Search

Food availability has been endangered by recent global events, where agriculture, the main food source for the global population, is expected to increase even more to fulfill the growing food demand. Along with food production, water and energy consumption are also increased, leading to over-extraction of groundwater and an excess emission of greenhouse gases due to fossil fuel consumption. In this context, a balance of these three resources is crucial; therefore, the water-energy-food nexus is considered to address the previous issues by designing an energy-water management system based on robust predictive control. This controller estimates the future worst-case scenario for multiple climatic conditions, such as solar radiation, ambient temperature, wind speed, precipitation, and groundwater recharge, to define an optimal irrigation volume, maximize crop growth, and minimize water consumption. At the same time, the controller schedules daily irrigation and groundwater extraction, considering energy availability from solar generation and storage, to fulfill the previously defined irrigation volume while minimizing operating costs. Climate prediction is done through fuzzy prediction intervals, whose lower or upper bound are used as worst-case to include climate uncertainty on the controller design. The energy-water management system is tested in different experiments, where results show that considering a robust approach ensures maximum crop development, avoids over-extraction of groundwater, and prioritizes renewable energy sources. This work proposes a robust energy-water management system designed to be sustainable. Considering the water-energy-food nexus, the system ensures food security and proper resource allocation, tackling global starvation, water availability, and energy access., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This paper presents a novel methodology that combines fractional-order control theory with robust control under a parametric uncertainty approach to enhance the performance of linear time-invariant uncertain systems with integer or fractional order, referred to as Fractional-Order Robust Control (FORC). In contrast to traditional approaches, the proposed methodology introduces a novel formulation of inequalities-based design, thus expanding the potential for discovering improved solutions through linear programming optimization. As a result, fractional order controllers are designed to guarantee desired transient and steady-state performance in a closed-loop system. To enable the digital implementation of the designed controller, an impulse response invariant discretization of fractional-order differentiators (IRID-FOD) is employed to approximate the fractional-order controllers to an integer-order transfer function. Additionally, Hankel's reduction order method is applied, thus making it suitable for hardware deployment. Experimental tests carried out in a thermal system and the assessment results, based on time-domain responses and robustness analysis supported by performance indices and set value analysis in a thermal system test-bed, demonstrate the improved and robust performance of the proposed FORC methodology compared to classical robust control under parametric uncertainty., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 International Society of Automation. Published by Elsevier Ltd. All rights reserved.)

Robust control of uncertain fully actuated systems (FASs) with nonlinear uncertainties and perturbed input matrices is considered. Motivated by the recent work on this issue, two novel robust controllers are further developed for two cases under different assumptions. For both cases, the assumption on the perturbation input matrix in the previous work is relaxed to a significant extent, which allows many typical perturbation input matrices, such as constant ones, to be handled, while the previous method cannot. Moreover, for the first case, the assumption on the system uncertainty is further relaxed, and the states of the closed-loop system are globally bounded and converge into an arbitrarily small spherical domain centered at the origin. For the second case, with another requirement on the system nonlinearity imposed, the global exponential stability of the closed-loop system is achieved. The successful application in an electromechanical system verifies the effectiveness of the method., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 International Society of Automation. Published by Elsevier Ltd. All rights reserved.)

This article introduces a model-based robust control framework for electrohydraulic soft robots. The methods presented herein exploit linear system control theory as it applies to a nonlinear soft robotic system. We employ dynamic mode decomposition with control (DMDc) to create appropriate linear models from real-world measurements. We build on the theory by developing linear models in various operational regions of the system to result in a collection of linear plants used in uncertainty analysis. To complement the uncertainty analyses, we utilize H ∞ ("H Infinity") synthesis techniques to determine an optimal controller to meet performance requirements for the nominal plant. Following this methodology, we demonstrate robust control over a multi-input multi-output (MIMO) hydraulically amplified self-healing electrostatic (HASEL)-actuated system. The simplifications in the proposed framework help address the inherent uncertainties and complexities of compliant robots, providing a flexible approach for real-time control of soft robotic systems in real-world applications., Competing Interests: SM is listed as an inventor on a U.S. patent application US10995779B2 and US20210003149A1 which cover fundamentals and basic designs of HASEL actuators. SM is a co-founder of Artimus Robotics, a start-up company commercializing HASEL actuators. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Volchko, Mitchell, Scripps, Turin and Humbert.)

Uncertainty can lead to jitter or overshoot in mechanical systems, necessitating the design of multiple constraints to stabilize them. This paper proposes a control structure based on the generalized Udwadia-Kalaba equation to address these constraints simultaneously. An uncertain dynamical model is developed, incorporating both equality and inequality constraints. By integrating diffeomorphism theory, a robust control strategy is designed to ensure compliance with these constraints. Utilizing the Lyapunov approach, the uniform boundedness and uniform ultimate boundedness of the dynamical system are demonstrated. Finally, the feasibility of the proposed control method is validated through its application to a belt conveyor system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 ISA. Published by Elsevier Ltd. All rights reserved.)

Objective . Closed-loop deep brain stimulation (DBS) is a promising therapy for Parkinson's disease (PD) that works by adjusting DBS patterns in real time from the guidance of feedback neural activity. Current closed-loop DBS mainly uses threshold-crossing on-off controllers or linear time-invariant (LTI) controllers to regulate the basal ganglia (BG) Parkinsonian beta band oscillation power. However, the critical cortex-BG-thalamus network dynamics underlying PD are nonlinear, non-stationary, and noisy, hindering accurate and robust control of Parkinsonian neural oscillatory dynamics. Approach . Here, we develop a new robust adaptive closed-loop DBS method for regulating the Parkinsonian beta oscillatory dynamics of the cortex-BG-thalamus network. We first build an adaptive state-space model to quantify the dynamic, nonlinear, and non-stationary neural activity. We then construct an adaptive estimator to track the nonlinearity and non-stationarity in real time. We next design a robust controller to automatically determine the DBS frequency based on the estimated Parkinsonian neural state while reducing the system's sensitivity to high-frequency noise. We adopt and tune a biophysical cortex-BG-thalamus network model as an in-silico simulation testbed to generate nonlinear and non-stationary Parkinsonian neural dynamics for evaluating DBS methods. Main results . We find that under different nonlinear and non-stationary neural dynamics, our robust adaptive DBS method achieved accurate regulation of the BG Parkinsonian beta band oscillation power with small control error, bias, and deviation. Moreover, the accurate regulation generalizes across different therapeutic targets and consistently outperforms current on-off and LTI DBS methods. Significance . These results have implications for future designs of closed-loop DBS systems to treat PD., (© 2024 IOP Publishing Ltd.)

In this study, piezoelectric patches are used as actuators to dampen structural oscillations. Damping oscillations is a significant engineering challenge, and the use of piezoelectric patches in smart structures allows for a reduction in oscillations through sophisticated control methods. This analysis involved H-infinity (H∞) robust analysis. H∞ (H-infinity) control formulation is a robust control design method used to ensure system stability and performance under disturbances. When applied to piezoelectric actuators in smart structures, H∞ control aims to design controllers that are robust to variations in system dynamics, external disturbances, and modeling uncertainties, while meeting specified performance criteria. This study outlines the piezoelectric effects and advanced control strategies. A structural model was created using finite elements, and a smart structural model was analyzed. Subsequently, dynamic loads were applied and oscillation damping was successfully achieved by employing advanced control techniques.

For most nanopositioning systems, maximizing positioning bandwidth to accurately track periodic and aperiodic reference signals is the primary performance goal. Closed-loop control schemes are employed to overcome the inherent performance limitations such as mechanical resonance, hysteresis and creep. Most reported control schemes are integer-order and combine both damping and tracking actions. In this work, fractional-order controllers from the positive position feedback family namely: the Fractional-Order Integral Resonant Control (FOIRC), the Fractional-Order Positive Position Feedback (FOPPF) controller, the Fractional-Order Positive Velocity and Position Feedback (FOPVPF) controller and the Fractional-Order Positive, Acceleration, Velocity and Position Feedback (FOPAVPF) controller are designed and analysed. Compared with their classical integer-order implementation, the fractional-order damping and tracking controllers furnish additional design (tuning) parameters, facilitating superior closed-loop bandwidth and tracking accuracy. Detailed simulated experiments are performed on recorded frequency-response data to validate the efficacy, stability and robustness of the proposed control schemes. The results show that the fractional-order versions deliver the best overall performance., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 University of Aberdeen. Published by Elsevier Ltd.. All rights reserved.)

This paper proposes a new sensor using optical flow to stabilize a quadrotor when a GPS signal is not available. Normally, optical flow varies with the attitude of the aerial vehicle. This produces positive feedback on the attitude control that destabilizes the orientation of the vehicle. To avoid this, we propose a novel sensor using an optical flow camera with a 6DoF IMU (Inertial Measurement Unit) mounted on a two-axis anti-shake stabilizer mobile aerial gimbal. We also propose a robust algorithm based on Sliding Mode Control for stabilizing the optical flow sensor downwards independently of the aerial vehicle attitude. This method improves the estimation of the position and velocity of the quadrotor. We present experimental results to show the performance of the proposed sensor and algorithms.

Malicious attacks are often inevitable in cyber-physical systems (CPS). Accuracy in Cyber physical system for position tracking of servos is the major concern now a days. In high precision industrial automation, it is very hard to achieve accuracy in tracking especially under malicious cyber-attacks, control saturations, parametric perturbations and external disturbances. In this paper, we have designed a novel predefined time (PDT) convergence sliding mode adaptive controller (PTCSMAC) for such kind of cyber physical control system. Main key feature of our control is to cope these challenges that are posed by CPS systems such as parameter perturbation, control saturation, and cyber-attacks and the whole system then upgrade to a third-order system to facilitate adaptive control law. Then, we present an adaptive controller based on the novel PDT convergent sliding mode surface (SMS) combined with a modified weight updated Extreme Learning Machine (ELM) which is used to approximate the uncertain part of the system. Another significant advantage of our proposed control approach is that it does not require detailed model information, guaranteeing robust performance even when the system model is uncertain. Additionally, our proposed PTCSMAC controller is nonsingular regardless of initial conditions, and is capable of eradicating the possibility of singularity problems, which are frequently a concern in numerous CPS control systems. Finally, we have verified our designed PTCSMAC control law through rigorous simulations on CPS seeker servo positioning system and compared the robustness and performance of different existing techniques., (© 2024. The Author(s).)

Introduction: The tendon-sheath actuated bending-tip system (TAB) has been widely applied to long-distance transmission scenes due to its high maneuverability, safety, and compliance, such as in exoskeleton robots, rescue robots, and surgical robots design. Due to the suitability of operation in a narrow or tortuous environment, TAB has demonstrated great application potential in the area of minimally invasive surgery. However, TAB involves highly non-linear behavior due to hysteresis, creepage, and non-linear friction existing on the tendon routing, which is an enormous challenge for accurate control., Methods: Considering the difficulties in the precise modeling of non-linearity friction, this paper proposes a novel fuzzy control scheme for the Euler-Lagrange dynamics model of TAB for achieving tracking performance and providing accurate friction compensation. Finally, the asymptotic stability of the closed-loop system is proved theoretically and the effectiveness of the controller is verified by numerical simulation carried out in MATLAB/Simulink., Results: The desired angle can be reached quickly within 3 s by adopting the proposed controller without overshoot or oscillation in Tracking Experiment, demonstrating the regulation performance of the proposed control scheme. The proposed method still achieves the desired trajectory rapidly and accurately without steady-state errors in Varying-friction Experiment. The angle errors generated by external disturbances are < 1 deg under the proposed controller, which returns to zero in 2 s in Anti-disturbance Experiment. In contrast, comparative controllers take more time to be steady and are accompanied by oscillating and residual errors in all experiments., Discussion: The proposed method is model-free control and has no strict requirement for the dynamics model and friction model. It is proved that advanced tracking performance and real-time response can be guaranteed under the presence of unknown bounded non-linear friction and time-varying non-linear dynamics., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Ren, Wang, Yu and Han.)

In the field of aerospace, large and heavy cabin segments present a significant challenge in assembling space engines. The substantial inertial force of cabin segments' mass often leads to unexpected motion during docking, resulting in segment collisions, making it challenging to ensure the accuracy and quality of engine segment docking. While traditional manual docking leverages workers' expertise, the intensity of the labor and low productivity are impractical for real-world applications. Human-robot collaboration can effectively integrate the advantages of humans and robots. Parallel robots, known for their high precision and load-bearing capacity, are extensively used in precision assembly under heavy load conditions. Therefore, human-parallel-robot collaboration is an excellent solution for such problems. In this paper, a framework is proposed that is easy to realize in production, using human-parallel-robot collaboration technology for cabin segment docking. A fractional-order variable damping admittance control and an inverse dynamics robust controller are proposed to enhance the robot's compliance, responsiveness, and trajectory tracking accuracy during collaborative assembly. This allows operators to dynamically adjust the robot's motion in real-time, counterbalancing inertial forces and preventing collisions between segments. Segment docking assembly experiments are performed using the Stewart platform in this study. The results show that the proposed method allows the robot to swiftly respond to interaction forces, maintaining compliance and stable motion accuracy even under unknown interaction forces.

The uncertainty in mobile robot greatly affects control accuracy. This makes it difficult to apply to more rigorous high-precision engineering fields. Therefore, the fuzzy set theory is introduced to describe the uncertainty. Based on that, the fuzzy mobile robot system is established. The virtual speed controller using backstepping method is designed. Then, a robust control method is proposed to guarantee the uniform boundedness and uniform ultimate boundedness of the controlled system. Furthermore, the balance optimization problem of the performance and cost of the controlled system is explored. By minimizing the performance index containing fuzzy numbers, the optimal control parameter is obtained. Compared with the linear quadratic regulator algorithm, which is the representative optimal robust controller, the proposed control method and optimization strategy based on fuzzy set theory are verified to be effective. The control accuracy is further improved., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

Successive approximation techniques are effective approaches to solve the Hamilton-Jacobi-Bellman (HJB)/Hamilton-Jacobi-Isaacs (HJI) equations in nonlinear H 2 and H ∞ optimal control problems (OCPs), but residual errors in the solving process may destroy its convergence property, and related numerical methods also pose computational burden and difficulties. In this paper, the HJB/HJI partial differential equations (PDEs) for infinite-horizon nonlinear H 2 and H ∞ OCPs are handled in a unified formulation, and a sparse successive approximation method is proposed. Taking advantage of successive approximation techniques, the nonlinear HJB/HJI PDEs are transformed into sequences of easily solvable linear PDEs, to which the solutions can be computed point-wise by handling simple initial value problems. Extra constraints are also incorporated in the solving process to guarantee the convergence under residual errors. The sparse grid based collocation points and basis functions are then employed to enable efficient numerical implementation. The performance of the proposed method is also numerically demonstrated in simulations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

Rehabilitation robotics has seen growing popularity in recent years due to its immense potential for improving the lives of people with disabilities. However, the complex, uncertain dynamics of these systems present significant control challenges, requiring advanced techniques. This paper introduces a novel adaptive control framework integrating modified function approximation (MFAT) and double-integral non-singular terminal sliding mode control (DINTSMC). The goal is to achieve precise tracking performance, high robustness, a fast response, a finite convergence time, reduced chattering, and effective handling of unknown system dynamics. A key feature is the incorporation of a higher-order sliding mode observer, eliminating the need for velocity feedback. This provides a new solution for overcoming the inherent variations and uncertainties in robot manipulators, enabling improved accuracy within fixed convergence times. The efficacy of the proposed approach was validated through simulations and experiments on an exoskeleton robot. The results successfully demonstrated the controller's effectiveness. Stability analysis using Lyapunov theory proved the closed-loop system's uniform ultimate boundedness. This contribution is expected to enable enhanced control for rehabilitation robots and improved patient outcomes.

This paper proposes a fixed-time tracking control for robot manipulators in the presence of parametric uncertainties and disturbances. An auxiliary function is first proposed for constructing a fixed-time sliding manifold. Benefited from this fixed-time sliding manifold, a singularity-free robust control is proposed to evade the effects of algebraic loop problem of the commonly-used sliding mode controls (SMC). The key advantages of the proposed approach are: (i) exact fixed-time stability featuring the convergence time does not relate to the initial conditions and is acquired in advance; (ii) the singularity and algebraic loop problems are eliminated completely; (iii) a simple and intuitive control structure is used for easy implementation of trajectory tracking control for uncertain robot manipulators with faster transient and higher steady-state precision. Simulations and experimental comparisons validate the improved tracking performance of the proposed approach., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

This article presents the structured H ∞ design and validation of two types of flight controller architectures: a passive fault-tolerant controller for the longitudinal motion and an active observer-based fault-tolerant controller for the lateral-directional motion. In the first, the controller follows the conventional Stability/Control Augmentation System (SCAS) structure, and its gains are obtained in continuous-time with the hinfstruct command by considering a set of elevator Loss-Of-Efficiency (LOE) faults. For the second, the conventional Luenberger observer-based controller structure is used, and the design aims to monitor the health of the aileron and rudder actuators in addition to provide active tolerance against LOE faults. Two different discrete-time designs are obtained for the latter, one focused on control performance optimization (using also the hinfstruct command), and the other on simultaneous control and observer performance optimization (using the systune command and under a slightly relaxed control performance constraint). For the two types of architectures, unmodeled dynamics are represented by uncertain bounded time delays modeled as pure delays or first-order Padé approximations. The resulting controllers are implemented on-board JAXA's research airplane MuPAL-α, and not only is their practicality demonstrated but also control performance is validated via Aircraft-In-the-Loop (AIL) testing under gust-free and realistic gusty conditions. This demonstration is at a Technological Readiness Level (TRL) of 7-8, resulting in a high-level of confidence in the validity of the proposed flight control structures., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

Detecting people in images and videos captured from an aerial platform in wooded areas for search and rescue operations is a current problem. Detection is difficult due to the relatively small dimensions of the person captured by the sensor in relation to the environment. The environment can generate occlusion, complicating the timely detection of people. There are currently numerous RGB image datasets available that are used for person detection tasks in urban and wooded areas and consider the general characteristics of a person, like size, shape, and height, without considering the occlusion of the object of interest. The present research work focuses on developing a thermal image dataset, which considers the occlusion situation to develop CNN convolutional deep learning models to perform detection tasks in real-time from an aerial perspective using altitude control in a quadcopter prototype. Extended models are proposed considering the occlusion of the person, in conjunction with a thermal sensor, which allows for highlighting the desired characteristics of the occluded person.

This paper proposes a reasonable, practical, and novel method for designing a robust controller for two degrees of freedom nano-electromechanical scanners based on the combination of quantitative feedback theory (QFT) and the Taguchi method. Although the main primary of this paper devotes to rotational control, an investigation of two-degree freedom (rotational/bending) is studied by employing the Taguchi method. A moveable main plate suspended by two nano-beams over a fixed substrate electrode is used to represent the scanner. The nanoscanner is thoroughly analyzed using the most comprehensive modeling design, considering the elastic, electrical, Casimir force and moment, and squeezes film damping. The nanoscanner's governing equations are initially derived by considering both rotation and deformation. In addition, because the size dependency of materials is significant in ultra-small structures, we developed the constitutive equations within the context of the modified couple stress theory to integrate the effect of scale dependency. Next, system uncertainties have been wholly addressed to achieve an accurate model. As a result, using robust control methods such as quantitative feedback theory to precisely control nano-scanners in the presence of uncertainties is inevitable. The quantitative feedback approach transforms the nonlinear plant into a family of linear uncertain plants in the first part. This is accomplished using a fixed-point theorem, after which appropriate disturbance rejection boundaries are discovered. In this problem, quantitative feedback controllers and checking the system's stability at any frequency and time are intended to solve the tracking problem and the disturbance rejection issue. Due to the uncertainty associated with the system model's complexity and accuracy, we employ a QFT controller to control the system. Moreover, because this system has only one input and two outputs, and changing the controller's gain is complicated, the Taguchi method has been employed to enhance better performance. Nonlinear simulations of the tracking issue are carried out, and the results demonstrate the effectiveness of the developed controllers and prefilters. The findings show that using the suggested approach effectively overcomes the challenges to robust control of a nonlinear rotational nanoscanner, and also the system achieves the best angle and deflection adjustment accuracy., Competing Interests: Declaration of competing interest The authors declare no conflict of interest in preparing this article, (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

Critical infrastructures such as cyber-physical energy systems (CPS-E) integrate information flow and physical operations that are vulnerable to natural and targeted failures. Safe, secure, and reliable operation and control of CPS-E is critical to ensure societal well-being and economic prosperity. Automated control is key for real-time operations and may be mathematically cast as a sequential decision-making problem under uncertainty. Emergence of data-driven techniques for decision making under uncertainty, such as reinforcement learning (RL), have led to promising advances for addressing sequential decision-making problems for risk-based robust CPS-E control. However, existing research challenges include understanding the applicability of RL methods across diverse CPS-E applications, addressing the effect of risk preferences across multiple RL methods, and development of open-source domain-aware simulation environments for RL experimentation within a CPS-E context. This article systematically analyzes the applicability of four types of RL methods (model-free, model-based, hybrid model-free and model-based, and hierarchical) for risk-based robust CPS-E control. Problem features and solution stability for the RL methods are also discussed. We demonstrate and compare the performance of multiple RL methods under different risk specifications (risk-averse, risk-neutral, and risk-seeking) through the development and application of an open-source simulation environment. Motivating numerical simulation examples include representative single-zone and multizone building control use cases. Finally, six key insights for future research and broader adoption of RL methods are identified, with specific emphasis on problem features, algorithmic explainability, and solution stability., (© 2023 Battelle Memorial Institute. Risk Analysis published by Wiley Periodicals LLC on behalf of Society for Risk Analysis.)

Background: Competitive sailing requires efforts pertinent to physiological limitations and coordination between different parts of the body. Such coordination depends on the torques applied by muscles to the joints., Objective: This study aims to simulate the motion and provide a control law for the joint torques in order to track the desired motion paths., Material and Methods: In this analytical study, an inverse dynamics based control is employed in order to simulate the motion by tracking the desired movement trajectories. First, the dynamics equations are obtained using Lagrange method for 5 degrees of freedom (5 DOF) model. In the following, a robust control scheme with inverse dynamics method based on the Proportional-Integral-Derivative (PID) approach is employed to track the desired joint angles obtained from the experiment., Results: The simulation results demonstrate the performance of the proposed control method. Low settling times are achieved for the entire joint, which is appropriate in comparison with the time period of each cycle (3.75 s). Also, the maximum torques required to be applied to the joints are in physiological range., Conclusion: This study provided an appropriate model for the analysis of human movement in rowing sport. The model can also be cited in terms of basic biological theories in addition to practical computational uses in biomechanical engineering. Accordingly, the generated control signals can help to improve the interactive body movements during paddling and in designing robotic arms for automatic rowing., Competing Interests: None, (Copyright: © Journal of Biomedical Physics and Engineering.)

In practice, many physical systems, including physiological ones, can be considered whose input can take only positive quantities. However, most of the conventional control methods do not support the positivity of the main input data to the system. Furthermore, the parameters of these systems, similar to other non-linear systems, are either not accurately identified or may change over time. Therefore, it is reasonable to design a controller that is robust against system uncertainties. A robust positive-input control method is proposed for the automatic treatment of targeted anti-angiogenic therapy implementing a recently published tumour growth model based on experiments conducted on mouse models. The backstepping (BS) approach is applied to design the positive input controller using sensory data of tumour volume as feedback. Unlike previous studies, the proposed controller only requires the measurement of tumour volume and does not require the measurement of inhibitor level. The exponential stability of the controlled system is proved mathematically using the Lyapunov theorem. As a result, the convergence rate of the tumour volume can be controlled, which is an important issue in cancer treatment. Moreover, the robustness of the system against parametric uncertainties is verified mathematically using the Lyapunov theorem. The real-time simulation results-based (OPAL-RT) and comparisons with previous studies confirm the theoretical findings and effectiveness of the proposed method., (© 2023 The Authors. IET Systems Biology published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology.)

This example-oriented article addresses the computation of regions of all robustly relatively stabilizing Proportional-Integral (PI) controllers under various robust stability margins α for Linear Time-Invariant (LTI) plants with unstructured multiplicative uncertainty, where the plant model with multiplicative uncertainty is built on the basis of the second-order plant with three uncertain parameters. The applied graphical method, adopted from the authors' previous work, is grounded in finding the contour that is linked to the pairs of P-I coefficients marginally fulfilling the condition of robust relative stability expressed using the H ∞ norm. The illustrative example in the current article emphasizes that the technique itself for plotting the boundary contour of robust relative stability needs to be combined with the precondition of the nominally stable feedback control system and with the line for which the integral parameter equals zero in order to get the final robust relative stability regions. The calculations of the robust relative stability regions for various robust stability margins α are followed by the demonstration of the control behavior for two selected controllers applied to a set of members from the family of plants., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

To ensure the accuracy and stability of intelligent-vehicle-trajectory tracking, a robust trajectory-tracking control strategy based on generalized Hamilton theory is proposed. Firstly, a dynamic Hamilton dissipative controller (DHDC) and trajectory-tracking Hamilton dissipative controller (TTHDC) were designed based on the established vehicle-dynamics control system and trajectory-tracking control system using the orthogonal decomposition method and control-switching method. Next, the feedback-dissipative Hamilton realizations of the two systems were obtained separately to ensure the convergence of the system. Secondly, based on the dissipative Hamilton system designed by TTHDC, a generalized Hamilton robust controller (GHRC) was designed. Finally, the co-simulation of Carsim and MATLAB/Simulink was used to verify the effectiveness of the three control algorithms. The simulation results show that DHDC and TTHDC can achieve self-stabilizing control of vehicles and enable certain control effects for the trajectory tracking of vehicles. The GHRC solves the problems of low tracking accuracy and poor stability of DHDC and TTHDC. Compared with the sliding mode controller (SMC) and linear quadratic regulator (LQR) controller, the GHRC can reduce the lateral error by 84.44% and the root mean square error (RMSE) by 83.92%, which effectively improves the accuracy and robustness of vehicle-trajectory tracking., Competing Interests: The authors declare no conflicts of interest.

The aim of this paper was to design a repeated drug administration strategy to reach and maintain the requested drug concentration in the body. Conservative designs require an exact knowledge of pharmacokinetic parameters, which is considered an unrealistic demand. The problem is usually resolved using the trial-and-error open-loop approach; yet, this can be considered insufficient due to the parametric uncertainties as the dosing strategy may induce an undesired behavior of the drug concentrations. Therefore, the presented approach is rather based on the paradigms of system and control theory. An algorithm was designed that computes the required doses to be administered based on the blood samples. Since repeated drug dosing is essentially a discrete time process, the entire design considers the discrete time domain. We have also presented the idea of applying this methodology for the stabilization of an unstable model, for instance, a model of tumor growth. The simulation experiments demonstrated that all variants of the proposed control algorithm can reach and maintain the desired drug concentration robustly, i.e., despite the presence of parametric uncertainties, in a way that is superior to that of the traditional open-loop approach. It was shown that the closed-loop control with the integral controller and stabilizing state feedback is robust against large parametric uncertainties.

This paper summarizes a robust controller based on the fact that, in the operation of a permanent magnet synchronous motor (PMSM), a number of disturbance factors naturally occur, among which both changes in internal parameters (e.g., stator resistance R s and combined inertia of rotor and load J ) and changes in load torque T L can be mentioned. In this way, the performance of the control system can be maintained over a relatively wide range of variation in the types of parameters mentioned above. It also presents the synthesis of robust control, the implementation in MATLAB/Simulink, and an improved version using a reinforcement learning twin-delayed deep deterministic policy gradient (RL-TD3) agent, working in tandem with the robust controller to achieve superior performance of the PMSM sensored control system. The comparison of the proposed control systems, in the case of sensored control versus the classical field oriented control (FOC) structure, based on classical PI-type controllers, is made both in terms of the usual response time and error speed ripple, but also in terms of the fractal dimension (DF) of the rotor speed signal, by verifying the hypothesis that the use of a more efficient control system results in a higher DF of the controlled variable. Starting from a basic structure of an ESO-type observer which, by its structure, allows the estimation of both the PMSM rotor speed and a term incorporating the disturbances on the system (from which, in this case, an estimate of the PMSM load torque can be extracted), four variants of observers are proposed, obtained by combining the use of a multiple neural network (NN) load torque observer and an RL-TD3 agent. The numerical simulations performed in MATLAB/Simulink validate the superior performance obtained by using properly trained RL-TD3 agents, both in the case of sensored and sensorless control.

This research examines new methods for stabilizing linear time-delay systems that are subject to denial-of-service (DoS) attacks. The study takes into account the different effects that a DoS attack can have on the system, specifically delay-independent and -dependent behaviour. The traditional proportional-integral-derivative (PID) acts on the error signal, which is the difference between the reference input and the measured output. The approach in this paper uses what we call the PID state feedback strategy, where the controller acts on the state signal. Our proposed strategy uses the Lyapunov-Krasovskii functional (LKF) to develop new linear matrix inequalities (LMIs). The study considers two scenarios where the time delay is either a continuous bounded function or a differentiable and time-varying function that falls within certain bounds. In both cases, new LMIs are derived to find the PID-like state feedback gains that will ensure robust stabilization. The findings are illustrated with numerical examples.

In this paper, we investigate the problem of a dynamic event-triggered robust controller design for flexible robotic arm systems with continuous-time phase-type semi-Markov jump process. In particular, the change in moment of inertia is first considered in the flexible robotic arm system, which is necessary for ensuring the security and stability control of special robots employed under special circumstances, such as surgical robots and assisted-living robots which have strict lightweight requirements. To handle this problem, a semi-Markov chain is conducted to model this process. Furthermore, the dynamic event-triggered scheme is used to solve the problem of limited bandwidth in the network transmission environment, while considering the impact of DoS attacks. With regard to the challenging circumstances and negative elements previously mentioned, the adequate criteria for the existence of the resilient H∞ controller are obtained using the Lyapunov function approach, and the controller gains, Lyapunov parameters and event-triggered parameters are co-designed. Finally, the effectiveness of the designed controller is demonstrated via numerical simulation using the LMI toolbox in MATLAB.

In this study, an approach with the position control scheme is proposed for the mobile manipulator robot, by applying the adaptive strategies with the backstepping control technique. In the proposed backstepping controller, the fixed problem of main control parameters has been improved by the adaptive self-updating process. In addition, this control method requires no prior knowledge of the control system, such as the unknown dynamics and disturbances. And, to relax uncertainties, an adaptive robust controller is also designed as a compensator for the main backstepping controller. Moreover, all adaptive updating algorithms are designed based on the Lyapunov theorem so that the proposed control system performances are guaranteed. The advantage of the improved control system will be evaluated via simulation results for the 3 - DOF MMR system., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

In this article, the problem of high precision motion control for motor servo systems with modeling uncertainties and unknown actuator backlash is addressed. The combination of synthesized adaptive laws and continuous nonlinear robust term handles parameter uncertainties and system disturbances. The adaptive technique updates the unknown parameters of actuator backlash in real time and the backlash inverse function eliminates the backlash effect. Meanwhile, the designed controller without knowing the range of the disturbance upper bound but automatically estimates through the adaptive law, which improves the engineering practicability. Finally, the theoretical analysis proves the perfect asymptotic stability of the presented controller even with unmodeled disturbances and unknown actuator backlash. Extensive comparative experiments reveal the superiority of the presented method., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 ISA. Published by Elsevier Ltd. All rights reserved.)

Tension control is critical for maintaining good product quality in most roll-to-roll (R2R) production systems. Previous work has primarily focused on improving the disturbance rejection performance of tension controllers. Here, a robust linear parameter-varying model predictive control (LPV-MPC) scheme is designed to enhance the tension tracking performance of a pilot R2R system for deposition of materials used in flexible thin film applications. The performance of a tension controller may degrade due to disturbances associated with model uncertainties and the slowly-changing dynamics in R2R systems. We introduce a method that separately treats these two sources of disturbance. The controller utilizes an incremental model to eliminate the errors caused by the mismatch between the nominal model and the actual system. A tube-based MPC formulation combined with scheduled parameters adequately updates models and corrects for the time-varying dynamics. Constraints on the rated motor torque are incorporated in the MPC to maintain the controller reliability and avoid machine failures. We illustrate the operation of our control algorithm through simulation of an actual R2R system. The controller outperforms the benchmarks in terms of fast transient response and offset-free tension tracking. It also demonstrates immunity from variations due to parametric uncertainties., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: One of the authors (Stephen R. Forrest) has an equity interest in one of the sponsors of this research (Universal Display Corporation). This apparent conflict is under management by the University of Michigan’s Office of Research. The University of Michigan has a royalty bearing license agreement with Universal Display Corp., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

Fractured formations lead to insufficient contact or loss of contact between the drill bit and rocks, which subsequently causes notable fluctuation in weight-on-bit due to flexible drill strings. This paper presents a robust integrated control design to suppress weight-on-bit fluctuation. First, a finite element drill-string longitudinal model is employed as the basis of control design, which has been verified using actual run data. The integrated controller contains a proportional-integral (PI) controller and a dynamic output feedback controller, dealing with the system's first-order and high-order dynamics. The dynamic output feedback controller only needs to focus on the system's high-order dynamics since the controller synthesis is based on the pre-designed PI controller. The controller decreases the flexible mode amplitude from disturbance to the output channel through H-infinity loop shaping, making the closed-loop system less flexible. The numerical results demonstrate that the developed approach can effectively suppress weight-on-bit fluctuation due to drill-string flexibility when drilling in fractured formations., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

Humans exhibit lateralization such that most individuals typically show a preference for using one arm over the other for a range of movement tasks. The computational aspects of movement control leading to these differences in skill are not yet understood. It has been hypothesized that the dominant and nondominant arms differ in terms of the use of predictive or impedance control mechanisms. However, previous studies present confounding factors that prevented clear conclusions: either the performances were compared across two different groups, or in a design in which asymmetrical transfer between limbs could take place. To address these concerns, we studied a reach adaptation task during which healthy volunteers performed movements with their right and left arms in random order. We performed two experiments. Experiment 1 (18 participants) focused on adaptation to the presence of a perturbing force field (FF) and experiment 2 (12 participants) focused on rapid adaptations in feedback responses. The randomization of the left and right arm led to simultaneous adaptation, allowing us to study lateralization in single individuals with symmetrical and minimal transfer between limbs. This design revealed that participants could adapt control of both arms, with both arms showing similar performance levels. The nondominant arm initially presented a slightly worst performance but reached similar levels of performance in late trials. We also observed that the nondominant arm showed a different control strategy compatible with robust control when adapting to the force field perturbation. EMG data showed that these differences in control were not caused by differences in co-contraction across the arms. Thus, instead of assuming differences in predictive or reactive control schemes, our data show that in the context of optimal control, both arms can adapt, and that the nondominant arm uses a more robust, model-free strategy likely to compensate for less accurate internal representations of movement dynamics., Competing Interests: The authors declare no competing financial interests., (Copyright © 2023 Córdova Bulens et al.)

Iterative learning model predictive control (ILMPC) has been considered as potential control strategy for batch processes. ILMPC can converge to the desired reference trajectory with high precision along batches and ensure system stability within batches. However, as a model-based control method, the control performance of the ILMPC algorithm deteriorates when exists model parameter uncertainty. Therefore, guaranteeing system tracking performance in the case of model parameter uncertainty is a challenging task in the framework designing of ILMPC method. To this end, we develop a two-stage robust ILMPC strategy for batch processes, which integrates the robust iterative learning control (ILC) in the domain of batch-axis and robust model predictive control (MPC) in the domain of time-axis into one comprehensive control scheme. The integrated control law of the developed two-stage robust ILMPC algorithm is obtained by solving two convex optimization problems. As a result, the developed control method obtains faster convergence speed and better tracking performance in the case of model parameter uncertainty. Moreover, the convergence analysis of the system is presented. Finally, comparative simulations are provided to verify the superiority of the developed control algorithm., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

Objectives: Chronic pain is primarily treated with pharmaceuticals, but the effects remain unsatisfactory. A promising alternative therapy is peripheral nerve stimulation (PNS), but it has been associated with suboptimal efficacy because its modulation mechanisms are not clear and the current therapies are primarily open loop (ie, manually adjusting the stimulation parameters). In this study, we developed a proof-of-concept computational modeling as the first step toward implementing closed-loop PNS in future biological studies. When developing new pain therapies, a useful pain biomarker is the wide-dynamic-range (WDR) neuron activity in the dorsal horn. In healthy animals, the WDR neuron activity occurs in a stereotyped manner; however, this response profile can vary widely after nerve injury to create a chronic pain condition. We hypothesized that if injury-induced changes of neuronal response can be normalized to resemble those of a healthy condition, the pathological aspects of pain may be treated while maintaining protective physiological nociception., Materials and Methods: Using an in vivo electrophysiology data set of WDR neuron recordings obtained in nerve-injured rats and naïve rats, we constructed sets of linear phenomenologic models of WDR firing rate during windup stimulation for both conditions. Then, we applied robust control systems techniques to identify a closed-loop PNS controller, which can drive the dynamics of WDR neuron response in neuropathic pain model into ranges associated with normal physiological pain., Results: The sets of identified linear models can accurately predict, in silico, nonlinear neural responses to electrical stimulation of the peripheral nerve. In addition, we showed that continuous closed-loop control of PNS can be used to normalize WDR neuron firing responses in three injured cases., Conclusions: In this proof-of-concept study, we show how tractable, linear mathematical models of pain-related neurotransmission can be used to inform the development of closed-loop PNS. This new application of robust control to neurotechnology may also be expanded and applied across other neuromodulation applications., (Copyright © 2022 International Neuromodulation Society. Published by Elsevier Inc. All rights reserved.)

In this study, a novel framework for the flight control of a morphing unmanned aerial vehicle (UAV) based on linear parameter-varying (LPV) methods is proposed. A high-fidelity nonlinear model and LPV model of an asymmetric variable-span morphing UAV were obtained using the NASA generic transport model. The left and right wing span variation ratios were decomposed into symmetric and asymmetric morphing parameters, which were then used as the scheduling parameter and the control input, respectively. LPV-based control augmentation systems were designed to track the normal acceleration, angle of sideslip, and roll rate commands. The span morphing strategy was investigated considering the effects of morphing on various factors to aid the intended maneuver. Autopilots were designed using LPV methods to track commands for airspeed, altitude, angle of sideslip, and roll angle. A nonlinear guidance law was coupled with the autopilots for three-dimensional trajectory tracking. A numerical simulation was performed to demonstrate the effectiveness of the proposed scheme.

There exist the uncertainties and the inequality constraints in permanent magnet synchronous motor (PMSM) system. In order to meet the safety control requirements in industrial applications, the state transformation is used to meet the inequality constraints for limiting the outputs within desired bounds. Then, fuzzy set theory, which is different from fuzzy logic, is used to describe uncertainty, and the fuzzy PMSM dynamical model is established. Based on that, a robust control with high-order term is proposed to compensate for the time-varying uncertainty. Furthermore, for improving the system performance and decreasing the control cost, the Stackelberg game is introduced into the optimization scheme design, in which the leader plays a more important role than follower. These characteristic corresponds to the influence of the two tunable control parameters on the system. Thus, the optimal parameters are obtained by the rules of Stackelberg game. Finally, experimental results show the effectiveness of the above theories., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

Recent advances in the artificial pancreas system provide an emerging treatment option for type 1 diabetes. The performance of the blood glucose regulation directly relies on the accuracy of the glucose-insulin modeling. Sorenson model involves the behavior of different organs and offers precise representation. However, the high complexity of such a model makes the controller design procedure a hard task. Therefore, the high-order nonlinear Sorensen model as a popular high-fidelity physiological model is opted in this paper to analyze the glucose-insulin interactions in great detail, and a new robust nonlinear approach to regulate the blood glucose concentration (BGC) in Type-I diabetic patients is proposed. Inspiring the backstepping technique, for designing an acceptable controller, the model is divided into three main subsystems such that in each subsystem, the virtual control input laws are obtained using both Lyapunov stability and input-to-state theorems. Since the measurement of the parameters in the glucose-insulin system is not accurate, parametric uncertainties are defined in the investigated model. Furthermore, owing to the fact that the only measurable state variable is blood glucose, the estimation of inaccessible state variables is an important issue that is properly considered by the unscented Kalman filter (UKF) estimator. The suggested approach is compared to H ∞ , robust H ∞ , and linear parameter-varying control approaches. The comparison results on 500 simulated patients imply a remarkable superiority of the proposed controller approach to the compared methods in terms of the BGC tracking and the algorithm robustness in the presence of food intake disturbance patterns., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. All rights reserved.)

This paper focuses on the three-body confrontation problem of a Target-Defender team against an Attacker possessing greater maneuverability. Based on the input-to-state stability approach, a cooperative robust line-of-sight guidance law is proposed for the Target-Defender team to ensure that the Attacker has a certain tolerance range on the unavailable guidance information. In addition, the optimal evasion strategy is developed for the Target to maximize the terminal distance between the Target and Attacker. A key feature of the proposed guidance law is that the interception of the Attacker can be guaranteed as long as the uncertainty generated by the Attacker's maneuver is bounded. Furthermore, by using the optimal control technique, the control input of the Target-Defender team is minimized. Simulation examples are given to illustrate the effectiveness of the proposed guidance law., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

Starting from the general topology and the main elements that connect a microgrid represented by a DC power source to the main grid, this article presents the performance of the control system of a DC-AC converter. The main elements of this topology are the voltage source inverter represented by a DC-AC converter and the network filters. The active Insulated Gate Bipolar Transistor (IGBT) or Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) elements of the DC-AC converter are controlled by robust linear or nonlinear Port Controlled Hamiltonian (PCH) controllers. The outputs of these controllers are modulation indices which are inputs to a Pulse-Width Modulation (PWM) system that provides the switching signals for the active elements of the DC-AC converter. The purpose of the DC-AC converter control system is to maintain u d and u q voltages to the prescribed reference values where there is a variation of the three-phase load, which may be of balanced/unbalanced or nonlinear type. The controllers are classic PI, robust or nonlinear PCH, and their performance is improved by the use of a properly trained Reinforcement Learning-Twin Delayed Deep Deterministic Policy Gradient (RL-TD3) agent. The performance of the DC-AC converter control systems is compared using performance indices such as steady-state error, error ripple and Total Harmonic Distortion (THD) current value. Numerical simulations are performed in Matlab/Simulink and conclude the superior performance of the nonlinear PCH controller and the improvement of the performance of each controller presented by using an RL-TD3 agent, which provides correction signals to improve the performance of the DC-AC converter control systems when it is properly trained.

In this paper, the side effects of drug therapy in the process of cancer treatment are reduced by designing two optimal non-linear controllers. The related gains of the designed controllers are optimised using genetic algorithm and simultaneously are adapted by employing the Fuzzy scheduling method. The cancer dynamic model is extracted with five differential equations, including normal cells, endothelial cells, cancer cells, and the amount of two chemotherapy and anti-angiogenic drugs left in the body as the engaged state variables, while double drug injection is considered as the corresponding controlling signals of the mentioned state space. This treatment aims to reduce the tumour cells by providing a timely schedule for drug dosage. In chemotherapy, not only the cancer cells are killed but also other healthy cells will be destroyed, so the rate of drug injection is highly significant. It is shown that the simultaneous application of chemotherapy and anti-angiogenic therapy is more efficient than single chemotherapy. Two different non-linear controllers are employed and their performances are compared. Simulation results and comparison studies show that not only adding the anti-angiogenic reduce the side effects of chemotherapy but also the proposed robust controller of sliding mode provides a faster and stronger treatment in the presence of patient parametric uncertainties in an optimal way. As a result of the proposed closed-loop drug treatment, the tumour cells rapidly decrease to zero, while the normal cells remain healthy simultaneously. Also, the injection rate of the chemotherapy drug is very low after a short time and converges to zero., (© 2022 The Authors. IET Systems Biology published by John Wiley & Sons Ltd on behalf of The Institution of Engineering and Technology.)

This article deals with the calculation of all robustly relatively stabilizing (or robustly stabilizing as a special case) Proportional-Integral-Derivative (PID) controllers for Linear Time-Invariant (LTI) systems with unstructured uncertainty. The presented method is based on plotting the envelope that corresponds to the trios of P-I-D parameters marginally complying with given robust stability or robust relative stability condition formulated by means of the H ∞ norm. Thus, this approach enables obtaining the region of robustly stabilizing or robustly relatively stabilizing controllers in a P-I-D space. The applicability of the technique is demonstrated in the illustrative examples, in which the regions of robustly stabilizing and robustly relatively stabilizing PID controllers are obtained for a controlled plant model with unstructured multiplicative uncertainty and unstructured additive uncertainty. Moreover, the method is also verified on the real laboratory model of a hot-air tunnel, for which two representative controllers from the robust relative stability region are selected and implemented., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

This paper introduces a nonlinearity compensation based robust tracking controller for hypersonic flight vehicles. The controller focuses on robust control design with respect to the nonminimum phase feature and system uncertainties for the control-oriented model. Firstly, following the principle of decomposing the complex control problem into two simpler problems, the original robust tracking problem for nonlinear nonminimum phase hypersonic flight vehicles is decomposed into a simpler robust tracking problem for a linear nonminimum phase system with disturbances and a stabilization problem for a nonlinear system without disturbances. After the problem decomposition, a proportional-integral tracking controller and a feedback linearization controller are designed for the linear system and the nonlinear system, respectively. Then, the addition of the two designed controllers gives the final controller. By compensating for the system nonlinearity using the secondary system and its controller, the proposed control method can satisfy the robust tracking control requirements for nonlinear nonminimum phase hypersonic flight vehicles. The simulation results show, compared with a feedback linearization control method and a composite neural learning control method, the proposed method has superior tracking accuracy and robustness against system uncertainties and external disturbances., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

A decentralized PI/PID controller based on the frequency domain analysis for two input two output (TITO) coupled tank systems is exploited in this paper. The fundamentals of the gain margin and phase margin are used to design the proposed PI/PID controller. The basic objective is to keep the tank at the predetermined level. To satisfy the design specifications, the control algorithm is implemented for decoupled subsystems by employing a decoupler. First-order plus dead time (FOPDT) models are obtained for the decoupled subsystems using the model-reduction technique. In addition, the control law is realized by considering the frequency domain analysis. Further, the robustness of the controller is verified by considering multiplicative input and output uncertainties. The proposed method is briefly contrasted with existing techniques. It is envisaged that the proposed control algorithm exhibits better servo and regulatory responses compared to the existing techniques.

This paper deals with the L 2 gain stability problem of a class of uncertain fractional switched reset control systems. The stability of the underlying switched linear system with uncertainties and bounded exogenous disturbance is verified via the Lyapunov stability theorem and employing sufficient linear matrix inequalities (LMIs). In this work, the problem of switching between several stabilizing controllers is taken into account, which, all of them are capable of stabilizing the corresponding linear system. Meanwhile, at reset times instants that occur in the jump set, the controller states suddenly jump to the new value based on a proper reset map matrix. Simulation results show that the proposed fractional switched reset controller can attain good robustness performance., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

A stroke is a common disease that can easily lead to lower limb motor dysfunction in the elderly. Stroke survivors can effectively train muscle strength through leg flexion and extension training. However, available lower limb rehabilitation robots ignore the knee soft tissue protection of the elderly in training. This paper proposes a human-robot cooperative lower limb active strength training based on a robust admittance control strategy. The stiffness change law of the admittance model is designed based on the biomechanics of knee joints, and it can guide the user to make force correctly and reduce the stress on the joint soft tissue. The controller will adjust the model stiffness in real-time according to the knee joint angle and then indirectly control the exertion force of users. This control strategy not only can avoid excessive compressive force on the joint soft tissue but also can enhance the stimulation of quadriceps femoris muscles. Moreover, a dual input robust control is proposed to improve the tracking performance under the disturbance caused by model uncertainty, interaction force and external noise. Experiments about the controller performance and the training feasibility were conducted with eight stroke survivors. Results show that the designed controller can effectively influence the interaction force; it can reduce the possibility of joint soft tissue injury. The robot also has a good tracking performance under disturbances. This control strategy also can enhance the stimulation of quadriceps femoris muscles, which is proved by measuring the muscle electrical signal and interaction force. Human-robot cooperative strength training is a feasible method for training lower limb muscles with the knee soft tissue protection mechanism., Competing Interests: The authors declare no conflict of interest.

This paper presents various control system design techniques for temperature control of Magnetic Fluid hyperthermia. The purpose of this research is to design a cost-effective, efficient, and practically implementable temperature controller for Magnetic Fluid hyperthermia, which is presently under research as a substitute to the radiation and chemotherapy treatment of cancer. The principle of this phenomenon centers on the greater sensitivity of tumor cells to changes in temperature in comparison to healthy cells. Once the nanoparticles reach the desired tissue, it can then be placed in a varying magnetic field to dissipate the heat locally by raising the temperature to 45 °C in order to kill cancerous cells. One of the challenging tasks is to maintain the temperature strictly at desired point i.e., 45 °C. Temperature controller for magnetic fluid hyperthermia provides the tight control of temperature in order to avoid folding of proteins and save the tissues around the cancerous tissue from getting destroyed. In contrast with most of the existing research on this topic, which are based on linear control strategies or their improved versions, the novelty of this research lies in applying nonlinear control technique like Sliding Mode Control (SMC) to accurately control the temperature at desired value. A comparison of the control techniques is presented in this paper, based on reliability, robustness, precision and the ability of the controller to handle the non-linearities that are faced during the treatment of cancer. SMC showed promising results in terms of settling time and rise time. Steady state error was also reduced to zero using this technique.

The design of robust state- and output-feedback control for uncertain discrete-time systems with physical magnitude and rate constraints on their actuator dynamics was addressed. Unlike the traditional methods such as anti-windup (AW) methods, nested ellipsoids, model predictive controllers (MPCs) and integral quadratic constraints(IQCs) formulated by sector bounded inequalities, this paper uses a transformation of the system dynamics to a form which considers control signal and its rate as controlled outputs and using discrete-time ℓ ∞ induced (peak-to-peak) norm from disturbance inputs to these outputs. To cope with the magnitude and rate bound non-linearities together, the induced ℓ ∞ norm from disturbance input to the outputs involving control signal and its rate is utilised. On the other hand, discrete-time(DT) induced ℓ 2 norm from disturbance input to the main controlled output is used to mitigate the effects of disturbances. We can tackle this ambitious non-linear control problem in the domain of linear convex multi-objective optimal control problem, which can be solved by effective semi-definite optimisation methods by using the proposed transformation and handling the control constraints in terms of worst case peak-to-peak gain of the system. Extended Linear Matrix Inequalities (LMIs) and full block S-procedure based design conditions developed over Linear Fractional Representation(LFR) framework allow the user to obtain robust state- and output-feedback control solutions with reduced conservatism. For the first time, this paper introduces an extended LMI based robust output-feedback control design for magnitude and rate bounded (MRB) systems, using full block S-procedure. We demonstrate the performance of the proposed controller through several simulations over benchmark examples covering systems having multi-variable structures and uncertainties. Our study also involves comparison results with a recently introduced technique based on multi-stage AW technique. The simulation results show that the proposed method of this paper is much effective and less conservative compared to the recent AW method provided in the literature., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

In this study, a robust control technique is investigated for the reference tracking of uncertain time-delayed systems in the existence of the actuator saturation. Due to emerging of some control complexities, as well as the input limitations, time-varying delay, uncertainty, and external disturbance, such a tracking goal would be realized through suitable design of the composite nonlinear feedback (CNF) controller. Thus, considering the mentioned limitations, a Lyapunov-based procedure is used to determine the control law. Then, the parameters of the CNF input are derived by using the solution of a linear matrix inequality (LMI) problem. The planned tracking idea is numerically implemented in two uncertain control systems. Some performance characteristics (i.e., the tracking error, boundedness, and transient responses) are compared with similar ones. Accordingly, the simulations illustrate the efficiency of the suggested control procedure over the existing CNF approaches., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 ISA. Published by Elsevier Ltd. All rights reserved.)

We propose a mandatory invasive mechanical ventilator prototype for severe COVID-19 patients with volume and pressure control operation modes. This system comprises basic pneumatic elements and sensors. Its performance is similar to commercial equipment, and it presents robustness to external disturbances and parametric uncertainties. To develop a control strategy, we propose a mathematical model with a variable structure that incorporates the dead zone phenomenon of the proportional valve, and considers external disturbances and parametric uncertainties. Based on this model, we propose a global control strategy that is based on pressure and flow regulation controllers, which use the active disturbances rejection control structure (ADRC). In this strategy, we propose robust state observers to estimate disturbances and the signals necessary for implementing the controllers. We illustrate the performance of the prototype and the control strategy through numerical simulations and experiments. We also compare its performance with PID controllers. These results corroborate its effectiveness and the possibility of its application in invasive mechanical ventilators with a simple structure, which can significantly help critical care of COVID-19 inpatients., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier Ltd.)