Search

A commercial TiO2 sample, used as received or hydrothermally treated to increase surface hydroxylation, has been functionalized by surface modification with hexadecyltrimethoxysilane. The anchoring of the silane has been characterized by FTIR and solid-state NMR spectroscopies, and the grafting density was determined by thermogravimetric and N2 physisorption analyses. The silane moieties induce a partial decrease of the shielding of the valence electrons of the Ti ions at the surface, and a local modification of their crystal field, as demonstrated by XPS and UV-vis spectroscopy, respectively. The changes in coordination and the produced oxygen vacancies result in the formation of Ti3+ defects localized in the sub-surface region, as revealed by EPR spectroscopy. These paramagnetic centers are stabilized in the silanized samples, as the electron transfer to O2 is efficiently inhibited even under UV irradiation. However, the amount of Ti3+ centers appears to be correlated with the singlet oxygen (1O2) formation rate. Accordingly, epoxidation of limonene under UV light, chosen as a model photocatalytic reaction triggered by 1O2, occurred with higher selectivity when TiO2 was silanized and upon simultaneous NIR irradiation. These evidences suggest that in the silanized sample 1O2 may be generated through Förster-type energy transfer from excited sub-surface Ti3+ centers., (© 2024 Wiley‐VCH GmbH.)

We present a protocol for the on-surface synthesis of polyboroxine molecules derived from boroxine molecules precursors. This process is promoted by oxygen species present on the Au(111) surface: oxygen atoms facilitate the detachment of naphthalene units of trinaphthyl-boroxine molecules and bridge two unsaturated boroxine centers to form a boroxine-O-boroxine chemical motif. X-ray spectroscopic characterization shows that, as the synthesis process proceeds, it progressively tunes the electronic properties of the interface, thus providing a promising route to control the electron level alignment., (© 2024 Wiley-VCH GmbH.)

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F 430 and P450nor co-factors, with their reduced Ni I - and Fe III -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario., Competing Interests: The authors declare no conflict of interest., (© 2022 The Authors. Angewandte Chemie published by Wiley-VCH GmbH.)

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F 430 and P450nor co-factors, with their reduced Ni I - and Fe III -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Self-metalation is a promising route to include a single metal atom in a tetrapyrrolic macrocycle in organic frameworks supported by metal surfaces. The molecule-surface interaction may provide the charge transfer and the geometric distortion of the molecular plane necessary for metal inclusion. However, at a metal surface the presence of an activation barrier can represent an obstacle that cannot be compensated by a higher substrate temperature without affecting the layer integrity. The formation of the intermediate state can be facilitated in some cases by oxygen pre-adsorption at the supporting metal surface, like in the case of 2H-TPP/Pd(100). In such cases, the activation barrier can be overcome by mild annealing, yielding the formation of desorbing products and of the metalated tetrapyrrole. We show here that the self-metalation of 2H-TPP at the Pd(100) surface can be promoted already at room temperature by the presence of an oxygen gas phase at close-to-ambient conditions via an Eley-Rideal mechanism., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Molecular interfaces formed between metals and molecular compounds offer a great potential as building blocks for future opto-electronics and spintronics devices. Here, a combined theoretical and experimental spectro-microscopy approach is used to show that the charge transfer occurring at the interface between nickel tetraphenyl porphyrins and copper changes both spin and oxidation states of the Ni ion from [Ni(II), S = 0] to [Ni(I), S = 1/2]. The chemically active Ni(I), even in a buried multilayer system, can be functionalized with nitrogen dioxide, allowing a selective tuning of the electronic properties of the Ni center that is switched to a [Ni(II), S = 1] state. While Ni acts as a reversible spin switch, it is found that the electronic structure of the macrocycle backbone, where the frontier orbitals are mainly localized, remains unaffected. These findings pave the way for using the present porphyrin-based system as a platform for the realization of multifunctional devices where the magnetism and the optical/transport properties can be controlled simultaneously by independent stimuli., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

The water-splitting photo-catalysis by carbon nitride heterocycles has been the subject of recent theoretical investigations, revealing a proton-coupled electron transfer (PCET) reaction from the H-bonded water molecule to the CN-heterocycle. In this context, a detailed characterization of the water-catalyst binding configuration becomes mandatory in order to validate and possibly improve the theoretical modeling. To this aim, we built a well-defined surface-supported water/catalyst interface by adsorbing water under ultra-high vacuum (UHV) conditions on a monolayer of melamine grown on the Cu(111) surface. By combining X-ray photoemission (XPS) and absorption (NEXAFS) spectroscopy we observed that melamine adsorbed onto copper is strongly tilted off the surface, with one amino group dangling to the vacuum side. The binding energy (BE) of the corresponding N 1s component is significantly higher compared to other N 1s contributions and displays a clear shift to lower BE as water is adsorbed. This finding along with density functional theory (DFT) results reveals that two adjacent melamine molecules concurrently work for stabilizing the H-bonded water-catalyst complex: one melamine acting as a H-donor via the amino-N (NH⋯OHH) and another one as a H-acceptor via the triazine-N (C[double bond, length as m-dash]N⋯HOH)., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The self-assembly of leucoquinizarin molecules on Au(111) surfaces is shown to be characterized by the molecules mostly being in their keto-enolic tautomeric form, with evidence of their temporary switching to other tautomeric forms. This reveals a metastable chemistry of the assembled molecules, to be considered for their possible employment in the formation of more complex hetero-organic interfaces.

We performed a theoretical investigation on the influence of electronic correlation effects on the B1s NEXAFS spectrum of boronic acid derivatives, namely, boric acid [B(OH) 3 ], phenyl boronic acid (PBA), and 1,4-phenyl diboronic acid (PDBA), employing different computational schemes of increasing complexity, ranging from the purely one-electron scheme based on the transition potential method of density functional theory (DFT-TP), time-dependent DFT (TDDFT), and multiconfigurational self-consistent field (MCSCF). We also report experimental measurements of the B1s NEXAFS spectra of the aforementioned molecules together with the high-resolution C1s NEXAFS spectrum of PBA. We demonstrate that due to the shallow B1s core energy levels compared to C, O, and N, the inclusion of static correlation effects, which can be incorporated by using multireference approaches to excited states, assumes a decisive role in reconciling experiment and theory on B1s core-electron excitation energies and oscillator strengths to valence states. This claim is corroborated by the good agreement that we find between the DFT-TP calculated C1s NEXAFS spectrum and that experimentally measured for PBA and by the failure of both DFT-TP and TDDFT approaches with a selection of xc functionals kernels to properly describe the B1s NEXAFS spectrum of PBA and PDBA, at variance with the good agreement with the experiment that is found by employing the MCSCF wave function approach.

Crown ethers, assembled into a regular 2D array via a chemical guest-host recognition process, have been successfully employed to trap sodium atoms on a surface, under ultra-high vacuum conditions., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The synthesis and preliminary characterization of a boron-based 2D framework are presented. The peculiar electronic and morphological properties of this compound, together with its facile formation process, enable it to be used as a novel smart material for the design of electronic devices.

We performed a combined experimental and theoretical study of the assembly of phenylboronic acid on the Au(111) surface, which is found to lead to the formation of triphenylboroxines by spontaneous condensation of trimers of molecules. The interface between the boroxine group and the gold surface has been characterized in terms of its electronic properties, revealing the existence of an ultra-fast charge delocalization channel in the proximity of the oxygen atoms of the heterocyclic group. More specifically, the DFT calculations show the presence of an unoccupied electronic state localized on both the oxygen atoms of the adsorbed triphenylboroxine and the gold atoms of the topmost layer. By means of resonant Auger electron spectroscopy, we demonstrate that this interface state represents an ultra-fast charge delocalization channel. Boroxine groups are among the most widely adopted building blocks in the synthesis of covalent organic frameworks on surfaces. Our findings indicate that such systems, typically employed as templates for the growth of organic films, can also act as active interlayers that provide an efficient electronic transport channel bridging the inorganic substrate and organic overlayer.