinoid is indicated by overrepresentation of E-box elements in the promoter regions of genes with altered expression. RNA levels for a cluster of genes encoding detoxifying P450 enzymes are elevated, with coordinated downregulation of genes in glycolytic and sugar-metabolising pathways. Expression of the environmentally responsive Hsp90 gene is also reduced, suggesting diminished buffering and stability of the developmental program. The multifaceted, physiological response described here may be of importance to our general understanding of pollinator health. Muscles, for instance, work at high glycolytic rates and flight performance could be impacted should low levels of this evolutionarily novel stressor likewise induce downregulation of energy metabolising genes in adult pollinators.

The paper reports the findings of a two-year pilot scale experimental trial for the mesophilic (35°C), thermophilic (55°C) and temperature phased (65+55°C) anaerobic digestion of waste activated sludge. During the mesophilic and thermophilic runs, the reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 20 days. In the temperature phased run, the first reactor operated at an organic loading rate of 15 kgVS/m(3)d and a hydraulic retention time of 2 days while the second reactor operated at an organic loading rate of 2.2 kgVS/m(3)d and a hydraulic retention time of 18 days (20 days for the whole temperature phased system). The performance of the reactor improved with increases in temperature. The COD removal increased from 35% in mesophilic conditions, to 45% in thermophilic conditions, and 55% in the two stage temperature phased system. As a consequence, the specific biogas production increased from 0.33 to 0.45 and to 0.49 m(3)/kgVS(fed) at 35, 55, and 65+55°C, respectively. The extreme thermophilic reactor working at 65°C showed a high hydrolytic capability and a specific yield of 0.33 g COD (soluble) per gVS(fed). The effluent of the extreme thermophilic reactor showed an average concentration of soluble COD and volatile fatty acids of 20 and 9 g/l, respectively. Acetic and propionic acids were the main compounds found in the acids mixture. Because of the improved digestion efficiency, organic nitrogen and phosphorus were solubilised in the bulk. Their concentration, however, did not increase as expected because of the formation of salts of hydroxyapatite and struvite inside the reactor., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The paper presents the results of a study focused on the occurrence and removal of dioxins and furans (PCDD/F) and poly-chlorinated biphenyls (PCB) in both conventional and membrane wastewater treatment processes. It was found that the conventionally activated sludge process could perform a good removal of PCDDs/Fs and PCBs, but the relatively low solid retention time applied and the presence of suspended solids in the effluent limited the removal capability of the system. On the other hand, the membrane bioreactor was capable of perfectly removing PCDDs/Fs and PCBs giving an effluent characterised by concentrations under the limit of detection for most of the tested compounds. This efficiency was the result of both the solids removal from the effluent (permeate) and the application of prolonged solid retention times which enabled the bioconversion of those compounds as demonstrated by the mass balances. A mathematical model was developed to predict the final fate of a given molecule according to the operational conditions applied in the wastewater treatment process., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

Two quantitative trait loci (Fr-H1 and Fr-H2) for frost tolerance (FT) have been discovered on the long arm of chromosome 5H in barley. Two tightly linked groups of CBF genes, known to play a key role in the FT regulatory network in A. thaliana, have been found to co- segregate with Fr-H2. Here, we investigate the allelic variations of four barley CBF genes (HvCbf3, HvCbf6, HvCbf9 and HvCbf14) in a panel of European cultivars, landraces and H. spontaneum accessions. In the cultivars a reduction of nucleotide and haplotype diversities in CBFs compared with the landraces and the wild ancestor H. spontaneum, was evident. In particular, in cultivars the loss of HvCbf9 genetic variants was higher compared to other sequences. In order to verify if the pattern of CBF genetic variants correlated with the level of FT, an association procedure was adopted. The pairwise analysis of linkage disequilibrium (LD) among the genetic variants in four CBF genes was computed to evaluate the resolution of the association procedure. The pairwise plotting revealed a low level of LD in cultivated varieties, despite the tight physical linkage of CBF genes analysed. A structured association procedure based on a general liner model was implemented, including the variants in CBFs,of Vrn-H1, and of two reference genes not involved in FT (alpha-Amy1 and Gapdh) and considering the phenotypic data for FT. Association analysis recovered two nucleotide variants of HvCbf14 and one nucleotide variant of Vrn-H1 as statistically associated to FT.

A pilot scale experimentation of a membrane bioreactor has been progressing since 1999 at Fusina-Venice wastewater treatment plant. Results showed that the limits introduced by Law Decree 30 July 1999 (Decree "Ronchi-Costa") can be fulfilled (except for Arsenic) and treated water is suitable for reuse purposes. According to the results reported in this paper, sizing and involved costs for the membranes application at Fusina wastewater treatment plant are presented. This can be the proper engineering solution for the Integrated Project Fusina.