Search

This paper describes an ultrasound system to monitor cardiac motion using miniature transducers attached directly to the epicardial surface. Our aim was to develop both a research tool for detailed studies of cardiac mechanics and a continuous, real time system for peri-operative evaluation of heart function. The system was tested on a porcine model. Two 3 mm diameter, 10 MHz ultrasound transducers were sutured to the epicardial surface. As the epicardial surface was the reference for the velocity and strain estimations, this procedure compensated for the motion of the heart. The short distance allowed for the use of high frequencies and pulse repetition rates. The system was driven in pulse-echo mode, using electronics developed for the application, and radio frequency (RF) lines were recorded at a pulse repetition rate of 2500 s -1 . The endocardial border was detected using an algorithm based on fuzzy logic with filtration to reduce noise and remove outliers, and the myocardium was divided into four layers. Inside the myocardium, radial tissue velocity as a function of depth was calculated from the recorded RF signals, and the velocity estimates were used to estimate radial strain rate and strain and to track the motion of the myocardial layers. The scope of this paper is technical, giving a detailed description of system design, hardware electronics and algorithms, with examples of processed velocity patterns and myocardial strain curves. The results from this study on a porcine model demonstrate the system's ability to estimate myocardial velocity and strain patterns and to track the motion of the myocardial layers, thereby obtaining detailed information of the regional function of the myocardium., (Copyright © 2019 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Background: In human medicine, right ventricular (RV) functional parameters represent a tool for risk stratification in patients with congestive heart failure caused by left heart disease. Little is known about RV alterations in dogs with left-sided cardiac disorders., Objectives: To assess RV and left ventricular (LV) function in dogs with myxomatous mitral valve disease (MMVD) with or without pulmonary hypertension (PH)., Animals: One-hundred and fourteen dogs: 28 healthy controls and 86 dogs with MMVD at different stages., Methods: Prospective observational study. Animals were classified as healthy or having MMVD at different stages of severity and according to presence or absence of PH. Twenty-eight morphological, echo-Doppler, and tissue Doppler imaging (TDI) variables were measured and comparison among groups and correlations between LV and RV parameters were studied., Results: No differences were found among groups regarding RV echo-Doppler and TDI variables. Sixteen significant correlations were found between RV TDI and left heart echocardiographic variables. Dogs with PH had significantly higher transmitral E wave peak velocity and higher E/e' ratio of septal (sMV) and lateral (pMV) mitral annulus. These 2 variables were found to predict presence of PH with a sensitivity of 84 and 72%, and a specificity of 71 and 80% at cut-off values of 10 and 9.33 for sMV E/e' and pMV E/e', respectively., Conclusions and Clinical Importance: No association between variables of RV function and different MMVD stage and severity of PH could be detected. Some relationships were found between echocardiographic variables of right and left ventricular function., (Copyright © 2016 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.)

Autocorrelation using in-phase and quadrature (IQ) signals suffers from aliasing when the velocity of rapidly moving tissue, such as the heart wall, is measured. In the present study, a simple method was proposed to expand the aliasing limit. In the proposed method, the velocity difference between two successive frames (corresponding to acceleration) of tissue was also estimated directly from IQ signals. When aliasing occurs in the velocity in the current frame, which was estimated from IQ signals, the velocity in the current frame was corrected by adding the velocity difference to the velocity in the previous frame. Using this procedure, the velocity can be estimated if the difference between velocities in the current and previous frames is less than the aliasing limit. The velocity of the posterior heart wall in the longitudinal-axis view of about 0.08 m/s could be estimated under the aliasing limit of the conventional autocorrelation method of 0.047 m/s. Myocardial velocity over the conventional aliasing limit could be measured by the proposed method.

Background: The interaction between local myocardial motion and blood flow dynamics should be assessed to evaluate left ventricular pump function., Methods: The contour map of the absolute value of blood flow velocity in the left ventricle (LV) was drawn. The ridgeline of the contour was defined as the "flow axis line". LV wall motion was assessed by the tracing endocardial border in consecutive B-mode images and by myocardial tissue velocity distribution obtained by the optical flow method., Results: The location of the main flow axis line was affected by the local myocardial movement in the short axis direction. The flow axis line method is superior to the previous investigations on two-dimensional blood flow analysis because it considered three-dimensional blood flow., Conclusions: The flow axis line represents not only intracardiac blood flow structure but also its interaction with the cardiac wall motion.