Search

Self-assembly of 3D interiors and iridescence properties of poly(β-hydroxybutyric acid-co-β-hydroxyvaleric acid) (PHBV) periodic crystals are examined using microcopy techniques and microbeam X-ray diffraction. Morphology of PHBV can be tailored by crystallizing in presence of poly(vinyl acetate) (PVAc) or poly(trimethylene adipate) (PTA) for displaying desired periodicity patterns. The regular alternate-layered lamellae of banded PHBV crystal aggregates, resembling the structures the natural mineral moonstone or nacre, are examined to elaborate the origin of light interference and formation mechanisms of periodic lamellar aggregation of PHBV spherulites. By using PHBV as a convenient model and the crystal diffraction data, this continuing work demonstrates unique methodology for effectively studying the periodic assembly in widely varying polymers with similar aggregates. Grating structures in periodically assembled polymer crystals can be tailored for microstructure with orderly periodicity.

This work used several model arylate polymers with the number of methylene segment n = 3, 9, 10, and 12, which all crystallized to display similar types of periodically banded spherulites at various T c and kinetic factors. Universal mechanisms of nano- to microscale crystal-by-crystal self-assembly to final periodic aggregates showing alternate birefringence rings were probed via 3D dissection. The fractured interiors of the birefringent-banded poly(decamethylene terephthalate) (PDT) spherulites at T c = 90 °C revealed multi-shell spheroid bands composed of perpendicularly intersecting lamellae bundles, where each shell (measuring 4 μm) was composed of the interior tangential and radial lamellae, as revealed in the SEM results, and its shell thickness was equal to the optical inter-band spacing (4 μm). The radial-oriented lamellae were at a roughly 90° angle perpendicularly intersecting with the tangential ones; therefore, the top-surface valley band region appeared to be a submerged "U-shape", where the interior radial lamellae were located directly underneath. Furthermore, the universal self-assembly was proved by collective analyses on the three arylate polymers.

An immiscible blend of poly(hydroxy ether of bisphenol-A) (phenoxy) and poly(1,4-butylene terephthalate) (PBT) with phase separation was observed in as-blended samples. The compatibilization of phenoxy/PBT blends can be promoted through chemical exchange reactions of phenoxy with PBT upon annealing. The annealed phenoxy/PBT blends had a homogeneous phase with a single T g that could be enhanced by annealing at 260 °C. Infrared (IR) spectroscopy demonstrated that phase homogenization could be promoted by annealing the phenoxy/PBT blend, where alcoholytic exchange occurred between the dangling hydroxyl group (⁻OH) in phenoxy and the carbonyl group (C=O) in PBT in the heated blends. The alcoholysis reaction changed the aromatic linkages to aliphatic linkages in the carbonyl groups, which initially led to the formation of a graft copolymer of phenoxy and PBT with an aliphatic/aliphatic carbonyl link. The progressive alcoholysis reaction resulted in the transformation of the initial homopolymers into block copolymers and finally into random copolymers, which promoted phase compatibilization in blends of phenoxy with PBT. As the amount of copolymers increased upon annealing, the crystallization of PBT was inhibited by alcoholytic exchange in the blends.

A novel nanoarchitecture-reinforced poly(lactic acid) (PLA) nanocomposite was prepared using multi-walled carbon nanotube (MWCNT)-grafted silica nanohybrids as reinforcements. MWCNT-grafted silica nanohybrids were synthesized by the generation of silica nanoparticles on the MWCNT surface through the sol-gel technique. This synthetic method involves organo-modified MWCNTs that are dispersed in tetrahydrofuran, which incorporates tetraethoxysilane that undergoes an ultrasonic sol-gel process. Gelation yielded highly dispersed silica on the organo-modified MWCNTs. The structure and properties of the nanohybrids were established using 29 Si nuclear magnetic resonance, Raman spectroscopy, wide-angle X-ray diffraction, thermogravimetric analysis, and transmission electron microscopy. The resulting MWCNT nanoarchitectures were covalently assembled into silica nanoparticles, which exhibited specific and controllable morphologies and were used to reinforce biodegradable PLA. The tensile strength and the heat deflection temperature (HDT) of the PLA/MWCNT-grafted silica nanocomposites increased when the MWCNT-grafted silica was applied to the PLA matrix; by contrast, the surface resistivity of the PLA/MWCNT-grafted silica nanocomposites appeared to decline as the amount of MWCNT-grafted silica in the PLA matrix increased. Overall, the reinforcement of PLA using MWCNT-grafted silica nanoarchitectures was efficient and improved its mechanical properties, heat resistance, and electrical resistivity., Competing Interests: The authors declare no conflict of interest.

This work concerns the enhancement in the compatibility of blends of poly (1,4-butylene adipate) (PBA) with poly (hydroxy ether of bisphenol-A) (phenoxy) via alcoholytic exchange. Results on the thermal behavior and morphology show that the blended PBA/phenoxy system exhibits a homogeneous phase and a composition-dependent glass transition temperature (T g ). The interaction parameter ( χ 12 ) of PBA/phenoxy blends was calculated using the melting point depression method and was found to be -0.336. However, the compatibilization of PBA/phenoxy blends can be enhanced by chemical exchange reactions between PBA and phenoxy upon annealing. Annealed PBA/phenoxy blends were found to have a homogeneous phase with a higher T g than that of the blended samples, and a smooth surface topography that could be improved by annealing at high temperature. The results of this investigation demonstrate that promotional phase compatibilization in the PBA/phenoxy blend can only be obtained upon thermal annealing, thus causing transreactions to occur between the dangling -OH of the phenoxy and the ester functional groups in PBA. Extensive transreactions cause alcoholytic exchange between the PBA and phenoxy to form a network, thus reducing the mobility of the polymer chain. Finally, the crystallinity of PBA decreased as the degree of transreaction in the blends increased., Competing Interests: The authors declare no conflict of interest.

The sol-gel technique was used to prepare epoxy/silica nano-hybrids. The thermal characteristics, curing kinetics and structure of epoxy/silica nano-hybrids were studied using differential scanning calorimetry (DSC), 29 Si nuclear magnetic resonance (NMR) and transmission electron microscopy (TEM). To improve the compatibility between the organic and inorganic phases, a coupling agent was used to modify the diglycidyl ether of bisphenol A (DGEBA) epoxy. The sol-gel technique enables the silica to be successfully incorporated into the network of the hybrids, increasing the thermal stability and improving the mechanical properties of the prepared epoxy/silica nano-hybrids. An autocatalytic mechanism of the epoxy/SiO₂ nanocomposites was observed. The low reaction rate of epoxy in the nanocomposites is caused by the steric hindrance in the network of hybrids that arises from the consuming of epoxide group in the network of hybrids by the silica. In the nanocomposites, the nano-scale silica particles had an average size of approximately 35 nm, and the particles were well dispersed in the epoxy matrix, according to the TEM images.

The oppositely oriented lamellae in ridge and valley bands of ring-banded spherulites in biodegradable poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) interacting with amorphous poly(vinyl acetate) (PVAc) were examined using polarized-light optical, scanning electron, and atomic-force microscopy techniques (POM, SEM, AFM). Solvent-etching and fracturing were utilized for probing the interior morphology of the large-size ring-banded spherulites in PHBV/PVAc (70/30) blend [T(c) = 110 °C] films or thick bulk of various thicknesses. SEM analysis revealed that dual ridges of two opposite-oriented lamellae correspond to two-color bands (yellow and blue) of successive rings in POM micrographs. Fracture of thick blend samples further exposed that interior 3D spherulites were composed of sheath-kebab (similar to corrugated board) lamellae of two mutually perpendicular orientations.

Various amounts of multiwalled carbon nanotubes [MWNTs] were embedded into polyetherimide [PEI] to form PEI/MWNT composites, and their dielectric properties were measured at 1 MHz. The Lichtenecker mixing rule was used to find a reasonable dielectric constant for the MWNTs used in this study. The dielectric constants of the developed composites were significantly increased, and the loss tangents were significantly decreased as 2.0 wt.% (Ba0.8Sr0.2)(Ti0.9Zr0.1)O3 ceramic powder [BSTZ] was added to the PEI/MWNTs to form PEI/MWNT/BSTZ composites. The Lichtenecker and Yamada mixing rules were used to predict the dielectric constants of the PEI/MWNT and PEI/MWNT/BSTZ composites. Equivalent electrical conduction models of both composites were established using the two mixing rules. In addition, the theoretical bases of the two mixing rules were used to explain the measured results for the PEI/MWNT and PEI/BSTZ/MWNT composites.