Search

Hydrophobic non-ionic (type V) deep eutectic solvents (DESs) have recently emerged as a new class of sustainable materials that have shown unique properties in several applications. In this study, type V DESs thymol : camphor, menthol : thymol and eutectic mixtures (EMs) based on menthol : carboxylic acids with variable chain length, are experimentally investigated using xenon NMR spectroscopy, with the aim to clarify the peculiar nanostructure of these materials. The results, obtained from the analysis of the 129 Xe chemical shifts and of the longitudinal relaxation times, reveal a correlation between the deviation from ideality of the DESs and their structure free volume. Furthermore, the effect of varying the composition of DESs and EMs on the liquid structure is also studied.

Exosomes are promising therapeutics for tissue repair and regeneration to induce and guide appropriate immune responses in dystrophic pathologies. However, manipulating exosomes to control their biodistribution and targeting them in vivo to achieve adequate therapeutic benefits still poses a major challenge. Here we overcome this limitation by developing an externally controlled delivery system for primed annexin A1 myo-exosomes (Exo myo ). Effective nanocarriers are realized by immobilizing the Exo myo onto ferromagnetic nanotubes to achieve controlled delivery and localization of Exo myo to skeletal muscles by systemic injection using an external magnetic field. Quantitative muscle-level analyses revealed that macrophages dominate the uptake of Exo myo from these ferromagnetic nanotubes in vivo to synergistically promote beneficial muscle responses in a murine animal model of Duchenne muscular dystrophy. Our findings provide insights into the development of exosome-based therapies for muscle diseases and, in general, highlight the formulation of effective functional nanocarriers aimed at optimizing exosome biodistribution., (© 2024. The Author(s).)

Transparent nanocomposite films made of surface-modified titanium dioxide nanoparticles and thermoplastic polyurethane are prepared via film casting approach showing enhanced refractive indexes and mechanical properties. Two different sets of composites were prepared up to 37.5 wt % of inorganic nanoparticles with a diameter <15 nm, one set using particles capped only with oleic acid and a second one with a bimodal system layer made of oleic acid and mPEO-5000 as coating agents. All of the composites show significantly enhanced refractive index and mechanical properties than the neat polymeric matrix. The transparency of nanocomposite films shows the excellent dispersion of the inorganic nanoparticles in the polymeric matrix avoiding aggregation and precipitation phenomena. Our study provides a facile and feasible route to produce transparent nanocomposite films with tunable mechanical properties and high refractive indices for various applications., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

A photocatalytic RAFT-controlled radical depolymerization method is introduced for precisely conferring temporal control under visible light irradiation. By regulating the deactivation of the depropagating chains and suppressing thermal initiation, an excellent temporal control was enabled, exemplified by several consecutive "on" and "off" cycles. Minimal, if any, depolymerization could be observed during the dark periods while the polymer chain-ends could be efficiently re-activated and continue to depropagate upon re-exposure to light. Notably, favoring deactivation resulted in the gradual unzipping of polymer chains and a stepwise decrease in molecular weight over time. This synthetic approach constitutes a simple methodology to modulate temporal control during the chemical recycling of RAFT-synthesized polymers while offering invaluable mechanistic insights., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Retrieving the starting monomers from polymers synthesized by reversible deactivation radical polymerization has recently emerged as an efficient way to increase the recyclability of such materials and potentially enable their industrial implementation. To date, most methods have primarily focused on utilizing high temperatures (typically from 120 °C to 180 °C) to trigger an efficient depolymerization reaction. In this work, we show that, in the presence of Eosin Y under light irradiation, a much faster depolymerization of polymers made by reversible addition-fragmentation chain-transfer (RAFT) polymerization can be triggered even at a lower temperature ( i.e. 100 °C). For instance, green light, in conjunction with ppm amounts of Eosin Y, resulted in the accelerated depolymerization of poly(methyl methacrylate) from 16% (thermal depolymerization at 100 °C) to 37% within 1 hour, and finally 80% depolymerization after 8 hours, as confirmed by both 1 H-NMR and SEC analyses. The enhanced depolymerization rate was attributed to the activation of a macroCTA by Eosin Y, thus resulting in a faster macroradical generation. Notably, this method was found to be compatible with different wavelengths ( e.g. blue, red and white light irradiation), solvents, and RAFT agents, thus highlighting the potential of light to significantly improve current depolymerization approaches., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Molecularly imprinted polymers (MIPs) display intriguing recognition properties and can be used as sensor recognition elements or in separation. In this work, we investigated the formation of hierarchical porosity of compositionally varied MIPs using 129 Xe Nuclear Magnetic Resonance (NMR) and 1 H Time Domain Nuclear Magnetic Resonance (TD-NMR). Variable temperature 129 Xe NMR established the morphological variation with respect to the degree of cross-linking, supported by 1 H TD-NMR determination of polymer chain mobility. Together, the results indicate that a high degree of cross-linking stabilizes the porous structure: highly cross-linked samples display a significant amount of accessible mesopores that instead collapse in less structured polymers. No significant differences can be detected due to the presence of templated pores in molecularly imprinted polymers: in the dry state, these specific shapes are too small to accommodate xenon atoms, which, instead, probe higher levels in the porous structure, allowing their study in detail. Additional resonances at a high chemical shift are detected in the 129 Xe NMR spectra. Even though their chemical shifts are compatible with xenon dissolved in bulk polymers, variable temperature experiments rule out this possibility. The combination of 129 Xe and TD-NMR data allows attribution of these resonances to softer superficial regions probed by xenon in the NMR time scale. This can contribute to the understanding of the surface dynamics of polymers., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Lithium metal batteries (LMBs) will be a breakthrough in automotive applications, but they require the development of next-generation solid-state electrolytes (SSEs) to stabilize the anode interface. Polymer-in-ceramic PEO/TiO 2 nanocomposite SSEs show outstanding properties, allowing unprecedented LMBs durability and self-healing capabilities. However, the mechanism underlying the inhibition/delay of dendrite growth is not well understood. In fact, the inorganic phase could act as both a chemical and a mechanical barrier to dendrite propagation. Combining advanced in situ and ex situ experimental techniques, we demonstrate that oligo(ethylene oxide)-capped TiO 2 , although chemically inert toward lithium metal, imparts SSE with mechanical and dynamical properties particularly favorable for application. The self-healing characteristics are due to the interplay between mechanical robustness and high local polymer mobility which promotes the disruption of the electric continuity of the lithium dendrites (razor effect).

The synthesis of hydrogels that are based on poly-hydroxyethyl methacrylate, p(HEMA), network semi-interpenetrated with linear polyvinylpyrrolidone (PVP) was optimized in order to allow both a fast preparation and a high cleaning effectiveness of artistic surfaces. For this purpose, the synthesis parameters of the gel with PVP having a high molecular weight (1300 kDa) that were reported in the literature, were modified in terms of temperature, time, and crosslinker amount. In addition, the gel composition was modified by using PVP with different molecular weights, by changing the initiator and by adding maleic anhydride. The modified gels were characterized in terms of equilibrium water content (EWC), water uptake, conversion grade, and thermal properties by differential scanning calorimetry (DSC). The cleaning effectiveness of the gels was studied through the removal of copper salts from laboratory-stained specimens. Cleaning materials were characterized by electron paramagnetic resonance (EPR) spectroscopy, ultraviolet-visible (UV-Vis) spectroscopy, and inductively-coupled plasma-mass spectrometry (ICP-MS). Cleaning was assessed on marble specimens by color variation measurements. The gel synthesis is accelerated by using PVP 360 kDa. The addition of maleic anhydride in the p(HEMA)/PVP network allows the most effective removal of copper salt deposits from marble since it acts as a chelator towards copper ions., Competing Interests: The authors declare no conflict of interest.

The dynamics of xenon gas, loaded in a series of 1-alkyl-3-methylimidazolium based ionic liquids, probes the formation of increasingly blurred polar/apolar nanodomains as a function of the anion type and the cation chain length. Exploiting 129 Xe NMR spectroscopy techniques, like Pulse Gradient Spin Echo (PGSE) and inversion recovery (IR), the diffusion motion and relaxation times are determined for 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C n C 1 im][TFSI]. A correlation between the ILs nano-structure and both xenon diffusivity and relaxation times, as well as chemical shifts, is outlined. Interestingly, comparison with previous results of the same properties in the homologous imidazolium chlorides and hexafluorophospate shows an opposite trend with the alkyl chain length. Classical molecular dynamics (MD) simulations are used to calculate the xenon and cation and anion diffusion coefficients in the same systems, including imidazolium cations with longer chains (n=4, 6, 8 … 20). An almost quantitative agreement with the experiments validates the MD simulations and, at the same time, provides the necessary structural and dynamic microscopic insights on the nano-segregation and diffusion of xenon in bistriflimide, chloride and hexafluorphosphate salts allowing to observe and rationalize the shaping effect of the cation in the nanostructure., (© 2021 Wiley-VCH GmbH.)

The industrial processing of avocados annually generates more than 1.2 million tons of avocado peels (APs) and avocado seeds (ASs) that have great potential in the production of active bioplastics, although they have never been considered for this aim until now. Separately, the APs and ASs, as well as a combination of avocado peels and seeds (APSs), were evaluated here for the first time for the preparation of antioxidant films, with application in food packaging. Films were prepared by casting, after their processing by three different methods: (1) hydrolysis in acid media, (2) hydrolysis followed by plasticization, and (3) hydrolysis and plasticization followed by blending with pectin polymers in different proportions (25 and 50 wt %). The results indicate that the combination of hydrolysis, plasticization, and pectin blending is essential to obtain materials with competitive mechanical properties, optical clarity, excellent oxygen barrier properties, high antioxidant activity, biodegradability, and migration of components in TENAX suitable for food contact applications. In addition, the materials prepared with APSs are advantageous from the point of view of the industrial waste valorization, since the entire avocado wastes are used for the production of bioplastics, avoiding further separation processes for their valorization.

Photochemistry has attracted great interest in the last decades in the field of polymer and material science for the synthesis of innovative materials. The merging of photochemistry and reversible-deactivation radical polymerizations (RDRP) provides good reaction control and can simplify elaborate reaction protocols. These advantages open the doors to multidisciplinary fields going from composite materials to bio-applications. Photoinduced Electron/Energy Transfer Reversible Addition-Fragmentation Chain-Transfer (PET-RAFT) polymerization, proposed for the first time in 2014, presents significant advantages compared to other photochemical techniques in terms of applicability, cost, and sustainability. This review has the aim of providing to the readers the basic knowledge of PET-RAFT polymerization and explores the new possibilities that this innovative technique offers in terms of industrial applications, new materials production, and green conditions.

Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).

Membrane modification is becoming ever more relevant for mitigating fouling phenomena within wastewater treatment applications. Past research included a novel low-fouling coating using polymerizable bicontinuous microemulsion (PBM) induced by UV-LED polymerization. This additional cover layer deteriorated the filtration capacity significantly, potentially due to the observed high pore intrusion of the liquid PBM prior to the casting process. Therefore, this work addressed an innovative experimental protocol for controlling the viscosity of polymerizable bicontinuous microemulsions (PBM) before casting on commercial ultrafiltration (UF) membranes. Prior to the coating procedure, the PBM viscosity modulation was carried out by controlled radical polymerization (CRP). The regulation was conducted by introducing the radical inhibitor 2,2,6,6-tetramethylpiperidine 1-oxyl after a certain time (CRP time). The ensuing controlled radical polymerized PBM (CRP-PBM) showed a higher viscosity than the original unpolymerized PBM, as confirmed by rheological measurements. Nevertheless, the resulting CRP-PBM-cast membranes had a lower permeability in water filtration experiments despite a higher viscosity and potentially lower pore intrusion. This result is due to different polymeric structures of the differently polymerized PBM, as confirmed by solid-state nuclear magnetic resonance (NMR) investigations. The findings can be useful for future developments in the membrane science field for production of specific membrane-coating layers for diverse applications.

The translational dynamics of xenon gas dissolved in room-temperature ionic liquids (RTILs) is revealed by 129 Xe NMR and molecular dynamics (MD) simulations. The dynamic behavior of xenon gas loaded in 1-alkyl-3-methylimidazolium chloride, [C n C 1 im]Cl ( n = 6, 8, 10), and hexafluorophosphate, [C n C 1 im][PF 6 ] ( n = 4, 6, 8, 10) has been determined by measuring the 129 Xe diffusion coefficients and NMR relaxation times. The analysis of the experimental NMR data demonstrates that, in these representative classes of ionic liquids, xenon motion is influenced by the length of the cation alkyl chain and anion type. 129 Xe spin-lattice relaxation times are well described with a monoexponential function, indicating that xenon gas in ILs effectively experiences a single average environment. These experimental results can be rationalized based on the analysis of classical MD trajectories. The mechanism described here can be particularly useful in understanding the separation and adsorption properties of RTILs.

PEGylation of metal oxide nanoparticles is the common approach to improve their biocompatibility and in vivo circulation time. In this work, we present a combined experimental and theoretical study to determine the operating condition that guarantee very high grafting densities, which are desirable in any biomedical application. Moreover, we present an insightful conformational analysis spanning different coverage regimes and increasing polymer chain lengths. Based on 13 C NMR measurements and molecular dynamics simulations, we show that classical and popular models of polymer conformation on surfaces fail in determining the mushroom-to-brush transition point and prove that it actually takes place only at rather high grafting density values., Competing Interests: The authors declare no competing financial interest., (Copyright © 2019 American Chemical Society.)

Ionic liquid (IL) mixtures enable the design of fluids with finely tuned structural and physicochemical properties for myriad applications. In order to rationally develop and design IL mixtures with the desired properties, a thorough understanding of the structural origins of their physicochemical properties and the thermodynamics of mixing needs to be developed. To elucidate the structural origins of the excess molar volume within IL mixtures containing ions with different alkyl chain lengths, 3 IL mixtures containing 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ILs have been explored in a joint small angle X-ray scattering (SAXS) and 129Xe NMR study. The apolar domains of the IL mixtures were shown to possess similar dimensions to the largest alkyl chain of the mixture with the size evolution determined by whether the shorter alkyl chain was able to interact with the apolar domain. 129Xe NMR results illustrated that the origin of excess molar volume in these mixtures was due to fluctuations within these apolar domains arising from alkyl chain mismatch, with the formation of a greater number of smaller voids within the IL structure. These results indicate that free volume effects for these types of mixtures can be predicted from simple considerations of IL structure and that the structural basis for the formation of excess molar volume in these mixtures is substantially different to IL mixtures formed of different types of ions.

Nanocrystals (NCs) surface characterization is a fundamental step for understanding the physical and chemical phenomena involved at the nanoscale. Surface energy and chemistry depend on particle size and composition, and, in turn, determine the interaction of NCs with the surrounding environment, their properties and stability, and the feasibility of nanocomposites. This work aims at extracting more information on the surface of different titanium dioxide polymorphs using 1 H-TD-NMR of water. Taking advantage of the interaction between water molecules and titanium dioxide NCs, it is possible to correlate the proton transverse relaxation times ( T 2 ) as the function of the concentration and the specific surface area (δ p · C m ) and use it as an indicator of the crystal phase. Examples of three different crystals phase, rutile, anatase, and brookite, have been finely characterized and their behavior in water solution have been studied with TD-NMR. The results show a linear correlation between relaxivity ( R 2 ) and their concentration C m . The resulting slopes, after normalization for the specific surface, represent the surface/water interaction and range from 1.28 g m -2 s -1 of 50 nm rutile nanocrystals to 0.52 for similar sized brookite. Even higher slopes (1.85) characterize smaller rutile NCs, in qualitative accordance with the trends of surface energy. Thanks to proton relaxation phenomena that occur at the NCs surface, it is possible to differentiate the crystal phase and the specific surface area of titanium dioxide polymorphs in water solution.

Carminic acid, a natural hydrophilic dye extensively used in the food and cosmetic industries, is converted in hydrophobic dyes by acetylation or pivaloylation. These derivatives are successfully used as biocolourants for rubber objects. In this paper, spectroscopic properties of the carminic acid derivatives in dimethyl sulfoxide and in polybutylacrylate are studied by means of photoluminescence and time-resolved photoluminescence decays, revealing a hypsochromic effect due to the presence of bulky substituents as the acetyl or pivaloyl groups. Molecular mechanics and density functional theory calculations confirm the disruption of planarity between the sugar ring and the anthraquinoid system determined by the esterification., Competing Interests: We declare we have no competing interests.

Subtle alterations in the mid-block of polystyrene- b -poly (ethylene-co-butylene)- b -polystyrene (SEBS) have a significant impact on the mechanical properties of the resulting microphase separated materials. In samples with high butylene content, the ethylene- co -butylene (EB) phase behaves as a rubber, as seen by differential scanning calorimetry (DSC), time domain (TD) and Magic Angle Spinning (MAS) NMR, X-ray scattering at small (SAXS), and wide (WAXS) angles. In samples where the butylene content is lower-but still sufficient to prevent crystallization in bulk EB-the DSC thermogram presents a broad endothermic transition upon heating from 221 to 300 K. TD NMR, supported by WAXS and dielectric spectroscopy measurements, probed the dynamic phenomena of EB during this transition. The results suggest the existence of a rotator phase for the EB block below room temperature, as a result of nanoconfinement.

Upconversion is a photon-management process especially suited to water-splitting cells that exploit wide-bandgap photocatalysts. Currently, such catalysts cannot utilize 95% of the available solar photons. We demonstrate here that the energy-conversion yield for a standard photocatalytic water-splitting device can be enhanced under solar irradiance by using a low-power upconversion system that recovers part of the unutilized incident sub-bandgap photons. The upconverter is based on a sensitized triplet-triplet annihilation mechanism (sTTA-UC) obtained in a dye-doped elastomer and boosted by a fluorescent nanocrystal/polymer composite that allows for broadband light harvesting. The complementary and tailored optical properties of these materials enable efficient upconversion at subsolar irradiance, allowing the realization of the first prototype water-splitting cell assisted by solid-state upconversion. In our proof-of concept device the increase of the performance is 3.5%, which grows to 6.3% if concentrated sunlight (10 sun) is used. Our experiments show how the sTTA-UC materials can be successfully implemented in technologically relevant devices while matching the strict requirements of clean-energy production.

The formation of ionic liquid (IL) mixtures has been proposed as an approach to rationally fine-tune the physicochemical properties of ILs for a variety of applications. However, the effects of forming such mixtures on the resultant properties of the liquids are only beginning to be understood. Towards a more complete understanding of both the thermodynamics of mixing ILs and the effect of mixing these liquids on their structures and physicochemical properties, the spatial arrangement and free volume of IL mixtures containing the common [C 4 C 1 im] + cation and different anions have been systematically explored using small angle X-ray scattering (SAXS), positron annihilation lifetime spectroscopy (PALS) and 129 Xe NMR techniques. Anion size has the greatest effect on the spatial arrangement of the ILs and their mixtures in terms of the size of the non-polar domains and inter-ion distances. It was found that differences in coulombic attraction between oppositely charged ions arising from the distribution of charge density amongst the atoms of the anion also significantly influences these inter-ion distances. PALS and 129 Xe NMR results pertaining to the free volume of these mixtures were found to strongly correlate with each other despite the vastly different timescales of these techniques. Furthermore, the excess free volumes calculated from each of these measurements were in excellent agreement with the excess volumes of mixing measured for the IL mixtures investigated. The correspondence of these techniques indicates that the static and dynamic free volume of these liquid mixtures are strongly linked. Consequently, fluxional processes such as hydrogen bonding do not significantly contribute to the free volumes of these liquids compared to the spatial arrangement of ions arising from their size, shape and coulombic attraction. Given the relationship between free volume and transport properties such as viscosity and conductivity, these results provide a link between the structures of IL mixtures, the thermodynamics of mixing and their physicochemical properties.

Super paramagnetic iron oxide nanoparticles (SPION) were augmented by both hyaluronic acid (HA) and bovine serum albumin (BSA), each covalently conjugated to dopamine (DA) enabling their anchoring to the SPION. HA and BSA were found to simultaneously serve as stabilizing polymers of Fe₃O₄·DA-BSA/HA in water. Fe₃O₄·DA-BSA/HA efficiently entrapped and released the hydrophobic cytotoxic drug paclitaxel (PTX). The relative amount of HA and BSA modulates not only the total solubility but also the paramagnetic relaxation properties of the preparation. The entrapping of PTX did not influence the paramagnetic relaxation properties of Fe₃O₄·DA-BSA. Thus, by tuning the surface structure and loading, we can tune the theranostic properties of the system., Competing Interests: The authors declare no conflicts of interest.

The technological application of sensitized upconversion based on triplet-triplet annihilation (TTA) requires the transition from systems operating in liquid solutions to solid-state materials. Here, we demonstrate that the high upconversion efficiency reported in hyper-cross-linked nanoparticles does not originate from residual mobility of the embedded dyes as it happens in soft hosts. The hyper-reticulation from one side blocks the dyes in fixed positions, but on the other one, it suppresses the nonradiative spontaneous decay of the triplet excitons, reducing intramolecular relaxations. TTA is thus enabled by an unprecedented extension of the triplet lifetime, which grants long excitons diffusion lengths by hopping among the dye framework and gives rise to high upconversion yield without any molecular displacement. This finding paves the way for the design of a new class of upconverting materials, which in principle can operate at excitation intensities even lower than those requested in liquid or in rubber hosts.

Poly(n-butylacrylate)@polystyrene nanoparticles behaving as a capsule-based sealing nanoadditive are synthesized through an optimized semicontinuous emulsion polymerization protocol. Solid state time-domain (1)H-NMR and (13)C magic angle spinning (MAS) NMR analysis suggest strong phase separation. Line width of (13)C resonances in cross polarization and single pulse experiment MAS-NMR spectra indicates that the peculiar mobility of each phase is preserved at the nanoscale. Atomic force spectroscopy (AFM) shows the permanence of spherical shape in absence of solvent (i.e., subsequent to strong capillary and surface forces) up to moderate external load, as well as the possibility of plastically deforming the polystyrene shell and ultimately triggering the nanoparticle flow at higher force loads. The breakdown characteristic of the nanoparticle shows for the first time baroplastic behavior on a single particle with precise biphasic core@shell morphology., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In the search of new drug delivery carriers for the brain, self-assembled nanoparticles (NP) were prepared from poly(N,N-dimethylacrylamide)-block-polystyrene polymer. NP displayed biocompatibility on cultured endothelial cells, macrophages and differentiated SH-SY5Y neuronal-like cells. The surface-functionalization of NP with a modified fragment of human Apolipoprotein E (mApoE) enhanced the uptake of NP by cultured human brain capillary endothelial cells, as assessed by confocal microscopy, and their permeability through a Transwell Blood Brain Barrier model made with the same cells, as assessed by fluorescence. Finally, mApoE-NP embedding doxorubicin displayed an enhanced release of drug at low pH, suggesting the potential use of these NP for the treatment of brain tumors., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Luminescent solar concentrators serving as semitransparent photovoltaic windows could become an important element in net zero energy consumption buildings of the future. Colloidal quantum dots are promising materials for luminescent solar concentrators as they can be engineered to provide the large Stokes shift necessary for suppressing reabsorption losses in large-area devices. Existing Stokes-shift-engineered quantum dots allow for only partial coverage of the solar spectrum, which limits their light-harvesting ability and leads to colouring of the luminescent solar concentrators, complicating their use in architecture. Here, we use quantum dots of ternary I-III-VI2 semiconductors to realize the first large-area quantum dot-luminescent solar concentrators free of toxic elements, with reduced reabsorption and extended coverage of the solar spectrum. By incorporating CuInSexS2-x quantum dots into photo-polymerized poly(lauryl methacrylate), we obtain freestanding, colourless slabs that introduce no distortion to perceived colours and are thus well suited for the realization of photovoltaic windows. Thanks to the suppressed reabsorption and high emission efficiencies of the quantum dots, we achieve an optical power efficiency of 3.2%. Ultrafast spectroscopy studies suggest that the Stokes-shifted emission involves a conduction-band electron and a hole residing in an intragap state associated with a native defect.

Molecular arrangement plays a role in the diffusion of water and solutes across soft contact lenses. In particular, the uptake of solutes in hydrated contact lenses can occur as long as free water is available for diffusion. In this work, we investigated the effect of mechanical vibrations of low frequency (200 Hz) on the solute uptake. Hyaluronan, a polysaccharide of ophthalmic use, was taken as example of solute of interest. For a specific water-hydrated hydrogel material, differential scanning calorimetry experiments showed that a large fraction of the hydration water accounted for loosely-bound water, both before and after one week of daily-wear of the lenses. The size (of the order of magnitude of few hundreds of nanometers) of hyaluronan in aqueous solution was found to be less than the size of the pores of the lens observed by scanning electron microscopy. However, solute uptake in already-hydrated lenses was negligible by simple immersion, while a significant increase occurred under mechanical vibrations of 200 Hz, thus providing experimental evidence of mechanically triggered enhanced solute uptake, which is attributed to the release of interfacial loosely-bound water. Also other materials were taken into consideration. However, the effectiveness of mechanical vibrations for hyaluronan uptake is restricted to lenses containing interfacial loosely-bound water. Indeed, loosely-bound water is expected to be bound to the polymer with bonding energies of the order of magnitude of 10-100 J/g, which are compatible with the energy input supplied by the vibrations., (Copyright © 2015 Elsevier B.V. All rights reserved.)

(129)Xe NMR has been recently employed to probe the local structure of ionic liquids (ILs). However, no theoretical investigation has been yet reported addressing the problem of the dependence of the chemical shift of xenon on the cage structure of the IL. Therefore, we present here a study of the chemical shift of (129)Xe in two ionic liquids, [bmim][Cl] and [bmim][PF6], by a combination of classical MD simulations and relativistic DFT calculations of the xenon shielding constant. The bulk structure of the two ILs is investigated by means of the radial distribution functions, paying special attention to the local structure, volume, and charge distribution of the cage surrounding the xenon atom. Relativistic DFT calculations, based on the ZORA formalism, on clusters extracted from the trajectory files of the two systems, yield an average relative chemical shift in good agreement with the experimental data. Our results demonstrate the importance of the cage volume and the average charge surrounding the xenon nucleus in the IL cage as the factors determining the effective shielding.

The hierarchical self-assembly of an amphiphilic block copolymer, poly(N,N-dimethylacrylamide)-block-polystyrene with a very short hydrophilic block (PDMA10 -b-PS62 ), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The detailed analysis of the time resolved luminescence of a specifically designed fluorescent molecular rotor enables the direct monitoring of the self-assembly of a poly(N,N-dimethylacrylamide)-block-polystyrene (PDMA-b-PS) copolymer into core-corona nanoparticles. Comparison with bulk PS indicates hard confinement of the micelle core, due to the solvation of the hydrophilic PDMA corona.

A novel aldehyde-bearing trithiocarbonate has been synthesized and reacted with carbon nanostructures with different dimensionalities (nanotubes, fullerenes, graphite). The decoration of these carbon nanostructures with trithiocarbonate moieties should provide a powerful tool for the design of advanced carbon nanofillers.

The chemical shift of xenon (at natural abundance) dissolved in a variety of 1-butyl-3-methylimidazolium-based ionic liquids (ILs) has been measured with (129)Xe NMR spectroscopy. The large chemical shift differences observed are mainly related to the type of anion; the strongest deshielding effect is observed ILs with I(-), Br(-), and Cl(-) anions, and the strongest shielding is found for the bis(trifluoromethanesulfonyl)imide ([Tf2N](-))-based IL. The measured (129)Xe chemical shift variations correlate well with the IL structure organization imposed by the anions and with the size of the empty voids due to charge alternation patterns. Descriptors taken from literature data on X-ray and neutron scattering, as well as single-crystal structures where available, support this interpretation. The proposed methodology adds a new investigating tool to the elucidation of the short-range order in ILs. The observed chemical shift trend provides information about how these solvents are organized.

A new oxyiminopyrazole-based ytterbium chelate enables NIR emission upon UV excitation in colorless single layer luminescent solar concentrators for building integrated photovoltaics., (This journal is © the Owner Societies 2012)

We describe two synthesis approaches to colloidal Cu(3)P nanocrystals using trioctylphosphine (TOP) as phosphorus precursor. One approach is based on the homogeneous nucleation of small Cu(3)P nanocrystals with hexagonal plate-like morphology and with sizes that can be tuned from 5 to 50 nm depending on the reaction time. In the other approach, metallic Cu nanocrystals are nucleated first and then they are progressively phosphorized to Cu(3)P. In this case, intermediate Janus-like dimeric nanoparticles can be isolated, which are made of two domains of different materials, Cu and Cu(3)P, sharing a flat epitaxial interface. The Janus-like nanoparticles can be transformed back to single-crystalline copper particles if they are annealed at high temperature under high vacuum conditions, which makes them an interesting source of phosphorus. The features of the Cu-Cu(3)P Janus-like nanoparticles are compared with those of the striped microstructure discovered more than two decades ago in the rapidly quenched Cu-Cu(3)P eutectic of the Cu-P alloy, suggesting that other alloy/eutectic systems that display similar behavior might give origin to nanostructures with flat, epitaxial interface between domains of two diverse materials. Finally, the electrochemical properties of the copper phosphide plates are studied, and they are found to be capable of undergoing lithiation/delithiation through a displacement reaction, while the Janus-like Cu-Cu(3)P particles do not display an electrochemical behavior that would make them suitable for applications in batteries., (© 2011 American Chemical Society)

Blends of chlorinated polyethylene and nylon-6/-6,6/-12 terpolyamide were prepared. The ratio of the two components was systematically varied within the blends. The mechanical behavior of the samples was analyzed with tensile tests and dynamical mechanical analysis showing that, for several ratios, materials with improved mechanical properties typical of thermoplastic elastomers were obtained. In such a mechanical regime, a co-continuous phase-separated morphology was clearly evidenced at the microscopic scale by 3D laser scanning confocal fluorescent microscopy (LSCFM). At blend compositions where plastic tensile behavior is observed, LSCFM reveals dispersed spheres of one component in the other., (Copyright © 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

A porous single-crystal collects xenon atoms from the gas phase and orients them macroscopically, as highlighted by hyperpolarized xenon NMR.

Controlled morphogenesis and shape replication are challenges for several rapidly developing fields of materials science. Indeed, although complex forms have been generated by the condensation of inorganic matter in organized media, the shaping of plastic matter on the micrometre scale is still limited to simple forms that are typically obtained as inverse replicas of channel-like cavities and colloidal crystals. Here we report the fabrication of individual plastic micro-objects that follow an elaborate design and are faithful copies of nanoporous inorganic morphotypes. The direct replica method produces an unprecedented library of curved geometrical solids made of plastics, such as cones, bicones, hollow cylinders, rings, test tubes, clubs and vases. The shape retention of the original structures on the microscale and the creation of a new nanostructure produced objects with homogeneous nanopores of 7 nm and cylindrical microcavities as large as 1 microm. This strategy of shape transcription from one material to another opens new perspectives in microfabrication, separation, anchorage and storage of chemical and biological species. Until now it has not been possible to realize such transformations.

Interlayer nanoporosity of hectorite pillared by tetraethylammonium ions is explored by hyperpolarized xenon NMR and relevant gases such as carbon dioxide revealing the adsorption capacity of the open galleries.

The mobility of a series of linear alkanes in their inclusion compound with tris(o-phenylenedioxy)spirotriphosphazene is studied by high-resolution carbon-proton magic-angle spinning solid-state NMR spectroscopy. Two different carbon-proton dipolar recoupling experiments are compared with respect to their ability to yield precise site-specific, motion-averaged dipolar coupling constants. The most accurate results are obtained by analysis of extrema positions in Lee-Goldburg cross-polarization build-up curves. We present a comprehensive collection of coupling constants, which evidence a rotational motion of the all-trans chains around the channel axis, with some further averaging due to additional fluctuations, as previously found for alkanes in other host matrices such as urea. The order parameter increases toward the inner parts of the chains, and is largely independent of chain length. Notably, chains in a TPP host are not more ordered than in urea, even though the average TPP channel diameter is reported to be smaller. Significantly decreased order is found for highly filled short-alkane samples, which is interpreted in terms of an increased rate of mutual collisions. From residual dipolar couplings as well as carbon chemical shifts, we derive similar amounts of gauche conformers. Translational motions along the channels are further studied by proton double-quantum spectroscopy, which probes guest-host dipolar couplings. The extent of local-scale lateral motion is again correlated with the sample filling, and is a weak function of temperature, as expected from a case in which highly restricted single-file diffusion should dominate the mobility. Characteristic effects of sample aging are apparent in all our experiments.

Two oligothiophenes, 4,4'-dipentoxy-2,2'-dithiophene and 4,4"-dipentoxy-2,2':5',2":5",2' ''-tetrathiophene, have been included in the nanochannels of the autoassembling host TPP (tris-o-phenylenedioxycyclotriphosphazene). The effect of the confinement on the structure and properties of the two dyes, as conformational arrangements, dynamics, and photophysical behavior, was addressed by the combination of high spinning speed solid-state NMR and time-resolved EPR spectroscopy. We compared the conformations of the dyes in their ground and photoexcited triplet states and described in detail the dynamics of the supramolecular adducts from 4 K to room temperature. Above 200 K surprisingly fast spinning rates of the dithiophene core were discovered, while the side chains show far slower reorientation motion, being in bulky gauche-rich conformations. These lateral plugs keep the planar core as appended in the space like a nanoscale gyroscope, allowing a reorientation in the motion regime of liquids and a long triplet lifetime at unusually high temperature. The nuclear magnetic properties of the guest dyes are also largely affected by the aromatic rings of the neighboring host, imparting an impressive magnetic susceptibility effect (2 ppm proton shift). The high mobility is due to the formation of a nanocage in a channel where aliphatic and aromatic functions isolate the thiophene moieties. Instead, two conformers of the tetrathiophene twisted on the central bond are stabilized by interaction with the host. They interconvert fast enough to be averaged in the NMR time scale.

Advanced 2D solid state NMR techniques reveal weak intermolecular interactions that cooperatively sustain nanostructures of high molecular mass aliphatic polymers entrapped as guests in channels formed by an aromatic host.

Ethanol associates easily with MgCl(2) to form adducts of complex architecture, but until now available characterization methods have failed to identify the pure stoichiometric compounds and their structures. To remedy this, we set about applying homonuclear and heteronuclear 2D correlated solid-state NMR spectroscopy to identify the pure compounds and the ethanol-to-magnesium coordination pattern. High spinning speed and Lee-Goldburg sequences were able to reduce the hydrogen spin-diffusion and homonuclear coupling in the crystalline solid, thus achieving high resolution also in the hydrogen domain. On this basis, the pure adducts, of interest as catalyst supports for Ziegler-Natta polymerization, were isolated for the first time. Magnesium coordination sites with given numbers of ligands and their multiplicity in the crystal cells were determined in the new-found stoichiometric complexes. Variable temperature and 2D carbon-carbon exchange NMR, as well as relaxation times in the fast motion regime, revealed the disordering phenomena generated by ethanol dynamics in the crystal. Decoding the intriguing polymorphism of the precursors permits to trace the genealogy of tailored MgCl(2) titanate granules, active as highly productive catalysts for the stereospecific polymerization of olefins.