Search

Objectives: To synthesize eye-tracking-based evidence on consumers' visual attention devoted to alcohol warning labels (AWLs) on alcohol packaging., Study Design: A systematic review was conducted and reported in accordance with the PRISMA guidelines., Methods: Two rounds of a literature search were conducted to identify relevant peer-reviewed articles and unpublished grey literature. While the first round (July 3 to August 21, 2023) was based on three electronic databases (PubMed, Web of Science, and PsycINFO), the second round (May 20 to 28, 2024) followed a multiple-step protocol that systematically searched the grey literature. Five criteria were applied to screen eligible articles. Using established quality control tools, the identified articles were assessed for overall quality and then for quality specific to the eye-tracking method., Results: Six published peer-reviewed articles were thus included in the current review along with one unpublished research paper from a doctoral thesis. This review paper summarizes earlier findings in terms of bottom-up (i.e., AWL design-related) factors such as size, color, surrounding border, and pictorial elements, and top-down (i.e., goal-driven) factors such as motivation to change drinking behavior and self-affirmation. The review found that people tend to pay very little attention to AWLs displayed on alcohol packaging, although there is mixed evidence as to the effectiveness of specific factors., Conclusions: Further investigations using eye-tracking are needed to collect additional evidence on attention devoted to AWLs. Meanwhile, we put forward implications for policymakers and future avenues for research based on our review of the existing literature., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Cellulose micro/nanofibril (MNFC) films are an interesting alternative to plastic-based films for application in biodegradable packaging. In this study, we aimed to produce and characterize MNFC films obtained from alkaline-pretreated rubberwood (Hevea brasiliensis) waste and Eucalyptus sp. commercial pulp. MNFC and films were evaluated regarding microstructure; crystallinity; stability; and physical, optical, mechanical, and barrier properties. A combined quality index (QI) was also calculated. Eucalyptus MNFC suspensions were more stable than H. brasiliensis. Both films had a hydrophobic surface (>90°) and high grease resistance (oil kit 12). H. brasiliensis films had lower transparency (26.4 %) and high crystallinity (∼89 %), while Eucalyptus films had lower permeability and higher mechanical strength. The QI of MNFC was 51 ± 5 for H. brasiliensis and 55 ± 4 for Eucalyptus, showing that both types of raw material have potential for application in the packaging industry and in the reinforcement of composites, as well as for high value-added applications in products made from special materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Significance: Cigars are sometimes marketed with cannabis references because they are often used for smoking blunts (i.e., cannabis rolled in cigar paper with or without tobacco). However, little research exists on the impact of cannabis co-marketing on cigar perceptions., Methods: Participants included 506 US youth (ages 15-20) recruited April-June 2023 through Qualtrics who reported ever using little cigars or cigarillos (LCCs), past 30-day use of LCCs, or susceptibility to using LCCs. We then conducted a between-subjects experiment, randomizing youth to view one of two cigarillo packages: 1) a package with cannabis co-marketing (i.e., the package included a cannabis-related flavor descriptor and the word "blunt" appeared in the brand name and product label) or 2) a package with no cannabis co-marketing. We assessed the effects of the packaging on perceptions of product ingredients, addictiveness and harm perceptions, product appeal, susceptibility to using the product shown, and purchase intentions., Results: Packages with cannabis co-marketing were perceived as more likely to contain cannabis (OR: 5.56, 95 % CI: 3.73, 8.27) and less likely to contain tobacco (OR: 0.42, 95 % CI: 0.25, 0.70) or nicotine (OR: 0.57, 95 % CI: 0.40, 0.82). Cannabis co-marketing also led to higher susceptibility to using the product shown (B: 0.21, p = 0.02). We did not find evidence that cannabis co-marketing changed harm perceptions or purchase intentions., Conclusions: Among a sample of US youth, cannabis co-marketing on cigar packages may change perceptions of product ingredients and increase susceptibility to using such products, which could lead to the initiation of cigars and cannabis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Introduction: The direct morbidity and mortality caused by tobacco are well documented, but such products also contribute to a range of environmental pollutants resulting from tobacco product waste. No previous studies have yet quantified tobacco product waste in a low-income and middle-income country (LMIC). This study estimates the potential annual waste generated due to consumption of smoked and smokeless tobacco products in India and its states., Methodology: We systematically collected samples of smoked and smokeless tobacco products from 33 districts of 17 Indian states/union territories. Stratified weights of plastic, paper, foil and filter packaging components, and gross empty package weights were recorded. Prevalence of smoking and smokeless tobacco use at national and state-level estimates was derived from the Global Adult Tobacco Survey (2016-2017) to quantify waste potentially generated by tobacco products., Results: We included 222 brands of tobacco products (70 cigarette, 94 bidi and 58 smokeless tobacco brands) in the final analysis. A total of 170 331 (±29 332) tonnes of waste was estimated to be generated annually, out of which 43.2% was plastic, 3.6% was foil and 0.8% was filter. Two-thirds of the overall waste was contributed by smokeless products alone. Maximum waste was generated in Uttar Pradesh (20.9%; 35 723.7±6151.6 tonnes), Maharashtra (8.9%; 15 116.84±2603.12 tonnes) and West Bengal (8.6%; 14 636.32±2520.37 tonnes)., Conclusion: This study provides first of its kind national-level evidence on the types (plastic, paper, foil and filter) and quantity of waste potentially generated by use of tobacco products in India. Similar studies from other LMICs can serve to raise consciousness about many negative environmental impacts of tobacco products and need for policies to address them., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. No commercial re-use. See rights and permissions. Published by BMJ.)

Comprehensive volatile organic compounds (VOCs) emission control is imperative to decreasing occupational health risks and environmental impact of the packaging and printing industries. In this work, we investigated the VOCs emission characteristics and concentrations of individual contaminants generated by the packaging and printing industries, with regard to various categories, processes, and geographic regions. VOCs emissions, ozone formation potential (OFP), and associated health risks were assessed at 10 representative packaging and printing firms across several cities in Shandong Province, China. Plastic packaging enterprises had the greatest levels of unorganized VOCs emissions, consisting predominantly of oxygenated volatile organic compounds (OVOCs), followed by alkanes and halocarbons. From metal and paper packaging enterprises, OVOCs, alkanes, and aromatics were significant components of unorganized VOCs emissions. Aromatics, halocarbons, and OVOCs contributed significantly to OFP in workshops. The potential carcinogenic risk associated with VOCs in the packaging and printing industries was not significant. However, according to the findings in this study, the workshop environment may provide a comparatively elevated non-carcinogenic risk attributable to ethyl acetate, isopropanol, acrolein, 1,1,2-Trichloroethane, 1,2-Dichloropropane, and naphthalene exposure. In particular, the endocrine-disrupting and genetic toxic effects caused by benzene, toluene, styrene, and naphthalene should not be overlooked. Thus, it is essential to provide precedence to the working environment conditions of workshop laborers, while also undertaking scientific and systematic measures to mitigate the detrimental impacts of VOCs on the environment and human welfare., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Objective: This study aimed to contribute to local research evidence to promote the implementation of plain packaging of tobacco products in the Philippines. The study aimed to assess Filipinos' perception of the effectiveness of plain packaging and their readiness by assessing the potential impact of plain packaging., Methods: We conducted a nationwide geographically representative online panel survey with a sample size of 2,000 Filipinos. The survey recruited respondents 18-65 years old and residing in the Philippines, with 500 respondents each from the National Capital Region, Luzon, Visayas, and Mindanao. We showed respondents six different mock-ups of cigarette packs in plain packaging, with two sizes of graphic health warnings (50 and 75%) and three plain packaging colors (black, white, and Pantone 448C). Using five-point Likert scales, participants rated their agreement with 18 items assessing readiness and rationales for plain packaging and 54 items related to pack design (9 items for 6 pack designs)., Results: The study showed that Filipinos recognize the value of adopting plain packaging with larger graphic health warning labels on tobacco products in the Philippines. Both non-smokers and smokers agreed that plain packaging has the potential to reduce the attractiveness and appeal of packs, prevent advertisement and promotion of tobacco products, reduce the ability of tobacco products to mislead consumers, increase the noticeability and effectiveness of the pictorial health warnings, increase recall of the pictorial health warnings, affect consumer perceptions of the attractiveness of the tobacco products and their relative safety, reduce youth experimentation with the use of tobacco products, prevent the use of tobacco brand variants as a promotional tool, prevent branding targeted toward youth, promote quitting among current users, and to more clearly inform consumers about the harmful effects of tobacco use., Conclusion: We recommend that policymakers pursue plain packaging as legislation or as part of a reform of the Philippines' graphic health warnings law. The law should target tobacco products sold in the Philippines., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Arda, Amul, Mallari, and Santiago.)

The compositions of Dutch lightweight packaging waste (LWP) and sorted products named "PET (Polyethylene terephthalate) trays" have been determined on object level. Additionally, the PET trays from both waste types were sorted in 16 categories representing their packaging use and material build-up. The material composition of at least 10 representative trays from each category was determined with chemical and thermal analysis, based on which the average material composition per category was established. Based on this data the average material composition of sorted PET tray products was approximated. The recyclability of the various categories of PET trays was assessed based on their material build-up. The most ubiquitous PET trays in Dutch LWP and sorted products were only found to be suitable to produce opaque recycled PET with mechanical recycling processes. Whereas only some more uncommon PET trays can be used to produce transparent recycled PET with mechanical recycling processes. Depolymerisation is deemed to be a more appropriate recycling process that will allow the production of transparent food-grade recycled PET., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Eggo U. Thoden van Velzen reports financial support was provided by Institute for Sustainable Process Technology. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Multilayer film packaging (MLP) waste was decomposed completely at 500 °C. Catalysts were employed to convert residue polymer to waxes via pyrolysis at 500 °C. The activities achieved from using mordenite (Si/Al = 10), H-ZSM-5 (Si/Al = 25), MCM-41, and Al-MCM-41 (Si/Al ratio of 25, 50, and 75) catalysts were studied. The yield and property of the wax were improved with the use of the catalysis with various acidity and porous structure. The low yield of the waxes, when using mordenite and H-ZSM-5 catalysts, was caused by the microporous structure and strong acidic properties of the catalysts resulting in larger amount of gas production. The MCM-41 catalyst modified with various aluminum content raised the wax yield to 60 %. Al-MCM-41(50) produced the largest amount of wax when compared to Al-MCM-41(25), Al-MCM-41(75), and MCM-41. The mild acidity and mesoporous structure of Al-MCM-41(50) significantly enhanced the paraffins structure of the obtained waxes over other structures, while lower Si/Al ratios favored the conversion of paraffins toward olefin structure. The pyrolysis of MLP with Al-MCM-41(50) produced paraffins and olefins with the middle carbon ranging (C11-20) which were similar quality to pharmaceutical grade of petroleum wax. The spent catalysts of Al-MCM-41 series gradually decreased in wax yield and paraffins composition during the sequential MLP pyrolysis; however, the activity of catalysts was recovered after calcination of the spent catalysts. Furthermore, the viscosity of waxes obtained from Al-MCM-41(50) was 2384 Pa.s at 25 °C similar to the viscosity from commercial petroleum jelly base of 2333 Pa.s., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Oral cancer is the most common malignancy in many developing countries, such as India, due to increased consumption of smokeless tobacco. The trace elemental components in commercially packaged forms of tobacco can play a significant role in the pathogenesis of oral cancer. To qualitatively assess the trace elements in various types of commercially packaged forms of tobacco using laser-induced breakdown spectroscopy (LIBS). Two popular varieties of 'Paan masala' that contained a mixture of slaked lime with areca nut, catechu, and other flavouring agents (tobacco was absent) and four types of packaged tobacco were obtained from 'Paan' shops. The contents in the packets were made into pellets using a hydraulic press and subjected to elemental analysis using LIBS. A ten-trial experiment was carried out on all six pellets. The National Institute of Standards and Technology (NIST) database was used to assess the emission lines. The elements obtained from commercially packaged tobacco and Paan masala were similar: calcium (Ca), iron (Fe), aluminium (Al), nickel (Ni), and chromium (Cr). Substances that cause DNA damage and carcinogenesis are inorganic elements such as nickel. Our study revealed that carcinogens such as nickel are present in the commercially packaged forms of tobacco and 'Paan masala' samples., (© 2024. The Author(s).)

This study evaluates the anaerobic mesophilic mono- and co-digestion of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) plastic bottles as a proxy for rigid packaging materials. Initial tests showed a 97.3 ± 0.2 % reduction in weight and an observable alteration in the surface (thinning, color fading and pitting) of the PHBH bottles after eight weeks. Subsequent tests showed that PHBH squares (3 × 3 cm) produced 400 NmL-CH 4 /g-VS fed , at a slower rate compared to powdered PHBH but with similar methane yield. Co-digestion experiments with food waste, swine manure, or sewage sludge showed successful digestion of PHBH alongside organic waste (even at a high bioplastic loading of 20 % volatile solids basis), with methane production comparable to or slightly higher than that observed in mono-digestion. Molecular analyses suggested that the type of co-substrate influenced microbial activity and that methane production was mainly driven by hydrogenotrophic methanogenesis. These results suggest the potential for integrating rigid PHBH packaging into anaerobic digesters., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: R.A.B. and T.B. report a relationship with Société des Produits Nestlé S.A. that includes: employment. The authors declare the following financial interests relationships which may be considered as potential competing interests: O.G.-D., L.J.M.-M., and R.M. reports financial support was provided by Société des Produits Nestlé S.A., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Sensor-based material flow monitoring allows for continuously high output qualities, through quality management and process control. The implementation in the waste management sector, however, is inhibited by the heterogeneity of waste and throughput fluctuations. In this study, challenges and possibilities of using different types of sensors in a lightweight packaging waste sorting plant are investigated. Three external sensors have been mounted on different positions in an Austrian sorting plant: one Light Detection and Ranging (LiDAR) sensor for monitoring the volume flow and two near-infrared (NIR) sensors for measuring the pixel-based material composition and occupation density. Additionally, the data of an existing sensor-based sorter (SBS) were evaluated. To predict the newly introduced parameter material-specific occupation density (MSOD) of multi-coloured polyethylene terephthalate (PET) preconcentrate, different machine learning models were evaluated. The results indicate that using SBS data for both monitoring of throughput fluctuations caused by different bag opener settings as well as monitoring the material composition is feasible, if the pre-set teach-in is suitable. The ridge regression model based on SBS was comparable (RMSE = 3.59 px%, R ² = 0.57) to the one based on NIR and LiDAR (RMSE = 3.1 px%, R ² = 0.68). The demonstrated feasibility of the implementation at plant scale highlights the opportunities of sensor-based material flow monitoring for the waste management sector and paves the way towards a more circular plastics economy., Competing Interests: Declaration of conflicting interestsThe authors declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Background: Sampling refers to the free supply of small product samples. In this process, the packaging can be disproportionate to the contents leading to raw material consumption and, in the case of poor recyclability, environmental pollution., Objective: In this article, calculations regarding the ratio between packaging and product weight for commonly used types of packaging (sachet, tube, jar) of dermatological product samples are presented. The usefulness of sampling is discussed considering environmental and economic criteria., Material and Methods: A total of 43 dermatological product samples from different manufacturers were manually weighed and classified. Packaging was disassembled into its structural components. The proportional weights or the weight of the bottle/tube body were calculated with database values for the respective material in terms of greenhouse gas equivalents (CO2eq) and freshwater consumption. Subsequently, a total sum for the impact of each packaging was formed. Only the material and manufacturing process were considered because there were no valid data available for transport, utilization, and end of life (EoL) impacts., Results: The smallest and lightest product sample (1.24 g) generated ca. 15 g CO2eq and approximately 700 ml of freshwater consumption. The largest and heaviest product sample (37 g) generated 53 g CO2eq and 5.78 l of freshwater consumption. Assuming an annual distribution of 10 million units of the 43 product samples examined here, ca. 8000 t of CO2eq are produced by the packaging alone. Additionally, 880,000,000 l of water are used and approximately 2300 t of packaging waste are generated., Discussion: Sampling shows an unfavorable ratio between CO2eq/water consumption and utility, especially in comparison to larger units of packaging. Millions of product samples are distributed annually in doctor's practices, hospitals and pharmacies, particularly in dermatology. The practice of sampling should be questioned both ecologically and economically., (© 2024. The Author(s).)

The recycling of paper and board (PB) yields economic and environmental advantages compared to primary paper production. However, PB from lightweight packaging (LWP) waste is currently not comprehensively reintegrated into the paper value stream. To develop an adapted recycling process for PB from LWP, PB quantities, qualities, and fluctuations ranges in LWP are required. Currently, no sufficient database is available. Therefore, we developed a methodical approach and conducted a case study to access the PB potential in LWP sorting plants using manual analysis and sensor-based material flow monitoring. Differences resulting from seasonal variations, materials from different settlement structures, and fluctuation ranges in LWP composition over two weeks have been investigated. PB contents in the input of 6.5 wt% (ww) and 5.9 wt% (ww) were determined for winter and summer sampling campaigns, respectively. The PB product stream amounted to 5.7 wt% (ww, winter) and 4.8 wt% (ww, summer). Around 45 wt% (ww) of PB from the PB product stream was classified as misplaced by the consumer and should have been discarded in separate paper collections. Based on the determined PB quantities and qualities, a potential of usable and in the PB product stream available PB in LWP was determined. The technically available and usable PB potential in German LWP waste amounts to 89,000 to 100,000tons per year (average PB yield of around 65 wt% (ww)). The methodical approach can be adapted for sorting plant balances. The results can contribute to developing an adapted recycling process for PB from LWP., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Objective: European Commission Regulation (EU) n°2023/1545 introduced the concept of grouping names in the cosmetics sector in July 2023. These groups bring together allergenic substances with the same level of skin sensitization. Their purpose is to lighten the list of ingredients on cosmetic packaging, by grouping together substances deemed to be similar under the same name. As this classification is based on a single toxic effect - skin sensitization - the present study aims to analyse the relevance of these groupings with regard to other toxic effects of substances in the same group., Methods: This study was carried out by consulting an available database, various reports from 5 committees, 2 books and 5 articles in order to complete the toxicological profile of each substance. Then, in order to highlight any discrepancies within the classification, the worst cases were identified. For this purpose, the data for each substance in a group were compared, and in the event of greater criticality for a toxic effect, this was qualified as a worst case. In addition, similar toxic effects between several substances within the same group were also recorded. The aim of this additional research was to validate the definition of the grouping name and the similarities between substances in the same group., Results: From the 17 grouping names, 5 presented worst cases. Two groups had 2 worst cases and the others only one. In total, from the 7 worst cases detected, 3 were due to the toxic effect "skin irritation". In most cases, the substances in the groupings shared the presence or absence of risk. Only the degree of risk criticality varied., Conclusion: Classification by grouping names appears justified regarding the similarities between substances, particularly in terms of skin sensitization. However, the presence of worst cases qualifies it and highlights the importance of being vigilant when assessing the risk of cosmetic products including these grouping names in their list of ingredients., (© 2024 Society of Cosmetic Scientists and Societe Francaise de Cosmetologie.)

Introduction: Youth use of electronic cigarettes (e-cigarettes) is rising globally and is associated with health harms. Flavor descriptions on e-liquid packaging may contribute to the appeal of e-cigarettes among youth. This study compared subjective ratings of e-liquid packaging flavor descriptions among nonsmoking and non-vaping UK adolescents., Aims and Methods: This was an online observational study in a UK sample of nonsmoking and non-vaping adolescents aged 11-17 years. The primary analyses compared flavored versus unflavored descriptions and the secondary analyses compared sweet flavor versus fruit flavor descriptions. Outcomes were packaging appraisal, packaging receptivity, perceived harm, and perceived audience., Results: The survey was completed by 120 participants (74% female). Packaging appraisal ratings were higher for e-liquids with flavored descriptions than unflavored descriptions (mean difference 5.9, 95% CI: 4.2 to 7.6, p < .001). Similarly, packaging receptivity ratings were higher for e-liquids with flavored descriptions than unflavored descriptions (mean difference 4.2, 95% CI: 2.8 to 5.6, p < .001). Participants also perceived e-liquids with flavored (vs. unflavored) descriptions as less "grown-up" (mean difference -5.2, 95% CI: -7.3 to -3.1, p < .001). However, ratings of perceived harm were similar for flavored and unflavored descriptions (mean difference -1.0, 95% CI: -2.6 to .5, p = .189)., Conclusions: Although this study found differences in subjective ratings of e-liquids with flavored and unflavored descriptions, nonsmoking and non-vaping UK adolescents generally had low appraisal and receptivity for e-liquids and they perceived them as being "grown-up" and harmful., Implications: Youth use of electronic cigarettes (e-cigarettes) is increasing globally, leading to concerns about health harms. This study compared adolescents' ratings of e-liquids with flavored versus unflavored descriptions and e-liquids with sweet flavor versus fruit flavor descriptions. This study adds to previous studies that have compared adolescents' ratings of e-liquids with tobacco flavor versus non-tobacco flavor descriptions. Although packaging appraisal and receptivity ratings were higher (more positive) for e-liquids with flavored versus unflavored descriptions, overall, adolescents who do not smoke or vape had low appraisal and receptivity for e-liquids, and they perceived them as being "grown-up" and harmful., (© The Author(s) 2024. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.)

The low recycling rate of post-consumer plastic packaging waste (PPW), which is partly due to insufficient separate collection, heterogeneous composition and high levels of contamination, poses a challenge in Austria, where the recycling rate must double in order to meet the target of 55 %. This study analyzes key packaging characteristics of non-beverage plastic bottles influencing recyclability, using Vienna as a case study. Additionally, a net quantity indicator and separate collection rates were calculated. 738 bottles from mixed MSW and 1,159 bottles from separate PPW collection were analyzed. The main polymer's proportion described by the net quantity indicator was higher for bottles from separate collection (69-72 %) than from mixed MSW (58 %), showing that a large share of the foreign materials are residues and dirt, with significantly higher contents in mixed MSW (20 %) than in separate collection (11 %). With a separate collection rate of 19.2 %, the great potential for recycling currently lies in mixed MSW at 4,112 t/yr. Thereof, 46 % is uncolored, 54 % is colored/white and, in terms of material grade, 30 % is food grade. The most common filling volume for PET, PP and HDPE was 0.5 < x ≤ 1.5 L (23-59 %) and the most common decoration technology was label (60-85 %). PET and PP had the highest shares of food-grade bottles (37-46 %), while PP had the highest share of colored bottles (22-31 %). The mechanical recycling potential of bottles depends largely on packaging characteristics, influencing separate collection and also automatic sorting. Harmonized design specifications are therefore crucial for this heterogeneous PPW fraction., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Introduction: The global market for capsule cigarettes has grown rapidly, especially in Latin America. This research examined the sales trends and patterns as well as packaging characteristics of capsule cigarette in Mexico in recent years., Methods: National data on cigarette sales in Mexico between October 2018 and September 2021 licensed from NielsenIQ were supplemented with cigarette pack pictures and Internet searches to determine whether characterizing flavor, concept flavor, and action descriptors were used. Market share in sales value and volume was calculated by capsule and flavor status, descriptors, price tier, manufacturer, pack size, and cigarette length for the whole time period and for each month. Number of unique brand variants was also examined., Results: Capsule cigarette sales totaled US$4.29 billion or 30.99 billion sticks during the assessed period, comprising 37.7% of the cigarette market share in sales value or 35.5% in sales volume. Over half of capsule cigarettes sold during this time period had concept flavor descriptors, 17.8% contained characterizing flavor descriptors, and 15.1% contained action descriptors that were suggestive of the interactive aspects of capsules. The monthly market share of capsule cigarette sales volume among all cigarette sales in Mexico increased steadily from 33.3% in October 2018 to 37.3% in September 2021., Conclusions: The expanding capsule cigarette market in Mexico is concerning, given the product's associated misconceptions of reduced harm and greater appeal among youth. Findings underline the need for enhanced regulations to address the public health threat posed by capsule cigarettes., Implications: Capsule cigarettes have a substantial market share in Mexico, with increasing popularity. Descriptors and other product characteristics such as cigarette length might be used to increase the appeal and target particular populations. Policy makers should consider banning capsules and flavors in cigarettes including descriptors or other indication in product presentation that could be perceived as denoting a taste, aroma, or sensation, and making the appearance and design of tobacco products more commensurate with the harm they cause by adopting plain and standardized packaging., (© The Author(s) 2023. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.)

Introduction: Healthcare contributes more than 1% of all domestic waste in the United Kingdom (UK), with operating theatre waste alone accounting for approximately 50% of all hospital waste. In November 2022, the UK Surgical Royal Colleges issued an Intercollegiate Climate Emergency Declaration and called for urgent action. We review waste production and the recyclability of surgical instrument packaging used in a common ear, nose and throat procedure (thyroidectomy) and suggest strategies to make this surgery more sustainable,. These strategies can be generalised to other surgeries., Methods: We prospectively audited packaging waste from 20 thyroidectomies performed at the Royal Marsden Hospital in the UK between July and December 2022. All packaging was weighed, categorised and analysed after the operation., Results: On average, each thyroidectomy produced packaging waste comprising 183g (34%) of plain paper/cardboard, 167g (31%) of soft plastic film, 142g (26%) of laminated paper, 37g (7%) of hard plastic and 11g (2%) of metal foil. Of all the packaging collected, only one item had a recycling label. When extrapolated to the 7,851 thyroidectomies performed in the National Health Service during the fiscal year 2021/2022, the estimated total weight of packaging waste would be 4.2 tonnes, of which only 31.4kg would be indicated as recyclable. When converted to an estimated carbon footprint, total carbon emissions would be 1,048kg CO 2 e, equivalent to three round trips from London to Edinburgh in a petrol car., Conclusion: This audit demonstrates the different categories and vast amount of packaging waste from a common operation. Manufacturers should place clear recyclability labels on packaging, and switch to recyclable materials and a digital information booklet where possible. Local waste audit and analysis can be simple first steps towards making surgery more sustainable.

Background and Aims: A health warning label (HWL) cautioning about the link between alcohol and cancer may be able to communicate alcohol risks to consumers and potentially counter health-oriented nutrition advertising on ready-to-drink alcoholic beverages. This study aimed to examine the independent and combined effects of nutrient content claims (e.g. 0 g sugar) and a HWL on perceived product characteristics and intentions to consume, and whether these effects differed by gender and age., Design: A between-subjects randomized experiment. Participants were randomized to view one of six experimental label conditions: nutrient content claims plus nutrition declaration (NCC + ND), ND only, NCC + ND + HWL, ND + HWL, HWL only and no NCC, ND or HWL, all on a ready-to-drink (RTD) vodka-based soda container., Setting and Participants: Alcohol consumers (n = 5063; 52% women) in Canada aged 18-64 recruited through a national online panel., Measurements: Participants completed ratings of perceived product characteristics, perceived product health risks, and intentions to try, buy, binge and drink the product., Findings: Compared with the reference condition NCC + ND (current policy scenario in Canada), the other five experimental label conditions were associated with lower ratings for perceiving the product as healthy. All experimental conditions with a HWL were associated with lower product appeal, higher risk perceptions and reduced intentions to try, buy and binge. The experimental condition with a HWL only was associated with intentions to consume fewer cans in the next 7 days (β = -0.72, 95% confidence interval [CI] = -1.37,-0.08) versus the reference. Few interactions were observed, suggesting that label effects on outcomes were similar by gender and age., Conclusions: Health warning labels on alcohol packaging appear to be associated with lower product appeal, higher perceived health risks and reduced consumption intentions, even in the presence of nutrient content claims., (© 2024 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.)

Backgrounds: Cannabis edibles recently gained considerable market share in the United States. The tobacco and food literatures consistently suggest that product packaging regulations are crucial to substance control, but little is known about how product packaging may impact cannabis edible use. This study aims to estimate the impacts of packaging on individual preferences for cannabis edibles and explore heterogeneities in preferences by cannabis use status and use purposes., Methods: 1578 adults were recruited, who lived in 18 states and Washington D.C. in the United States that legalized recreational cannabis by the time of data collection in August and September of 2022. An online discrete choice experiment was conducted to elicit individual choices between cannabis edibles with variations in five packaging attributes: package style, health claim, potency indicator, warning label position, and warning label text. Mixed logit regressions were used to assess associations between package attributes and package choices. Subsample analysis was conducted by cannabis use status (users vs. nonusers) and use purposes (medical-only, recreational-only, and dual-purpose) to detect heterogeneities., Results: Almost all subsamples prefer branded packages to plain packages, any health claim to no health claim, and any potency indicator to no potency indicator. Cannabis users, particularly recreational-only users and dual-purpose users, also prefer youth-appealing packages to branded packages. Warning label position and text have limited impacts on choices. Overall, package style is perceived to be the most important attribute among the five (relative importance 33.2-50.8%), followed by health claim (relative importance 22.6-30.5%)., Conclusion: In the United States, adults' preferences for cannabis edibles are associated with packaging features. Policies requiring plain package and prohibiting youth-appealing package and unsubstantiated health claims may be effective methods of cannabis control., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Climacteric bananas are susceptible to endogenous ethylene and temperature, resulting in dehydration, accelerated senescence and deterioration. The widely-used plastic cling films is particularly complicated due to their high consumption and non-degradability. Herein, this study proposed to fabricate a carboxymethyl cellulose/polyvinyl alcohol/pyrazoic acid (CPP) hydrogel for postharvest banana preservation. The hydrogel demonstrated excellent potential as a packaging film, including natural degradability (complete degradation within 50 days), high tensile performance, transparent visibility and biosafety. As a validation experiment, bananas in a 30 °C environment confirmed the effectiveness of CPP hydrogels in banana postharvest preservation. Compared with the blank control and CP hydrogel, CPP packaging film delayed the processes of browning, dehydration, softening, nutrients loss, ripening and senescence in bananas, thereby maintaining their commercial value. Accordingly, this study demonstrates the potential of hydrogel materials as an alternative strategy to climacteric fruit preservation and plastic film., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Austria must recycle more packaging materials. Especially for plastic packaging waste, significant increases are necessary to reach the EU recycling targets for 2025 and 2030. In addition to improving separate collection and introducing a deposit system for specific fractions, the share of plastic packaging in mixed municipal solid waste (MSW) could be utilized. In Austria, about 1.8milliontonnes of mixed MSW are generated. This includes about 110,000 t/a of plastic packaging waste. Most of the mixed MSW (94 %) is sent directly or via residues from pre-treatment, such as mechanical-biological treatment or waste sorting, to waste incineration. While materials such as glass and metals can also be recovered from the bottom ash, combustible materials such as plastics must be recovered before incineration. This work aims to evaluate the recovery potential of plastic packaging waste in mixed MSW with automated waste sorting. For this purpose, two of the largest Austrian waste sorting plants, with a total annual throughput of about 280,000 t/a, were investigated. The investigation included regular sampling of selected output streams and sorting analysis. The results show that the theoretical recovery potential of plastic packaging from these two plants is 6,500 t/a on average. An extrapolation to Austria results in a potential of about 83,000 t/a. If losses due to further treatment, such as sorting and recycling, are considered, about 30,000 t/a of recyclate could be returned to plastic production. This would correspond to an increase in plastic packaging recycling rate from 25 % to 35 %., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: Although many studies on exposure to environmental tobacco smoke from passive smoking have been conducted, most of such studies have only focused on the chemicals produced by active combustion. The current study examined the extent to which uncombusted and packaged cigarettes in cigarette racks at retail stores diffuse airborne nicotine., Methods: Airborne nicotine samples were collected for 15 days on passive monitors mounted near the indoor cigarette racks (Point 1) and farthest point from the cigarette racks (Point 2) in tobacco retailer stores (N=95) in South Korea (5 months, data collection from January to May in 2022., Results: The average airborne nicotine level was 0.0908 ug/m 3 at Point 1 and 0.0345 ug/m 3 at Point 2. We found a positive correlation (r=0.647, p <0.001) in nicotine concentration between the two measurement points. The interior size of the target stores was positively correlated (r=0.334, p <0.001) with the within-store difference in nicotine concentration between the two measurement points. The airborne nicotine concentration at Point 1 was statistically significantly higher than at Point 2 (z=-2.326, p=0.020, effect size: 0.2215), especially at larger stores., Conclusions: Our findings indicate that packaged, unopened, and uncombusted cigarettes in cigarette racks at tobacco retailers emits airborne nicotine, which is a previously unrecognized source of nicotine exposure. This result has implications for policy considerations, such as the potential installation of ventilation systems on cigarette racks or the exploration of alternative packaging methods., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The incorporation of representative commercial compostable materials into a full-scale open-air windrow composting process in an industrial site using household-separated biowaste was investigated. Two batches out of the same initial biowaste mixture were studied, one as control and the other containing initially 1.28 wt% of certified compostable plastics. No significant differences in the composting process were revealed. Compostable plastics exhibited a 98 wt% mass loss after 4 months, aligning with industrial composting times. The evolution of the morphology of the materials unveiled polymer specific degradation mechanisms. Both Safety requirements for organic farming were met. Ecotoxicity tests showed no adverse effects, agronomic fertilizing and amending quality was high, the materials compost even enhancing barley growth. The ecological impact assessment demonstrated an advantage for composting over incineration for seven of the eight indicators. In conclusion, this study shows the successful integration of compostable materials into industrial composting, upholding product safety and quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Introduction: Illicit smokeless tobacco (ST) trade has seldom been documented despite ST use in at least 127 countries across the world. Based on non-compliance with packaging regulations, we report the proportion of illicit ST products from samples on sale in Bangladesh, India and Pakistan where 85% of global ST users reside., Methods: We purchased unique ST products from tobacco sellers in two purposively selected administrative areas (division/district) in each of the three countries. The criteria to determine illicit ST products were based on country-specific legal requirements for ST packaging and labelling. These requirements included: 'market retail price disclosure', 'sale statement disclosure', 'pictorial health warning (PHW) pertinence', 'appropriate textual health warning' and 'using misleading descriptors (MDs)'. Non-compliance with even one of the legal requirements was considered to render the ST product illicit., Results: Almost all ST products bought in Bangladesh and India were non-compliant with the local packaging requirements and hence potentially illicit, all products in Pakistan lacked desirable features. The most common feature missing was health warnings: 84% packs in Bangladesh, 93% in India, and 100% in Pakistan either did not have PHW or their sizes were too small. In Bangladesh, 61% packs carried MDs. In India and Pakistan, the proportions of such packs were 32% and 42%, respectively., Conclusions: Weak and poorly enforced ST control policies may be slowing the progress of tobacco control in South Asia. Standardised regulations are required for packaging and labelling ST. Improving compliance and reducing sale of cheap illicit products may require business licensing and market surveillance., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. Re-use permitted under CC BY. Published by BMJ.)

Background: In Bangladesh, smokeless tobacco (SLT) is available in a variety of pack shapes and sizes. Lack of standard packaging could limit compliance with pictorial health warning label (HWL) requirements. We explored Bangladeshi SLT users' and non-users' perceptions of a proposed standard pack shape for gul (tobacco powder) and zordha (chewing tobacco), including the role that HWL placement plays on harm perceptions., Methods: We conducted 28 focus groups across three regions of Bangladesh: Dhaka, Sylhet and Khulna. Groups were stratified equally by urban/rural residence, gender and SLT use. Trained facilitators used a standardised guide to discuss perceived attractiveness, noticeability of HWLs and perceived harm of current versus standard packs., Results: Most groups found bright colours, 'brand owner' portrait imagery, and strong, sturdy pack material of current packs attractive. Many of the same features increased perceived attractiveness of the standard packs. Pictorial HWLs on the standard packs appeared larger and increased the visibility and noticeability of HWLs compared with current packs. Lack of HWLs or limited visibility of HWL due to discolouration contributed to lower levels of perceived harm of the current packs. In contrast, HWL prominence and placement on both sides of the standard pack increased perceived harm of standard packs., Conclusion: The findings suggest a standard shape and size for SLT sold in Bangladesh, coupled with proper implementation of HWLs per the law, could improve HWL noticeability and increase harm perceptions. Additional plain packaging policies that also standardise pack colour may be required to reduce attractive colours and branding., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2024. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Competing Interests: Competing interests: None declared.

Chicken gelatin derived from poultry by-product was combined with caffeic acid (CA), rutin (RUT) and glycerol (GLY) to obtain biodegradable films. Optimum cross-linking conditions were investigated using Response Surface Methodology (RSM). The results showed that cross-linking led to lower L* value and higher b*, and the higher opacity values in the films. Water solubility (WS) decreased up to 50% after the incorporation of 1.25% CA compared to the commercial gelatin (cattle and pig based) films. Crosslinking improved the thermal stability and the tensile strength (TS) of films. Optimized cross-linking combination was determined as 0.96-1.56% CA, 0-1.25% RUT, and 29.5-30.5% GLY. Overall, this study demonstrated that crosslinking by CA and RUT can be used to improve the physical and barrier properties of gelatin films having excellent potential for the development of biodegradable films for packaging uses. These films may also result in an improvement and added value in poultry by-products., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Whether plastic packaging waste is disposed of in different bins (source separation, S) or in a single bin (post source separation, P) is generally assumed to impact the waste stream's quality. To elucidate this question, we evaluated the quality of LDPE, HDPE, and PP plastic waste from both separation systems (S and P) through a concise analytical strategy. The materials received similar treatment after collection (e.g., washing, NIR-sorting). A multivariate approach to ATR-FTIR spectroscopy was developed to assess their material composition and the effect of washing. Results were complemented by TGA, DSC, and py-GC/MS analysis. The material performance was investigated by a lab-scale extrusion and granulation, followed by an assessment of the mechanical properties and the melt volume rate. Our study reveals the HDPE materials to be of good quality, regardless of their source. For LDPE and PP, the P-materials are fractionally more contaminated after washing. Both PP-materials display poor material performance with highly fluctuating elongations-at-break (between 30% and 380%). S-LDPE was found to contain more polymeric impurities than P-LDPE. We conclude that the quality depends strongly on the material type and on the treatment after collection (washing, sorting). The multivariate approach to FTIR data evaluation we propose aims at simplifying the quality evaluation of polyolefin waste plastics and may serve as a basis for future work in this field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Despite international efforts to foster the circular economy, plastic waste remains a major environmental problem. In the circular economy, the success of a waste management system depends, inter alia, on consumers properly sorting their plastic waste. Yet mis-sorting of plastic food packaging waste happens routinely. We sought to find out why and to outline the ways consumers prefer to receive information about waste sorting procedures. Tailoring information to consumer preferences can improve the effectiveness of waste management policy. Using the Motivation Opportunity Ability (MOA) framework to explain consumer behaviour, we conducted focus group discussions in two German cities. Our findings suggest that more accurate information and financial incentives best motivate consumers to sort waste correctly. Uncertainty and confusion over the packaging material are the most severe hindrances to correct sorting behaviour. The Internet and social media are preferred most for acquiring information on how to sort plastic food packaging correctly. Policymakers can use our results to adjust packaging and waste management regulations to help eliminate confusion among consumers and to facilitate their recycling intentions. Food industry practitioners and company decision makers can use our results to adjust their plastic packaging features to better match consumer preferences for easily recyclable waste., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Waste from public places like parks, pedestrian zones or sidewalks is a visible yet unexploited waste stream. Publications and information on the amounts and makeup of this waste flow are very scarce. To evaluate the resource potential and enable waste management planning, this study aims to assess the quality and quantity of public waste in a detailed waste characterisation campaign. For the first time, an analysis at this level of detail was conducted in a medium-sized town (25,000 inhabitants) in Austria. The sampling campaign included the whole town area. In total, almost 1000 kg of waste was sorted in up to 88 different fractions, which allows the detailed composition of, for example, packaging waste and single-use plastics to be delineated. We found that the amount of waste collected in public street bins is approximately 2.6 % of the total mixed municipal solid waste, resulting in 4.1 kg of public waste per inhabitant annually. The vast majority of this waste is currently collected as mixed waste. The results indicate a high share (52 %) of recyclable materials (glass, metal, paper and lightweight packaging) in mixed public waste, most of which is packaging (44 % of total waste). Other large shares include dog feces (18 % of total waste) and biogenic waste (17 % of total waste). The results lay the foundation for further investigations into, for example, exploiting recycling potential or evaluating possible improvements in separate waste collection in public spaces. Further, the collected data serve as an essential knowledge basis for policymakers and local authorities., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Recent decades have witnessed a surge in research interest in bio-nanocomposite-based packaging materials, but still, a lack of systematic analysis exists in this domain. Bio-based packaging materials pose a sustainable alternative to petroleum-based packaging materials. The current work employs bibliometric analysis to deliver a comprehensive outline on the role of bio nanocomposites in packaging. India, Iran, and China were revealed to be the top three nations actively engaged in this domain in total publications. Islamic Azad University in Iran and Universiti Putra Malaysia in Malaysia are among the world's best institutions in active research and publications in this field. The extensive collaboration between nations and institutions highlights the significance of a holistic approach towards bio-nanocomposite. The National Natural Science Foundation of China is the leading funding body in this field of research. Among authors, Jong whan Rhim secured the topmost citations (2234) in this domain (13 publications). Among journals, Carbohydrate Polymers secured the maximum citation count (4629) from 36 articles; the initial one was published in 2011. Bio nanocomposite is the most frequently used keyword. Researchers and policymakers focussing on sustainable packaging solutions will gain crucial insights on the current research status on packaging solutions using bio-nanocomposites from the conclusions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Smart bins can increase transparency and accuracy in monitoring waste characteristics such as weight, volume, and disposal times. This information can aid in enforcing waste reduction policies, including the pay-as-you-throw (PAYT) system. However, the public's response to this technology remains uncertain. Despite Japan's reputation for high waste separation compliance and collection rates, it has one of the world's highest per capita rates of plastic and packaging waste generation. This study surveyed 1000 Japanese individuals regarding their perception of smart bin features and their potential to encourage waste reductions. Multiple correspondence analysis (MCA) was used to explore the relationships between respondents' social attributes and their responses. The findings indicate a slightly higher responses from younger respondents (above 85 % of those age 10-29 compared to around 75 % of those aged 60 and older) who were in favour of smart bin technology functions such as unscheduled waste pick up and automatized waste separation. On the other hand, there was a strong unwillingness (0.57 count ratio) to reduce plastic waste even if a smart bin assisted PAYT is introduced from those who did not engage in waste separation and cleaning in the first place. Finally, an open-ended question about strategies to reduce plastic waste resulted in a large portion of mindset change ideas (24.8 % of the female respondents) and technology innovations proposals (24 % of male respondents). Although development of a smart-bin prototype is taking place, behavioral change strategies to foster a willingness to reduce waste must take place along with technological interventions., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Hiroshi Onoda reports financial support was provided by Environmental Restoration and Conservation Agency. Andante Hadi Pandyaswargo reports was provided by Japan Society for the Promotion of Science. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Cellulose nanofibers (CNF) based films are promising packaging materials, but the lack of special functions (especially UV-shielding property) usually restrict their further applications. In this work, MXene was incorporated into the CNF film by a direct solvent volatilization induced film forming method to study its UV-shielding property for the first time, which avoided the using of a vacuum filtration equipment. The composite films containing glycerin could be folded repeatedly without breaking, showing good flexibility. The structure and properties of MXene/CNF composite films (CMF) were characterized systematically. The results showed that MXene distributed uniformly in the CNF film matrix and there was strong hydrogen bonding interaction between CNF and MXene. The tensile strength and Young's modulus of the composite films could reach 117.5 MPa and 2.23 GPa, which was 54.1 % and 59.2 % higher than those of pure CNF film, respectively. With the increase of MXene content, both the UVA and UVB shielding percentages increased significantly from 17.2 % and 25.5 % to 100.0 %, showing excellent UV-shielding property. Moreover, CMF exhibited a low oxygen permeability (OP) value of 0.39 cc μm d -1  m -2  kPa -1 , a low water vapor permeability (WVP) value of 5.13 × 10 -11  g -1 s -1 Pa -1 and a high antibacterial rate against E. coli (94.1 % at 24 h), showing potential application in the packaging field., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Plastics are a vital component of our daily lives in the contemporary globalization period; they are present in all facets of modern life. Because the bulk of synthetic plastics utilized in the market are non-biodegradable by nature, the issues associated with their contamination are unavoidable in an era dominated by polymers. Polyethylene terephthalate (PET), which is extensively used in industries such as automotive, packaging, textile, food, and beverages production represents a major share of these non-biodegradable polymer productions. Given its extensive application across various sectors, PET usage results in a considerable amount of post-consumer waste, majority of which require disposal after a certain period. However, the recycling of polymeric waste materials has emerged as a prominent topic in research, driven by growing environmental consciousness. Numerous studies indicate that products derived from polymeric waste can be converted into a new polymeric resource in diverse sectors, including organic coatings and regenerative medicine. This review aims to consolidate significant scientific literatures on the recycling PET waste for electrochemical device applications. It also highlights the current challenges in scaling up these processes for industrial application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Among the common natural biomolecules, the excellent properties of proteins have attracted extensive attention from researchers for functional applications, however, in native form proteins have many limitations in the performance of their functional attribute. However, with the deepening of research, it has been found that the combination of natural active substances such as polyphenols, polysaccharides, etc. with protein molecules will make the composite system have stronger functional properties, while the utilization of pH-driven method, ultrasonic treatment, heat treatment, etc. not only provides a guarantee for the overall protein-based composite system, but also gives more possibilities to the protein-composite system. Protein composite systems are emerging in the fields of novel active packaging, functional factor delivery systems and gel systems with high medical value. The products of these protein composite systems usually have high functional properties, mainly due to the interaction of the remaining natural active substances with protein molecules, which can be broadly categorized into covalent interactions and non-covalent interactions, and which, despite the differences in these interactions, together constitute the cornerstone for the stability of protein composite systems and for in-depth research., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Hao Zhang reports article publishing charges and equipment, drugs, or supplies were provided by National Natural Science Foundation of China. Hao Zhang reports a relationship with National Natural Science Foundation of China that includes: funding grants., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Encouraging the recycling of plastic packaging materials in express delivery is a necessary step toward environmentally friendly industrial development. In this study, we present a framework for analyzing the flow of materials in express plastic packaging, from production and manufacturing to consumption and recycling. In examining the use of recycled materials in post-consumer express plastic packaging and the destination of consumer packaging waste in 2020 and 2021, we found that 44.4% (1613.6 Gg) of the studied express plastic packaging was incinerated. Additionally, approximately 1296.6 Gg of express plastic packaging flowed into rural areas. Our calculations showed that the ΔRSE in 2020 was 15.1%, and on the condition that 25% separated collection with 80% recycling, ΔRSE would be - 0.5%. Results verified that separated collection is an important step in the recycling strategy for packaging materials. Survey data from universities in Beijing indicate that currently, 26% of college students are participating in the separate collection of packaging., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Polyphenols and enzymes usually suffer from degradation during transportation due to the lack of a cold chain system in developing countries and regions. In this study, anthocyanin and trypsin were selected as examples of polyphenols and enzymes and investigated for minimizing their degradation during ambient transportation using hydrogel packaging with combined evaporative and daytime radiative cooling functions. A polyacrylamide/polyvinyl alcohol contained with nanoparticles (NPs@PAAm/PVA) hydrogel packaging was thus developed. The NPs@PAAm/PVA packaging exhibited desirable swelling behaviour, high solar reflectance, and strong atmospheric emissivity to synergistically achieve evaporative and daytime radiative cooling. The indoor experiments indicated that the vial with NPs@PAAm/PVA packaging realised sub-ambient temperatures under different working temperatures and humidities, and the field tests indicated that the vial with NPs@PAAm/PVA packaging could effectively preserve the anthocyanin and trypsin without degradation caused by strong sunlight and high temperature. Consequently, the NPs@PAAm/PVA packaging with evaporative and daytime radiative cooling effects has promising prospects for anthocyanin and trypsin transportation in an energy-saving and sustainable manner., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: IQOS, manufactured by Philip Morris International (PMI), is the highest selling heated tobacco product globally. IQOS went through several regulatory changes in Israel: from no oversight to minimal tobacco legislation, to progressive legislation that included a partial advertisement ban (exempting print media) and plain packaging. We examined how PMI's advertising messages changed during these regulatory periods for both IQOS and cigarettes., Methods: Content analysis of PMI's IQOS and cigarette ads was performed using a predefined framework. Ad characteristics included regulatory period, target population, setting, product presentation, age and use restrictions, retail accessibility, additional detail cues (eg, QR code) and promotions. Ad themes included product features, legislation-related elements, social norms and comparative claims. Comparisons between IQOS and cigarette ads, and across regulatory periods, were examined using χ 2 test or Fisher's exact test., Results: The dataset included 125 IQOS ads and 71 cigarette ads. IQOS ads featured more age restrictions, retail accessibility and additional detail cues, compared with cigarette ads (93.6% vs 16.9%; 56.0% vs 0.0%; and 95.2% vs 33.8%, p<0.001 for all). Cigarette ads featured mostly price promotions (52.1% vs 10.1% of IQOS ads, p<0.001). The main ad themes were technology for IQOS (85.6%) and quality for cigarettes (50.7%). In later (vs earlier) restrictive regulatory periods, IQOS ads featured more direct comparisons to cigarettes, QR codes and indoor settings, and did not feature product packaging., Conclusions: IQOS advertisement content shifted as more restrictions went into effect, with several elements used to circumvent legislation. Findings from this study point to the necessity of a complete advertisement ban and ongoing marketing surveillance., Competing Interests: Competing interests: YB-Z has received fees for lectures in the past (2012 to July 2019) from Pfizer, Novartis NCH and GSK Consumer Health (distributors of smoking cessation pharmacotherapy in Israel). HL had received fees for lectures from Pfizer Israel (distributor of a smoking cessation pharmacotherapy in Israel) in 2017. LA receives royalties for the sale of Text2Quit., (© Author(s) (or their employer(s)) 2024. No commercial re-use. See rights and permissions. Published by BMJ.)

The global plastic waste problem is pushing for the development of sustainable alternatives, encouraged by stringent regulations combined with increased environmental consciousness. In response, this study presents an industrial-scale proof of concept to produce self-standing, transparent, and flexible bioplastic films, offering a possible solution to plastic pollution and resource valorization. We achieve this by combining amyloid fibrils self-assembled from food waste with methylcellulose and glycerol. Specifically, soy whey and okara, two pivotal protein-rich byproducts of tofu manufacturing, emerge as sustainable and versatile precursors for amyloid fibril formation and bioplastic development. An exhaustive industrial-scale feasibility study involving the transformation of 500 L of soy whey into ∼1 km (27 kg) of bioplastic films underscores the potential of this technology. To extend the practicality of our approach, we further processed a running kilometer of film at the industrial scale into transparent windows for paper-based packaging. The mechanical properties and the water interactions of the novel film are tested and compared with those of commercially used plastic films. By pioneering the large-scale production of biodegradable bioplastics sourced from food byproducts, this work not only simultaneously addresses the dual challenges of plastic pollution and food waste but also practically demonstrates the feasibility of biopolymeric building block valorization for the development of sustainable materials in real-world scenarios.

The widespread use of starch-based films is hindered by inadequate tensile strength and high water sensitivity. To address these limitations, a novel starch film with a dynamic network structure was produced via the dehydration-condensation reaction of N, N'-methylene diacrylamide (MBA) and microcrystalline cellulose (MCC). The improvement in mechanical properties was enhanced by the incorporation of MCC, which was achieved through intermolecular hydrogen bonding and chemical crosslinking. To verify the interactions among MCC, MBA, and starch, x-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR), and x-ray diffraction (XRD) were conducted. The results established the predicted interactions. The dynamic network structure of the film reduced the water absorption capacity (WAC) of starch and MCC hydroxyl groups, as confirmed by differential scanning calorimeter (DSC) and dynamic mechanical thermal analysis (DMTA). These analyses showed a restriction in the mobility of starch chains, resulting in a higher glass transition temperature (Tg) of 69.26 °C. The modified starch films exhibited excellent potential for packaging applications, demonstrating a higher contact angle (CA) of 89.63°, the lowest WAC of 4.73 g/g, and the lowest water vapor transmission rate (WVTR) of 13.13 g/m 2 /d, along with improved mechanical properties and identical light transmittance compared to pure starch films., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The present study investigates the biopolymer packaging film developed from carboxymethyl cellulose (CMC) with varying concentrations of natural rubber latex (NR) and oxidised natural rubber latex (ONR) using the solvent casting method. The physicochemical properties of the CMC/NR and CMC/ONR film samples were characterised using FTIR, TG/DTA, DSC, SEM, and XRD analysis. The increased concentration of NR and ONR helped to enhance mechanical characteristics, superior UV resistance, enhanced resistance to oxygen and water vapour penetration, improved dimensional stability, and a reduction in the moisture retention ability of the film samples. The CMC sample film, incorporated with 1.5 g ONR, was found to have more than a 100 % increase in the tensile strength. The tensile value increased from 21.56 MPa to 48.36 MPa, with the highest young modulus of 0.73 GPa and elastic stability of 7.14 %. The incorporation of NR and ONR significantly reduced the super water absorbency nature of the CMC film, and the moisture content values reduced from 21.6 % to ≅ 0.15 % for ONR-incorporated film. Additionally, the CMC/NR and CMC/ONR films exhibited high optical transparency values and were found to be fast biodegradable, substantiating their potential use in various packaging applications. Application of these materials in perishable fruit packaging has shown significant enhancement in shelf life, highlighting their practical efficiency and potential for sustainable packaging solutions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Plastics have a significant role in various sectors of the global economy since they are widely utilized in agriculture, architecture, and construction, as well as health and consumer goods. They play a crucial role in several industries as they are utilized in the production of diverse things such as defense materials, sanitary wares, tiles, plastic bottles, artificial leather, and various other household goods. Plastics are utilized in the packaging of food items, medications, detergents, and cosmetics. The overconsumption of plastics presents a significant peril to both the ecosystem and human existence on Earth. The accumulation of plastics on land and in the sea has sparked interest in finding ways to breakdown these polymers. It is necessary to employ suitable biodegradable techniques to decrease the accumulation of plastics in the environment. To address the environmental issues related to plastics, it is crucial to have a comprehensive understanding of the interaction between microorganisms and polymers. A wide range of creatures, particularly microbes, have developed techniques to survive and break down plastics. This review specifically examines the categorization of plastics based on their thermal and biodegradable properties, as well as the many types of degradation and biodegradation. It also discusses the various types of degradable plastics, the characterization of biodegradation, and the factors that influence the process of biodegradation. The plastic breakdown and bioremediation capabilities of these microbes make them ideal for green chemistry applications aimed at removing hazardous polymers from the ecosystem., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Pharmaceutical packaging waste has increased due to a higher global demand for pharmaceutical products, leading to more waste generation and associated environmental impacts. The main goal of this article is to present a cradle-to-grave life cycle assessment of pharmaceutical packaging, evaluating end-of-life (EoL) alternatives, aiming to identify hotspots and opportunities for improvement. A life cycle model was implemented for three types of pharmaceutical packaging (blisters, sachets, bottles; 23 packaging). The functional unit is the storage and delivery of medicines containing the same active pharmaceutical ingredient, dosage, and amount of medicines. Two EoL analyses were performed: 1) compare take-back (recycling and incineration) with domestic waste collection (landfill or incineration); and 2) assess different EoL situations of pharmaceutical packaging in Europe. A life cycle impact assessment was performed for 13 categories. Analysis 1 shows that take-back presents lower environmental impacts than domestic waste collection for seven out of 13 categories due to paper and glass recycling benefits. Analysis 2 shows that in the take-back, higher amounts of packaging are recycled or incinerated, which leads to lower EoL impacts. A sensitivity analysis was performed to evaluate the influence of parameters and assumptions in packaging EoL impacts. Packaging production contributes significantly to life cycle impacts, followed by transportation, EoL, and packing process. Ecodesign initiatives are recommended, such as packaging with less material and volume, using materials with lower impacts to significantly reduce the impacts of pharmaceutical packaging., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Objectives: Sterilized reusable medical devices have a use-by date, after which sterility is no longer guaranteed. There is currently no consensus on how this should be determined. The aim is to re-evaluate the expiry date of reusable medical devices, by means of a risk analysis and an assessment of the maintenance of the sterile state of reusable medical devices over time., Methods: The risk analysis focused on the stages whose malfunction could compromise the sterility of reusable medical devices over time: packaging, transport and storage. Risk mapping was carried out in accordance with the methodology recommended by the French Health Authority. Based on standard NF EN ISO 11737, the assessment of the maintenance of the sterile state was checked on reusable medical devices after two, four and six months storage and on reusable medical devices that had expired more than a year previously., Results: The risk analysis identified four failures and sixty-eight potential causes. The most sensitive stage was storage, which accounted for most of the critical and major causes. Improvement actions were proposed, such as the definition of a container maintenance plan. At the same time, 256 reusable medical devices were tested. The cultures remained sterile for all the containers, for folded products tested at 6 months and more and for the sachets tested at 2 and 4 months and at more than one year of storage., Conclusions: The DLU has been extended to 4 months for sachets, 6 months for folded products and maintained at six months for containers., (Copyright © 2023 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.)

Introduction: Vaping is not risk-free but can help those who smoke to reduce harm to health and stop smoking. However, packaging of vaping products, including e-liquids, appeals to youth and might facilitate vaping among nicotine-naïve people. Standardized packaging of vaping products could moderate the appeal of vaping among youth. This study assessed how youth interest in trying and perceived health harms of using e-liquids are associated with branded or standardized (white or olive) e-liquid packaging with different nicotine levels displayed., Aims and Methods: A between-subject experiment with three packaging and two nicotine level conditions included youth (n = 13801) aged 16 to 19 from England, Canada, and the United States as a part of a cross-sectional online survey in August-September 2021. Participants' interest in trying and perceived harm of e-liquids were analyzed using logistic and multinomial regressions adjusted for age, sex, race or ethnicity, country, vaping, and smoking status., Results: Compared with branded e-liquid packs, more youth reported no interest in trying e-liquids in white (aOR = 1.48, 95% CI = 1.34 to 1.64) or olive (aOR = 1.62, 95% CI: 1.47 to 1.80) standardized packs. Compared with branded e-liquid packs, more youth inaccurately perceived e-liquids in white (aOR = 1.22, 95% CI: 1.11 to 1.34) or olive (aOR = 1.29, 95% CI: 1.18 to 1.41) standardized packs as equally or more harmful than smoking. E-liquid nicotine levels displayed on packs were not associated with youth interest in trying or harm perceptions of using e-liquids., Conclusions: Among 16- to 19-year-old youth from England, Canada, and the United States, standardized packaging of e-liquids was associated with lower interest in trying and higher health risk perceptions., Implications: Branded packaging of vaping products appeal to youth and might prompt nicotine use among those who had never smoked. This study suggests that restricting branding elements on e-liquid packaging is associated with youth's lower interest in trying e-liquids and higher misperceptions that vaping is equally or more harmful than smoking. Standardized packaging might reduce appeal of vaping among youth, but its potential to discourage vaping for harm reduction should also be considered., (© The Author(s) 2023. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco.)

Competing Interests: Competing interests: TD is an Associate Editor of Tobacco Control with respect to Product Marketing and Promotion. He has also served as an expert witness in tobacco litigation for plaintiff counsel in class action lawsuits as well as for governments whose policies regarding the marketing and promotion of tobacco products were challenged on constitutional grounds.