Search

Biomass-coal blending combustion is an effective method for utilizing biomass; however, its pollutant emission requires attention. Herein, the effect of biomass-coal blending combustion on lead (Pb) transformation was explored. Combustion experiments were conducted in a fixed-bed reactor, using coal, corn stalk, rice stalk, bamboo flour and their mixtures as fuels, at 1000, 1100, 1200 and 1300 °C. The Pb release ratios were determined by measuring its content in the fuels and solid-phase combustion products. The distribution of Pb forms was analyzed using sequential chemical extraction. The results indicate that blending combustion significantly enhanced the release of Pb. At blending ratio 1:1, the release ratios increased by 1.54-27.2%, 5.30-15.6%, and 2.31-7.76% at 1000, 1100, and 1200 °C, respectively. The potassium (K) components in biomass, mainly KCl and K 2 CO 3 , had a significant promoting effect on Pb release. K compounds facilitated the release of residual Pb through reactions with aluminosilicates. The promotion effect weakened as the temperature increased due to the faster evaporation rate of K. When the mass fractions of K in the fuels were equal, K 2 CO 3 exhibited a stronger promoting effect. HCl had minimal impact on the transformation of Pb. The results are helpful for optimizing the combination of biomass and coal to control Pb emission from the blending combustion source., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Exploring arsenic (As) transformation during coal combustion is beneficial for reducing its pollution. Herein, combustion experiments were developed at 1100-1300 °C in a fixed-bed experimental system with 25 types of coal samples. The occurrences of As in coal and combustion products were characterized. All the original forms of As in coal were found to be unstable during combustion. As retained in ash existed as water-soluble and ion-exchangeable and residual forms, but only as residual form at combustion temperature above 1200 °C. The distribution of As in gaseous and solid combustion products varied widely by coal types, which resulted from the coupling effects of multi-minerals in coal. Co-combustion experiments were conducted using As model compounds and pure minerals, by which the interaction of Ca, Fe, Si and Al minerals to retain As was elucidated. The As transformation during coal combustion was primarily attributed to the coupling action of Ca, Fe, Si and Al minerals in coal. As a result, As was retained as Ca-Si-Al-As and Fe-Si-Al-As composite salts in the ash, which have little environmental hazard. Utilizing the coupling effects of multi-minerals during combustion help reduce As pollution from coal-fired plants., (Copyright © 2022 Elsevier B.V. All rights reserved.)