Search

Background and Purpose: Cone beam computed tomography (CBCT) is routinely used in radiotherapy to localize target volume. The aim of our study was to determine the biological effects of CBCT dose compared to subsequent therapeutic dose by using in vitro chromosome dosimetry., Materials and Methods: Peripheral blood samples from five healthy volunteers were irradiated in two phantoms (water filled in-house made cylindrical, and Pure Image CTDI phantoms) with 6 MV FFF X-ray photons, the dose rate was 800 MU/min and the absorbed doses ranged from 0.5 to 8 Gy. Irradiation was performed with a 6 MV linear accelerator (LINAC) to generate a dose-response calibration curve. In the first part of the investigation, 1-5 CBCT imaging was used, in the second, only 2 Gy doses were delivered with a LINAC, and then, in the third part, a combination of CBCT and 2 Gy irradiation was performed mimicking online adapted radiotherapy treatment. Metaphases were prepared from lymphocyte cultures, using standard cytogenetic techniques, and chromosomal aberrations were evaluated. Estimate doses were calculated from chromosome aberrations using dose-response curves., Results: Samples exposed to X-ray from CBCT imaging prior to treatment exhibited higher chromosomal aberrations and Estimate dose than the 2 Gy therapeutic (real) dose, and the magnitude of the increase depended on the number of CBCTs: 1-5 CBCT corresponded to 0.04-0.92 Gy, 1 CBCT + 2 Gy to 2.32 Gy, and 5 CBCTs + 2 Gy to 3.5 Gy., Conclusion: The estimated dose based on chromosomal aberrations is 24.8% higher than the physical dose, for the combination of 3 CBCTs and the therapeutic 2 Gy dose, which should be taken into account when calculating the total therapeutic dose that could increase the risk of a second cancer. The clinical implications of the combined radiation effect may require further investigation., (© 2024. The Author(s).)

We present evaluation of junction of coplanar external beam photon fields and its portal dosimetric analysis for breast cancer with positive lymph nodes. In our work, we compared twelve patients affected by breast cancer with axillary and supraclavicular lymph nodes, using conformal external beam plans from a dosimetric point of view. 3-3 plans were prepared per patient. Three methods were used for the conformal technique to investigate the potential of lymph nodes treatment field's collimations. During the evaluation of the portal dosimetry images, it was concluded that the junction plane at isocenter appeared as a discrete coldline, when fitted the regional field with or without collimation manually and by the software. However, the coverage of the isocenter plane is strongly influenced by the linear accelerator and the fitted field edges. Based on our results, in order to avoid uncertainties arising from field junctions and the overdosed areas of the target volume, it is more appropriate to choose another advanced irradiation technique such as intensity-modulated radiation therapy.

Varian Halcyon (HA) linear accelerators (LINAC) require kilovoltage cone-beam computed tomography (CT) acquisition for all patients before all treatment fractions. The aim of this study is to compare dose indices of various available protocols with different calculation and measurement methods. CT dose index (CTDI) in mGy is a measure of the radiation dose output of a CT scanner. A pencil ionisation chamber was used to measure dose index free air and in a standard CTDI phantom for different imaging protocols of HA and TrueBeam LINACs. For the point measurements, we found large deviations between displayed and calculated low CTDI values: 26.6 and 27.1% at Head low dose and Breast protocol, respectively. The calculated values were always larger than the displayed ones for all protocols and measurement setups. For the point measurements similar results were found as in the international literature, where the displayed values the measured CTDIs., (© The Author(s) 2023. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

Background: The purpose of the study was to dosimetrically compare multicatheter interstitial brachytherapy (MIBT) and stereotactic radiotherapy with CyberKnife (CK) for accelerated partial breast irradiation with special focus on dose to organs at risk (OARs)., Materials and Methods: Treatment plans of thirty-one patients treated with MIBT were selected and additional CK plans were created on the same CT images. The OARs included ipsilateral non-target and contralateral breast, ipsilateral and contralateral lung, skin, ribs, and heart for left sided cases. The fractionation was identical (4 × 6.25 Gy). Dose-volume parameters were calculated for both techniques and compared., Results: The D90 of the PTV for MIBT and CK were similar (102.4% vs . 103.6%, p = 0.0654), but in COIN the MIBT achieved lower value (0.75 vs . 0.91, p < 0.001). Regarding the V100 parameter of non-target breast CK performed slightly better than MIBT (V100: 1.1% vs . 1.6%), but for V90, V50 and V25 MIBT resulted in less dose. Every examined parameter of ipsilateral lung, skin, ribs and contralateral lung was significantly smaller for MIBT than for CK. Protection of the heart was slightly better with MIBT, but only the difference of D2cm 3 was statistically significant (17.3% vs . 20.4%, p = 0.0311). There were no significant differences among the dose-volume parameters of the contralateral breast., Conclusion: The target volume can be properly irradiated by both techniques with high conformity and similar dose to the OARs. MIBT provides more advantageous plans than CK, except for dose conformity and the dosimetry of the heart and contralateral breast. More studies are needed to analyze whether these dosimetrical findings have clinical significance., Competing Interests: Conflicts of interest The authors report no conflict of interest., (© 2022 Greater Poland Cancer Centre.)

Brachytherapy (BT) and external beam radiotherapy (EBRT) apply different dose rates, overall treatment times, energies and fractionation. However, the overall impact of these variables on the biological dose of blood is neglected. As the size of the irradiated volume influences the biological effect as well, we studied chromosome aberrations (CAs) as biodosimetric parameters, and explored the relationship of isodose surface volumes (ISVs: V 1% , V 1Gy , V 10% , V 10Gy , V 100% , V 150% ) and CAs of both irradiation modalities. We performed extended dicentrics assay of lymphocytes from 102 prostate radiotherapy patients three-monthly for a year. Aberration frequency was the highest after EBRT treatment. It increased after the therapy and did not decrease significantly during the first follow-up year. We showed that various types of CAs 9 months after LDR BT, 3 months after HDR BT and in a long time-range (even up to 1 year) after EBRT positively correlated with ISVs. Regression analysis confirmed these relationships in the case of HDR BT and EBRT. The observed differences in the time points and aberration types are discussed. The ISVs irradiated by EBRT showed stronger correlation and regression relationships with CAs than the ISVs of brachytherapy., (© 2021. The Author(s).)

Background: The aim of the study was to dosimetrically compare multicatheter interstitial brachytherapy (MIBT) and stereotactic radiotherapy with CyberKnife (CK) for accelerated partial breast irradiation (APBI) especially concerning the dose of organs at risk (OAR-s)., Patients and Methods: Treatment plans of thirty-two MIBT and CK patients were compared. The OAR-s included ipsilateral non-target and contralateral breast, ipsilateral and contralateral lung, skin, ribs, and heart for left-sided cases. The fractionation was identical (4 x 6.25 Gy) in both treatment groups. The relative volumes (e.g. V100, V90) receiving a given relative dose (100%, 90%), and the relative doses (e.g. D0.1cm 3 , D1cm 3 ) delivered to the most exposed small volumes (0.1 cm 3 , 1 cm 3 ) were calculated from dose-volume histograms. All dose values were related to the prescribed dose (25 Gy)., Results: Regarding non-target breast CK performed slightly better than MIBT (V100: 0.7% vs . 1.6%, V50: 10.5% vs . 12.9%). The mean dose of the ipsilateral lung was the same for both techniques (4.9%), but doses irradiated to volume of 1 cm 3 were lower with MIBT (36.1% vs . 45.4%). Protection of skin and rib was better with MIBT. There were no significant differences between the dose-volume parameters of the heart, but with MIBT, slightly larger volumes were irradiated by 5% dose (V5: 29.9% vs . 21.2%). Contralateral breast and lung received a somewhat higher dose with MIBT (D1cm 3 : 2.6% vs . 1.8% and 3.6% vs . 2.5%)., Conclusions: The target volume can be properly irradiated by both techniques with similar dose distributions and high dose conformity. Regarding the dose to the non-target breast, heart, and contralateral organs the CK was superior, but the nearby organs (skin, ribs, ipsilateral lung) received less dose with MIBT. The observed dosimetric differences were small but significant in a few parameters at the examined patient number. More studies are needed to explore whether these dosimetric findings have clinical significance., (© 2021 András Herein, Gábor Stelczer, Csilla Pesznyák, Georgina Fröhlich, Viktor Smanykó, Norbert Mészáros, Csaba Polgár, Tibor Major, published by Sciendo.)

Flattening filter free mode (FFF) has been introduced in radiotherapy during the past decades, however, not much has been reported on its radiobiological effect. The purpose of our study was to compare the radiobiological effects of flattening filter and flattening filter free photon beams on chromosomal aberrations in peripheral blood lymphocytes. In our study the blood of the same healthy donor was irradiated with linear accelerator using both conventional flattening filter (FF) and FFF photon beams at dose rate of 3.57-23.08 Gy/min, using 6 or 10 MV. The dose-response calibration curves for dicentric + ring chromosomes induced by irradiation were fitted with linear-quadratic model. CABAS (Chromosomal Aberration Calculation Software) was used to prepare the curves. The coefficients and equations of the curves were calculated and compared with the results of other authors. We found significant differences in the number of aberrations at different irradiation parameters. Based on our results, FFF mode has a 10-20% higher biological effect than FF mode. These results can be used during radiotherapy or to estimate the biological doses in case of an accidental exposure to radiation.

The aim of the study was to compare the different stereotactic treatment plans and dose calculation algorithms for small targets with film dosimetry in anthropomorphic phantom. Treatment plans were prepared for multiple targets with single setup isocenter. Plans for three different irradiation techniques were generated using conformal arc with four non-coplanar arcs, RapidArc with two coplanar full arcs and RapidArc with four non-coplanar arcs in the Varian Eclipse v13.7.16 TPS. Conformal arc and RapidArc plans were calculated using AAA, Acuros XBDm and XBDw algorithms. Conformity index, gradient index and dose maximum were calculated for all PTVs. All measurements were made on the Varian TrueBeam linear accelerator. Comparison between computed and measured dose distributions was performed with gamma evaluation criteria of 3%, 3 mm; 3%, 1 mm and 2%, 2 mm. According to our results, the Eclipse AAA and AXB algorithms provide accurate dose distributions for homogeneous cranial irradiation.

Purpose: Automatizing the scoring of the cytokinesis-blocked micronucleus assay spares a lot of valuable time. The dose-effect relationship can be applied reliably for dose estimation if the quality of the slides is the same from the perspective of the used image processing algorithm. This aspect brings in additional requirements against the quality of the slides compared to the conventional visual scoring., Materials and Methods: An add-in software was created to the non-fluorescent RS-MN automatic MN scoring system which is capable of measuring quantitatively the degree of typical anomalies. The image processing is less reliable when the presence of these anomalies is more frequent. The behavior of the designed sample quality parameters (SQPs) was tested on in vitro irradiated peripheral blood samples (0, 1, and 2 Gy) obtained from a healthy donor and also on samples from patients undergoing low dose-rate brachytherapy., Results: We examined 20 different SQPs and identified two that are independent and correlate significantly with the error of the fully automatic MN frequency. One is related to the size of the cells and the other reflects the homogeneity of the environment. An equation was established which presents a connection between the error of the auto MN frequency and the SQPs. By adding a fourth cleaning step to the conventional sample preparation and changing the pre-dripping temperature of the slide, the SQP can be modified, and consequently, the sample quality can be improved. The gain in accuracy is 54 ± 10 MN per 1000 binucleated cells, which corresponds to the effects of 0.5 Gy. Around the lowest limit of detection (<0.5 Gy), it means a 50-100% drop in the error of dose, which is significant. With sample quality harmonization, the positive predictive value was raised to 80-93% depending on the dose., Conclusions: With the technique described in this paper, the suitability for automated scoring of a micronucleus slide can be tested quantitatively and objectively. A method is presented with which in some cases the uncertainty of the assessed doses due to variance in sample quality can be decreased or if it is not possible its bias can be predicted. The proposed protocol leads to more reliable estimation of dose. The SQPs are designed in a way that they have the potential to be adapted to similar systems.

Introduction The purpose of the study was to compare the results of gamma value based film analysis according to the used type of self-developer film and software product. Material and methods The films were irradiated with different treatment techniques such as 3D conformal and intensity modulated radiotherapy with static and rotational delivery. Stereotactic plans with conformal and intensity modulated arc techniques, using coplanar and non-coplanar beam setup were also evaluated. The data of irradiated film were compared with the planned planar dose distribution exported from the treatment planning system. Three film analysis software programs were evaluated: PTW Mephysto (PTW), FilmQA Pro (FQP) and radiohromic.com(RC). Both EBT2 and EBT3 types of films were examined. The comparisons of dose distributions were performed with gamma analysis using 10% cut-off level. Results The results of the gamma analysis for larger fields were between 78.3% and 98.3%, 75.7% and 100%, 80.2% and 98.8% with PTW, FQP and RC, respectively. The results of evaluation in case of stereotactic measurements were 76.8%-99.2% for PTW, 95.7%-100% for FQP and 91.2%-99.9% for RC. Conclusions All the three software programs are suitable for calibrating and evaluating films, performing gamma analysis, and can be used for patient specific quality assurance measurements. There is no direct connection between gamma passing rate and absolute accuracy or software quality, it is just a feature of the software. The interpretation of own results has to be defined on an institutional level according to given workflow and preliminary results.

Purpose: Our aim was to design a compact and cost-effective optical microscopic system for automated non-fluorescent micronucleus (MN) scoring whose performance can reach the accuracy of visual scoring with the help of minimal user interaction and also gives an option for fully automatic scoring with an accuracy suitable for triage purposes. Materials and methods: The concept of Radometer MN-Series (RS-MN) microscopic system designed by Radosys was to develop hardware and software layers in parallel in order to optimize the performance in automated MN scoring. A MN assay slide is automatically scanned by the RS-MN then the binucleated cells and micronuclei are automatically identified. Processing 1000 cells takes 10-60 minutes by automatic scoring (scanning plus image processing) depending on sample quality and required accuracy. The manual revision of the cell gallery takes an extra 10 minutes per sample. Dose response curves are determined for manual, automatic and semi-automatic scoring methods. Results: The combination of object-sensitive autofocusing method and the multi-layer image acquisition is able to reduce the minimum resolvable dose by 14%. The MN yields obtained from the manual, semi-automatic and automatic scoring methods are well correlating (Pearson's correlation coefficients are between 0.977 and 0.998). In order to compare the reliability of the results of visual and automatic scoring, an extended analysis on uncertainty contributors was performed. For a dose of 1 Gy, the estimated relative uncertainty from the Poisson characteristics of MN yield is 17-19% for the manual and 20-38% for the automated scoring. Other uncertainty factors (differences in donor radiosensitivity, scorer performance, and sample preparations) can contribute to this error fall within a similar range: 3-16%. Taking into account all of the possible uncertainties, the minimum resolvable dose for the manual (0.48 Gy) is the two-thirds of that of the automatic scoring (0.61 Gy). Conclusions: The results verify that the fully automatic mode of RS-MN is suitable for triage purposes. The performance of the user interacted semi-automatic mode is comparable with the reference manual scoring. Its performance reaches up to other non-fluorescent automatic systems and offers a compact and cost-effective alternative.

The aim of this study was to investigate the radiobiological effects of flattening filter (FF) and flattening filter-free (FFF) modes of linear electron accelerators and to understand whether there is any difference between the effects of these modes. We evaluated the number of chromosome aberrations following irradiation of lymphocytes from healthy volunteers with X-ray photons at two energy levels, 6 and 10 MV; the dose rate ranged between 5.50 and 23.08 Gy/min and absorbed doses ranged between 0.5 and 8 Gy. A 60Co curve was employed for comparison. Metaphases from the lymphocyte cultures were prepared using standard cytogenetic techniques and chromosome analysis was performed. Our results allow the performance of biodosimetry at higher energies and doses than the currently used reference dosimetry. We observed significant differences in aberration frequencies when different irradiation techniques were used. FFF mode has a higher radiobiological effect than the FF mode. Linear-quadratic dose response calibration curves were constructed and relative biological effectiveness (RBE) values were calculated. Average RBE values using 6 MV (5.50 Gy/min) as a reference radiation were 1.28 for 60Co γ irradiation, 1.11 for 6 FFF and 0.79-0.92 for 10 FFF. Since there are compelling differences between radiation modalities in cases of hypofractionation, these results may be even more important in a therapeutic situation. In case of an accidental overdose of a patient, use of the appropriate calibration curves for biodosimetry are also essential for quantifying the overdose., (© The Author(s) 2019. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

Aim: The aim of this study was to investigate normal tissue sparing through dosimetric parameters of normal tissue volumes using different irradiation techniques for conventional (CFRT) and simultaneously integrated boost (SIB) schedules., Background: Several dose-escalation studies for localized prostate cancer (PCa) have shown advanced biochemical relapse-free (bRFS) rates and also better local control for higher total doses using either CFRT or SIB schedules. Besides the most important organs-at-risk, absorbed dose reduction of other surrounding normal tissues are also preferable. In order to analyse the normal tissue sparing, dosimetric parameters of different normal tissue volumes were examined., Materials and Methods: Treatment plans for 15 high risk prostate cancer patients were created using RapidArc (RA), Sliding Window (SW) IMRT and 4-field box (3D-CRT) technique. In order to evaluate normal tissue sparing, the volume of pelvic region was divided into six normal tissue cylinders with 1 cm wall thickness, located in each other., Results: All plans met the criteria of target coverage (V95%>95%). All techniques provided the same results for OARs except 3D-CRT for rectum and bilateral femoral heads. The values of V5, V10 and V15 increased in cases which included RapidArc technique and decreased for V20 and V30., Conclusions: The dosimetric parameters for the cylindrical normal tissue volumes show that using RapidArc technique gives equal or slightly better normal tissue sparing and SIB provided the same normal tissue sparing as CFRT planned with RapidArc., (© 2019 Greater Poland Cancer Centre. Published by Elsevier B.V. All rights reserved.)

Introduction: Verifying the patient position is always an essential part of the treatment process, especially in hypofractionated treatments such as accelerated partial breast irradiation (APBI). The purpose of the study was to compare five image guidance techniques with respect to imaging dose and image quality., Methods and Materials: We chose five types of imaging methods applicable for APBI and measured their dose exposure on four different accelerators (Synergy, TrueBeam, Artiste and CyberKnife). Absorbed dose was measured with ionization chamber in thorax phantom. Besides dose exposure image quality was also compared., Results: The lowest dose exposure was measured with kV-kV planar imaging followed by kV-CBCT, MV-MV pair and MV-CBCT in ascending order. Average phantom dose with kV-kV image pair on CyberKnife was 0.01 cGy as the lowest and with MV-CBCT on Artiste was 7.11 cGy as the highest. Average dose exposures of MV-MV images with TrueBeam, Synergy and Artiste were 1.18 cGy, 2.13 cGy and 1.61 cGy, respectively, with similar image quality. For the same machines the doses of kV-CT imaging were comparable: 0.65 cGy, 0.65 cGy and 0.52 cGy, with some differences in image quality. MV-CBCT technique resulted in the highest dose and poorest image quality., Conclusions: In APBI the position of the patient and tumour bed can be verified with many tools. When fiducials are available, often 2D imaging is enough to achieve appropriate positioning and the kV-kV method is recommended. Imaging with 2.5MV can also be a good solution instead of 6MV. Without fiducials 3D images should be acquired and the recommended method is the kV-CBCT., (Copyright © 2019 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

Our goal was to determine the extent of the CTV-PTV margin. Accuracy of patient setup was checked with daily CBCT. Two radiation oncologists performed the image matching independently. The CTV-PTV margin was calculated with the van Herk formula. The treatment plans were created with the Varian Eclipse v11 planning system, and the treatments were carried out with a Varian TrueBeam accelerator by using RapidArc technique with two full arcs. Dose constraints on the target volume and organs at risk recommended by international bodies were applied. Conformity number (CN) for PTV, V45 and V50 for organs at risk were used to assess and compare the treatment plans of RapidArc and 3D-KRT (conformal radiotherapy) techniques. The average CTV-PTV margins with or without IGRT were 0.67 cm vs. 1.53 cm, 0.66 cm vs. 1.25 cm and 0.34 cm vs. 0.98 cm in vertical, longitudinal and lateral directions, respectively. In case of daily on-line CBCT verification 0.5 cm margin can be used.

Background The aim of the study was to evaluate and compare four different external beam radiotherapy techniques of accelerated partial breast irradiation (APBI) considering target coverage, dose to organs at risk and overall plan quality. The investigated techniques were three dimensional conformal radiotherapy (3D-CRT), "step and shoot" (SS) and "sliding window" (SW) intensity-modulated radiotherapy (IMRT), intensity-modulated arc therapy (RA). Patients and methods CT scans of 40 APBI patients were selected for the study. The planning objectives were set up according to the international recommendations. Homogeneity, conformity and plan quality indices were calculated from volumetric and dosimetric parameters of target volumes and organs at risk. The total monitor units and feasibility were also investigated. Results There were no significant differences in the coverage of the target volume between the techniques. The homogeneity indices of 3D-CRT, SS, SW and RA plans were 0.068, 0.074, 0.058 and 0.081, respectively. The conformation numbers were 0.60, 0.80, 0.82 and 0.89, respectively. The V50% values of the ipsilateral breast for 3D-CRT, SS, SW and RA were 47.5%, 40.2%, 39.9% and 31.6%, respectively. The average V10% and V40% values of ipsilateral lung were 13.1%, 28.1%, 28%, 36% and 2.6%, 1.9%, 1.9%, 3%, respectively. The 3D-CRT technique provided the best heart protection, especially in the low dose region. All contralateral organs received low doses. The SW technique achieved the best plan quality index (PQI). Conclusions Good target volume coverage and tolerable dose to the organs at risk are achievable with all four techniques. Taking into account all aspects, we recommend the SW IMRT technique for APBI.

Background The aim of the study was to present dosimetric comparison of image guided high-dose-rate brachytherapy (IGBT) with volumetric modulated arc therapy (VMAT) for head and neck cancer regarding conformity of dose distribution to planning target volume (PTV) and doses to organs at risk (OARs). Patients and methods Thirty-eight consecutive patients with T1-4 mobile tongue, floor of mouth and base of tongue cancer treated with IGBT were selected. For these patients additional VMAT treatment plans were also prepared using identical computed tomography data. OARs and PTV related parameters (e.g. V98, D0.1cm3, Dmean, etc.) were compared. Results Mean V98 of the PTV was 90.2% vs. 90.4% (p > 0.05) for IGBT and VMAT, respectively. Mean D0.1cm3 to the mandible was 77.0% vs. 85.4% (p < 0.05). Dmean to ipsilateral and contralateral parotid glands was 4.6% vs. 4.6% and 3.0% vs. 3.9% (p > 0.05). Dmean to ipsilateral and contralateral submandibular glands was 16.4% vs. 21.9% (p > 0.05) and 8.2% vs. 16.9% (p < 0.05), respectively. Conclusions Both techniques showed excellent target coverage. With IGBT dose to normal tissues was lower than with VMAT. The results prove the superiority of IGBT in the protection of OARs and the important role of this invasive method in the era of new external beam techniques.

Objective: To dosimetrically compare multicatheter interstitial brachytherapy (MIBT) and intensity modulated radiotherapy (IMRT) for accelerated partial breast irradiation (APBI) with special focus on dose to normal tissues and organs at risk (OAR-s)., Material and Methods: Thirty-four patients with early stage breast cancer treated with MIBT were selected for the study. For each patient an additional IMRT treatment plan was created using the same CT data and contours as used in MIBT plans. OAR-s included ipsilateral non-target and contralateral breast, lung of both sides, skin, ribs and heart for left sided lesions. The CTV was created from the outlined lumpectomy cavity with a total margin (surgical+radiation) of 20mm in six main directions. The PTV in IMRT plans was generated from CTV with an addition of isotropic 5mm margin. The prescribed dose was 30.1Gy with 7×4.3Gy fractionation for both techniques. From dose-volume histograms quality parameters including volumes receiving a given dose (e.g. V100, V90, V50) and doses to specified volumes (e.g. D 0.01cm 3 , D 0.1cm 3 , D 1cm 3 ) were calculated and compared., Results: Except for high dose, non-target breast received less dose with MIBT. V90 was 3.6% vs. 4.8% and V50 was 13.7% vs. 25.5% for MIBT and IMRT, respectively. Ipsilateral lung was spared better with MIBT. Mean lung dose was 5.1% vs. 7.1%, [Formula: see text] was 39.0% vs. 54.3% and V5 was 32.9% vs. 41.7% in favour of MIBT. For left sided lesions the heart was generally irradiated by larger doses with MIBT. Mean heart dose was 4.5% vs. 2.0% and [Formula: see text] was 18.3% vs. 19.7%, correspondingly. Volumetric maximal skin doses were similar, but regarding dose to 0.1cm 3 and 1cm 3 of most exposed volume MIBT provided significantly less doses (76.6% vs. 94.4% and 60.2% vs. 87.8%, respectively). Ribs received less dose with MIBT with values of 45.6% vs. 69.3% for [Formula: see text] and 1.4% vs. 4.2cm 3 for V50. Dose to contralateral breast and lung was low with both techniques. No significant differences were observed in maximal doses, but dose to volumes of 0.1cm 3 and 1cm 3 were less with MIBT for both organs. [Formula: see text] was 3.2% vs. 6.7% for breast and 3.7% vs. 5.6% for lung with MIBT and IMRT, respectively., Conclusions: The target volume can be appropriately irradiated by both techniques, but MIBT generally spares normal tissues and organs at risk better than IMRT. Except for the heart, other critical structures receive less doses with brachytherapy. To observe whether these dosimetric findings translate into clinical outcome more studies are needed with assessment of toxicity profiles., (Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.)

The aim of this article is to evaluate and compare four different radiotherapy techniques of accelerated partial breast irradiation (APBI) considering planning quality, dosimetric and practical aspects. The investigated techniques are three dimensional conformal radiotherapy (3D-CRT), "step and shoot" (SS) and "sliding window" (SW) intensity-modulated radiotherapy, intensity-modulated arc therapy (RA). CT scans of 10 patients previously treated with APBI were selected for the study. Surgical clips were placed on the borders of the tumour bed during breast conserving surgery. Target volume (PTV) was defined as enlarged CTV, which was created from the tumour bed through volume expansion using individual margins. Planning objectives were set up according to the international recommendations. Non-coplanar fields were used only for the 3D-CRT plans. For each plan homogeneity, conformity and plan quality indices were calculated from volumetric and dosimetric parameters of target volumes and organs at risk. The total monitor units and feasibility were also investigated. There was no significant difference in the coverage of the target volume by the prescribed dose between the techniques. SW plans were significantly more homogeneous (HI=0.033) than the 3D-CRT (HI=0.057) and the RA (HI=0.073) plans. The homogeneity of the SS technique (HI=0.053) did not differ significantly compared to others. The conformity of the 3D-CRT technique was significantly worse (CN=0.62) than that of SS (CN=0.85), SW (CN=0.85) and RA (CN=0.86) plans. There was a significant difference between RA (29.4%) and 3D-CRT (44.1%) and SW (35.6%) plans in the V50% of the ipsilateral breast. Mean V10% of the ipsilateral lung in 3D-CRT (10.1%) plans was significantly lower than in SS (34.3%), SW (34.3%) and RA (35.3%) plans. 3D-CRT technique provided the best heart protection. The shortest treatment times were achieved with RA technique. Good target volume coverage and tolerable dose to the organs at risk are achievable with all four techniques. Taking into account all the aspects, we recommend the sliding window IMRT technique for accelerated partial breast irradiation.

The purpose of the study was to investigate the physical properties of the EBT2 radiochromic films and define the conditions of its clinical applicability. We irradiated the films with different treatment techniques 3D conformal (3DCRT), intensity-modulated (IMRT) and stereotactic body radiotherapy with arc therapy (SBRT), and then compared the data with the dose distribution exported from the treatment planning system (Eclipse). Two film analysis softwares were investigated for the comparison: PTW Mephysto and FilmQA Pro. The comparisons of dose distributions were performed with gamma analysis, and the gamma criterion was 3%, 3mm, and 2%, 2mm. The gamma analysis results by the two programs were the following, (PTW/FilmQA Pro) with 3%, 3mm gamma criterion: 3DCRT (95,5/100%), IMRT (97/99,9%), SBRT (99,7/100%). In case of 2%, 2mm the results were: 3DCRT (87,1/98,9%), IMRT (92/98,5%), SBRT (96,7/97,9%). Based on the results it can be stated that during proper use, the features of the scanner do not affect the results. Both evaluation softwares are suitable for calibrating and evaluating films, moreover, performing the gamma analysis. The EBT2 film is suitable for the two-dimensional controlling of radiation therapy plans.

The aim of our work is to present the imaging techniques used at the National Institute of Oncology for taking into consideration the breathing motion at radiation therapy treatment planning. Internationally recommended imaging techniques, such as 4D CT, respiratory gating and ITV (Internal Target Volume) definition were examined. The different imaging techniques were analysed regarding the delivered dose during imaging, the required time to adapt the technique, and the necessary equipment. The differences in size of PTVs (Planning Target Volume) due to diverse volume defining methods were compared in 5 cases. For 4D CT breath monitoring is crucial, which requires special equipment. To decrease the relatively high exposure of 4D CT it is possible to scan only a few predefined breathing phases. The possible positions of the tumour can be well approximated with CT scans taken in the inhale maximum, the exhale maximum and in intermediate phase. The intermediate phase can be exchanged with an ordinary CT image set, and the extreme phase CT images can be ensured by given verbal instructions for the patient. This way special gating equipment is not required. Based on these 3 breathing phases an ITV can be defined. Using this ITV definition method the margin between the CTV (Clinical Target Volume) and the PTV can be reduced by 1 cm. Using this imaging protocol PTV can be reduced by 30%. A further 10% PTV reduction can be achieved with respiratory gating. In the routine clinical practice respiratory motion management with a 3-phase CT-imaging protocol the PTV for early-stage lung cancer can be significantly reduced without the use of 4D CT and/or respiratory gating. For special, high precision treatment techniques 4D CT is recommended.

The purpose of our work was to compare intraoperative and four-week post-implant dosimetry for loose and stranded seed implants for permanent prostate implant brachytherapy. In our institute low-dose-rate (LDR) prostate brachytherapy is performed with encapsulated I-125 isotopes (seeds) using transrectal ultrasound guidance and metal needles. The SPOT PRO 3.1 (Elekta, Sweden) system is used for treatment planning. In this study the first 79 patients were treated with loose seed (LS) technique, the consecutive patients were treated with stranded seed (SS) technique. During intraoperative planning the dose constraints were the same for both techniques. All LSs were placed inside the prostate capsule, while with SS a 2 mm margin around the prostate was allowed for seed positioning. The prescribed dose for the prostate was 145 Gy. This study investigated prostate dose coverage in 30-30 randomly selected patients with LS and SS. Four weeks after the implantation native CT and MRI were done and CT/MRI image fusion was performed. The target was contoured on MRI and the plan was prepared on CT data. To assess the treatment plan dose-volume histograms were used. For the target coverage V100, V90, D90, D100, for the dose inhomogeneity V150, V200, and the dose-homogeneity index (DHI), for dose conformality the conformal index (COIN) were calculated. Intraoperative and postimplant plans were compared. The mean V100 values decreased at four-week plan for SS (97% vs. 84%) and for LS (96% vs. 80%) technique, as well. Decrease was observed for all parameters except for the DHI value. The DHI increased for SS (0.38 vs. 0.41) and for LS (0.38 vs. 0.47) technique, as well. The COIN decreased for both techniques at four-week plan (SS: 0.63 vs. 0.57; LS: 0.67 vs. 0.50). All differences were significant except for the DHI value at SS technique. The percentage changes were not significant, except the COIN value. The dose coverage of the target decreased significantly at four-week plans for both techniques. The decrease was larger for LS technique, but the difference between techniques was not significant at this patient number. The dose distribution was more homogenous, but the conformality was worse at four-week plans.

The aim of the study was to compare different treatment plans - intensity-modulated and conformal - for head and neck cancer patients. Treatment plans were developed for ten head and neck cancer patients by applying four different techniques: two conventional 3D conformal plans (forward treatment planning, with two opposing fields 90o-270o and one asymmetric anterior field, matching in isocenter /Conv/, conformal parotis sparing plans /ConPas/), 3D conformal plans with inverse treatment planning techniques /INVCRT/ and intensity-modulated radiation therapy plans /IMRT/. The plans were made for the same target volumes PTV50 (elective) and PTV66 (boost-16 Gy). The cumulative dose was 66 Gy, and the Philips Pinnacle3 v8.0m TPS was used for treatment planning. The organs at risk (OAR) were as follows: spinal cord, brain stem, left and right parotis and oral cavity. The dose constrains and conditions for optimization were determined for IMRT techniques with 7 fields. During the optimization we applied two different protocols: in one case the plans were made by 40 segments for "step and shoot" IMRT techniques and by 14 segments for INVCRT, which were converted into static fields. The homogeneity (HI) and conformity (COIN) indices were calculated for planning target volumes and the comparisons were assessed on several dosimetric parameters for OARs. The IMRT, INVCRT, Conv and ConPas techniques for PTV50 planning target volume gave the following values for homogeneity index: 0.13, 0.18, 0.22, 0.19, and for conformity index: 0.76, 0.68, 0.13, 0.09. The spinal cord received a maximum of 38 Gy, 42 Gy, 45 Gy and 44 Gy for the PTV66. Mean doses of the oral cavity outside the target volume were 33 Gy, 36 Gy, 30 Gy and 48 Gy. When the 16 Gy boost treatment was applied on one side only, the mean dose for the parotis on the contralateral side was 28 Gy, 31 Gy, 49 Gy and 43 Gy, while 39 Gy, 41 Gy, 59 Gy and 53 Gy on the same side. The objectives of adequate target coverage and sparing of critical structures were fulfilled only with IMRT technique. Although the sparing of the oral cavity was the most effectively provided by the traditional technique - due to the arrangement of the fields - it gave the worst results regarding the parotis and the target volume. The highest dose for the oral cavity was given by the ConPas technique, which can cause serious early and late side effects. By increasing the number of segments for IMRT at a reasonable level, the dose for OARs can be reduced.

A novel method has been put forward for very large electron beam profile measurement. With this method, absorbed dose profiles can be measured at any depth in a solid phantom for total skin electron therapy. Electron beam dose profiles were collected with two different methods. Profile measurements were performed at 0.2 and 1.2 cm depths with a parallel plate and a thimble chamber, respectively. 108cm × 108 cm and 45 cm × 45 cm projected size electron beams were scanned by vertically moving phantom and detector at 300 cm source-to-surface distance with 90° and 270° gantry angles. The profiles collected this way were used as reference. Afterwards, the phantom was fixed on the central axis and the gantry was rotated with certain angular steps. After applying correction for the different source-to-detector distances and incidence of angle, the profiles measured in the two different setups were compared. Correction formalism has been developed. The agreement between the cross profiles taken at the depth of maximum dose with the 'classical' scanning and with the new moving gantry method was better than 0.5 % in the measuring range from zero to 71.9 cm. Inverse square and attenuation corrections had to be applied. The profiles measured with the parallel plate chamber agree better than 1%, except for the penumbra region, where the maximum difference is 1.5%. With the moving gantry method, very large electron field profiles can be measured at any depth in a solid phantom with high accuracy and reproducibility and with much less time per step. No special instrumentation is needed. The method can be used for commissioning of very large electron beams for computer-assisted treatment planning, for designing beam modifiers to improve dose uniformity, and for verification of computed dose profiles.

Background: The purpose of the study was to verify different values of quality parameters of portal images in radiotherapy., Materials and Methods: We investigated image qualities of different field verification systems. Four EPIDs (Siemens OptiVue500aSi(®), Siemens BeamView Plus(®), Elekta iView(®) and Varian PortalVision™) were investigated with the PTW EPID QC PHANTOM(®) and compared with two portal film systems (Kodak X-OMAT(®) cassette with Kodak X-OMAT V(®) film and Kodak EC-L Lightweight(®) cassette with Kodak Portal Localisation ReadyPack(®) film)., Results: A comparison of the f50 and f25 values of the modulation transfer functions (MTFs) belonging to each of the systems revealed that the amorphous silicon EPIDs provided a slightly better high contrast resolution than the Kodak Portal Localisation ReadyPack(®) film with the EC-L Lightweight(®) cassette. The Kodak X-OMAT V(®) film gave a poor low contrast resolution: from the existing 27 holes only 9 were detectable., Conclusions: On the base of physical characteristics, measured in this work, the authors suggest the use of amorphous-silicon EPIDs producing the best image quality. Parameters of the EPIDs with scanning liquid ionisation chamber (SLIC) were very stable. The disadvantage of older versions of EPIDs like SLIC and VEPID is a poor DICOM implementation, and the modulation transfer function (MTF) values (f50 and f25) are less than that of aSi detectors.

The aim of this publication is to review the requirements necessary for using computed tomography (CT) for radiotherapy treatment planning. The equipments were tested with different CT phantoms. The authors made several measurements for checking the CT number, the quality and the mechanical parameters of CT tables. The CT numbers measured on the equipments of different manufacturers were in quite good agreement with the IAEA requirements. The geometric distortions of CT images are negligible, while the mechanical parameters of CT tables show considerable variety. A quality assurance - quality control protocol is recommended to implement in a safe workflow.

Purpose: To review the experiences regarding the therapeutic response and side effects of concomitant radiochemotherapy of cervical cancer carried out with different cisplatin doses., Patients and Methods: At the Municipal Center for Oncoradiology, Budapest, Hungary, 92 patients with cervical cancer were treated with concomitant radiochemotherapy in the period between July 2002 and March 2007. The total dose of high-energy external radiation (megavoltage) treatment was 50.4 Gy with a fraction dose of 1.8 Gy on the small pelvis. Before irradiation, cisplatin 40 mg/m(2), 30 mg/m(2), or 20 mg/m(2) was administered once a week., Results: In 17 cases, the cisplatin dose was 30 mg/m(2); during radiochemotherapy the number of cisplatin treatments was equal to or more than four in 14 patients (82%). After administering 40 mg/m(2) cisplatin to 64 patients, chemotherapy in four or more treatments could only be applied in 37 cases (58%). Eleven patients received cisplatin at the dose of 20 mg/m(2); in ten (91%) of them, the number of treatments was four or more. By comparing the side effects, it can be stated that hematologic side effects (mostly leukopenia) grade 3 occurred in 12% of the patients receiving cisplatin 30 mg/m(2), and grade G3-4 in 16% of the 40-mg/m(2) cisplatin group. For cisplatin 30 mg/m(2), 82% of hematologic side effects were in the G1 range. There was no significant difference between the 20- and 30-mg/m(2) regimens. As for the gastrointestinal toxicity, similar side effects grade 1 were detected, which occurred in 58% and 38% of the patients receiving 30 mg/m(2) and 40 mg/m(2), respectively., Conclusion: On the basis of a detailed analysis, the correlation between the number of treatments, the therapeutic and the side effects could be verified. In the course of dose reduction, there was no significant difference when comparing the results of therapy, however, the quality of life was better if cisplatin 30 mg/m(2) was administered instead of 40 mg/m(2). If cisplatin 20 mg/m(2) was given, the results were significantly worse. On the basis of the own results, it can be stated that the optimal weekly dose of cisplatin is 30 mg/m(2).

Purpose: Quality assurance (QA) and quality control (QC) of different electronic portal imaging devices (EPID) and portal images with the PTW EPID QC PHANTOM., Material and Methods: Characteristic properties of images of different file formats were measured on Siemens OptiVue500aSi, Siemens BeamView Plus, Elekta iView, and Varian PortalVision and analyzed with the epidSoft 2.0 program in four radiation therapy centers. The portal images were taken with Kodak X-OMAT V and the Kodak Portal Localisation ReadyPack films and evaluated with the same program., Results: The optimal exposition both for EPIDs and portal films of different kind was determined. For double exposition, the 2+1 MU values can be recommended in the case of Siemens OptiVue500aSi Elekta iView and Kodak Portal Localisation ReadyPack films, while for Siemens BeamView Plus, Varian PortalVision and Kodak X-OMAT V film 7+7 MU is recommended., Conclusion: The PTW EPID QC PHANTOM can be used not only for amorphous silicon EPIDs but also for images taken with a video-based system or by using an ionization chamber matrix or for portal film. For analysis of QC tests, a standardized format (used at the acceptance test) should be applied, as the results are dependent on the file format used.

Background: Many departments have analog simulators and irradiation facilities (especially cobalt units) without electronic portal imaging. Import of the images into the R&V (Record & Verify) system is required., Material and Methods: Simulator images are grabbed while portal films scanned by using a laser scanner and both converted into DICOM RT (Digital Imaging and Communications in Medicine Radiotherapy) images., Results: Image intensifier output of a simulator and portal films are converted to DICOM RT images and used in clinical practice. The simulator software was developed in cooperation at the authors' hospital., Conclusion: The digitalization of analog simulators is a valuable updating in clinical use replacing screen-film technique. Film scanning and digitalization permit the electronic archiving of films. Conversion into DICOM RT images is a precondition of importing to the R&V system.

Aim: To work out a craniospinal target volume definition and radiotherapy which can be used in clinical practice., Method: This technique has been applied in the Municipal Center of Oncoradiology since 2004 for total cerebral and spinal (neuroaxis) radiation. The individual radiation treatment plans were carried out using the CadPlan (Varian) 3D planning system with linear accelerator, in 3D on the basis of CT. The CT slices were prepared at 1 cm distance. The target volume and the organs at risk (OAR) were marked in slices. To delineate the field asymmetrical blending and multileaf collimator (MLC) were applied. Depending on the shape and size of the target, two or more field matching were made with the new technique., Results: The dose distribution in the target volume and the OAR were controlled in the coronary, sagittal and horizontal views and with dose volume histograms (DVH)., Conclusions: The condition for applying this technique is the accurate adjustment of digital simulator picture, field-control picture and DRR (digital reconstructed radiogram).