Search

Purpose: Very high-power short-duration (vHPSD) ablation creates shallower lesions, potentially reducing efficacy. This study aims to identify factors leading to insufficient lesions during pulmonary vein antral isolation (PVAI) with vHPSD-ablation and to develop an optimized PVAI strategy using this technology., Methods: PVAI was performed on 41 atrial fibrillation patients using vHPSD-ablation (90 W/4 s). Lesion parameters were recorded and analyzed to identify predictors of insufficient lesions. An optimized PVAI strategy, based on these predictors, was tested in subsequent 42 patients., Results: In total, 3099 RF-applications, including 103(3.3%) insufficient lesions, were analyzed. First-pass PVAI was achieved in 19/40(47.5%) right PVs and 24/41(58.5%) left PVs. Multivariate analysis identified significant predictors of insufficient lesions: local largest bipolar voltage (Bi-V), average contact force, baseline impedance, impedance drop, temperature rise, inter-lesion distance (ILD), and anatomical location (carina or not). An ILD:4-6 mm increased the risk of insufficient lesions 2.2-fold, and lesions at the carina increased it 3.6-fold for both ILD < 4 mm and ILD:4-6 mm. Local largest Bi-V was the strongest predictor for insufficient lesions. The optimized PVAI approach, utilizing vHPSD-ablation with an ILD < 4 mm in non-carinal areas with Bi-V < 4 mV, and high-power ablation-index guided ablation (HPAI, 50 W, ablation-index:450-550) in remaining areas, achieved first-pass PVAI in 92.7% of right PVs and 88.1% of left PVs, using vHPSD-ablation in approximately 65% of total RF-applications. The optimized PVAI achieved significantly higher first-pass PVI rate (p < .0001) with shorter ablation time (p = .04)., Conclusion: Appropriate use of vHPSD and HPAI, based on local largest Bi-V and anatomical information, may achieve high first-pass PVAI rates in shorter ablation time with minimal energy delivery., (© 2024 Wiley Periodicals LLC.)

Background: The optimal temperature control strategy in extracorporeal cardiopulmonary resuscitation (ECPR) patients is unknown, and several trials have reported conflicting results regarding its effectiveness. We aimed to conduct a systemic review and network meta-analysis (NMA) to assess the efficacy of temperature control in ECPR patients., Methods: Database searching of studies reporting data on temperature control strategy during ECPR in MEDLINE, EMBASE, Scopus, and Cochrane Library was performed. Primary outcomes were overall survival and neurological outcome. Pairwise meta-analysis and Bayesian NMA were performed on studies comparing outcomes among groups of moderate hypothermia (32-34 °C), mild hypothermia (34.1-36 °C) and normothermia (36.1-37.5 °C)., Results: Nineteen retrospective studies were included (5622 patients). Statistically significant differences in good neurological outcome were observed in the direct comparison of moderate hypothermia and mild hypothermia (OR, 1.73; 95 % CI: 1.07-2.81) as well as moderate hypothermia and normothermia (OR, 2.14; 95 % CI: 1.24-3.67), but no significant differences were found in the NMA result. There was no difference in either survival outcome or the incidence of bleeding complications among any groups according to direct or indirect analysis., Conclusions: Direct evidence suggests that moderate hypothermia might be associated with improved neurological outcomes in ECPR patients. However, no significant differences in survival outcomes were observed in either the direct or NMA results. Given the lower level of the evidence, interpretation should be made with caution., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

This paper provides an overview of the study of optical resonant cavity stability, focusing on the relevant principles, key technological advances, and applications of optical resonant cavities in a variety of high-precision measurement techniques and modern science and technology. Firstly, the vibration characteristics, thermal noise, and temperature characteristics of the reference cavity are presented. Subsequently, the report extensively discusses the advances in key technologies such as mechanical vibration isolation, thermal noise control, and resistance to temperature fluctuations. These advances not only contribute to the development of theory but also provide innovative solutions for practical applications. Typical applications of optical cavities in areas such as laser gyroscopes, high-precision measurements, and gravitational wave detection are also discussed. Future research directions are envisioned, emphasising the importance of novel material applications, advanced vibration isolation technologies, intelligent temperature control systems, multifunctional integrated optical resonator design, and deepening theoretical models and numerical simulations.

Aim: Temperature control is a complex bundled intervention; the synergistic impact of each individual component is ill defined and underreported. Resultantly, the influence of parameter optimization on temperature control's overall neuroprotective effect remains poorly understood. To characterize variability in temperature control parameters and barriers to short pre-induction and induction times, we surveyed sites enrolling in an ongoing multicenter clinical trial., Methods: This was a cross-sectional, survey study evaluating temperature control practices within the Influence of Cooling duration on Efficacy in Cardiac Arrest Patients (ICECAP) trial (NCT04217551). A 23-question web-based survey (Qualtrics) was distributed to the site principal investigators by email. Respondents were asked about site practices pertaining to the use of temperature control, including the request to upload individual institutional protocols. Open-ended responses were analyzed qualitatively by categorizing responses into identified themes. To complement survey level data, records pertaining to the quality of temperature control were extracted from the ICECAP trial database., Results: The survey response rate was 75% (n = 51) including 23.5% (n = 12) survey respondents who uploaded institutional protocols. Most sites reported having institutional protocols for temperature control (n = 41; 80%), including 62.5% (n = 32) who had separate protocols for initiation of temperature control in the emergency department (ED). Fewer sites had protocols specific to sedation or neuromuscular blockade (NMB) management (n = 35, 68.6%). Use of NMB during temperature control induction was variable; 61.7% (n = 29) of sites induced paralysis less than 20% of the time. While most institutional protocols (n = 11, 83.3%) commented on the importance of early initiation of temperature control, this was incongruent with the largest reported barrier, which was clinical nihilism regarding the importance of early temperature control initiation (n = 30, 62.5%). Within the ICECAP trial database, 1 in 2 patients were treated with NMB however, use of NMB and time to initiation of temperature control device varied widely between sites., Conclusion: Amongst ICECAP trial sites, there was significant variability in resources, methods, and barriers for early temperature control initiation. Defining and standardizing high-quality temperature control must be prioritized, as it may impact the interpretation of past and current clinical trial findings., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: ‘The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest. The following conflicts of interest should be reported: SY, RC, RR: support from NIH for ICECAP DCC work scope, PK, RG, RS, WM: support from NIH for ICECAP CCC work scope. Multiple authors are supported by the following grants: UG3HL145269, UH3HL145269, U24HL145272, U24NS100659, U24NS100655 from the National Heart, Lung and Blood Institute (NHLBI) and the National Institute of Neurological Disorders and Stroke (NINDS). The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institutes of Health.’., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This study investigates the growth characteristics of Salmonella enteritidis ( S. enteritidis ) in liquid whole egg under both isothermal and non-isothermal storage conditions to understand the risks associated with inadequate temperature management in the egg industry. Using controlled laboratory simulations, liquid whole egg samples inoculated with S. enteritidis were stored under various isothermal (5, 15, 25, 35, and 45 °C) and non-isothermal conditions (5-10, 15-20, 25-30, 35-40, and 45-50 °C). The growth behavior of the S. enteritidis was analyzed using a two-step predictive modeling approach. First, growth kinetic parameters were estimated using a primary model, and then the effects of temperature on the estimated specific growth rate and lag time were described using a secondary model. Independent growth data under both isothermal and non-isothermal conditions were used to evaluate the models. The results showed that S. enteritidis exhibits different growth characteristics depending on temperature conditions, emphasizing the need for strict temperature control to prevent foodborne illnesses. To address this, a predictive growth model tailored for non-isothermal conditions was developed and validated using experimental data, demonstrating its reliability in predicting S. enteritidis behavior under dynamic temperature scenarios. Additionally, temperature management technologies were proposed and tested to improve food safety during refrigerated storage. This study provides a scientific basis for improving food safety protocols in the egg industry, thereby protecting public health and maintaining consumer confidence amid temperature fluctuations.

Experimental evolution of microbial cells provides valuable information on evolutionary dynamics, such as mutations that contribute to fitness gain under given selection pressures. Although experimental evolution is a promising tool in evolutionary biology and bioengineering, long-term culture experiments under multiple environmental conditions often impose an excessive workload on researchers. Therefore, the development of automated systems significantly contributes to the advancement of experimental evolutionary research. This review presents several specialized devices designed for experimental evolution studies, such as an automated system for high-throughput culture experiments, a culture device that generate a temperature gradient, and an automated ultraviolet (UV) irradiation culture device. The ongoing development of such specialized devices is poised to continually expand new frontiers in experimental evolution research., (© 2024 The Author(s). Development, Growth & Differentiation published by John Wiley & Sons Australia, Ltd on behalf of Japanese Society of Developmental Biologists.)

Organic phase change material is an ideal solution to solve the heat dissipation problem of electronic devices. However, its low thermal conductivity limits its application. To solve this problem, a new porous aluminum skeleton/paraffin composite phase change material (AS-PCM) was prepared. The effects of porosity and porous aluminum skeletons on temperature control performance were explored. The experimental results show that the addition of AS significantly improves the thermal conductivity of organic PCM, and the thermal conductivity of AS-PCM is 32.3-59.6 times higher than that of pure paraffin. In addition, the temperature difference in AS-PCM with 75% porosity is 1-2 °C lower than that of AS-PCM with 85%, and 5-8 °C lower than that of AS-PCM with 95% porosity. The skeleton structure has an impact on the temperature control performance. The Mcc porous aluminum skeleton/paraffin composite phase change material (MAS-PCM) yields the best thermal performance compared with the Fcc porous aluminum skeleton/paraffin composite phase change material (FAS-PCM). The temperature control time of the MAS-PCM heat sink is increased by 5.3-50.8% relative to the FAS-PCM heat sink. The research results provide a novel approach for improving the thermal conductivity of PCMs.

The loop-mediated isothermal amplification (LAMP) is widely used in the laboratory to facilitate rapid DNA or RNA detection with a streamlined operational process, whose properties are greatly dependent on the uniformity and rise rate of temperature in the reaction chambers and the design of the primers. This paper introduces a planar micro-heater equipped with an embedded micro-temperature sensor to realize temperature tunability at a low energy cost. Moreover, a control system, based on the Wheatstone bridge and proportional, integral, and derivative (PID) control, is designed to measure and adjust the temperature of the micro-heater. The maximum temperature rise rate of the designed micro-heater is ≈8 °C s -1 , and it only takes ≈60 s to reach the target temperature. Furthermore, a designed plasmid, containing the B646L gene of African Swine Fever Virus (ASFV), and a set of specific primers, are used to combine with the designed micro-heating system to implement the LAMP reaction. Finally, the lateral flow assay is used to interpret the amplification results visually. This method can achieve highly sensitive and efficient detection of ASFV within 40 min. The sensitivity of this on-chip gene detection method is 8.4 copies per reaction, holding great potential for applications in DNA and RNA amplification., (© 2024 Wiley‐VCH GmbH.)

The current lack of standardized testing methods to assess the binding isotherms of ions in cement and concrete research leads to uncontrolled variability in these results. In this study, an open-source and low-cost apparatus, named OpenHW3, is proposed to accurately measure the binding isotherms of ions in various cementitious material systems. OpenHW3 provides two main options, a temperature-controlled orbital shaker, as well as an option to retrofit a commercial orbital shaker for temperature control. The effectiveness of these device options is validated via comparison with conventional binding isotherms experiments. The binding isotherm results were comparable to conventional Waterbath shakers, while providing more reliable results compared to horizontal commercial shakers. It also provided accurate temperature control between 25 °C and 75 °C. The results here are critical for allowing open access to scientific equipment, and providing high-quality binding isotherm data for reliable service life models of urban infrastructure assets throughout the world., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

The stimulus-responsive regulation of enzyme catalytic activity and selectivity provides a new opportunity to extend the functionality and efficiency of immobilized enzymes. This work aims to design and synthesize a thermo-switchable enzyme@MOF for size-selective biocatalysis and biosensing through the immobilization of Candida rugosa lipase (CRL) within ZIF-8 functionalized with thermally responsive polymer, poly( N -isopropylacrylamide) (PNIPAM) (CRL@ZIF-8-PNIPAM). Unlike free CRL, which does not demonstrate substrate selectivity, we can reversibly tune the pore size of the ZIF-8-PNIPAM nanostructures (open pores or blocked pores) through temperature stimulus and subsequently modulate the substrate selectivity of CRL@ZIF-8-PNIPAM. CRL@ZIF-8-PNIPAM had the highest hydrolytic activity for small molecules (12 mM p -nitrophenol/mg protein/min, 4-nitrophenyl butyrate ( p -NP Be)) and the lowest hydrolytic activity for large molecules (0.16 mM p-nitrophenol/mg protein/min, 4-nitrophenyl palmitate ( p -NP P)). In addition, CRL@ZIF-8-PNIPAM demonstrated thermo-switchable behavior for large molecules ( p -NP P). The p -NP P hydrolytic activity of CRL@ZIF-8-PNIPAM was significantly lower at 40 °C (blocked pores) than at 27 °C (open pores). However, the transition of blocked pores and open pores is a gradual process that resulted in a delay in the "thermo-switchable" catalytic behavior of CRL@ZIF-8-PNIPAM during thermal cycling. CRL@ZIF-8-PNIPAM was also successfully used for the fabrication of electrochemical biosensors for the selective biosensing of pesticides with different molecular sizes.

Laser metal deposition (LMD) is a technology for the production of near-net-shape components. It is necessary to control the manufacturing process to obtain good geometrical accuracy and metallurgical properties. In the present study, a closed-loop control method of melt pool temperature for the deposition of small Ti6Al4V blocks in open environment was proposed. Based on the developed melt pool temperature sensor and deposition height sensor, a closed-loop control system and proportional-integral (PI) controller were developed and tested. The results show that with a PI temperature controller, the melt pool temperature tends to the desired value and remains stable. Compared to the deposition block without the controller, a flatter surface and no oxidation phenomenon are obtained with the controller.

Intracellular organelles alter their morphology in response to ambient conditions such as temperature to optimize physiological activities in cells. Observing organelle dynamics at various temperatures deepens our understanding of cellular responses to the environment. Confocal laser microscopy is a powerful tool for live-cell imaging of fluorescently labeled organelles. However, the large contact area between the specimen and the ambient air on the microscope stage makes it difficult to maintain accurate cellular temperatures. Here, we present a method for precisely controlling cellular temperatures using a custom-made adaptor that can be installed on a commercially available temperature-controlled microscope stage. Using this adaptor, we observed temperature-dependent organelle dynamics in living plant cells; morphological changes in chloroplasts and peroxisomes were temperature dependent. This newly developed adaptor can be easily placed on a temperature-controlled stage to capture intracellular responses to temperature at unprecedentedly high resolution., (© The Author(s) 2024. Published by Oxford University Press on behalf of The Japanese Society of Microscopy.)

This article presents a direct method for temperature control in solid-state lasers, where temperature stability is crucial for optimizing the performance and reliability of such lasers. The proposed method utilizes Peltier chips for both cooling and heating the laser crystal to achieve precise temperature regulation. The system design is based on the step response of the open-loop thermal system and employs a proportional-integral (PI) controller for closed-loop temperature control. Comprehensive testing on a femtosecond Titanium-Sapphire Laser (Ti:Sapphire laser) demonstrated that the system is capable of maintaining the desired operating temperature with remarkable stability and efficiency, highlighting its practicality for real-world applications. Method Outline:•Utilization of Peltier chips for precise temperature control.•Estimation of first-order transfer function based on step response.•Implementation of a proportional-integral (PI) controller for closed-loop temperature regulation., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors. Published by Elsevier B.V.)

The study of biological processes involving live microscopy techniques requires adequate temperature control to respect the physiology of the organism under study. We present here a design strategy for a microscope temperature stage based on thermoelectric elements. The design allows the user to access a range of temperatures below and above room temperature and can accommodate samples of different geometries. In addition, by cooling simultaneously the sample insert and the objective, we minimize the temperature gradients along the sample for large magnification objectives requiring immersion oil. We illustrate how this design can be used to study the physiology of the zebrafish embryo over the temperature tolerance of this species. We envision that this device could benefit the communities using model and non-model organisms with physiological temperatures different from typical mammalian cell culture incubation in biomedical research., Competing Interests: AF, JMIA and FE have filed a patent application for the temperature stage. AF and JMIA are part of MAX!mize, the official start-up incubation program for the Max Planck Society by Max Planck Innovation, to explore the commercial potential of the temperature stage. MV and OC declare no conflicts of interest in this manuscript., (© 2024 The Authors.)

Dynamic bonds can facilitate reversible formation and dissociation of connections in response to external stimuli, endowing materials with shape memory and self-healing capabilities. Temperature is an external stimulus that can be easily controlled through heat. Dynamic covalent bonds in response to temperature can reversibly connect, exchange, and convert chains in the polymer. In this review, we introduce dynamic covalent bonds that operate without catalysts in various temperature ranges. The basic bonding mechanism and the kinetics are examined to understand dynamic covalent chemistry reversibly performed by equilibrium control. Furthermore, a recent synthesis method that implements dynamic covalent coupling based on various polymers is introduced. Dynamic covalent bonds that operate depending on temperature can be applied and expand the use of polymers, providing predictions for the development of future smart materials.

Background: Induced hypothermia post-cardiac arrest is neuroprotective in animal experiments, but few high-quality studies have been performed in larger animals with human-like brains. The neuroprotective effect of postischemic hypothermia has recently been questioned in human trials. Our aim is to investigate whether hypothermia post-cardiac arrest confers a benefit compared to normothermia in large adult animals. Our hypothesis is that induced hypothermia post cardiac arrest is neuroprotective and that the effect diminishes when delayed two hours ., Methods: Adult female pigs were anesthetized, mechanically ventilated and kept at baseline parameters including normothermia (38 °C). All animals were subjected to ten minutes of cardiac arrest (no-flow) by induced ventricular fibrillation, followed by four minutes of cardiopulmonary resuscitation with mechanical compressions, prior to the first countershock. Animals with sustained return of spontaneous circulation (systolic blood pressure >60 mmHg for ten minutes) within fifteen minutes from start of life support were included and randomized to three groups; immediate or delayed (2 h) intravenous cooling, both targeting 33 °C, or intravenously controlled normothermia (38 °C). Temperature control was applied for thirty hours including cooling time, temperature at target and controlled rewarming (0.5 °C/h). Animals were extubated and kept alive for seven days. The primary outcome measure is histological brain injury on day seven. Secondary outcomes include neurological and neurocognitive recovery, and the trajectory of biomarkers of brain injury., Conclusion: High-quality animal experiments in clinically relevant large animal models are necessary to close the gap of knowledge regarding neuroprotective effects of induced hypothermia after cardiac arrest. Trial registration: Preclinicaltrials.eu (PCTE0000272), published 2021-11-03., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

The construction of diverse and distinctive self-assembled structures in water, based on the control of the self-assembly processes of artificial small molecules, has received considerable attention in supramolecular chemistry. Cage-like perforated vesicles are distinctive and interesting self-assembled structures. However, the development of self-assembling molecules that can easily form perforated vesicles remains challenging. This paper reports a lower critical solution temperature (LCST) behavior-triggered self-assembly property of a 4-aminoquinoline (4-AQ)-based amphiphile with a tetra(ethylene glycol) chain, in HEPES buffer (pH 7.4). This property allows to form perforated vesicles after heating at 80 °C (> LCST). The self-assembly process of the 4-AQ amphiphile can be controlled by heating at 80 °C (> LCST) or 60 °C (< LCST). After cooling to room temperature, the selective construction of the perforated vesicles and nanofibers was achieved from the same 4-AQ amphiphile. Furthermore, the perforated vesicles exhibited slow morphological transformation into intertwined-like nanofibers but were easily restored by brief heating above the LCST., (© 2024 Wiley-VCH GmbH.)

The benefit of temperature control in sepsis or septic shock is still under debate in the literature. We developed a national survey to assess the current state of knowledge and the practical management of spontaneous septic hypothermia in French intensive care units. Out of more 764 intensivists who were contacted, 436 responded to the survey. The majority of doctors (52.4%) considered spontaneous septic hypothermia to be a frequently encountered situation in intensive care, and 62.1% were interested in this problem. Definition of spontaneous septic hypothermia among French intensivists was not consensual. More than half of the doctors questioned (57.1%) stated that they did not actively rewarm patients suffering from spontaneous septic hypothermia., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Eustache, Le Balc’h and Launey.)

Sensors based on solidly mounted resonators (SMRs) exhibit a good set of properties, such as high sensitivity, fast response, low resolution limit and low production cost, which makes them an appealing technology for sensing applications. However, they can suffer from cross-sensitivity issues, as their response can be altered by undesirable ambient factors, such as temperature and humidity variations. In this work we propose a method to discriminate humidity variations from the general frequency response using an SMR specifically manufactured to operate in a dual-mode (displaying two close resonances). The two modes behave similarly towards humidity changes (-1.94 kHZ/(%RH)) for resonance one and -1.62 kHZ/(%RH) for resonance two), whereas their performance under temperature changes is significantly different, displaying 2.64 kHZ/°C for resonance one and 34.21 kHZ/°C for resonance two. This allows for the decoupling process to be carried out in a straightforward manner. Frequency response is tracked under different humidity conditions, in the -20 °C to room temperature region, proving that this behavior is reproducible in any given environment.

The application of compact NMR instruments to hot flowing samples or exothermically reacting mixtures is limited by the temperature sensitivity of permanent magnets. Typically, such temperature effects directly influence the achievable magnetic field homogeneity and hence measurement quality. The internal-temperature control loop of the magnet and instruments is not designed for such temperature compensation. Passive insulation is restricted by the small dimensions within the magnet borehole. Here, we present a design approach for active heat shielding with the aim of variable temperature control of NMR samples for benchtop NMR instruments using a compressed airstream which is variable in flow and temperature. Based on the system identification and surface temperature measurements through thermography, a model predictive control was set up to minimise any disturbance effect on the permanent magnet from the probe or sample temperature. This methodology will facilitate the application of variable-temperature shielding and, therefore, extend the application of compact NMR instruments to flowing sample temperatures that differ from the magnet temperature., (© 2023 The Authors. Magnetic Resonance in Chemistry published by John Wiley & Sons Ltd.)

Thermoplastic extrusion, a widely used method for processing thermoplastic materials, requires precise temperature control to ensure product quality. However, existing computer-aided engineering tools often oversimplify the temperature distribution calculations, leading to additional discrepancies between simulations and the actual processes. This study introduces a novel multi-region modeling approach to address this issue. By employing realistic temperature control conditions, the methodology overcomes the limitations of current numerical modeling tools. The key contributions include the development of a transient, incompressible, non-isothermal solver integrated into the OpenFOAM computational library and the implementation of a specialized boundary condition that emulates Proportional-Integral-Derivative (PID) control using real-time thermocouple measurements. The findings highlight temperature deviations at the flow channel walls and total pressure drop while demonstrating a smaller impact on velocity and flow uniformity at the outlet under steady-state conditions. This research substantially advances the understanding of thermal dynamics in extrusion processes, offering crucial insights for enhancing temperature control and laying the groundwork for more effective and precise operational strategies.

Three-dimensional printing in the field of additive manufacturing shows potential for customized medicines and solving gaps in paediatric formulations. Despite successful clinical trials, 3D printing use in pharmaceutical point-of-care is limited by regulatory loopholes and a lack of Pharmacopoeia guidelines to ensure quality. Semi-solid extrusion is a 3D printing technology that stands out for its versatility, but understanding the fluid dynamics of the semi-solid mass is critical. The aim of this research is to look into the advantages of instrumenting a 3D printer with a semi-solid extrusion motor-driven printhead, which is able to record the printing pressure over time, for in situ characterization of the semi-solid mass and quality evaluation of dosage forms. Four formulations using hydrochlorothiazide as the active pharmaceutical ingredient and several excipients were used. Their flow properties were studied at different printing speeds and temperatures using traditional techniques (rheometer and Texture Analyzer) and the proposed semi-solid extrusion motor-driven printhead incorporated into a printing platform. In addition, the influence of printing speed in the printing process was also evaluated by the study of printing pressure and printlet quality. The results demonstrated the similarities between the use of a Texture Analyzer and the semi-solid extrusion motor-driven. However, the latter enables temperature selection and printing speed in accordance with the printing process which are critical printing parameters. In addition, due to the incorporation of a sensor, it was possible to conclude, for the first time, that there is a link between changes in essential printing parameters like printing speed or formulations and variations in printing pressure and printlet quality attributes such as the energy require to obtain a single dosage unit, weight or diameter. This breakthrough holds a lot of potential for assuring the quality of 3D printing dosage forms and paving the way for their future incorporation into point-of-care settings.

Buildings can have varying heating and cooling set points to take advantage of favorable environmental conditions and low time-of-use rates. To optimize temperature scheduling and energy planning, building energy managements need reliable building thermal models and efficient estimation methods to accurately estimate space heating and cooling supply (or power demand) over a certain period (e.g., 24 h). This accurate estimation capability is vital for performing temperature control strategies. Therefore, the present study used resistor-capacitor (RC) models and unscented Kalman filter (UKF) integrated with nonlinear least square (NLS) to develop a method for precisely estimating heating and cooling supply to control zone temperature. To evaluate the capability of the method, two case studies are conducted. The first case study involves a made-up simple RC model, while the second case study uses monitored data from a single detached house in different scenarios. The capability of the method is evaluated by applying the estimated heating and cooling supply to the RC thermal model and simulated zone temperatures. Then, assess whether the controlled zone's temperature meets the expected temperature or not. The performance evaluation shows that the developed method can accurately estimate the heating and cooling supply, validating its applicability to temperature control objectives., Practical Application: This research provides a valuable contribution to modern building industry professionals by offering a precise method for estimating heating and cooling supply for temperature control in buildings. By equipping practitioners with an effective tool to optimize energy management, this study addresses a critical aspect of building performance. The practical case studies demonstrate the versatility and applicability of this approach in real-world scenarios. In a world increasingly prioritizing energy efficiency and sustainability, this research empowers professionals to make informed decisions, enhance building performance, and contribute to a greener and more sustainable future, all within a concise and actionable framework., Competing Interests: The author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article., (© The Author(s) 2023.)

Monitoring ocean surface temperature is critical to infer the variability of the upper layers of the ocean, from short temporal scales to climatic change scales. Analysis of the climatological trends and anomalies is fundamental to comprehend the long-term effects of climate change on marine ecosystems and coastal regions. The original data for the dataset presented was collected by the Portuguese Hydrographic Institute ( Instituto Hidrográfico ) using seven Ondograph and Meteo-oceanography buoys anchored offshore along the Portuguese coast to acquire ocean surface temperatures. The original raw data was pre-processed to provide averages over 3-hour periods and daily averages, and this cleaned data constitutes the provided dataset. The 3-hour temperature averages were obtained mainly between 2011 and 2015, and the daily temperature averages were obtained in intervals that vary with the considered buoy, having an average interval of 14 years per buoy. The data gathered provides a considerable temporal window, enabling the creation of data series and the implementation of data mining algorithms to develop decision support systems. Collecting data in situ makes it possible to validate simulated results obtained using approximation models. This allows for more accurate temperature readings and facilitates testing and correcting created models., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Temperature control is the only neuroprotective intervention suggested in current international guidelines for patients with return of spontaneous circulation after cardiac arrest, but the prevalence of temperature control therapy, temperature settings, and outcomes have not been clearly reported. We aimed to investigate changes over 7 years in provision of temperature control treatment among out-of-hospital cardiac arrest (OHCA) patients in Kanto region, Japan. Data of all adult OHCA patients who survived for more than 24 hours in the prospective cohort studies, SOS-KANTO 2012 (conducted from 2012 to 2013) and SOS-KANTO 2017 (conducted from 2019 to 2021), in Japan were included. We compared the prevalence of temperature control and the proportion of mild (≥35°C) and moderate (from 32°C to 34.9°C) hypothermia between the two study groups. We also performed a Cox regression analysis to evaluate 30-day mortality adjusted by temperature control therapy (none, moderate hypothermia, or mild hypothermia), age, sex, past medical history, witnessed status, bystander cardiopulmonary resuscitation, initial rhythm, location of arrest, and dataset (SOS-KANTO 2012 or 2017). We analyzed data from 2936 patients ( n  = 1710, SOS-KANTO 2012; n  = 1226, SOS-KANTO 2017). Use of temperature control was lower (45.3% vs. 41.4%, p  = 0.04), moderate hypothermia was lower ( p  < 0.01), and mild hypothermia was higher ( p  < 0.01) in SOS-KANTO 2017 compared with SOS-KANTO 2012. The survival rate was significantly higher for patients with mild ( p  < 0.01) and moderate ( p  < 0.01) hypothermia compared with those who did not receive temperature control therapy. Overall, the incidence of moderate hypothermia decreased and that of mild hypothermia increased and the use of temperature control decreased between the two studies conducted 7 years apart in the Kanto area, Japan. Temperature control management might improve survival of patients with OHCA.

Multidimensional integration and multifunctional component assembly have been greatly explored in recent years to extend Moore's Law of modern microelectronics. However, this inevitably exacerbates the inhomogeneity of temperature distribution in microsystems, making precise temperature control for electronic components extremely challenging. Herein, we report an on-chip micro temperature controller including a pair of thermoelectric legs with a total area of 50 × 50 μm 2 , which are fabricated from dense and flat freestanding Bi 2 Te 3 -based thermoelectric nano films deposited on a newly developed nano graphene oxide membrane substrate. Its tunable equivalent thermal resistance is controlled by electrical currents to achieve energy-efficient temperature control for low-power electronics. A large cooling temperature difference of 44.5 K at 380 K is achieved with a power consumption of only 445 μW, resulting in an ultrahigh temperature control capability over 100 K mW -1 . Moreover, an ultra-fast cooling rate exceeding 2000 K s -1 and excellent reliability of up to 1 million cycles are observed. Our proposed on-chip temperature controller is expected to enable further miniaturization and multifunctional integration on a single chip for microelectronics., (© 2024. The Author(s).)

Clinical laboratory examinations frequently include biochemical analysis of the liver. The presence of alanine aminotransferase (ALT) and aspartate transaminase (AST) in serum can be used to identify liver damage. In this study, a centrifugal microfluidic-based clinical biochemical detection system was developed for the detection of liver function markers. Using the centrifugal microfluidic chip and centrifugal force on the chip, separation of blood cells and serum was performed. The extraction and mixing of quantitative serum and diluent were completed under the chip design of microchannels and microchambers. The lyophilized reagent beads in the chip interacted with the combined solution. The Fuzzy PID algorithm regulates the power of the heating film to deliver the ideal reaction temperature. In accordance with Beer-Lambert, the rate of change in the absorbance of the reaction solution at 340 nm of the light source was measured and a standard curve for the relationship between concentration and rate of change in absorbance was constructed. The system is portable, quick, and simple to use because it uses a centrifugal microfluidic chip instead of the conventional detection and analysis approach. In the future, it is anticipated that the system will have several applications in the detection of highly integrated on-chip point-of-care devices., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Acoustofluidics is an emerging research field wherein either mixing or (bio)-particle separation is conducted. High-power acoustic streaming can produce more intense and rapid flow patterns, leading to faster and more efficient liquid mixing. However, without cooling, the temperature of the piezoelectric element that is used to supply acoustic power to the fluid could rise above 50% of the Curie point of the piezomaterial, thereby accelerating its aging degradation. In addition, the supply of excessive heat to a liquid may lead to irreproducible streaming effects and gas bubble formation. To control these phenomena, in this paper, we present a feedback temperature control system integrated into an acoustofluidic setup using bulk acoustic waves (BAWs) to elevate mass transfer and manipulation of particles. The system performance was tested by measuring mixing efficiency and determining the average velocity magnitude of acoustic streaming. The results show that the integrated temperature control system keeps the temperature at the set point even at high acoustic powers and improves the reproducibility of the acoustofluidic setup performance when the applied voltage is as high as 200 V.

Background: The "Blood Pressure and Oxygenation Targets in Post Resuscitation Care" (BOX) trial investigated whether a low versus high blood pressure target, a restrictive versus liberal oxygenation target, and a shorter versus longer duration of device-based fever prevention in comatose patients could improve outcomes. No differences in rates of discharge from hospital with severe disability or 90-day mortality were found. However, long-term effects and potential interaction of the interventions are unknown. Accordingly, the objective of this study is to investigate both individual and combined effects of the interventions on 1-year mortality rates., Methods: The BOX trial was a randomized controlled two-center trial that assigned comatose resuscitated out-of-hospital cardiac arrest patients to the following three interventions at admission: A blood pressure target of either 63 mmHg or 77 mmHg; An arterial oxygenation target of 9-10 kPa or 13-14 kPa; Device-based fever prevention administered as an initial 24 h at 36 °C and then either 12 or 48 h at 37 °C; totaling 36 or 72 h of temperature control. Randomization occurred in parallel and simultaneously to all interventions. Patients were followed for the occurrence of death from all causes for 1 year. Analyzes were performed by Cox proportional models, and assessment of interactions was performed with the interventions stated as an interaction term., Results: Analysis for all three interventions included 789 patients. For the intervention of low compared to high blood pressure targets, 1-year mortality rates were 35% (138 of 396) and 36% (143 of 393), respectively, hazard ratio (HR) 0.92 (0.73-1.16) p = 0.47. For the restrictive compared to liberal oxygenation targets, 1-year mortality rates were 34% (135 of 394) and 37% (146 of 395), respectively, HR 0.92 (0.73-1.16) p = 0.46. For device-based fever prevention for a total of 36 compared to 72 h, 1-year mortality rates were 35% (139 of 393) and 36% (142 of 396), respectively, HR 0.98 (0.78-1.24) p = 0.89. There was no sign of interaction between the interventions, and accordingly, no combination of randomizations indicated differentiated treatment effects., Conclusions: There was no difference in 1-year mortality rates for a low compared to high blood pressure target, a liberal compared to restrictive oxygenation target, or a longer compared to shorter duration of device-based fever prevention after cardiac arrest. No combination of the interventions affected these findings. Trial registration ClinicalTrials.gov NCT03141099, Registered 30 April 2017., (© 2024. The Author(s).)

Ice-binding proteins (IBPs) protect organisms living in sub-freezing conditions by inhibiting ice growth in fish and insects, limiting ice recrystallization in plants, and assisting bacteria to adhere to ice. The mechanisms by which these proteins bind to ice and inhibit its growth have been studied both experimentally and using molecular dynamic simulations. A unique experimental technique developed to test and characterize the interactions between IBPs and ice using a combination of a microfluidic device, cold stages with millikelvin temperature resolution, fluorescence-labeled IBPs, and fluorescence microscopy is described herein. The main advantage of this technique is the ability to exchange the solution around micron-sized ice crystals and characterize their binding to and inhibition of ice., (© 2024. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Introduction: Creating large lesion in ablations using the DiamondTemp (DTA) ablation system may reduce the frequency of arrhythmia recurrence and allow the treatment of ventricular arrhythmias. Therefore, this study aimed to investigate whether power, application time, contact force (CF), and contact angle affect lesion formation in the ventricles., Methods: Ablations were delivered to porcine myocardial preps to evaluate the lesion characteristics. Ablations were conducted with a maximum power of 50 W, target temperature of 58°C, CF of 10, 20, or 30 g, and contact angle between the catheter tip and tissue. The ablation durations were 15, 30, 60 s, 15 s × 2, or 30 s × 2., Results: Steam pops occurred only in cases with perpendicular contact. The lesion depth was larger in all settings in the perpendicular orientation than in the parallel orientation. The temperatures were lower in all settings in the perpendicular orientation than in the parallel orientation. The lesions became larger as CF increased with perpendicular contact and duration of ≥30 s. The longer application time resulted in larger surface area, depth, and volume of the lesion. Lesion depth was greater with single application of 30 and 60 s than with 15 s × 2 and 30 s × 2, respectively., Conclusion: It is important to perform a single prolonged application as much as possible to create deeper lesions. Parallel contact with the tissue should be maintained to take advantage of the temperature sensor's capabilities to avoid pop phenomenon., Competing Interests: Authors declare no conflict of interests for this article., (© 2023 The Authors. Journal of Arrhythmia published by John Wiley & Sons Australia, Ltd on behalf of Japanese Heart Rhythm Society.)

Background and Aims: The safety evaluation of TactiFlex, a novel contact-force sensing catheter with a flexible 4-mm tip irrigated through laser-cut kerfs, has been ongoing. This study aimed to verify the safety of this type of catheter., Methods: Study 1: Radiofrequency (RF) applications at a range of powers (30-50 W), contact forces (10-20 g), and durations (10-60 s) using perpendicular/parallel catheter orientation with half-normal (HNS) or normal saline irrigation were compared between TactiFlex (4-mm tip) and TactiCath (3.5-mm tip) with temperature-controlled mode in excised porcine hearts. Study 2: The relation between RF applications using TactiFlex and the incidence of steam-pops in the real clinical cases were examined., Results: Study-1: 576 RF lesions were examined. TactiFlex demonstrated a significantly lower risk of steam-pops (5[1.7%] vs. 59[20.5%], p < .0001). Compared to 3.5-mm-tip catheter (TactiCath), 4-mm-tip catheter (TactiFlex) produced smaller lesion volume at perpendicular (193[98-554]mm 3 vs. 263[139-436]mm 3 , p < .0001), but relatively similar lesion volume at parallel contact (243[105-443]mm 3 vs. 278[180-440]mm 3 , p = .06). HNS-irrigation tended to increase the lesion volume in both catheters and to increase the incidence of steam-pops with TactiCath, but not with TactiFlex. The cut-off value of %impedance-drop ( = absolute impedance-drop/initial impedance) of 20% predicted steam-pops with a sensitivity = 100% and specificity = 89.6% in TactiFlex. Study-2: 5496 RF applications in 84 patients (51AFs/8ATs/3AVNRTs/4AVRTs/17PVCs/4VTs) using TactiFlex were analyzed. Four steam-pops (0.07%) in three patients with pericardial effusion were observed (%impedance-drop = 24%/26%/29%/35%, respectively). The cut-off value of %impedance-drop = 20%, derived from ex-vivo study, showed sensitivity = 100% and specificity = 90.1% in detecting steam-pops., Conclusion: TactiFlex reduced the risk of steam-pops than TactiCath. %impedance-drop ≤ 20% may be reasonable for safely use with a sufficient safety margin. For 4-mm-tip catheter, parallel-contact may be recommended for larger lesion creation., (© 2023 Wiley Periodicals LLC.)

A suitable environment is essential for successful long-term cell culturing in vitro. Too high or too low temperature will affect the growth of cells, so we need to maintain the constant temperature of the cell culture environment. Usually, cells are cultured in a cell incubator, and the constant temperature is provided by the cell incubator. Recently, we have developed a multi-channel axon stretch growth bioreactor for rapid acquisition of autologous nerve tissue. Since the motor and controller are placed in the incubator for a long time, the service life of the equipment will be shortened or even damaged due to high humidity and weak acid environment. In order to enable the axon stretch growth bioreactor to culture cells independently, we designed a constant temperature control system for the device. Firstly, the simulation results show that the fuzzy PID control reduces the overshoot and improves the traditional PID control with large overshoot and low control precision. Then, the two control algorithms were applied to the multi-channel axon stretch growth bioreactor by STM32F4 microcontroller. The experimental data show that the fuzzy PID control algorithm has good control effect and can meet the requirement of constant temperature of cell growth. Finally, nerve cells derived from human pluripotent stem cells were successfully cultured in a cell culture amplification chamber under a constant temperature environment provided by a fuzzy PID controller, and well-developed axons could be seen. In the future, we may transplant stretch growth axons into living organisms to repair nerve damage., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Live-cell imaging is a common technique in microscopy to investigate dynamic cellular behaviour and permits the accurate and relevant analysis of a wide range of cellular and tissue parameters, such as motility, cell division, wound healing responses and calcium (Ca 2 + ) signalling in cell lines, primary cell cultures and ex vivo incubator are often bulky, expensive and use proprietary components. Here we present an inexpensive, open-source temperature control system for 2 incubator are often bulky, expensive and use proprietary components. Here we present an inexpensive, open-source temperature control system for in vitro live-cell imaging. Our system 'ThermoCyte', which is constructed from standard electronic components, enables precise tuning, control and logging of a temperature 'set point' for imaging cells at physiological temperature. We achieved stable thermal dynamics, with reliable temperature cycling and a standard deviation of 0.42°C over 1 h. Furthermore, the device is modular in nature and is adaptable to the researcher's specific needs. This represents simple, inexpensive and reliable tool for laboratories to carry out custom live-cell imaging protocols, on a standard laboratory bench, at physiological temperature., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors.)

A hydrogen maser is a high-precision time measurement instrument with high frequency stability and low frequency drift, which is widely used in satellite navigation, ground time keeping, frequency measurement, and other fields. An active hydrogen maser (AHM) is better than the current space passive hydrogen maser (PHM) in orbit in terms of its frequency stability and drift rate, but it has the disadvantages of large volume and weight. To further reduce the volume and weight of the circuit, this paper demonstrates a digital circuit control system based on a field-programmable gate array (FPGA). It uses digital temperature control, digital detectors, digital down-conversion, digital phase-locked loops, and other digital methods for temperature control, cavity auto-tuning, and crystal phase locking, which improve the integration and flexibility of the circuit system. Meanwhile, a tuning method based on hydrogen flow is proposed, which effectively solves the problem of fluctuations in hydrogen maser resonance frequency with changes in the external environment. Our experimental results show that the designed digital circuit control system meets the requirements of an oven-controlled crystal oscillator (OCXO) loop and a cavity loop. Its frequency stability can reach 2.6×10-13/1 s and 1.4×10-15/10,000 s, which is close to the stability index of ground active hydrogen maser. This scheme has certain practical engineering value, and can be used in the design of hydrogen masers for next-generation space navigation satellites, deep space exploration, and space stations.

Increased gas emissions from soil into the atmosphere are one form of ecosystem feedback in response to climate change. Soil temperature plays a critical role in the soil emission of carbon dioxide (CO 2 ) and nitrous oxide (N 2 O) suggesting that the release of gases can be reduced by regulating soil temperature. This study proposes a green microencapsulated phase-change material (mPCM) as a soil temperature regulator due to its ability to absorb and release heat during temperature phase transition. The objective is to test how mPCM in soil mixtures influences CO 2 and N 2 O fluxes under laboratory-controlled conditions. For this purpose, a series of soil incubations were carried out with different temperature regimes and soil moisture. The test results revealed that at 20% soil moisture mPCM reduced cumulative CO 2 emissions from the soil by 16.4% during the thawing stage and by 20.5% during the freezing stage. At 25% soil moisture, mPCM showed a greater effect reducing cumulative CO 2 emissions by 23.9% during the thawing stage and by 24.2% during the freezing stage. At below-zero temperatures, mPCM reduced the total N 2 O flux by 11.6% at 20% soil moisture and by 26.0% at 25% soil moisture, compared to soil without mPCM. As soil moisture increased, the effects of mPCM on CO 2 and N 2 O fluxes became more pronounced. Cyclic freezing and thawing of soil led to an increase in gas flux. This variation was reduced by the mPCM due to its ability to mitigate the change of soil temperature. Inhibition of the rise in soil temperature due to the inclusion of mPCM reduced the rate of activation of soil mineralization, which reduced gas fluxes. This study demonstrates the potential of mPCM application to reduce greenhouse gas emissions from soil through thermoregulation., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Aim: To perform an updated systematic review and meta-analysis on temperature control in adult patients with cardiac arrest., Methods: The review is an update of a previous systematic review published in 2021. An updated search including PubMed, Embase, and the Cochrane Central Register of Controlled Trials was performed on May 31, 2023. Controlled trials in humans were included. The population included adult patients with cardiac arrest. The review included all aspects of temperature control including timing, temperature, duration, method of induction and maintenance, and rewarming. Two investigators reviewed trials for relevance, extracted data, and assessed risk of bias. Data were pooled using random-effects models. Certainty of evidence was evaluated using GRADE., Results: The updated systematic search identified six new trials. Risk of bias in the trials was assessed as intermediate for most of the outcomes. For temperature control with a target of 32-34 °C vs. normothermia or 36 °C, two new trials were identified, with seven trials included in an updated meta-analysis. Temperature control with a target of 32-34 °C did not result in an improvement in survival (risk ratio: 1.06 [95%CI: 0.91, 1.23]) or favorable neurological outcome (risk ratio: 1.27 [95%CI: 0.89, 1.81]) at 90-180 days after the cardiac arrest (low certainty evidence). Subgroup analysis according to location of cardiac arrest (in-hospital vs. out-of-hospital) found similar results. A sensitivity analysis of nine trials comparing temperature control at 32-34 °C to normothermia or 36 °C for favorable neurological outcome at any time point also did not show an improvement in outcomes (risk ratio: 1.14 [95%CI 0.98, 1.34]). New individual trials comparing a target of 31-34 °C, temperature control for 12-24 hours to 36 hours, a rewarming rate of 0.25-0.5 °C/hour, and the effect of temperature control with fever prevention found no differences in outcomes., Conclusions: This updated systematic review showed no benefit of temperature control at 32-34 °C compared to normothermia or 36 °C, although the 95% confidence intervals cannot rule out a potential beneficial effect. Important knowledge gaps exist for topics such as hypothermic temperature targets, rewarming rate, and fever control., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: AG: DSMB member Noorik Biopharmaceuticals and consultant NMD pharma, outside the submitted work. Jerry Nolan is the editor-in-chief of Resuscitation. Jasmeet Soar is an editor at Resuscitation. The remaining authors report no conflicts of interest., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Background Forced air warming (FAW) devices are routinely utilized in operating rooms for patient temperature control. However, there have been some controversy and conflicting evidence on whether they are a possible source of surgical site infections (SSIs) and contamination. Methods A total of 144 petri dishes were randomized to either a control or experimental group (72 in each group). Each trial consisted of six petri dishes in three locations (floor, table, and operative limb). Two dishes at each location were closed sequentially at one hour, two hours, and three hours. Two control and two experimental trials were performed in two separate operating suites with two different FAW devices. The petri dishes were then analyzed for growth for 48 hours. Two culture swabs from each FAW device hose were obtained and analyzed. Results None of the culture swabs analyzed showed any growth on blood or chocolate agar culture media. There was no significant difference in bacterial colony-forming units per cubic meter (CFU/m 3 ) air between the trial and control groups in each location at one hour of exposure. At two hours of exposure, there was a significantly higher bacterial CFU/m 3  air in the experimental group in the operative limb. At three hours of exposure, there was a significantly higher bacterial CFU/m 3  air in the experimental group on the floor. However, overall, there was no difference in bacterial CFU/m 3 air in both study groups at different times of exposure, incubation, or location. Conclusion Our study was unable to identify any statistically significant risk of contamination associated with the use of FAW devices. However, our study design was limited due to the absence of operating room staff during testing. For this reason, we recommend further research into this topic with the use of an active operating room, which includes simulated movement from the surgeon, anesthesia, scrub technician, nursing, and any other operating room staff who may be present during a real operation., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2023, Gemayel et al.)

Due to the huge energy consumption of traditional cooling- and heating-based electricity, passive radiative cooling and solar heating with a minimum carbon footprint using the outer space and Sun as natural thermodynamic resources have attracted much attention. However, most passive devices are static and monofunctional, and cannot meet the practical requirements of dynamic cooling and heating under various conditions. Here, we demonstrate a smart thermal-gated (STG) bilayer membrane that enables fully automatic and temperature-adaptive radiative cooling and solar heating. Specifically, this device can switch from reflective to absorptive (white to black) in the solar wavelength with the reduction in optical scattering upon ambient temperature, corresponding to a sunlight reflectivity change from 0.962 to 0.059 when the temperature drops below ∼30 °C, whereas its mid-infrared emissivity remains at ∼0.95. Consequently, this STG membrane achieves a temperature of ∼5 °C below ambient (a key signature of radiative cooling) under direct sunlight (peak solar irradiance >900 W m -2 ) in summer and a solar heating power of ∼550 W m -2 in winter. Theoretical analysis reveals the substantial advantage of this switchable cooling/heating device in potential energy saving compared with cooling-only and heating-only strategies when widely used in different climates. It is expected that this work will pave a new pathway for designing temperature-adaptive devices with zero energy consumption and provide an innovative way to achieve sustainable energy., Competing Interests: Conflict of interest The authors declare that they have no conflict of interest., (Copyright © 2023 Science China Press. Published by Elsevier B.V. All rights reserved.)

The ability to simultaneously heat and image samples using transmitted light is crucial for several biological applications. However, existing techniques such as heated stage microscopes, thermal cyclers equipped with imaging capabilities, or non-contact heating systems are often bulky, expensive, and complex. This work presents the development and characterization of a Miniaturized Optically-clear Thermal Enclosure (MOTE) system-an open-source, inexpensive, and low-powered modular system-capable of convectively heating samples while simultaneously imaging them with transmitted light. We develop and validate a computational fluid dynamics (CFD) model to design and optimize the heating chamber. The model simulates velocity and temperature profiles within the heating chamber for various chamber materials and sizes. The computational model yielded an optimal chamber dimension capable of achieving a stable temperature ranging from ambient to 95 °C with a spatial discrepancy of less than 1.5 °C, utilizing less than 8.5 W of power. The dual-functionality of the MOTE system, enabling synchronous heating and transmitted light imaging, was demonstrated through the successful execution of paper-based LAMP reactions to detect λ DNA samples in real-time down to 10 copies/µL of the target concentration. The MOTE system offers a promising and flexible platform for various applications, from molecular diagnostics to biochemical analyses, cell biology, genomics, and education.

In a laboratory environment, in order to test the attitude recognition capability and accuracy of the satellite attitude sensor-the infrared Earth sensor-the infrared Earth simulator is fixed on a five-axis turntable to enable multi-angle testing. In the past, the temperature control system of the Earth simulator was water cooled, which not only affected the working accuracy of the Earth simulator but also affected its size and portability and made it more difficult to use on the turntable. Therefore, we designed a cooling method for the cold plate based on semiconductor cooling technology combined with air cooling, and we designed a fuzzy PID control algorithm to accurately control the temperature according to this cooling method. In this article, we use SOLIWORKS to build the system model for the system and use the ANAYS Workbench to perform temperature analysis of the Earth simulator. The results show that the cold plate temperature can be maintained at 20.089 °C when the hot plate temperature is 85 °C. The overall temperature uniformity of the hot plate is better than ±0.3 °C, which meets the index requirements of the Earth simulator. We found that this cooling method can replace water cooling, giving the simulator the advantage of being miniaturized, and it can be adaptable to the turntable, which can be widely used in various sizes of Earth simulators and in various complex environments and operating conditions.

Background: Definition of temporal serum proteome profiles after out-of-hospital cardiac arrest may identify biological processes associated with severe hypoxia-ischaemia and reperfusion. It may further explore intervention effects for new mechanistic insights, identify candidate prognostic protein biomarkers and potential therapeutic targets. This pilot study aimed to investigate serum proteome profiles from unconscious patients admitted to hospital after out-of-hospital cardiac arrest according to temperature treatment and neurological outcome., Methods: Serum samples at 24, 48, and 72 h after cardiac arrest at three centres included in the Target Temperature Management after out-of-hospital cardiac arrest trial underwent data-independent acquisition mass spectrometry analysis (DIA-MS) to find changes in serum protein concentrations associated with neurological outcome at 6-month follow-up and targeted temperature management (TTM) at 33 °C as compared to 36 °C. Neurological outcome was defined according to Cerebral Performance Category (CPC) scale as "good" (CPC 1-2, good cerebral performance or moderate disability) or "poor" (CPC 3-5, severe disability, unresponsive wakefulness syndrome, or death)., Results: Of 78 included patients [mean age 66 ± 12 years, 62 (80.0%) male], 37 (47.4%) were randomised to TTM at 36 °C. Six-month outcome was poor in 47 (60.3%) patients. The DIA-MS analysis identified and quantified 403 unique human proteins. Differential protein abundance testing comparing poor to good outcome showed 19 elevated proteins in patients with poor outcome (log 2 -fold change (FC) range 0.28-1.17) and 16 reduced proteins (log 2 (FC) between - 0.22 and - 0.68), involved in inflammatory/immune responses and apoptotic signalling pathways for poor outcome and proteolysis for good outcome. Analysis according to level of TTM showed a significant protein abundance difference for six proteins [five elevated proteins in TTM 36 °C (log 2 (FC) between 0.33 and 0.88), one reduced protein (log 2 (FC) - 0.6)] mainly involved in inflammatory/immune responses only at 48 h after cardiac arrest., Conclusions: Serum proteome profiling revealed an increase in inflammatory/immune responses and apoptosis in patients with poor outcome. In patients with good outcome, an increase in proteolysis was observed, whereas TTM-level only had a modest effect on the proteome profiles. Further validation of the differentially abundant proteins in response to neurological outcome is necessary to validate novel biomarker candidates that may predict prognosis after cardiac arrest., (© 2023. The Author(s).)

This study addresses the pressing issue of energy consumption and efficiency in the Kingdom of Saudi Arabia (KSA), a region experiencing growing demand for energy resources. Temperature control plays a vital role in achieving energy efficiency; however, traditional control systems may struggle to adapt to the non-linear and time-varying characteristics of the problem. To tackle this challenge, a fuzzy petri net (FPN) controller is proposed as a more suitable solution that combines fuzzy logic (FL) and petri nets (PN) to model and simulate complex systems. The main objective of this research is to develop an intelligent energy-saving framework that integrates advanced methodologies and air conditioning (AC) systems to optimize energy utilization and create a comfortable indoor environment. The proposed system incorporates user identification to authorize individuals who can set the temperature, and FL combined with PN is utilized to monitor and transmit their preferred temperature settings to a PID controller for adjustment. The experimental findings demonstrate the effectiveness of integrating the FPN controller with a convertible frequency AC compressor in significantly reducing energy consumption by 94% compared to using the PN controller alone. The utilization of the PN controller alone resulted in a 25% reduction in energy consumption. Conversely, employing a fixed-frequency compressor led to a 40% increase in energy consumption. These results emphasize the advantages of integrating FL into the PN model, as it effectively reduces energy consumption by half, highlighting the potential of the proposed approach for enhancing energy efficiency in AC systems.

This paper introduces a chip-level oven-controlled system for improving the temperature stability of MEMS resonators wherein we designed the resonator and the micro-hotplate using MEMS technology, then bounding them in a package shell at the chip level. The resonator is transduced by AlN film, and its temperature is monitored by temperature-sensing resistors on both sides. The designed micro-hotplate is placed at the bottom of the resonator chip as a heater and insulated by airgel. The PID pulse width modulation (PWM) circuit controls the heater according to the temperature detection result to provide a constant temperature for the resonator. The proposed oven-controlled MEMS resonator (OCMR) exhibits a frequency drift of 3.5 ppm. Compared with the previously reported similar methods, first, the OCMR structure using airgel combined with a micro-hotplate is proposed for the first time, and the working temperature is extended from 85 °C to 125 °C. Second, our work does not require redesign or additional constraints on the MEMS resonator, so the proposed structure is more general and can be practically applied to other MEMS devices that require temperature control.

Cardiac arrest (CA) is a critical public health issue affecting more than half a million Americans annually. The main determinant of outcome post-CA is hypoxic-ischemic brain injury (HIBI), and temperature control is currently the only evidence-based, guideline-recommended intervention targeting secondary brain injury. Temperature control is a key component of a post-CA care bundle; however, conflicting evidence challenges its wide implementation across the vastly heterogeneous population of CA survivors. Here, we critically appraise the available literature on temperature control in HIBI, detail how the evidence has been integrated into clinical practice, and highlight the complications associated with its use and the timing of neuroprognostication after CA. Future clinical trials evaluating different temperature targets, rates of rewarming, duration of cooling, and identifying which patient phenotype benefits from different temperature control methods are needed to address these prevailing knowledge gaps., (© 2023. The Author(s).)

The traditional thermal gravimetric analyzer (TGA) has a noticeable thermal lag effect, which restricts the heating rate, while the micro-electro-mechanical system thermal gravimetric analyzer (MEMS TGA) utilizes a resonant cantilever beam structure with high mass sensitivity, on-chip heating, and a small heating area, resulting in no thermal lag effect and a fast heating rate. To achieve high-speed temperature control for MEMS TGA, this study proposes a dual fuzzy proportional-integral-derivative (PID) control method. The fuzzy control adjusts the PID parameters in real-time to minimize overshoot while effectively addressing system nonlinearities. Simulation and actual testing results indicate that this temperature control method has a faster response speed and less overshoot compared to traditional PID control, significantly improving the heating performance of MEMS TGA.

Advances in sensors have revolutionized the biomedical engineering field, having an extreme affinity for specific analytes also providing an effective, real-time, point-of-care testing for an accurate diagnosis. Quartz Crystal Microbalance (QCM) is a well-established sensor that has been successfully applied in a broad range of applications to monitor and explore various surface interactions, in situ thin-film formations, and layer properties. This technology has gained interest in biomedical applications since novel QCM systems are able to work in liquid media. QCM with dissipation monitoring (QCM-D) is an expanded version of a QCM that measures changes in damping properties of adsorbed layers thus providing information on its viscoelastic nature. In this article, an open source and low cost QCM-D prototype for biomedical applications was developed. In addition, the system was validated using different Polyethylene Glycol (PEG) concentrations due to its importance for many medical applications. The statistics show a bigger dissipation of the system as the fluid becomes more viscous, also having a very acceptable sensibility when temperature is controlled., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 Published by Elsevier Ltd.)

The outcome of cardiac arrest is worse when there is fever after spontaneous circulation is restored (ROSC). The purpose of this study was to investigate the mechanism of post-ROSC cardiac dysfunction after hyperthermia treatment and the effects of temperature control. Twenty-four male Bama minipigs were randomized into 3 groups (8 per group): CPR + controlled normothermia (CN), CPR + hyperthermia (HT), and CPR + therapeutic mild hypothermia (TMH). Defibrillation was given to pigs with ventricular fibrillation after 8 min of untreated fibrillation. Subsequently, these animals received the post-ROSC treatments of hyperthermia (38 °C), controlled normothermia (37 °C) or hypothermia (33 °C) according to the groups. Hemodynamic parameters, left ventricular ejection fraction, blood samples and myocardial tissues were assessed. At 24 h after the post-ROSC treatments, the pigs treated with hyperthermia showed increments in heart rate and plasma cardiac troponin I, and decreases in mean arterial pressure, cardiac index, and left ventricular ejection fraction, compared to those with the controlled normothermia pigs. However, the deterioration of the above parameters can be attenuated by TMH. The pigs in the TMH group also had a reduced percentage of apoptotic cardiomyocytes, an increased anti-apoptotic Bcl-2/Bax ratio and a decreased caspase-3 activity in myocardium, as compared with both controlled normothermia and hyperthermia pigs. In conclusion, hyperthermia is associated with a worse myocardial dysfunction. TMH improves hyperthermia-induced myocardial dysfunction by attenuating apoptosis in a porcine model of cardiac arrest., Competing Interests: Declaration of competing interest The authors declare no potential conflicts of interest., (Copyright © 2022. Published by Elsevier Inc.)

Aims: International guidelines give recommendations for the management of comatose out-of-hospital cardiac arrest (OHCA) survivors. We aimed to investigate adherence to guidelines and disparities in the treatment of OHCA in hospitals in Europe., Methods and Results: A web-based, multi-institutional, multinational survey in Europe was conducted using an electronic platform with a predefined questionnaire developed by experts in post-resuscitation care. The survey was disseminated to all members of the societies via email, social media, websites, and newsletters in June 2021. Of 252 answers received, 237 responses from different units were included and 166 (70%) were from cardiac arrest centres. First-line vasopressor used was noradrenaline in 195 (83%) and the first-line inotrope was dobutamine in 148 (64%) of the responses. Echocardiography is available 24/7 in 204 (87%) institutions. Targeted temperature management was used in 160 (75%) institutions for adult comatose survivors of OHCA with an initial shockable rhythm. Invasive or external cooling methods with feedback were used in 72 cardiac arrest centres (44%) and 17 (24%) non-cardiac arrest centres (P < 0.0003). A target temperature between 32 and 34°C was preferred by 46 centres (21%); a target between 34 and 36°C by 103 centres (52%); and <37.5°C by 35 (16%). Multimodal neuroprognostication was poorly implemented and a follow-up at 3 months after discharge was done in 71 (30%) institutions., Conclusion: Post-resuscitation care is not well established and varies among centres in European hospitals. Cardiac arrest centres have a higher coherence with guidelines compared with respondents from non-cardiac arrest centres. The overall inconsistency in approaches and deviation from recommendations could be a focus for improvement., Competing Interests: Conflict of interest: None declared., (© The Author(s) 2022. Published by Oxford University Press on behalf of the European Society of Cardiology. All rights reserved. For permissions, please email: journals.permissions@oup.com.)