Search

Perovskite materials are promising contenders as the active layer in light-harvesting and light-emitting applications if their long-term stability can be sufficiently increased. Chemical and structural engineering are shown to enhance long-term stability, but the increased complexity of the material system also leads to inhomogeneous functional properties across various length scales. Thus, scanning probe and high-resolution microscopy characterization techniques are needed to reveal the role of local defects and the results promise to act as the foundation for future device improvements. A look at the parameter space: technique-specific sample penetration depth versus probe size highlights a gap in current methods. High spatial resolution combined with a deep penetration depth is not yet achievable. However, multimodal measurement technique may be the key to covering this parameter space. In this perspective, current advanced spectro-microscopy methods which have been applied to perovskite materials are highlighted., (© 2024 Wiley‐VCH GmbH.)

Materials in crystalline form possess translational symmetry (TS) when the unit cell is repeated in real space with long- and short-range orders. The periodic potential in the crystal regulates the electron wave function and results in unique band structures, which further define the physical properties of the materials. Amorphous materials lack TS due to the randomization of distances and arrangements between atoms, causing the electron wave function to lack a well-defined momentum. High entropy materials provide another way to break the TS by randomizing the potential strength at periodic atomic sites. The local elemental distribution has a great impact on physical properties in high entropy materials. It is critical to distinguish elements at the sub-nanometer scale to uncover the correlations between the elemental distribution and the material properties. Here, the use of synchrotron X-ray scanning tunneling microscopy (SX-STM) with sub-nm scale resolution in identifying elements on a high entropy alloy (HEA) surface is demonstrated. By examining the elementally sensitive X-ray absorption spectra with an STM tip to enhance the spatial resolution, the elemental distribution on an HEA's surface at a sub-nm scale is extracted. These results open a pathway towards quantitatively understanding high entropy materials and their material properties., (© 2024 Wiley‐VCH GmbH.)

We investigate the limit of X-ray detection at room temperature on rare-earth molecular films using lanthanum and a pyridine-based dicarboxamide organic linker as a model system. Synchrotron X-ray scanning tunneling microscopy is used to probe the molecules with different coverages on a HOPG substrate. X-ray-induced photocurrent intensities are measured as a function of molecular coverage on the sample, allowing a correlation of the amount of La ions with the photocurrent signal strength. X-ray absorption spectroscopy shows cogent M 4,5 absorption edges of the lanthanum ion originated by the transitions from the 3d 3/2 and 3d 5/2 to 4f orbitals. X-ray absorption spectra measured in the tunneling regime further reveal an X-ray excited tunneling current produced at the M 4,5 absorption edge of the La ion down to the ultimate atomic limit at room temperature., Competing Interests: The authors declare no competing financial interest., (© 2023 UChicago Argonne, LLC, Operator of Argonne National Laboratory. Published by American Chemical Society.)

Since the discovery of X-rays by Roentgen in 1895, its use has been ubiquitous, from medical and environmental applications to materials sciences 1-5 . X-ray characterization requires a large number of atoms and reducing the material quantity is a long-standing goal. Here we show that X-rays can be used to characterize the elemental and chemical state of just one atom. Using a specialized tip as a detector, X-ray-excited currents generated from an iron and a terbium atom coordinated to organic ligands are detected. The fingerprints of a single atom, the L 2,3 and M 4,5 absorption edge signals for iron and terbium, respectively, are clearly observed in the X-ray absorption spectra. The chemical states of these atoms are characterized by means of near-edge X-ray absorption signals, in which X-ray-excited resonance tunnelling (X-ERT) is dominant for the iron atom. The X-ray signal can be sensed only when the tip is located directly above the atom in extreme proximity, which confirms atomically localized detection in the tunnelling regime. Our work connects synchrotron X-rays with a quantum tunnelling process and opens future X-rays experiments for simultaneous characterizations of elemental and chemical properties of materials at the ultimate single-atom limit., (© 2023. This is a U.S. Government work and not under copyright protection in the US; foreign copyright protection may apply.)

Complexes containing rare-earth ions attract great attention for their technological applications ranging from spintronic devices to quantum information science. While charged rare-earth coordination complexes are ubiquitous in solution, they are challenging to form on materials surfaces that would allow investigations for potential solid-state applications. Here we report formation and atomically precise manipulation of rare-earth complexes on a gold surface. Although they are composed of multiple units held together by electrostatic interactions, the entire complex rotates as a single unit when electrical energy is supplied from a scanning tunneling microscope tip. Despite the hexagonal symmetry of the gold surface, a counterion at the side of the complex guides precise three-fold rotations and 100% control of their rotational directions is achieved using a negative electric field from the scanning probe tip. This work demonstrates that counterions can be used to control dynamics of rare-earth complexes on materials surfaces for quantum and nanomechanical applications., (© 2022. The Author(s).)

Photon upconversion, particularly via triplet-triplet annihilation (TTA), could prove beneficial in expanding the efficiencies and overall impacts of optoelectronic devices across a multitude of technologies. The recent development of bulk metal halide perovskites as triplet sensitizers is one potential step toward the industrialization of upconversion-enabled devices. Here, we investigate the impact of varying additions of bromide into a lead iodide perovskite thin film on the TTA upconversion process in the annihilator molecule rubrene. We find an interplay between the bromide content and the overall device efficiency. In particular, a higher bromide content results in higher internal upconversion efficiencies enabled by more efficient charge extraction at the interface likely due to a more favorable band alignment. However, the external upconversion efficiency decreases as the absorption cross section in the near infrared is reduced. The highest upconversion performance is found in our study for a bromide content of 5%. This result can be traced back to a high absorption cross section in the near infrared and higher photoluminescence quantum yield in comparison to the iodide-only perovskite and an increased driving force for charge transfer.

Triplet-triplet annihilation-based photon upconversion (UC) using bulk perovskite sensitizers has been previously shown to facilitate efficient UC at low fluences. However, the fabrication of the UC devices has not been fully optimized; thus, there is room for improvement. Here, we apply techniques that have been successful in enhancing the performance of perovskite solar cells in order to also improve perovskite-sensitized UC devices. In particular, we investigate the use of a post-fabrication thermal annealing step, overstoichiometric vs stoichiometric addition of PbI 2 to the perovskite precursors, methylammonium vs formamidinium cation-rich lead halide perovskite compositions, and the use of different solvents for the annihilator molecules on the perovskite/annihilator interface. We find that excess PbI 2 does not significantly affect the UC process, while the perovskite composition is crucial for the yield of extracted carriers across the interface. Comparing toluene and chlorobenzene, we find that the solvent used to deposit the annihilator is also a key factor in the overall device performance. Moreover, we find that thermal annealing of the whole device architecture significantly improves the UC performance by a factor of three.

In this review, we highlight the current advancements in the field of triplet sensitization by three-dimensional (3D) perovskite nanocrystals and bulk films. First introduced in 2017, 3D perovskite sensitized upconversion (UC) is a young fast-evolving field due to the tunability of the underlying perovskite material. By tuning the perovskite bandgap, visible-to-ultraviolet, near-infrared-to-visible or green-to-blue UC has been realized, which depicts the broad applicability of this material. As this research field is still in its infancy, we hope to stimulate the field by highlighting the advantages of these perovskite nanocrystals and bulk films, as well as shedding light onto the current drawbacks. In particular, the keywords toxicity, reproducibility and stability must be addressed prior to commercialization of the technology. If successful, photon interconversion is a means to increase the achievable efficiency of photovoltaic cells beyond its current limits by increasing the window of useable wavelengths., Competing Interests: The authors have declared that no competing interests exist.

Recent advances in perovskite-sensitized photon upconversion via triplet-triplet annihilation (TTA) in rubrene have yielded several unanswered questions about the underlying mechanism and processes occurring at the interface. In particular, the near-infrared perovskite emission is not significantly quenched and a rapid reversible "photobleach" of the upconverted emission can be observed under fairly low excitation densities of 3.2 mW/cm 2 . In this contribution, we investigate the perovskite/rubrene interface in more detail and conclude that noncovalent interactions between the organic layer and the perovskite result in surface trap passivation. In addition, band bending results in a space charge region at the perovskite/rubrene interface, which "precharges" the rubrene with holes. Upon initial illumination, electrons can rapidly transfer to the excited triplet state of rubrene, followed by efficient TTA upconversion. As the device is continuously illuminated, the existing holes are consumed and a new equilibrium is reached, resulting in the previously investigated steady-state upconversion efficiency.

The emerging field of lead halide perovskite-sensitized triplet-triplet annihilation (TTA) in rubrene shows great promise in upconversion applications. By rapidly transferring single charge carriers instead of bound triplet states, perovskites enable a high triplet population in rubrene, yielding low I th values. In this contribution, we investigate the role of the triplet population on the upconverted emission. Interestingly, two independent rates of TTA can be observed, as well as a sharp drop in the visible emission intensity over several seconds. This effect can be attributed to the triplet-density-based diffusion length: (i) at low triplet populations slow diffusion-mediated TTA yields singlets far from the interface and (ii) higher triplet populations lead to rapid TTA close to the perovskite/rubrene interface. Because of the proximity of the strongly absorbing perovskite, the singlet states created closer to the interface undergo stronger back-transfer to the perovskite film and therefore appear to exhibit a lower photoluminescence quantum yield.

Silicon dominates contemporary solar cell technologies 1 . But when absorbing photons, silicon (like other semiconductors) wastes energy in excess of its bandgap 2 . Reducing these thermalization losses and enabling better sensitivity to light is possible by sensitizing the silicon solar cell using singlet exciton fission, in which two excited states with triplet spin character (triplet excitons) are generated from a photoexcited state of higher energy with singlet spin character (a singlet exciton) 3-5 . Singlet exciton fission in the molecular semiconductor tetracene is known to generate triplet excitons that are energetically matched to the silicon bandgap 6-8 . When the triplet excitons are transferred to silicon they create additional electron-hole pairs, promising to increase cell efficiencies from the single-junction limit of 29 per cent to as high as 35 per cent 9 . Here we reduce the thickness of the protective hafnium oxynitride layer at the surface of a silicon solar cell to just eight angstroms, using electric-field-effect passivation to enable the efficient energy transfer of the triplet excitons formed in the tetracene. The maximum combined yield of the fission in tetracene and the energy transfer to silicon is around 133 per cent, establishing the potential of singlet exciton fission to increase the efficiencies of silicon solar cells and reduce the cost of the energy that they generate.

The role of the alkali metal cations in halide perovskite solar cells is not well understood. Using synchrotron-based nano-x-ray fluorescence and complementary measurements, we found that the halide distribution becomes homogenized upon addition of cesium iodide, either alone or with rubidium iodide, for substoichiometric, stoichiometric, and overstoichiometric preparations, where the lead halide is varied with respect to organic halide precursors. Halide homogenization coincides with long-lived charge carrier decays, spatially homogeneous carrier dynamics (as visualized by ultrafast microscopy), and improved photovoltaic device performance. We found that rubidium and potassium phase-segregate in highly concentrated clusters. Alkali metals are beneficial at low concentrations, where they homogenize the halide distribution, but at higher concentrations, they form recombination-active second-phase clusters., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

Nature employs self-assembly to fabricate the most complex molecularly precise machinery known to man. Heteromolecular, two-dimensional self-assembled networks provide a route to spatially organize different building blocks relative to each other, enabling synthetic molecularly precise fabrication. Here we demonstrate optoelectronic function in a near-to-monolayer molecular architecture approaching atomically defined spatial disposition of all components. The active layer consists of a self-assembled terrylene-based dye, forming a bicomponent supramolecular network with melamine. The assembly at the graphene-diamond interface shows an absorption maximum at 740 nm whereby the photoresponse can be measured with a gallium counter electrode. We find photocurrents of 0.5 nA and open-circuit voltages of 270 mV employing 19 mW cm(-2) irradiation intensities at 710 nm. With an ex situ calculated contact area of 9.9 × 10(2) μm(2), an incident photon to current efficiency of 0.6% at 710 nm is estimated, opening up intriguing possibilities in bottom-up optoelectronic device fabrication with molecular resolution.

Electronically excited orbitals play a fundamental role in chemical reactivity and spectroscopy. In nanostructures, orbital shape is diagnostic of defects that control blinking, surface carrier dynamics, and other important optoelectronic properties. We capture nanometer resolution images of electronically excited PbS quantum dots (QDs) by single molecule absorption scanning tunneling microscopy (SMA-STM). Dots with a bandgap of ∼1 eV are deposited on a transparent gold surface and optically excited with red or green light to produce hot carriers. The STM tip-enhanced laser light produces a large excited-state population, and the Stark effect allows transitions to be tuned into resonance by changing the sample voltage. Scanning the QDs under laser excitation, we were able to image electronic excitation to different angular momentum states depending on sample bias. The shapes differ from idealized S- or P-like orbitals due to imperfections of the QDs. Excitation of adjacent QD pairs reveals orbital alignment, evidence for electronic coupling between dots. Electronic structure modeling of a small PbS QD, when scaled for size, reveals Stark tuning and variation in the transition moment of different parity states, supporting the simple one-electron experimental interpretation in the hot carrier limit. The calculations highlight the sensitivity of orbital density to applied field, laser wavelength, and structural fluctuations of the QD.

Chiral junctions of carbon nanotubes have the potential of serving as optically or electrically controllable switches. To investigate optoelectronic tuning of a chiral junction, we stamp carbon nanotubes onto a transparent gold surface and locate a tube with a semiconducting-metallic junction. We image topography, laser absorption at 532 nm, and measure I-V curves of the junction with nanometer spatial resolution. The bandgaps on both sides of the junction depend on the applied tip field (Stark effect), so the semiconducting-metallic nature of the junction can be tuned by varying the electric field from the STM tip. Although absolute field values can only be estimated because of the unknown tip geometry, the bandgap shifts are larger than expected from the tip field alone, so optical rectification of the laser and carrier generation by the laser must also affect the bandgap switching of the chiral junction.

Molecular self-assembly is a versatile nanofabrication technique with atomic precision en route to molecule-based electronic components and devices. Here, we demonstrate a three-dimensional, bicomponent supramolecular network architecture on an all-carbon sp(2)-sp(3) transparent platform. The substrate consists of hydrogenated diamond decorated with a monolayer graphene sheet. The pertaining bilayer assembly of a melamine-naphthalenetetracarboxylic diimide supramolecular network exhibiting a nanoporous honeycomb structure is explored via scanning tunneling microscopy initially at the solution-highly oriented pyrolytic graphite interface. On both graphene-terminated copper and an atomically flat graphene/diamond hybrid substrate, an assembly protocol is demonstrated yielding similar supramolecular networks with long-range order. Our results suggest that hybrid platforms, (supramolecular) chemistry and thermodynamic growth protocols can be merged for in situ molecular device fabrication.