Search

Surface modification is essential in microfluidic applications due to the inherent hydrophobicity of polymers, which can lead to biofouling and reagent denaturation. Despite the development, challenges such as hydrophobic molecule absorption and limitations in scaling are still present. Off-stoichiometry thiol-ene (OSTE) materials have emerged as a promising alternative, offering advantages like rapid prototyping, minimal hydrophobic absorption, and customizable surface chemistries. While the thiol-ene polymerization mechanism is well understood, the fundamental understanding of thiol group binding on OSTE surfaces remains limited. Existing techniques to analyze surface groups lack the capability to confirm the stable presence of thiol groups on the surface. In our study, using Raman and X-ray photoelectron spectroscopy techniques, we investigated a potential method for enhancing the surface properties of OSTE polymer-the attachment of novel linkers to the surface. We have demonstrated our synthesized compound efficiency by binding gold nanoparticles to the OSTE surface. Our findings indicate that chemical reactions involving double bonds with the material surface hold the most potential for effective surface modification for gold binding.

This article presents an examination of well-controlled patterns created using a Ga + -based focused ion beam (FIB) on glass, while silicon substrates were used to evaluate the FIB performance by its achievable feature size versus time constraints. The pattern creation on glass was developed with the aim of studying potential surface-enhanced Raman spectroscopy (SERS) applications. Furthermore, the FIB was used to create dimer systems of periodically and randomly positioned dumbbell-shaped pits on the glass (each dimer occupies an area of 203 × 87 nm 2 ). By following the bitmap pattern files, the FIB ensured there was 3000 dimer fabrication over a 20 × 20 μm 2 large area, with a pit size and position variation below 10 nm. The article highlights that FIB can be used for precise large-area nano-fabrication. The gold nanoparticle dimers were formed on the prepatterned surface via capillary force-assisted deposition. The fabricated nanostructures were tested in SERS measurements. The enhancement factor for Rhodamine B molecule reached ~10 5 , demonstrating the potential application of the method to create nanostructures in the sensor domain.

We demonstrate the generation of high-order harmonics of laser pulses in palladium and cadmium plasmas. We adjusted the wavelength of driving pulses to investigate the resonance enhancement in different ranges of extreme ultraviolet region. The summation of incommensurate waves during the two-color pump of Pd and Cd plasmas allowed the generation of a broader range of harmonics. The theoretical aspects of the two-color pump of the laser-induced plasma are discussed.

Amorphous calcium phosphate (ACP) is the first solid phase precipitated from a supersaturated calcium phosphate solution. Naturally, ACP is formed during the initial stages of biomineralization and stabilized by an organic compound. Carboxylic groups containing organic compounds are known to regulate the nucleation and crystallization of hydroxyapatite. Therefore, from a biomimetic point of view, the synthesis of carboxylate ions containing ACP (ACPC) is valuable. Usually, ACP is synthesized with fewer steps than ACPC. The precipitation reaction of ACP is rapid and influenced by pH, temperature, precursor concentration, stirring conditions, and reaction time. Due to phosphates triprotic nature, controlling pH in a multistep approach becomes tedious. Here, we developed a new ACP and ACPC synthesis approach and thoroughly characterized the obtained materials. Results from vibration spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), true density, specific surface area, and ion release studies have shown a difference in the physiochemical properties of the ACP and ACPC. Additionally, the effect of a carboxylic ion type on the physiochemical properties of ACPC was characterized. All of the ACPs and ACPCs were synthesized in sterile conditions, and in vitro analysis was performed using MC-3T3E1 cells, revealing the cytocompatibility of the synthesized ACPs and ACPCs, of which the ACPC synthesized with citrate showed the highest cell viability., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

We present a crack-free optically active SiO 2 glass-composite material containing YAG:Ce synthesized via a modified sol-gel technique. A glass-composite material consisting of yttrium aluminum garnet doped with Ce 3+ (YAG:Ce) was entrapped into a SiO 2 xerogel. This composite material was prepared using a sol-gel technique with modified gelation and a drying process to obtain crack-free optically active SiO 2 glass. The concentration of the YAG:Ce was from 0.5 to 2.0 wt%. All synthesized samples were characterized via X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques, confirming their exceptional quality and structural integrity. The luminescence properties of the obtained materials were studied. Overall, the prepared samples' excellent structural and optical quality makes them great candidates for further investigation, or even potential practical application. Furthermore, boron-doped YAG:Ce glass was synthesized for the first time.

This paper aimed to estimate the effect of post-printing cooling conditions on the tensile and thermophysical properties of ULTEM ® 9085 printed parts processed by fused deposition modeling (FDM). Three different cooling conditions were applied after printing Ultem samples: from 180 °C to room temperature (RT) for 4 h in the printer (P), rapid removal from the printer and cooling from 200 °C to RT for 4 h in the oven (O), and cooling at RT (R). Tensile tests and dynamic mechanical thermal analysis (DMTA) were carried out on samples printed in three orthogonal planes to investigate the effect of the post-printing cooling conditions on their mechanical and thermophysical properties. Optical microscopy was employed to relate the corresponding macrostructure to the mechanical performance of the material. The results obtained showed almost no difference between samples cooled either in the printer or oven and a notable difference for samples cooled at room temperature. Moreover, the lowest mechanical performance and sensitivity to the thermal cooling conditions were defined for the Z printing direction due to anisotropic nature of FDM and debonding among layers.

We report the procedure for hydrothermal synthesis of ultrasmall Yb 3+ /Tm 3+ co-doped Sr 2 LaF 7 (SLF) upconversion phosphors. These phosphors were synthesized by varying the concentrations of Yb 3+ (x = 10, 15, 20, and 25 mol%) and Tm 3+ (y = 0.75, 1, 2, and 3 mol%) with the aim to analyze their emissions in the near IR spectral range. According to the detailed structural analysis, Yb 3+ and Tm 3+ occupy the La 3+ sites in the SLF host. The addition of Yb 3+ /Tm 3+ ions has a huge impact on the lattice constant, particle size, and PL emission properties of the synthesized SLF nanophosphor. The results show that the optimal dopant concentrations for upconversion luminescence of Yb 3+ /Tm 3+ co-doped SLF are 20 mol% Yb 3+ and 1 mol% Tm 3+ with EDTA as the chelating agent. Under 980 nm light excitation, a strong upconversion emission of Tm 3+ ions around 800 nm was achieved. In addition, the experimental photoluminescence lifetime of Tm 3+ emission in the SLF host is reported. This study discovered that efficient near IR emission from ultrasmall Yb 3+ /Tm 3+ co-doped SLF phosphors may have potential applications in the fields of fluorescent labels in bioimaging and security applications., Competing Interests: The authors declare no conflicts of interest.

Yttrium aluminum garnet doped with europium with an additional impurity phase of yttrium vanadate doped europium has been prepared in different ways: synthesized by a sol-gel route and mechanically mixed in a mortar. The obtained samples were characterized by X-ray diffraction analysis, and scanning electron microscopy. Photoluminescence spectra were recorded to understand the role of the impurity phase in the garnet's optical properties. The impurity phase showed a significant contribution to the optical properties of Y 3 Al 5 O 12 :1%Eu., Competing Interests: The authors declare no conflict of interest., (© 2022 The Author(s).)

The aim of the research was to estimate the effect of core-shell rubber (CSR) nanoparticles on the tensile properties, fracture toughness, and glass transition temperature of the epoxy and epoxy-based carbon fiber reinforced polymer (CFRP). Three additives containing CSR nanoparticles were used for the research resulting in a filler fraction of 2-6 wt.% in the epoxy resin. It was experimentally confirmed that the effect of the CSR nanoparticles on the tensile properties of the epoxy resin was notable, leading to a reduction of 10-20% in the tensile strength and elastic modulus and an increase of 60-108% in the fracture toughness for the highest filler fraction. The interlaminar fracture toughness of CFRP was maximally improved by 53% for ACE MX 960 at CSR content 4 wt.%. The glass transition temperature of the epoxy was gradually improved by 10-20 °C with the increase of CSR nanoparticles for all of the additives. A combination of rigid and soft particles could simultaneously enhance both the tensile properties and the fracture toughness, which cannot be achieved by the single-phase particles independently., Competing Interests: The authors declare no conflict of interest.

The authors report the third-harmonic generation, nonlinear refraction, and nonlinear absorption in HgS quantum dot (QD) suspensions and films using the nanosecond and femtosecond pulses. High conversion efficiency (7 × 10 -4 ) towards the third harmonic (TH) of the 900-1700 nm, 150 fs laser in the thin (70 nm) films containing HgS QDs deposited on the glass substrates is obtained. The authors analyze spectral dependencies of the TH, nonlinear refractive indices, and nonlinear absorption coefficients of QDs in the 500-1700 nm range and discuss the relation between the TH process and the low-order nonlinear optical properties of these quantum dots.

Tungsten trioxide (WO 3 ) is a well-known electrochromic material with a wide band gap, while rhenium trioxide (ReO 3 ) is a "covalent metal" with an electrical conductivity comparable to that of pure metals. Since both WO 3 and ReO 3 oxides have perovskite-type structures, the formation of their solid solutions (ReO 3 -WO 3 or Re x W 1- x O 3 ) can be expected, which may be of significant academic and industrial interest. In this study, layered WO 3 /ReO 3 , ReO 3 /WO 3 , and mixed ReO 3 -WO 3 thin films were produced by reactive DC magnetron sputtering and subsequent annealing in air at 450 °C. The structure and properties of the films were characterized by X-ray diffraction, optical spectroscopy, Hall conductivity measurements, conductive atomic force microscopy, scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoemission spectroscopy. First-principles density functional theory calculations were performed for selected compositions of Re x W 1- x O 3 solid solutions to model their crystallographic structure and electronic properties. The calculations predict metallic conductivity and tetragonal distortion of solid solutions in agreement with the experimental results. In contrast to previously reported methods, our approach allows us to produce the WO 3 -ReO 3 alloy with a high Re content (>50%) at moderate temperatures and without the use of high pressures., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

LaOCl doped with 0-10 mol% Cr was synthesized by thermal decomposition of chlorides. X-ray diffraction (XRD) analysis revealed that incorporation of chromium results in a decrease of the lattice parameter a and a simultaneous increase of the lattice parameter c . The local structure of chromium ions was studied with X-ray photoelectron (XPS), X-ray absorption (XANES), multifrequency electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) spectroscopy techniques. It was determined that synthesis in oxidizing atmosphere promotes the incorporation of chromium ions predominantly in the 5+ oxidation state. Changes of chromium oxidation state and local environment occur after a subsequent treatment in reducing atmosphere. Spin-Hamiltonian (SH) parameters for a Cr 5+ and two types of Cr 3+ centers in LaOCl were determined from the EPR spectra simulations.