Search

A new high energy proton radiography facility PRIOR-II (Proton Microscope for FAIR) has been designed, constructed, and successfully commissioned at the GSI Helmholtzzentrum für Schwerionenforschung (Darmstadt, Germany) pushing the technical boundaries of charged particle radiography with normal conducting magnets to the limits. The setup is foreseen to become a new and powerful user facility for carrying out fundamental science experiments in the fields of plasma and shock wave physics, material science, and medical physics. It will help address several unsolved scientific challenges, which require high-speed and precise non-invasive diagnostic methods capable of probing matter with up to 100 g/cm2 areal density. PRIOR-II is specifically designed to utilize the full timing capabilities of the SIS-18 synchrotron at GSI for ultra-fast dynamic experiments with up to 4 GeV protons and will also be fielded at the future FAIR facility, where higher proton energies and beam intensities will be available. This will enable experiment geometries with even higher areal densities, more flexible experiment timing, and further enhanced spatial resolution., (© 2024 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).)

Permanent magnet quadrupoles (PMQs) are an alternative to common electromagnetic quadrupoles especially for fixed rigidity beam transport scenarios at particle accelerators. Using those magnets for experimental setups can result in certain scenarios, in which a PMQ itself may be exposed to a large amount of primary and secondary particles with a broad energy spectrum, interacting with the magnetic material and affecting its magnetic properties. One specific scenario is proton microscopy, where a proton beam traverses an object and a collimator in which a part of the beam is scattered and deflected into PMQs used as part of a diagnostic system. During the commissioning of the PRIOR (Proton Microscope for Facility for Antiproton and Ion Research) high energy proton microscope facility prototype at Gesellschaft für Schwerionenforschung in 2014, a significant reduction of the image quality was observed which was partially attributed to the demagnetization of the used PMQ lenses and the corresponding decrease of the field quality. In order to study this phenomenon, Monte Carlo simulations were carried out and spare units manufactured from the same magnetic material-single wedges and a fully assembled PMQ module-were deliberately irradiated by a 3.6 GeV intense proton beam. The performed investigations have shown that in proton radiography applications the above described scattering may result in a high irradiation dose in the PMQ magnets. This did not only decrease the overall magnetic strength of the PMQs but also caused a significant degradation of the field quality of an assembled PMQ module by increasing the parasitic multipole field harmonics which effectively makes PMQs impractical for proton radiography applications or similar scenarios.

The charged particle community is looking for techniques exploiting proton interactions instead of X-ray absorption for creating images of human tissue. Due to multiple Coulomb scattering inside the measured object it has shown to be highly non-trivial to achieve sufficient spatial resolution. We present imaging of biological tissue with a proton microscope. This device relies on magnetic optics, distinguishing it from most published proton imaging methods. For these methods reducing the data acquisition time to a clinically acceptable level has turned out to be challenging. In a proton microscope, data acquisition and processing are much simpler. This device even allows imaging in real time. The primary medical application will be image guidance in proton radiosurgery. Proton images demonstrating the potential for this application are presented. Tomographic reconstructions are included to raise awareness of the possibility of high-resolution proton tomography using magneto-optics.

Recently, a new high energy proton microscopy facility PRIOR (Proton Microscope for FAIR Facility for Anti-proton and Ion Research) has been designed, constructed, and successfully commissioned at GSI Helmholtzzentrum für Schwerionenforschung (Darmstadt, Germany). As a result of the experiments with 3.5-4.5 GeV proton beams delivered by the heavy ion synchrotron SIS-18 of GSI, 30 μm spatial and 10 ns temporal resolutions of the proton microscope have been demonstrated. A new pulsed power setup for studying properties of matter under extremes has been developed for the dynamic commissioning of the PRIOR facility. This paper describes the PRIOR setup as well as the results of the first static and dynamic proton radiography experiments performed at GSI.

High-energy proton microscopy provides unique capabilities in penetrating radiography including the combination of high spatial resolution and field-of-view, dynamic range of density for measurements, and reconstructing density variations to less than 1% inside volumes and in situ environments. We have recently proposed to exploit this novel proton radiography technique for image-guided stereotactic particle radiosurgery. Results of a first test for imaging biological and tissue-equivalent targets with high-energy (800 MeV) proton microscopy are presented here. Although we used a proton microscope setup at ITEP (Moscow, Russia) optimized for fast dynamic experiments in material research, we could reach a spatial resolution of 150 μm with approximately 10(10) protons per image. The potential of obtaining high-resolution online imaging of the target using a therapeutic proton beam in the GeV energy region suggests that high-energy proton microscopy may be used for image-guided proton radiosurgery., (Copyright © 2012 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

High-energy heavy ions are an ideal tool to generate homogeneously excited, extended volumes of nonthermal plasmas. Here, the high-energy loss (dE/dx) and absolute power deposition of heavy ions interacting with matter has been used to pump an ultraviolet laser. A pulsed 70 MeV/u 238U beam with up to 2.5 x 10(9) particles in approximately 100 ns beam bunches was stopped in a 1.2 m long laser cell filled with a 1.6 bar Ar-Kr-F2 mixture (typically 50%:49.9%:0.1%). Laser effect on the 248 nm KrF* excimer transition is clearly demonstrated.

The subject of high-energy-density (HED) states in matter is of considerable importance to numerous branches of basic as well as applied physics. Intense heavy-ion beams are an excellent tool to create large samples of HED matter in the laboratory with fairly uniform physical conditions. Gesellschaft für Schwerionenforschung, Darmstadt, is a unique worldwide laboratory that has a heavy-ion synchrotron, SIS18, that delivers intense beams of energetic heavy ions. Construction of a much more powerful synchrotron, SIS100, at the future international facility for antiprotons and ion research (FAIR) at Darmstadt will lead to an increase in beam intensity by 3 orders of magnitude compared to what is currently available. The purpose of this Letter is to investigate with the help of two-dimensional numerical simulations, the potential of the FAIR to carry out research in the field of HED states in matter.

A method for beam shaping based on fitting the power moments of the final beam intensity distribution and independent of the optical system particularities is suggested. It is shown how one can analytically calculate any moment of the final phase space distribution using the moments of the initial distribution and the optical system transfer map. Numerical tests carried out for a final focus system have demonstrated the usefulness of the approach developed here.

A specifically tailored plasma lens could shape a high-energy, heavy-ion beam into the form of a hollow cylinder without loss of beam intensity. It has been experimentally confirmed that both a positive as well as a negative radial gradient of the current density in the active plasma lens can be the underlying principle. Calculations were performed that yield the ideal current density distribution for both cases. A numerical simulation of an experiment with an intense ion beam highlights that the shaping of the beam increases the achievable compression in a lead sample.