Search

Silicon is the cornerstone of electronics and photonics. In this context, almost all integrated devices derived from two-dimensional (2D) materials stay rooted in silicon technology. However, as the growth substrate, silicon has long been thought to be a hindrance for growing 2D materials through bottom-up methods that require high growth temperatures, and thus, indirect routes are usually considered instead. Although promising growth of large-area 2D materials on silicon has been demonstrated, the direct growth of single-crystalline materials using low-thermal-budget synthesis methods remains challenging. Here, we report the room-temperature growth of millimeter-scale single-crystal 2D metal halides on silicon substrates with a hydroxyl-terminated surface. Theoretical calculations reveal that the activation energy for surface diffusion can be reduced by an order of magnitude by terminating the surface with hydroxyl groups, from which on-silicon growth is greatly facilitated at room temperature and enables a 4-order-of-magnitude increase in area. The high quality and uniformity of the resulting single crystals are further evidenced. The optoelectronic devices employing the as-grown materials show an ultralow dark current of 10 -13 A and a high detectivity of 10 13 Jones, thereby corroborating a weak-light detection ability. These results would point to a rich space of surface modulation that can be used to surmount current limitations and demonstrate a promising strategy for growing 2D materials directly on silicon at room temperature to produce large single crystals.

Nucleotide-binding oligomerization domain (NOD)-like receptor type 2 protein (NLRP2) was reported to inhibit NF-κB in response to inflammatory stimuli, but its role in tumors remains elusive. We screened out NLRP2 from mouse models of breast cancer metastasis. Bioinformatics analysis showed NLRP2 expression was positively correlated with survival rate and negatively correlated with the potential of cancer metastasis. Its significance in Triple-Negative Breast Cancer (TNBC) was investigated by gain- and loss-of-function studies in vivo and vitro. Re-expression of NLRP2 dramatically inhibited the growth and metastasis of the xenograft model of MDA-MB-231 cells. Mechanically, NLRP2 confined hnRNPK within cytoplasm, which in turn blocked vimentin mRNA production. Not only that, NLRP2 further enhanced the H 2 O 2 -induced high level of p53&Bax and hence dramatically increased the apoptosis rate (fivefold). Likewise, carboplatin-treated cells showed decreased cell viability, suggesting that patients of TNBC with high level of NLRP2 respond well to chemotherapeutics. Under the stimulus of H 2 O 2 , NLRP2-hnRNPK no longer stayed in the cytoplasm, but entered the nucleus to increase the expression of p53 and hence enhanced corresponding apoptosis effect, increasing Bax expression. It suggested that NLRP2 helps p53 enter the nucleus to induce apoptosis. This study revealed a novel function of NLRP2 that modulated oncogenic and anti-oncogenic characteristics of hnRNPK, and provided a new biomarker for TNBC chemotherapy., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Waterflooding is one of the geotechniques used to recover fuel sources from nanoporous geological formations. The scientific understanding of the process that involves the multiphase flow of nanoconfined fluids, however, has lagged, mainly due to the complex nanopore geometries and chemical compositions. To enable the benchmarked flow of nanoconfined fluids, architected geomaterials, such as synthesized mesoporous silica with tunable pore shapes and surface chemical properties, are used for designing and conducting experiments and simulations. This work uses a modified many-body dissipative particle dynamics (mDPD) model with accurately calibrated parameters to perform parametric flow simulations for studying the influences of waterflooding-driven power, pore shape, surface roughness, and surface wettability on the multiphase flow in heptane-saturated silica nanochannels. Remarkably, up to an 80% reduction in the effective permeability is found for water-driven heptane flow in a baseline 4.5-nm-wide slit channel when compared with the Hagen-Poiseuille equation. In the 4.5-nm-wide channels with architected surface roughness, the flow rate is found to be either higher or lower than the baseline case, depending on the shape and size of cross sections. High wettability of the solid surface by water is essential for achieving a high recovery of heptane, regardless of surface roughness. When the solid surface is less wetting or nonwetting to water, the existence of an optimal waterflooding-driven power is found to allow for the highest possible recovery. A detailed analysis of the evolution of the transient water-heptane interface in those nanochannels is presented to elucidate the underlying mechanisms that impact or dictate the multiphase flow behaviors.

Sintered agglomerate of synthetic mesoporous silica nanoparticles (MSNs) is an architected geomaterial that provides confinement-mediated flow and transport properties of fluids needed for environmental research such as geological subsurface energy storage or carbon capture. The design of those properties can be guided by numerical simulations but is hindered by the lack of method to characterize the permeable pores within MSNs due to pore size. This work uses the advances of an Individual Particle cryogenic transmission Electron Tomography (IPET) technique to obtain detailed 3D morphology of monodispersed MSNs with diameters below 50 nm. The 3D reconstructed density-maps show the diameters of those MSNs vary from 35-46 nm, containing connected intraparticle pores in diameter of 2-20 nm with a mean of 9.2 ± 3 nm, which is comparable to the mean interparticle pore diameters in sintered agglomerate. The characterization of the pore shape and dimensions provides key information for estimating the flow and transport properties of fluids within the sintered agglomerate of those MSNs and for modeling the atomic MSN structures needed for pore-fluid simulations., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Organic field-effect transistors (OFETs) with polymer charge-trapping dielectric, which exhibit many advantages over Si-based memory devices such as low cost, light weight, and flexibility, still suffer challenges in practical application due to the unsatisfied endurance characteristics and even the lack of fundamental of behind mechanism. Here, we revealed that the degradation of endurance characteristics of pentacene OFET with poly(2-vinyl naphthalene) (PVN) as charge-storage layer is dominated by the deep hole-traps in PVN by using the photo-stimulated charge de-trapping technique with the fiber-coupled monochromatic-light probes. The depth distribution of hole-traps in PVN film of pentacene OFET is also provided., (© 2023. The Author(s).)

A modified many-body dissipative particle dynamics (mDPD) model is rigorously calibrated to achieve realistic fluid-fluid/solid interphase properties and applied for mesoscale flow simulations to elucidate the transport mechanisms of heptane liquid and water, respectively, through pore networks formed by packed silica nanoparticles with a uniform diameter of 30 nm. Two million CPU core hours were used to complete the simulation studies. Results show reduction of permeability by 54-64% in heptane flow and by 88-91% in water flow, respectively, compared to the Kozeny-Carman equation. In these nanopores, a large portion of the fluids are in the near-wall regions and thus not mobile due to the confinement effect, resulting in reduced hydraulic conductivity. Moreover, intense oscillations in the calculated flow velocities also indicate the confinement effect that contests the external driven force to flow. The generic form of Darcy's law is considered valid for flow through homogeneous nanopore networks, while permeability depends collectively on pore size and surface wettability. This fluid-permeability dependency is unique to flow in nanopores. In addition, potential dependence of permeability on pore connectivity is observed when the porosity remains the same in different core specimens.

Organic field-effect transistors (OFETs) as nonvolatile memory units are essential for lightweight and flexible electronics, yet the practical application remains a great challenge. The positively charged defects in pentacene film at the interface between pentacene and polymer caused by environmental conditions, as revealed by theoretical and experimental research works, result in unacceptable high programming/erasing (P/E) gate voltages in pentacene OFETs with polymer charge-trapping dielectric. Here, we report a pentacene OFET in which an n-type semiconductor layer was intercalated between a polymer and a blocking insulator. In this structure, the hole barrier caused by the defect layer can be adjusted by the thickness and charge-carrier density of the n-type semiconductor interlayer based on the electrostatic induction theory. This idea was implemented in an OFET structure Cu/pentacene/poly(2-vinyl naphthalene) (PVN)/ZnO/SiO 2 /Si(p + ), which shows low P/E gate voltages, large field-effect mobility (0.73 cm 2 V -1 s -1 ), fast P/E speeds (responding to a pulse width of 5 × 10 -4 s), and long retention time in air.

The phase behavior of hydrocarbon fluids confined in porous media has been reported to deviate significantly from that in the bulk environment due to the existence of sub-10 nm pores. Though experiments and simulations have measured the bubble/dew points and sorption isotherms of hydrocarbons confined in both natural and synthetic nanopores, the confinement effects in terms of the strength of fluid-pore interactions tuned by surface wettability and chemistry have received comparably less discussion. More importantly, the underlying physics of confinement-induced phenomena remain obfuscated. In this work, we studied the phase behavior and capillary condensation of n -hexane to understand the effects of confinement at the molecular level. To systematically investigate the pore effects, we constructed two types of wall confinements; one is a structureless virtual wall described by the Steele potential and the other one is an all-atom amorphous silica structure with surface modified by hydroxyl groups. Our numerical results demonstrated the importance of fluid-pore interaction, pore size, and pore morphology effects in mediating the pressure-volume-temperature (PVT) properties of hydrocarbons. The most remarkable finding of this work was that the saturation pressure predicted from the van der Waals-type adsorption isothermal loop could be elevated or suppressed relative to the bulk phase, as illustrated in the graphical abstract. As the surface energy (i.e., fluid-pore interaction) decreased, the isothermal vapor pressure increased, indicating a greater preference for the fluid to exist in the vapor state. Sufficient reduction of the fluid-pore interactions could even elevate the vapor pressure above that of the bulk fluid.

With structural miniaturization down to the nanoscale, some detectable parameters of materials no longer remain constant. For NiO nanoparticles example, Raman shift and Néel temperature increase while optical band gap decreases with increasing the nanoparticle size. Herein, we developed the analytic models to describe the size dependence of these above-mentioned seemingly uncorrelated parameters for NiO nanoparticles, based on the average coordination number-dependent cohesive energy model. Consistency between our theoretical predictions and the corresponding experimental results not only verified the accuracy of our developed models but also provided insight into the essentiality of cohesive energy in describing the effect of size on the materials properties of NiO nanoparticles.

The magnetism of hole doped 1T-MX 2 (M = Zr, Hf; X = S, Se) monolayers is systematically studied by using first principles density functional calculations. The pristine 1T-MX 2 monolayers are semiconductors with nonmagnetic ground states, which can be transformed to ferromagnetic states by the approach of hole doping. For the unstrained monolayers, the spontaneous magnetization appears once above the critical hole density (10 14 cm -2 ), where the p orbital of S or Se atoms contributes the most of the magnetic moment. As the tensile strains exceed 4%, the magnetic moments per hole of ZrS 2 and HfS 2 monolayers increase sharply to a saturated value with increasing hole density, implying obvious advantages over the unstrained monolayers. The phonon dispersion calculations for the strained ZrS 2 and HfS 2 monolayers indicate that they can keep the dynamical stability by hole doping. Furthermore, we propose that the fluorine atom modified ZrS 2 monolayer could obtain stable ferromagnetism. The magnetism in hole doped 1T-MX 2 (M = Zr, Hf; X = S, Se) monolayers has great potential for developing spintronic devices with desirable applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Bismuth triiodide, BiI 3 , is one of the promising 2D layered materials from the family of metal halides. The unique electronic structure and properties make it an attractive material for the room-temperature gamma/X-ray detectors, high-efficiency photovoltaic absorbers, and Bi-based organic-inorganic hybrid perovskites. Other possibilities including optoelectronic devices and optical circuits are envisioned but rarely experimentally confirmed yet. Here, we report the synthesis of vertical 2D BiI 3 nanoplates using the physical vapor deposition mechanism. The obtained products were found easy to be separated and transferred to other substrates. Photodetectors employing such 2D nanoplates on polyethylene terephthalate substrate are demonstrated to be quite sensitive to red light (635 nm) with good responsivity (2.8 A W -1 ), fast stable photoresponse (3/9 ms for raise/decay times), and remarkable specific detectivity (1.2 × 10 12 jones), which attest to high comparability of the assembled components with many latest 2D nanostructured light sensors. In addition, such photodetectors exhibit outstanding mechanical stability and durability under different bending strains within the theoretically affordable levels, suggesting a variety of potential applications of 2D BiI 3 for flexible devices.

We propose a two-dimensional (2D) tetragonal material: an yttrium nitride (t-YN) monolayer, with a distinguished combination of mechanical and electronic properties based on first-principles calculations. We find that the t-YN monolayer is a low direct band gap semiconductor (0.55 eV) with strong anisotropic mechanical and electronic properties. We also identify that the t-YN monolayer to be a 2D ferroelastic material with a reversible strain of about 14.4%, indicating that the anisotropic properties of the t-YN monolayer can be switched by applying external stress. Furthermore, the moderate-switching barrier (33 meV/atom) of ferroelastic lattice rotation renders the switchable anisotropic properties accessible experimentally. These outstanding properties make the t-YN monolayer a promising switchable anisotropic 2D material for electronic and mechanical applications.

Using first-principles calculations, we designed a two-dimensional material, monolayer AgBiP 2 Se 6 , with the thickness of only 6 Å, which exhibited out-plane ferroelectricity. The ground state of the monolayer AgBiP 2 Se 6 was not purely ferroelectric since the out-plane ferroelectricity originated from the compensated ferrielectric state: the off-centering antiparallel displacements of Ag + and Bi 3+ ions. The compensated ferrielectric ordering has superiority on reducing the depolarization field to stabilize the ferroelectricity. Furthermore, together with strong visible-light adsorption and suitable band edge alignments, we proposed the monolayer AgBiP 2 Se 6 as a visible-light photocatalyst for water-splitting as the out-plane polarization could enhance the electron-hole separation. Our results offer a new way to overcome the critical thickness limitation of nanoscale ferroelectrics. The out-plane ferroelectricity in monolayer AgBiP 2 Se 6 has great potential for developing various devices with desirable applications.

By first-principles calculations, the magnetism of hole doped tin dichalcogenides SnX 2 (X = S, Se) monolayers is systematically studied. It is found that a phase transition from nonmagnetic to ferromagnetic ground state appears once above the critical hole density (~10 14  cm -2 ). The spin magnetic moment can maintain a magnitude of 1.0 μ B /hole with excellent stability of ferromagnetic state. Furthermore, we demonstrate that strain is very useful to modulate the DOS near the valence band, resulting in the reduction of the critical hole density to ~10 13  cm -2 when the strain reaches 4% (6%) in SnS 2 (SnSe 2 ), which can be realized in common field effect transistors. Moreover, the phonon dispersion calculations for the strained SnX 2 monolayers indicate that they can keep the dynamical stability under the hole doping. Therefore, the strain tunable magnetic transition in hole doped tin dichalcogenides indicates their potential promising applications in spintronic devices.

Clear understanding the mechanism of resistive switching is the important prerequisite for the realization of high performance nonvolatile resistive random access memory. In this paper, binary metal oxide MoO x layer sandwiched by ITO and Pt electrodes was taken as a model system, reversible transition of abnormal and normal bipolar resistive switching (BRS) in dependence on the maximum voltage was observed. At room temperature, below a critical maximum voltage of 2.6 V, butterfly shaped I-V curves of abnormal BRS has been observed with low resistance state (LRS) to high resistance state (HRS) transition in both polarities and always LRS at zero field. Above 2.6 V, normal BRS was observed, and HRS to LRS transition happened with increasing negative voltage applied. Temperature dependent I-V measurements showed that the critical maximum voltage increased with decreasing temperature, suggesting the thermal activated motion of oxygen vacancies. Abnormal BRS has been explained by the partial compensation of electric field from the induced dipoles opposite to the applied voltage, which has been demonstrated by the clear amplitude-voltage and phase-voltage hysteresis loops observed by piezoelectric force microscopy. The normal BRS was due to the barrier modification at Pt/MoO x interface by the accumulation and depletion of oxygen vacancies.

Ferroelectric tunnel junctions (FTJs) are quantum nanostructures that have great potential in the hardware basis for future neuromorphic applications. Among recently proposed possibilities, the artificial cognition has high hopes, where encoding, training, memory solidification and retrieval constitute a whole chain that is inseparable. However, it is yet envisioned but experimentally unconfirmed. The poor retention or short-term store of tunneling electroresistance, in particular the intermediate states, is still a key challenge in FTJs. Here we report the encoding, training and retrieval in BaTiO3 FTJs, emulating the key features of information processing in terms of cognitive neuroscience. This is implemented and exemplified through processing characters. Using training inputs that are validated by the evolution of both barrier profile and domain configuration, accurate recalling of encoded characters in the retrieval stage is demonstrated.

The accurate calculation of decimal fractions is still a challenge for the binary-coded computations that rely on von Neumann paradigm. Here, we report a kind of memristive abacus based on synaptic Ag-Ge-Se device, in which the memristive long-term potentiation and depression are caused by a chemically driven phase transformation. The growth and the rupture of conductive Ag₂Se dendrites are confirmed via in situ transmission electron microscopy. By detecting the change in memristive synaptic weight, the quantity of input signals applied onto the device can be "counted". This makes it possible to achieve the functions of abacus that is basically a counting frame. We demonstrate through experimental studies that this kind of memristive abacus can calculate decimal fractions in the light of the abacus algorithms. This approach opens up a new route to do decimal arithmetic in memristive devices without encoding binary-coded decimal.

The structural and optical characterizations of titania incorporated with alumina nanocrystals have been presented in this paper and the films exhibit excellent properties like low current density, small hysteresis as well as high photoluminescence quantum yields of about 361 nm. These properties are promising for the applications in future electronic devices.