Search

Robotics in medicine is associated with precision, accuracy, and replicability. Several robotic systems are used in spine surgery. They are all considered shared-control systems, providing "steady-hand" manipulation instruments. Although numerous studies have testified to the benefits of robotic instrumentations, they must address their true accuracy. Our study used the Mazor system under several situations and compared the spatial accuracy of the pedicle screw (PS) insertion and its planned trajectory. We used two cadaveric specimens with intact spinal structures from C7 to S1. PS planning was performed using the two registration methods (preopCT/C-arm or CT-to-fluoroscopy registration). After planning, the implant spatial orientation was defined based on six anatomic parameters using axial and sagittal CT images. Two surgical open and percutaneous access were used to insert the PS. After that, another CT acquisition was taken. Accuracy was classified into optimal, inaccurate and unacceptable according to the degree of screw deviation from its planning using the same spatial orientation method. Based on the type of spatial deviation, we also classified the PS trajectory into 16 pattern errors. Seven (19%) out of 37 implanted screws were considered unacceptable (deviation distances > 2.0 mm or angulation > 5°), and 14 (38%) were inaccurate (> 0.5 mm and ≤ 2.0 mm or > 2.5° and ≤ 5°). CT-to-fluoroscopy registration was superior to preopCT/C-arm (average deviation in 0.9 mm vs. 1.7 mm, respectively, p < 0.003), and percutaneous was slightly better than open but did not reach significance (1.3 mm vs. 1.7 mm, respectively). Regarding pattern error, the tendency was to have more axial than sagittal shifts. Using a quantitative method to categorize the screw 3D position, only 10.8% of the screws were considered unacceptable. However, with a more rigorous concept of inaccuracy, almost half were non-optimal. We also identified that, unlike some previous results, the O-arm registration delivers more accurate implants than the preopCT/C-arm method., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Minimally invasive endovascular embolization is used to treat a wide range of diseases in neurology, oncology, and trauma where the vascular morphologies and corresponding hemodynamics vary greatly. Current techniques based on metallic coils, flow diverters, liquid embolics, and suspended microspheres are limited in their ability to address a wide variety of vasculature and can be plagued by complications including distal migration, compaction, and inappropriate vascular remodeling. Further, these endovascular devices currently offer limited therapeutic functions beyond flow control such as drug delivery. Herein, a novel in situ microcatheter-based photomodulated extrusion approach capable of dynamically tuning the physical and morphological properties of injectable hydrogels, optimizing for local hemodynamic environment and vascular morphology, is proposed and demonstrated. A shear thinning and photoactivated poly(ethylene glycol diacrylate)-nanosilicate (PEGDA-nSi) hydrogel is used to demonstrate multiple extrusion modes which are controlled by photokinetics and device configurations. Real-time photomodulation of injected hydrogel viscosity and modulus is successfully used for embolization in various vasculatures, including high-flow large vessels and arterial-to-arterial capillary shunts. Furthermore, a generalizable therapeutic delivery platform is proposed by demonstrating a core-shell structured extrusion encapsulating doxorubicin to achieve a more sustained release compared to unencapsulated payload., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

Background: The endovascular treatment of cerebral aneurysms has become widespread but may still be limited by recurrence rates or complications. The discovery of novel embolic strategies may help mitigate these concerns. Methods: We formulated a Photosensitive Hydrogel Polymer (PHP) embolic agent which is low-viscosity, shear-thinning, and radio-opaque. After the filling of an aneurysm with PHP with balloon assistance, we utilized photopolymerization to induce solidification. Different methods of light delivery for photopolymerization were assessed in silicone models of aneurysms and in four acute animal trials with venous anastomosis aneurysms in pigs. Then, balloon-assisted embolization with PHP and photopolymerization was performed in three aneurysms in pigs with a one-month follow-up. Filling volume, recurrence rates, and complications were recorded. Results: The PHP was found to be suitable for the intravascular delivery and treatment of cerebral aneurysms. It was found that light delivery through the balloon catheter, as opposed to light delivery through the injection microcatheter, led to higher rates of filling in the 3D model and acute animal model for cerebral aneurysms. Using the balloon-assisted embolization and light delivery strategy, three wide-necked aneurysms were treated without complication. One-month follow-up showed no recurrence or neck remnants. Conclusions: We demonstrated a novel method of balloon-assisted photosensitive hydrogel polymer embolization and photopolymerization, leading to complete aneurysm filling with no recurrence at 1 month in three wide-necked aneurysms in pigs. This promising methodology will be investigated further with longer-term comparative animal trials.

Background: Mastoidectomy involves drilling the temporal bone while avoiding the facial nerve, semicircular canals, sigmoid sinus, and tegmen. Optical topographic imaging (OTI) is a novel registration technique that allows rapid registration with minimal navigational error. To date, no studies have examined the use of OTI in skull-base procedures., Methods: In this cadaveric study, 8 mastoidectomies were performed in 2 groups-4 free-hand (FH) and 4 OTI-assisted mastoidectomies. Registration accuracy for OTI navigation was quantified with root mean square (RMS) and target registration error (TRE). Procedural time, percent of mastoid resected, and the proximity of the mastoidectomy cavity to critical structures were determined., Results: The average RMS and TRE associated with OTI-based registration were 1.44 mm (±0.83 mm) and 2.17 mm (±0.89 mm), respectively. The volume removed, expressed as a percentage of the total mastoid volume, was 37.5% (±10.2%) versus 31.2% (±2.3%), P = 0.31, for FH and OTI-assisted mastoidectomy. There were no statistically significant differences between FH and OTI-assisted mastoidectomies with respect to proximity to critical structures or procedural time., Conclusions: This work is the first examining the application of OTI neuronavigation in lateral skull-base procedures. This pilot study revealed the RMS and TRE for OTI-based navigation in the lateral skull base are 1.44 mm (±0.83 mm) and 2.17 mm (±0.89 mm), respectively. This pilot study demonstrates that an OTI-based system is sufficiently accurate and may address barriers to widespread adoption of navigation for lateral skull-base procedures., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Hereditary hemorrhagic telangiectasia (HHT) is an autosomal dominant disorder that causes vascular malformations throughout the body. The most prevalent and accessible of these lesions are found throughout the skin and mucosa, and often rupture causing bleeding and anemia. A recent increase in potential HHT treatments have created a demand for quantitative metrics that can objectively measure the efficacy of new and developing treatments. We employ optical coherence tomography (OCT)-a high resolution, non-invasive imaging modality in a novel pipeline to image and quantitatively characterize dermal HHT lesion behavior over time or throughout the course of treatment. This study is aimed at detecting detailed morphological changes of dermal HHT lesions to understand the underlying dynamic processes of the disease. We present refined metrics tailored for HHT, developed from a pilot study using 3 HHT patients and 6 lesions over the course of multiple imaging dates, totalling to 26 lesion images. Preliminary results from these lesions are presented in this paper alongside representative OCT images. This study provides a new objective method to analyse and understand HHT lesions using a minimally invasive, accessible, cost-effective, and efficient imaging modality with quantitative metrics describing morphology and blood flow., (© 2022. The Author(s).)

Background: Ultra high-frequency ultrasound (uHFUS) is a recently developed diagnostic technology. Despite its potential usefulness, no study has assessed its advantage in diagnosis and evaluation of hair disorders in comparison with other diagnostic methods., Objectives: To assess the practicability of uHFUS in diagnosing hair disorders and propose a diagnostic methodology., Methods: Ultrasonographic images of scalp and forehead from patients with hair disorders (n = 103) and healthy controls (n = 40) were obtained by uHFUS and analyzed by both descriptive and numerical parameters. Furthermore, the data were compared with trichoscopic and histopathological findings., Results: The pattern of inflammation and fibrosis, hair cycle abnormality, and the findings in subcutis were detected by uHFUS. Significant differences were noted in the numerical parameters associated with the number of hair shafts and follicles, hair diameters and their diversity, and dermal echogenicity in both cicatricial and non-cicatricial hair disorders. Findings in uHFUS were associated with those observed in trichoscopy and scalp biopsy but uHFUS was able to detect pathological findings associated with hair cycle, inflammation, fibrosis, and subcutaneous abnormalities, which are hardly assessable by trichoscopy., Conclusion: The findings of this study highlighted usefulness of uHFUS in diagnosing hair disorders, while overcoming the weaknesses and limitations of other diagnostic tools., Competing Interests: Declaration of Competing Interest M.K. is a scientific advisor for Janssen Pharmaceutical K.K. MO is a scientific advisor for Eli Lilly Japan, Pfizer Japan Inc., Janssen Pharmaceutical K.K., Taisho Pharmaceutical Co., and RHOTO Pharmaceutical Co. and receiving research grants not related to this study from Shiseido Co. and Sun Pharma Japan Ltd. FS. F is a consultant and a scientific advisor for VisualSonics. He is receiving a research grant as P.I. from VisualSonics. The remaining authors state no conflict of interest., (Copyright © 2021 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.)

Significance: Imaging of the spinal cord is challenging due to the surrounding bony anatomy, physiologic motion, and the small diameter of the spinal cord. This precludes the use of non-invasive imaging techniques in assessing structural changes related to trauma and evaluating residual function., Aim: The purpose of our research was to apply endovascular technology and techniques and construct a preclinical animal model of intrathecal spinal cord imaging using optical coherence tomography (OCT)., Approach: Five animals (2 Yorkshire Swine and 3 New Zealand Rabbits) were utilized. Intrathecal access was gained using a 16-guage Tuohy, and an OCT catheter was advanced under roadmap technique into the cervical canal. The OCT catheter has a motorized pullback, and a total length of 54 mm of the spinal canal is imaged., Results: Image acquisition was successful for all animals. There were no instances of difficult catheter navigation, enabling OCT imaging rostrally to C2. The thecal sac provided excellent thoroughfare for the OCT catheter. The clear cerebrospinal fluid also provided an excellent medium for image acquisition, with no detectable artifact from the contents of the cerebrospinal fluid. The anatomical space of the spinal canal could be readily appreciated including: dural lining of the thecal sac, epidural veins, pial lining of the spinal cord, arachnoid bands, dentate ligaments, and nerve rootlets/roots., Conclusion: Minimally invasive intrathecal imaging using endovascular OCT was feasible in this preclinical animal study. The repurposing of an endovascular device for spinal imaging comes with limitations, and a spine-specific device is necessary.

The diagnosis of cutaneous T-cell lymphomas (CTCL) is frequently delayed by a median of three years and requires the clinical evaluation of an experienced dermatologist and a confirmatory skin biopsy. Dermoscopy and high-frequency ultrasound (HFUS) represent two non-invasive diagnostic tools. While dermoscopy is inexpensive and widely used for the diagnosis of melanoma and non-melanoma skin cancers, HFUS of skin lymphomas represents a novel diagnostic approach that is not yet implemented in the routine dermatologic practice. The aim of our study was to prospectively assess skin lesions of patients with either CTCL patches or plaques with dermoscopy and HFUS and to compare the findings with atopic dermatitis (AD) and psoriasis. Thirteen patients with an established diagnosis of CTCL, psoriasis, or AD were studied: Dermoscopy features including spermatozoa-like structures and the presence of white scales could assist in differentiating between early-stage CTCL and AD. HFUS measurements of the skin thickness indicated increased epidermal-, thickness in CTCL, and psoriasis compared with AD. Our results support the use of dermoscopy as a useful tool to diagnose CTCL. HFUS could augment the dermatologic assessment, but further studies will be needed to define standardized parameters.

Objective: Although the majority of patients with cerebral venous sinus thrombosis (CVST) will improve with anticoagulation therapy, a portion of patients will either present in a comatose state or continue to deteriorate clinically despite early anticoagulation. In these cases, along with treating the underlying thrombophilia, timely thrombolysis may be beneficial. Repurposed arterial thrombectomy devices may not perform as expected in the cerebral venous sinus, and there are currently no preclinical endovascular thrombectomy (EVT) models for CVST. Contrary to arterial stroke research, preclinical models utilized to test various endovascular techniques and devices are lacking. The purpose of this research was to develop a reliable preclinical animal model for the testing of endovascular strategies to treat CVST., Methods: Five consecutive male Yorkshire swine weighing 45 kg were utilized. Thrombosis of the superior sagittal sinus was induced with a bovine thrombin injection via a microcatheter under distal balloon occlusion for 15 minutes. Combined arterial injections and superselective sinus injections confirmed the extent of thrombosis. EVT was subsequently performed using a second-generation stent retriever, followed by intravascular optical coherence tomography (OCT) imaging to assess the luminal environment after thrombectomy., Results: Thrombosis of the superior sagittal sinus, EVT, and subsequent OCT imaging were technically successful in 4 of the 5 swine. Recanalization of the sinus with a second-generation stent retriever was successful after one attempt in 3 of 4 swine (75%), and 1 swine required two attempts. OCT imaging after thrombectomy revealed regions of residual sinus luminal thrombus despite complete angiographic recanalization. Thrombosed bridging cortical veins were also observed before draining into the sinus, along with patent cortical veins., Conclusions: The authors describe a preclinical model to assess endovascular techniques and devices for the treatment of CVST. Repurposed devices from arterial stroke may not perform as expected, given the unique features of venous sinus thrombosis. Residual bridging cortical vein thrombus and residual sinus thrombus, visualized on intravascular OCT, may be present despite complete sinus recanalization on angiography, and this may be the etiology of the poor clinical outcome despite technical success. In the setting of bridging cortical vein thrombus after successful sinus thrombectomy, direct chemical thrombolysis may be warranted to dissolve the remaining clot. This model may be helpful in developing and testing a new generation of devices designed specifically for CVST treatment.

Purpose: Carotid artery stenting (CAS) has been proven to decrease the risk of stroke in symptomatic patients with moderate/high-grade carotid stenosis; however, there is an increased periprocedural risk of stroke with CAS compared to carotid endarterectomy. The goal of this article is to report the utilization of endovascular optical coherence tomography (OCT) during CAS to aid in the identification of stent malapposition, plaque prolapse, and adjacent residual thrombus that could cause periprocedural stroke., Methods: Approval was obtained for endovascular OCT imaging in patients undergoing CAS. Images were obtained before and after stenting. Images were acquired with proximal balloon occlusion and saline to clear luminal blood during acquisition., Results: A total of seven patients provided informed consent for imaging. There were no complications during image acquisition or the stenting procedure. Optical coherence tomography imaging revealed free intraluminal red thrombi, fibrous cap dissections, and thin cap fibroatheromas with underlying ulcerative plaques. Plaque herniation through stents was also demonstrated along with thrombus. Poor stent apposition was clearly visible., Conclusion: Optical coherence tomography image acquisition was found to be safe, effective, and to provide valuable information about plaque morphology and stent-vessel interactions. The role of perioperative anticoagulation after stenting should be re-evaluated given the new findings. A study comparing CAS with and without OCT with a clinical primary outcome such as ipsilateral stroke could help determine if OCT is an innovative tool to guide stenting and antithrombotic management.

The erratum corrects a misspelled author surname.

Laser energy sealing systems have attracted much attention over the past decade given the general shift in surgical paradigm toward less invasive surgical approaches. Given this, it is paramount to have an objective method with which the quality of energy seals can be evaluated. Current methodologies used for this purpose can be problematic in the evaluation of small vessel seals. A methodology employing Doppler optical coherence tomography (DOCT) for the evaluation of energy seals is introduced. Avian chorioallantoic membrane vessels were subjected to thulium laser irradiation and were then scanned via OCT. Outcomes were classified based on several markers, predominantly the presence or absence of flow postirradiation. Vessel diameter and general morphology were also taken into consideration. Vessels were classified into four groups: seal (29%), rupture (30%), partial seal (19%), and unaffected (22%). All vessels were also evaluated visually by a trained neurovascular surgeon, and these visually classified outcomes were compared with DOCT evaluated outcomes. It was found that whether the vessel was considered sealed or not sealed was dependent on the evaluation method (p  =  0.01) where visual classification resulted in 18% more seals than DOCT classification. Further, the specificity of visual classification was found to be strongly dependent on the number of partial seals (p  <  0.0001). DOCT has shown to be an indispensable method for the evaluation of energy seals not only solely due to its high velocity resolution but also due to valuable microscopic morphological insight regarding the biological mechanisms responsible for energy sealing.

Objective: Although studies have shown that some degree of iatrogenic endothelial injury occurs during endovascular thrombectomy (EVT), the clinical significance of such injury is uncertain. Furthermore, it is likely that iatrogenic effects such as endothelial denudation, intimal dissection, and tunica media edema will have varying clinical implications. The purpose of this study was to assess the feasibility of endovascular optical coherence tomography (OCT) in quantifying vessel injury in real time after EVT, correlate vessel injury with histological findings, and perform imaging at varying time intervals after EVT to assess the impact of prolonged direct exposure of the vessel to the thrombus., Methods: Yorkshire swine weighing 35-40 kg were selected for use as the animal model, with a total of 9 vessels from 3 swine examined. Thrombectomy was performed using a second-generation stent retriever 1, 3, and 6 hours after thrombus deposition. The presence and degree of denudation of the endothelium, detachment and separation of the layers of the tunic media, hemorrhage within the media, dissection of the vessels, and thrombus within the lumina were assessed using OCT images acquired immediately after EVT. Bland-Altman analysis indicated that these OCT findings were correlated with postmortem histological findings., Results: OCT image acquisition was technically successful in all cases. Endothelial denudation was present in 65% ± 16%, 87% ± 8%, and 93% ± 7% of the vessel surface 1, 3, and 6 hours, respectively, after thrombus deposition and subsequent EVT. Residual intraluminal thrombus was present in vessels at all time intervals despite complete angiographic revascularization. Bland-Altman plots showed good agreement between OCT and histological analysis with respect to the degree of endothelial denudation and elevation, separation of the tunica media, and hemorrhage within the media. OCT appears to be more specific than histological analysis in detecting endothelial elevation., Conclusions: OCT is a feasible method that can be used to assess vascular injury after EVT with histological accuracy. Varying degrees of vessel injury occur after EVT, and residual luminal thrombus can be present despite complete angiographic revascularization.

Implementing pedicle safe zones with augmented reality has the potential to improve operating room workflow during pedicle screw insertion. These safe zones will allow for image guidance when tracked instruments are unavailable. Using the correct screw trajectory as a reference angle for a successful screw insertion, we will determine the angles which lead to medial, lateral, superior and inferior breaches. These breaches serve as the boundaries of the safe zones. Measuring safe zones from the view of the surgical site and comparing to the radiological view will further understand the visual relationship between the radiological scans and the surgical site. Safe zones were measured on a spine phantom and were then replicated on patients. It was found that the largest causes for variance was between each of the camera views and the radiological views. The differences between the left and right cameras were insignificant. Overall, the camera angles appeared to be larger than the radiological angles. The magnification effect found in the surgical site result in an increased level of angle sensitivity for pedicle screw insertion techniques. By designing a virtual road map on top of the surgical site directly using tracked tools, the magnification effect is already taken into consideration during surgery. Future initiatives include the use of an augmented reality headset., (Crown Copyright © 2020. Published by Elsevier Ltd. All rights reserved.)

Computer assisted navigation (CAN) is a technology which has been available for commercial use in operating rooms for quite some time now. CAN relies on the information presented in patient imaging (usually CT or MRI images) and the surgical site. The method for registration between these two sets of data is crucial for safe image guided navigation during surgery. Although the existing technologies are extremely accurate, they still pose problems in the operating. Motivation for this study is to explore the possibility of using augmented reality (AR) to improve ease of use for surgical navigation and provide a system which complements the existing operating room workflow. As with all commercially available surgical navigation systems, registration accuracy is of utmost important to maintain patient safety. In this paper, we propose a novel method to quantify registration accuracy for augmented reality (AR) devices in neurosurgery., (Crown Copyright © 2019. Published by Elsevier Ltd. All rights reserved.)

We previously proposed a Gabor optical coherence tomography angiography (GOCTA) algorithm for spectral domain optical coherence tomography (SDOCT) to extract microvascular signals from spectral fringes directly, with speed improvement of 4 to 20 times over existing methods. In this manuscript, we explored the theoretical basis of GOCTA with comparison of experimental data using solid and liquid displacement sample targets, demonstrating that the majority of the GOCTA sensitivity advantage over speckle variance based techniques was in the small displacement range (< 10 ∼ 20 µm) of the moving target (such as red blood cells). We further normalized GOCTA signal by root-mean-square (RMS) of original fringes, achieving a more uniform image quality, especially at edges of blood vessels where slow flow could occur. Furthermore, by transecting the spectral fringes and using skipped convolution, the data processing speed could be further improved. We quantified the trade-off in signal-to-noise-ratio (SNR) and contrast-to-noise-ratio (CNR) under various sub-spectral bands and found an optimized condition using 1/4 spectral band for minimal angiography image quality degradation, yet achieving a further 26.7 and 34 times speed improvement on GPU and CPU, respectively. Our optimized GOCTA algorithm has a speed advantage of over 140 times compared to existing speckle variance OCT (SVOCT) method., Competing Interests: The authors declare that there are no conflicts of interest related to this work., (© 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

Purpose: Planning osteotomies is a task that surgeons do as part of standard surgical workflow. This task, however, becomes more difficult and less intuitive when a robot is tasked with performing the osteotomy. In this study, we aim to provide a new method for surgeons to allow for highly intuitive trajectory planning, similar to the way an attending surgeon would instruct a junior., Methods: Planning an osteotomy, especially during a craniotomy, is performed intraoperatively using a sterile surgical pen or pencil directly on the exposed bone surface. This paper presents a new method for generating osteotomy trajectories for a multi-DOF robotic manipulator using the same method and relaying the penscribed cut path to the manipulator as a three-dimensional trajectory. The penscribed cut path is acquired using structured light imaging, and detection, segmentation, optimization and orientation generation of the Cartesian trajectory are done autonomously after minimal user input., Results: A 7-DOF manipulator (KUKA IIWA) is able to follow fully penscribed trajectories with sub-millimeter accuracy in the target plane and perpendicular to it (0.46 mm and 0.36 mm absolute mean error, respectively)., Conclusions: The robot is able to precisely follow cut paths drawn by the surgeon directly onto the exposed boney surface of the skull. We demonstrate through this study that current surgical workflow does not have to be drastically modified to introduce robotic technology in the operating room. We show that it is possible to guide a robot to perform an osteotomy in much the same way a senior surgeon would show a trainee by using a simple surgical pen or pencil.

In this Letter, we propose a beam-shifting optical coherence tomography scheme for speckle reduction and blood flow rate calculation, where variations of the speckle pattern and Doppler angle were generated by parallel shifting of the sample beam incident on the objective lens. The resultant optical coherent tomography images could then be averaged for speckle noise reduction and simultaneously analyzed for flow rate measurement. The performance of the proposed technique was verified by both phantom and in vivo experiments.

Real-time depth metrology during material removal via laser ablation is useful in many forms of laser machining. Until now, coaxial optical coherence tomography (OCT) metrology was achieved by the coupling of an OCT imaging beam and ablating beams using a dichroic filter. We present an alternative design with all fiber delivery that is more suitable for surgical laser ablation applications. The novel system design integrates a high peak-power pulsed Yb-doped fiber laser (1064nm) coupled directly into the sample arm of a swept-source OCT system ( λ c = 1310nm). We measured the OCT signal degradation due to dispersion and attenuation through the ablation fiber laser cavity. Ablation progression is measured in real-time using M-mode OCT. The mean depth targeting error was found to range from 10 µ m to 80 µ m in phantom ablation experiments and 21 µ m to 60 µ m in bone ablation. A number of issues have been solved, including point-spread function (PSF) peak broadening due to signal delay and dispersion, high bending loss due to dissimilar fiber used throughout the design, and problems due to the extremely high ablation power to swept-source power ratio (> 2×10 4 peak to average power). To our knowledge, this is the first demonstration of thermal-mediated laser ablation drilling integrated with coaxial OCT imaging through a single-mode, single-cladded output fiber, without using dichroic beam splitters or free-space optic filters anywhere in the optical path and with this high ablation laser power to OCT source power ratio. The removal of bulk optics compared to existing designs opens a new path for compact integration of the entire system. Also, since the ablation laser and OCT feedback system exist along the same fiber path, the need for maintenance and repair are greatly reduced since spatial beam alignment and the potential open-air contamination of optical surfaces are virtually eliminated. We believe that this integrated system is a great candidate for adoption in depth-controlled surgical ablation applications., Competing Interests: The authors declare that there are no conflicts of interest related to this article.

High frequency micro-ultrasound (µUS) transducers with central frequencies up to 50 MHz facilitate dynamic visualization of patient anatomy with minimal disruption of the surgical work flow. Micro-ultrasound improves spatial resolution over conventional ultrasound imaging from millimeter to micrometer, but compromises depth penetration. This trade-off is sufficient during an open surgery in which the bone is removed and theultrasound probe can be placed into the surgical cavity. By fusing µUS with pre-operative imaging and tracking the ultrasound probe intra-operatively using our optical topographic imaging technology, we can provide dynamic feedback during surgery, thus affecting clinical decision making. We present our initial experience using high-frequency µUS imaging during spinal procedures. Micro-ultrasound images were obtained in five spinal procedures. Medical rationale for use of µUS was provided for each patient. Surgical procedures were performed using the standard clinical practice with bone removal to facilitate real-time ultrasound imaging of the soft tissue. During surgery, the µUS probe was registered to the pre-operative computed tomography and magnetic resonance images. Images obtained comprised five spinal decompression surgeries (four tumor resections, one cystic synovial mass). Micro-ultrasound images obtained during spine surgery delineated exquisite detailing of the spinal anatomy including white matter and gray matter tracts and nerve roots and allowed accurate assessment of the extent of decompression/tumor resection. In conclusion, tracked µUS enables real-time imaging of the surgical cavity, conferring significant qualitative improvement over conventional ultrasound., (Copyright © 2018. Published by Elsevier Inc.)

Intraoperative image-guided surgical navigation for craniospinal procedures has significantly improved accuracy by providing an avenue for the surgeon to visualize underlying internal structures corresponding to the exposed surface anatomy. Despite the obvious benefits of surgical navigation, surgeon adoption remains relatively low due to long setup and registration times, steep learning curves, and workflow disruptions. We introduce an experimental navigation system utilizing optical topographical imaging (OTI) to acquire the 3D surface anatomy of the surgical cavity, enabling visualization of internal structures relative to exposed surface anatomy from registered preoperative images. Our OTI approach includes near instantaneous and accurate optical measurement of >250,000 surface points, computed at >52,000 points-per-second for considerably faster patient registration than commercially available benchmark systems without compromising spatial accuracy. Our experience of 171 human craniospinal surgical procedures, demonstrated significant workflow improvement (41 s vs. 258 s and 794 s, p < 0.05) relative to benchmark navigation systems without compromising surgical accuracy. Our advancements provide the cornerstone for widespread adoption of image guidance technologies for faster and safer surgeries without intraoperative CT or MRI scans. This work represents a major workflow improvement for navigated craniospinal procedures with possible extension to other image-guided applications.

In this paper, a multi-beam scanning technique is proposed to optimize the microvascular images of human skin obtained with Doppler effect based methods and speckle variance processing. Flow phantom experiments were performed to investigate the suitability for combining multi-beam data to achieve enhanced microvascular imaging. To our surprise, the highly variable spot sizes (ranging from 13 to 77 μm) encountered in high numerical aperture multi-beam OCT system imaging the same target provided reasonably uniform Doppler variance and speckle variance responses as functions of flow velocity, which formed the basis for combining them to obtain better microvascular imaging without scanning penalty. In vivo 2D and 3D imaging of human skin was then performed to further demonstrate the benefit of combining multi-beam scanning to obtain improved signal-to-noise ratio (SNR) in microvascular imaging. Such SNR improvement can be as high as 10 dB. To our knowledge, this is the first demonstration of combining different spot size, staggered multiple optical foci scanning, to achieve enhanced SNR for blood flow OCT imaging.

A surgical laser soft tissue ablation system based on an adjustable 1942 nm single-mode all-fiber Tm-doped fiber laser operating in pulsed or CW mode with nitrogen assistance is demonstrated. Ex vivo ablation on soft tissue targets such as muscle (chicken breast) and spinal cord (porcine) with intact dura are performed at different ablation conditions to examine the relationship between the system parameters and ablation outcomes. The maximum laser average power is 14.4 W, and its maximum peak power is 133.1 W with 21.3 μJ pulse energy. The maximum CW power density is 2.33 × 10 6 W/cm 2 and the maximum pulsed peak power density is 2.16 × 10 7 W/cm 2 . The system parameters examined include the average laser power in CW or pulsed operation mode, gain-switching frequency, total ablation exposure time, and the input gas flow rate. The ablation effects were measured by microscopy and optical coherence tomography (OCT) to evaluate the ablation depth, superficial heat-affected zone diameter (HAZD) and charring diameter (CD). Our results conclude that the system parameters can be tailored to meet different clinical requirements such as ablation for soft tissue cutting or thermal coagulation for future applications of hemostasis.

Gas assisted laser machining of materials is a common practice in the manufacturing industry. Advantages in using gas assistance include reducing the likelihood of flare-ups in flammable materials and clearing away ablated material in the cutting path. Current surgical procedures and research do not take advantage of this and in the case for resecting osseous tissue, gas assisted ablation can help minimize charring and clear away debris from the surgical site. In the context of neurosurgery, the objective is to cut through osseous tissue without damaging the underlying neural structures. Different inert gas flow rates used in laser machining could cause deformations in compliant materials. Complications may arise during surgical procedures if the dura and spinal cord are damaged by these deformations. We present preliminary spinal deformation findings for various gas flow rates by using optical coherence tomography to measure the depression depth at the site of gas delivery.

Hemodynamics plays a critical role in the development of atherosclerosis, specifically in regions of curved vasculature such as bifurcations exhibiting irregular blood flow profiles. Carotid atherosclerotic disease can be intervened by stent implantation, but this may result in greater alterations to local blood flow and consequently further complications. This study demonstrates the use of a variant of Doppler optical coherence tomography (DOCT) known as split spectrum DOCT (ssDOCT) to evaluate hemodynamic patterns both before and after stent implantation in the bifurcation junction in the internal carotid artery (ICA). Computational fluid dynamics (CFD) models were constructed to simulate blood velocity profiles and compared to the findings achieved through ssDOCT images. Both methods demonstrated noticeable alterations in hemodynamic patterns following stent implantation, with features such as slow velocity regions at the neck of the bifurcation and recirculation zones at the stent struts. Strong correlation between CFD models and ssDOCT images demonstrate the potential of ssDOCT imaging in the optimization of stent implantation in the clinical setting.

Speckle statistics of flowing scatterers have been well documented in the literature. Speckle variance optical coherence tomography exploits the large variance values of intensity changes in time caused mainly by the random backscattering of light resulting from translational activity of red blood cells to map out the microvascular networks. A method to map out the microvasculature malformation of skin based on the time-domain histograms of individual pixels is presented with results obtained from both normal skin and skin containing vascular malformation. Results demonstrated that this method can potentially map out deeper blood vessels and enhance the visualization of microvasculature in low signal regions, while being resistant against motion (e.g., patient tremor or internal reflex movements). The overall results are manifested as more uniform en face projection maps of microvessels. Potential applications include clinical imaging of skin vascular abnormalities and wide-field skin angiography for the study of complex vascular networks.