Search

The use of eco-friendly natural fiber-reinforced polymer composites is rapidly expanding across diverse sectors. The rapid spread of water hyacinth disrupts aquatic ecosystems by modifying the pH of water and salinity in Bangladesh. This work investigated on the impact of incorporating both untreated and chemically treated water hyacinth fibers into polypropylene (PP). Untreated water hyacinth (UWH) powder was treated with an alkaline solution, producing mercerized water hyacinth (MWH). MWH was further oxidized to yield oxidized water hyacinth (OWH). Analysis of attenuated total reflection-fourier transform infrared (ATR-FTIR) spectra of UWH, MWH and OWH confirmed cellulose modification. The UWH and OWH were taken in varying contents (1, 2.5, 5, 7.5, and 10 wt%) and added to PP to make UWH-PP and OWH-PP composites using compression molding technique. The 1 % fiber content OWH-PP composites exhibited enhanced tensile strength, elongation, and impact strength compared to UWH-PP composites. Enhanced mechanical properties in OWH-PP composites suggested that benzoyl peroxide treatment improves interfacial adhesion. Morphological analysis of the OWH-PP composite showed better interfacial bonding between water hyacinth and PP than that of the UWH-PP composite. Thermogravimetric analysis (TGA) depicted the thermal stability of the UWH-PP and OWH-PP composites. The chemical reaction of cellulose monomer was further studied with DFT/B3LYP level of theory using two different basis sets 6-31+G(d, p) and cc-pVTZ. The calculated vibrational spectra of the untreated, mercerized and oxidized cellulose monomer agree well with the ATR-FTIR spectra, confirming chemical modification. DFT calculations of thermodynamic properties revealed the feasibility of the reactions. Electronic property (NBO charge) indicated charge transfer and structural changes during chemical modification., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:The authors have disclosed no conflicts of interest. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Carbohydrate analogs are an important, well-established class of clinically useful medicinal agents that exhibit potent antimicrobial activity. Thus, we explored the various therapeutic potential of methyl α-D-mannopyranoside (MαDM) analogs, including their ability to synthesize and assess their antibacterial, antifungal, and anticancer properties; additionally, molecular docking, molecular dynamics simulation, and ADMET analysis were performed. The structure of the synthesized MαDM analogs was ascertained by spectroscopic techniques and physicochemical and elemental analysis. In vitro antimicrobial activity was assessed and revealed significant inhibitory effects, particularly against gram-negative bacteria along with the prediction of activity spectra for substances (PASS). Concurrently, MαDM analogs showed good results against antifungal pathogens and exhibited promising anticancer effects in vitro , demonstrating dose-dependent cytotoxicity against Ehrlich ascites carcinoma (EAC) cancer cells while sparing normal cells from compound 5 , with an IC 50 of 4511.65 µg/mL according to the MTT colorimetric assay. A structure-activity relationship (SAR) study revealed that hexose combined with the acyl chains of decanoyl (C-10) and benzenesulfonyl (C 6 H 5 SO 2 -) had synergistic effects on the bacteria and fungi that were examined. Molecular docking was performed against the Escherichia coli (6KZV) and Candida albicans (1EAG) proteins to acquire insights into the molecular interactions underlying the observed biological activities. The docking results were further supported by 100 ns molecular dynamics simulations, which provided a dynamic view of the stability and flexibility of complexes involving MαDM and its targets. In addition, ADMET analysis was used to evaluate the toxicological and pharmacokinetic profiles. Owing to their promising drug-like properties, these MαDM analogs exhibit potential as prospective therapeutic candidates for future development., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

Eco-friendly dyeing of jute packaging fabrics was evaluated using aqueous extraction of factory tea ( Camellia sinensis) wastes. Jute and factory tea wastes are available in Bangladesh and jute bags are used for packaging of various exportable agricultural commodities. The extract of factory tea waste (FTW) is dark coffee colored and it was characterized by attenuated total reflection-fourier transform infrared (ATR-FTIR) and microbial analysis. Nontoxic, non-allergic and eco-friendly natural dyeing process of jute packaging fabrics using extract of FTW were developed and optimized. Metal mordants 10 % on the weight of fabric was used to get the fastness properties of dyed jute fabric. The methods of application of mordants were pre-mordanting, simultaneous or meta-mordanting and post-mordanting. The color fastness and tensile properties were measured for all jute packaging fabrics and it is found that the dyed jute packaging fabrics showed a slight decrease in tensile breaking force (N) than undyed jute packaging fabric. The highest color fastness obtained with the meta mordanting method with ferrous sulfate mordant in a shade of dark coffee. The results of the color fastness for light and washing showed an excellent value of grade 4-5., Competing Interests: The authors declare that they have no conflict of interest., (© 2024 The Authors. Published by Elsevier Ltd.)

The antioxidant activity of tea leaves extract is a widely researched topic. Tea leaves, particularly those from the Camellia sinensis Linn plant, have garnered attention due to their potential health benefits attributed to their antioxidant properties. Antioxidants are compounds that can neutralize harmful free radicals in the body, which can damage cells and contribute to various health issues, including cancer, cardiovascular diseases, and aging. In this research, the matured tea leaves which has been considered as agricultural waste in Moulovibazar area of Bangladesh have been investigated as a potential source of antioxidant. Methanol was used as solvent for the extraction of antioxidant. DPPH (1,1-diphenyl-2-picryl hydrazyl) scavenging free radical assay method was used to assess the antioxidant activity of the extracts and ascorbic acid was used as positive control. Gas chromatography with mass spectrometric (GC-MS) analysis method was conducted on this extract to investigate the principal components. The half inhibitory concentration (IC 50 ) values of methanol extract and ascorbic acid were found to be 69.51 μg/mL and 10.70 μg/mL, respectively. Caffeine is the main compound (74.47%) among the eight bioactive compounds was identify and quantified by GC-MS., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Published by Elsevier Ltd.)

The utilization of natural fiber reinforced polymer composites is growing fast in numerous sectors. In this study, the effect of the addition of short date palm mat (DPM) fibers in polystyrene matrix on the physico-mechanical and thermal properties were studied. Short DPM fiber reinforced polystyrene composites were produced by compression moulding process and the fiber content was 5, 10, 15, 20 and 25 wt%. Physico-mechanical and thermal properties were examined. Scanning electron microscopy (SEM) and Fourier-transform infrared (FT-IR) analysis of the composites were also done. The findings from the investigates exposed that the composites with 10 % fiber content showed improved mechanical and thermal characteristics as compared to other composites. The morphological analysis also supported the results where good interfacial bonding among fiber and polystyrene matrix was found for the composites with 10 % fiber content. The optimized (10 % fiber content) composites were exposed to gamma radiation (2.5-7.5 kGy) and the best result was found at 5.0 kGy radiation dose. Degradation of gamma irradiated composites was conducted in four different media such as water, acid, base, and brine., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Plastic-based food-contact materials are potentially threatening the environment and public health by releasing toxic heavy metals. This study aimed to identify the types of plastic commonly used in Bangladesh as food-contact materials (FCMs) and assess the migration of heavy metals from these FCMs. Plastic types were identified using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR), and 25 samples were selected based on the category, including Polyethylene Terephthalate (PET), Polyethylene (PE), Polypropylene (PP), Polystyrene (PS), and Polycarbonate (PC). Distilled water, 3% acetic acid, and 15% ethanol were used as food simulants to assess the overall migration of chemicals at 70 °C for 2 h. The concentrations of heavy metals (Pb, Cd, Hg, Cr, and Sb) were analyzed using an Atomic Absorption Spectrophotometer (AAS). Results revealed that the highest overall migration occurred in coffee cups measuring 3.50 ± 0.17 mg/kg (using water simulant) and in yogurt containers with a measurement of 9.17 ± 0.1 mg/kg (using 3% acetic acid). The highest concentrations of Pb, Cd, Hg, Cr, and Sb were found in PP-2 (0.45 ± 0.01 mg/kg), PP-2 (0.36 ± 0.01 mg/kg), PC-5 (0.27 ± 0.01 mg/kg), PET-2 (0.12 ± 0.01 mg/kg), and PET-1 (0.09 ± 0.01 mg/kg), respectively. The concentration of heavy metals migrated from the containers is likely to induce a health risk due to bioaccumulation from long-term ingestion of food packaged in them. The findings of this study added knowledge about harmful heavy metals leached from the FCMs in Bangladesh., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors.)

Background: This study aimed to identify a set of newborn signal functions (NSFs) that can categorize health facilities and assist policymakers and health managers in appropriately planning and adequately monitoring the progress and performance of health facilities delivering newborn health care in Bangladesh and similar low-income settings., Methods: A modified Delphi method was used to identify a set of NSFs and a cross-sectional health facility assessment among the randomly selected facilities was conducted to test them in public health facilities in Bangladesh. In the modified Delphi approach, three main steps of listing, prioritizing, and testing were followed to identify the set of NSFs. Then, to finalize the set of NSFs and its variables, a total of five Delphi workshops and three rounds of Delphi surveys were conducted. Finally, 205 public health facilities located in 41 randomly selected districts were assessed for the availability and readiness of finalized NSFs using the updated tool of Bangladesh Health Facility Survey (BHFS) 2017., Results: Twenty NSFs were identified and finalized, nine of which were categorized as primary NSFs, 13 as basic NSFs, 18 as comprehensive NSFs, and 20 as advanced NSFs. Almost all district hospitals (DHs), Upazila health complexes (UHCs,) and maternal and child welfare centres (MCWCs) performed the primary NSFs in the last three months. However, around one-third of the union health and family welfare centres (UH&FWCs) and very few community clinics (CCs) performed them during the same period. The basic, comprehensive, and advanced NSF readiness was inadequate and inappropriate across all types of facilities, including DHs and UHCs., Conclusions: In the absence of internationally or nationally agreed-upon NSFs to measure a health facility's service availability and readiness for providing newborn care, this study becomes the first to identify and finalize a set of NSFs and to incorporate relevant variables in the health facility assessment tool which can be used to monitor the availability and readiness of a newborn care facility. The identified NSFs can also be adapted for the countries with similar contexts and can serve as a standard base to determine a global set of NSFs., Competing Interests: Disclosure of interest: The authors completed the ICMJE Disclosure of Interest Form (available upon request from the corresponding author) and disclose no relevant interests., (Copyright © 2022 by the Journal of Global Health. All rights reserved.)

Introduction: There is a set of globally accepted and nationally adapted signal functions for categorising health facilities for maternal services. Newborn resuscitation is the only newborn intervention which is included in the WHO recommended list of emergency obstetric care signal functions. This is not enough to comprehensively assess the readiness of a health facility for providing newborn services. In order to address the major causes of newborn death, the Government of Bangladesh has prioritised a set of newborn interventions for national scale-up, the majority of which are facility-based. Effective delivery of these interventions depends on a core set of functions (skills and services). However, there is no standardised and approved set of newborn signal functions (NSFs) based on which the service availability and readiness of a health facility can be assessed for providing newborn services. Thus, this study will be the first of its kind to identify such NSFs. These NSFs can categorise health facilities and assist policymakers and health managers to appropriately plan and adequately monitor the progress and performance of health facilities delivering newborn healthcare., Methods and Analysis: We will adopt the Delphi technique of consensus building for identification of NSFs and 1-2 indicator for each function while employing expert consultation from relevant experts in Bangladesh. Based on the identified NSFs and signal function indicators, the existing health facility assessment (HFA) tools will be updated, and an HFA survey will be conducted to assess service availability and readiness of public health facilities in relation to the new NSFs. Descriptive statistics (proportion) with a 95% CI will be used to report the level of service availability and readiness of public facilities regarding NSFs., Ethics and Dissemination: Ethical approval was obtained from Research Review and Ethical Review Committee of icddr, b (PR-17089). Results will be disseminated through meetings, seminars, conference presentations and international peer-review journal articles., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2020. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.)

Background: In 2013, an estimated 2.8 million newborns died and 2.7 million were stillborn. A much greater number suffer from long term impairment associated with preterm birth, intrauterine growth restriction, congenital anomalies, and perinatal or infectious causes. With the approaching deadline for the achievement of the Millennium Development Goals (MDGs) in 2015, there was a need to set the new research priorities on newborns and stillbirth with a focus not only on survival but also on health, growth and development. We therefore carried out a systematic exercise to set newborn health research priorities for 2013-2025., Methods: We used adapted Child Health and Nutrition Research Initiative (CHNRI) methods for this prioritization exercise. We identified and approached the 200 most productive researchers and 400 program experts, and 132 of them submitted research questions online. These were collated into a set of 205 research questions, sent for scoring to the 600 identified experts, and were assessed and scored by 91 experts., Results: Nine out of top ten identified priorities were in the domain of research on improving delivery of known interventions, with simplified neonatal resuscitation program and clinical algorithms and improved skills of community health workers leading the list. The top 10 priorities in the domain of development were led by ideas on improved Kangaroo Mother Care at community level, how to improve the accuracy of diagnosis by community health workers, and perinatal audits. The 10 leading priorities for discovery research focused on stable surfactant with novel modes of administration for preterm babies, ability to diagnose fetal distress and novel tocolytic agents to delay or stop preterm labour., Conclusion: These findings will assist both donors and researchers in supporting and conducting research to close the knowledge gaps for reducing neonatal mortality, morbidity and long term impairment. WHO, SNL and other partners will work to generate interest among key national stakeholders, governments, NGOs, and research institutes in these priorities, while encouraging research funders to support them. We will track research funding, relevant requests for proposals and trial registers to monitor if the priorities identified by this exercise are being addressed.