Search

Ferro hydrophobic particles possess essential properties for controlling the behavior of suspended substances in water. By adjusting the concentration of these particles, the magnetic force within the fluid carrier can be modified, leading to the emergence of distinct flow structures and patterns on the water's surface. This study examines the cloaking phenomenon exhibited by different ferroparticle conditions, employing both experimental and numerical approaches. Under the magnetic influence, hydrophilic particles can attain cloaking velocities of up to 35 mm/s, while hydrophobic particles remain unaffected by the magnetic force, remaining suspended on the water's surface. Hydrophobization of ferroparticles not only decreases their water-cloaking ability but also alters their magnetic properties. The inherent hydrophobic nature of these particles enhances water surface stability, rendering them valuable in various applications, including biomedical and self-cleaning technologies. This research holds particular significance for manipulating suspended particles in water, particularly in biomedical applications like drug delivery and tissue engineering, as well as for advancing self-cleaning technologies., (© 2024. The Author(s).)

Dynamically manipulating droplet motion on hydrophobic surfaces is crucial in various fields, including biomedical, sensing, actuation, and oil-water separation applications. Ferrofluid droplets can be manipulated and controlled using external magnetic forces. The creation of ferrofluids involves multiple procedures that can affect the functionality and stability of droplet manipulation, limiting their use in sustainable applications. This study investigates the dynamics of droplet motion over functionalized and non-functionalized ferroparticles, considering different droplet volumes, ferroparticle layer widths, and wt% concentrations. The translational and sliding velocities of the droplets are measured using high-speed camera recording with a tracker application. The finding revealed the transformation of a droplet sliding motion into a rolling motion with propulsion under the magnetic influence. The sliding velocity increases for the droplets moving over the ordinary ferroparticles on the hydrophobic surface. However, the droplet motion is dominated by rolling in the case of hydrophobic ferro particles. The droplet sliding velocity rises sharply at high concentrations (or layer width) of ferroparticle as the magnetic bond number rises sharply to 3. A newborn droplet adheres to the magnet surface during droplet rolling and sliding motion., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

An innovative method is introduced for environmental dust mitigation from a hydrophobic surface by a sessile water droplet. The sessile water droplet is located between two parallel plates having hydrophilic (at the top) and hydrophobic (at the bottom) states. The water droplet is located at the top hydrophilic plate, and the effect of the plate spacing on dust mitigation rate is examined. The droplet behavior is analyzed for different plate spacings and various droplet sizes using a high-speed camera. The fluid and the particle motions are simulated inside the droplet while adopting the experimental conditions. The findings demonstrate that the sessile droplet can effectively mitigate dust. Reducing the plate spacing increases the droplet meniscus diameter and enhances the dust removal rate. The surface tension force on the hydrophilic surface remains greater than that of the pinning force on the dusty hydrophobic surface even though the Magdeburg and surface tension forces contribute to the droplet pinning force on the hydrophobic dusty surface. Flow current is developed in the droplet fluid during the squeezing period, which considerably enhances the dust removal rate from the hydrophobic surface. The cleaned area increases with the droplet volume and plate spacing. Stria patterns are observed on the circumference of the dust-removed area. The present study provides a detailed analysis of a new method of dust removal from surfaces for self-cleaning applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The sonic excitation of the liquid droplet on a hydrophobic mesh surface gives rise to a different oscillation behavior than that of the flat hydrophobic surface having the same contact angle. To assess the droplet oscillatory behavior over the hydrophobic mesh, the droplet motion is examined under the external sonic excitations for various mesh screen aperture ratios. An experiment is carried out and the droplet motion is recorded by a high-speed facility. The findings revealed that increasing sonic excitation frequencies enhance the droplet maximum displacement in vertical and horizontal planes; however, the vertical displacements remain larger than those of the horizontal displacements. The resonance frequency measured agrees well with the predictions and the excitation frequency at 105 Hz results in a droplet oscillation mode (n) of 4. The maximum displacement of the droplet surface remains larger for the flat hydrophobic surface than that of the mesh surface with the same contact angle. In addition, the damping factor is considerably influenced by the sonic excitation frequencies; hence, increasing sonic frequency enhances the damping factor, which becomes more apparent for the large mesh screen aperture ratios. The small-amplitude surface tension waves create ripples on the droplet surface., (© 2022. The Author(s).)

The ferro-liquid droplet manipulation on hydrophobic surfaces remains vital for various applications in biomedicine, sensors and actuators, and oil-water separation. The magnetic influence of ferro-liquid droplets on the hydrophobic surface is elucidated. The mechanisms of a newborn droplet formation under the magnetic force are explored. The sliding and rolling dynamics of the ferro-liquid droplets are assessed for the various concentrations wt % of ferro-particles. High-speed recording and a tracker program are used to evaluate the droplet sliding and translational velocities. It is demonstrated that the mode of droplet motion changes from sliding to rolling as the magnetic Bond number increases, in which case, the droplet position becomes close to the magnet surface. The translational velocity of the droplet under rolling mode increases as the ferro-particle concentration in the droplet fluid increases. A further increase of the magnetic Bond number results in the creation of a newborn droplet attached to the magnet surface.

Water droplet impact on nanowires/nanowalls' textured hydrophobic silicon surfaces was examined by assessing the influence of texture on the droplet impact dynamics. Silicon wafer surfaces were treated, resulting in closely packed nanowire/nanowall textures with an average spacing and height of 130 nm and 10.45 μm, respectively. The top surfaces of the nanowires/nanowalls were hydrophobized through the deposition of functionalized silica nanoparticles, resulting in a droplet contact angle of 158° ± 2° with a hysteresis of 4° ± 1°. A high-speed camera was utilized to monitor the impacting droplets on hydrophobized nanowires/nanowalls' textured surfaces. The nanowires/nanowalls texturing of the surface enhances the pinning of the droplet on the impacted surface and lowers the droplet spreading. The maximum spreading diameter of the impacting droplet on the hydrophobized nanowires/nanowalls surfaces becomes smaller than that of the hydrophobized as-received silicon, hydrophobized graphite, micro-grooved, and nano-springs surfaces. Penetration of the impacted droplet fluid into the nanowall-cell structures increases trapped air pressure in the cells, acting as an air cushion at the interface of the droplet fluid and nanowalls' top surface. This lowers the droplet pinning and reduces the work of droplet volume deformation while enhancing the droplet rebound height.

The characteristics of droplet impact on hydrophobic surfaces can be altered by introducing surface oscillations. The contact duration, spreading, retraction, and rebounding behaviors of the impacting water droplet are examined at various sonic excitation frequencies of the hydrophobic membrane. Membrane oscillation and droplet behavior are analyzed by utilizing a high-speed camera. The restitution coefficient and membrane dynamics are formulated and the findings are compared with those of the experiments. It is found that the mode of membrane oscillation changes as the sonic excitation frequency is changed. The droplet spreading and retraction rates reduce while the rebound height and restitution coefficient increase at a sonic excitation frequency of 75 Hz. However, further increase of the excitation frequency results in reduced rebound height because of the increased energy dissipation on the impacted surface. The droplet contact (transition time) duration reduces as the excitation frequency increases. Increasing droplet Weber number enhances the droplet contact period on the membrane, which becomes more apparent at low frequencies of sonic excitation.

Water droplet rolling motion over the hydrophobized and optically transparent micro-post array surfaces is examined towards dust removal pertinent to self-cleaning applications. Micro-post arrays are replicated over the optically transparent polydimethylsiloxane (PDMS) surfaces. The influence of micro-post array spacing on droplet rolling dynamics is explored for clean and dusty surfaces. The droplet motions over clean and dusty micro-post array surfaces are monitored and quantified. Flow inside the rolling droplet is simulated adopting the experimental conditions. Findings reveal that micro-post gap spacing significantly influences droplet velocity on clean and dusty hydrophobized surfaces. Air trapped within the micro-post gaps acts like a cushion reducing the three-phase contact line and interfacial contact area of the rolling droplet. This gives rise to increased droplet velocity over the micro-post array surface. Droplet kinetic energy dissipation remains large for plain and micro-post arrays with small gap spacings. A Rolling droplet can pick up dust particles from micro-post array gaps; however, few dust residues are observed for large gap spacings. Nevertheless, dust residues are small in quantity over hydrophobized micro-post array surfaces., (© 2021. The Author(s).)

Rolling liquid droplets are of great interest for various applications including self-cleaning of surfaces. Interfacial resistance, in terms of pinning and shear rate, has a critical role in droplet rolling dynamics on hydrophobic surfaces. Lowering the interfacial resistance requires reducing the droplet wetting length and droplet fluid contact area on hydrophobic surfaces. The present study examines droplet rolling behavior on inclined hydrophobized metallic meshes, which facilitate reduced wetting length and contact area of droplets. Experiments are carried out using a high-speed recording facility to evaluate droplet translational and rolling velocities over various sizes of hydrophobized meshes. The flow field inside the droplet fluid is simulated in 3-dimensional space mimicking the conditions of experiments. The findings reveal that droplet translational velocity attains significantly higher values for hydrophobized meshes than plain hydrophobized metallic surfaces. Increasing the mesh size enhances the droplet velocity and reduces the droplet kinetic energy dissipation created by interfacial surface tension and shear forces. Increasing the droplet volume enhances the droplet velocity despite the fact that pinning and frictional forces increase at the liquid-mesh interface. Hence, for rolling droplets on the mesh surface, the increase in the gravitational force component becomes larger than the increase in interfacial pinning and frictional forces.

A water droplet rolling and spinning in an inclined hydrophobic wedge with different wetting states of wedge plates is examined pertinent to self-cleaning applications. The droplet motion in the hydrophobic wedge is simulated in 3D space incorporating the experimental data. A high-speed recording system is used to store the motion of droplets in 3D space and a tracker program is utilized to quantify the recorded data in terms of droplet translational, rotational, spinning, and slipping velocities. The predictions of flow velocity in the droplet fluid are compared with those of experimental results. The findings revealed that velocity predictions agree with those of the experimental results. Tangential momentum generated, via droplet adhesion along the three-phase contact line on the hydrophobic plate surfaces, creates the spinning motion on the rolling droplet in the wedge. The flow field generated in the droplet fluid is considerably influenced by the shear rate created at the interface between the droplet fluid and hydrophobic plate surfaces. Besides, droplet wobbling under the influence of gravity contributes to the flow inside the rolling and spinning droplet. The parallel-sided droplet path is resulted for droplet emerging from the wedge over the dusty surface., (© 2021. The Author(s).)

Unidirectional and stabilize droplet rolling over hydrophobic surfaces is critical for self-cleaning applications of large areas. Introducing minute size channels on hydrophobic surfaces in the droplet rolling direction can minimize droplet wobbling and enables unidirectional rolling. The droplet rolling behavior over an inclined hydrophobic surface having a minute size channel is investigated. The flow field developed inside the droplet fluid is numerically simulated in a three-dimensional domain pertinent to experimental conditions. Experiments are carried out using a high-speed facility to monitor and evaluate droplet motion over channeled and flat hydrophobic surfaces. The findings revealed that predictions of the droplet translational velocity and those obtained from the experiments are in good agreement. The presence of a minute channel on the hydrophobic surface gives rise to droplet fluid inflection into the minute channel, which in turn modifies the center of mass of the droplet during rolling. This lowers the droplet wobbling height and enables the droplet to roll unidirectionally along the channel length. Enlarging the channel width on the hydrophobic surface increases droplet kinetic energy dissipation while reducing the droplet rolling speed. The complex flow structures formed in the droplet fluid modifies the pressure along the droplet centerline; however, the droplet fluid pressure remains almost the same order as the Laplace pressure in the upper region of a rolling droplet over the channeled hydrophobic surface.

Polycarbonate sheets are optically transparent and have the potential to be used as one of the cover materials for PV applications. Solution treatment of polycarbonate surfaces enables to create surface texture topology giving rise to a hydrophobic state, which is favorable for self-cleaning applications. In the present study, hydrophobization of polycarbonate surface is investigated via crystallization of surface by a one-step process. The influence of texture topology, which is created via crystallization, on water droplet mobility and optical transmittance is examined. Findings revealed that solution treatment, using acetone, results in crystallized polycarbonate surfaces with a hydrophobic state. Depending on the treatment duration, the texture characteristics of crystallized surface change while influencing the water contact angle hysteresis. This in turn affects the droplet mobility over the inclined crystallized surface and alters the UV visible transmittance. Moreover, the droplet mobility improves and dust mitigation rates from the treated surface increase as the solution treatment duration are reduced to 2 min. Oil impregnated samples result in improved UV visible transmittance; however, droplet motion changes from rolling to sliding over the surface. A sliding water droplet enables the removal of the dust particles from the oil-impregnated sample surface.

Environmental effects such as dust mitigation can amplify the spread of viruses via inhaling infected dust particles. Infusion and the spreading rate of human saliva over the dust particles can play a critical role in contiguous virus spread. In the present study, mechanical and chemical interactions of human saliva with environmental dust particles are considered. The saliva droplet impact on dust particles is examined while mimicking saliva droplet spreading during coughing in a dusty ambience. The mechanisms of saliva infusion and cloaking on the dust particles are explored. The characteristics of saliva droplet normal and oblique impacts on a dust particle are examined experimentally and numerically to evaluate the amount of saliva residues on the impacted particle surface. The findings reveal that the saliva liquid infuses and cloaks the dust particle surfaces. The saliva droplet impact on the dust particles leaves a considerable amount of saliva residues on the impacted surfaces, which remain undried for a prolonged period in indoor environments. Weak adhesion of the saliva-infected dust particles on surfaces, such as glass surfaces, enables saliva-infected dust particles to rejoin neighboring ambient air while possessing a high potential for virus spreading.

Self-cleaning of surfaces becomes challenging for energy harvesting devices because of the requirements of high optical transmittance of device surfaces. Surface texturing towards hydrophobizing can improve the self-cleaning ability of surfaces, yet lowers the optical transmittance. Introducing optical matching fluid, such as silicon oil, over the hydrophobized surface improves the optical transmittance. However, self-cleaning ability, such as dust mitigation, of the oil-impregnated hydrophobic surfaces needs to be investigated. Hence, solution crystallization of the polycarbonate surface towards creating hydrophobic texture is considered and silicon oil impregnation of the crystallized surface is explored for improved optical transmittance and self-cleaning ability. The condition for silicon oil spreading over the solution treated surface is assessed and silicon oil and water infusions on the dust particles are evaluated. The movement of the water droplet over the silicon oil-impregnated sample is examined utilizing the high-speed facility and the tracker program. The effect of oil film thickness and the tilting angle of the surface on the sliding droplet velocity is estimated for two droplet volumes. The mechanism for the dust particle mitigation from the oil film surface by the sliding water droplet is analyzed. The findings reveal that silicon oil impregnation of the crystallized sample surface improves the optical transmittance significantly. The sliding velocity of the water droplet over the thick film (~700 µm) remains higher than that of the small thickness oil film (~50 µm), which is attributed to the large interfacial resistance created between the moving droplet and the oil on the crystallized surface. The environmental dust particles can be mitigated from the oil film surface by the sliding water droplet. The droplet fluid infusion over the dust particle enables to reorient the particle inside the droplet fluid. As the dust particle settles at the trailing edge of the droplet, the sliding velocity decays on the oil-impregnated sample.

Cost effective dust mitigation from surfaces is one of the challenges in various sectors. The reduction of dust adhesion on surfaces plays a vital role for dust mitigation from surfaces under the gravitational influence. Creating an avalanche effect on dusty surfaces improves the dust mitigation rate and provides an effective cleaning process. Hence, solution treatment of dust by low concentration hydrofluoric acid is considered towards reducing dust adhesion on glass surfaces. To increase the rate of dust mitigation, the avalanche influence is created by the higher density and larger size particles (5300 kg/m 3 and ~ 50 µm) than the average size dust particles (2800 kg/m 3 and 1.2 µm) via locating them in the top region of the dusty glass surfaces. Mitigation velocity of the dust particles is evaluated using a high-speed recording system and the tracker program. Findings revealed that solution treatment (curing) of the dust particles results in the formation of fluorine compounds, such as CaF 2 and MgF 2 , on dust surfaces, which suppress dust adhesion on surfaces. OSHA Globally Harmonized System lists the fluorine compounds formed as environmentally non-harmful. Avalanche's influence results in dust mitigation at a smaller tilt angle of the glass surface (~ 52°) than that of the case with none-avalanche influence (63°). Area cleaned on the glass surface, via dust mitigation, is larger as the avalanche is introduced, which becomes more apparent for the solution treated dust particles. Dust mitigation under avalanche influence improves optical transmittance of the dusty glass samples by a factor of 98%.

Dust repelling from transparent polyvinyl chloride film surface via sonic excitation is examined and dynamics of repelled (inflight) dust particles are analyzed. An experimental rig is designed and built to assess the vibrational characteristics of the polyvinyl chloride film at different frequencies of sonic excitation. A high speed recording system and tracking program are utilized monitoring and evaluating the dynamics of the inflight particles. The dynamics of inflight particles are also simulated numerically and the predictions are compared with those of the experimental data. In order to examine the influence of dust particle adhesion on the dynamics of the inflight particles, the polyvinyl chloride film surface is hydrophobized through dip coating by functionalized nano-silica particles. Improvement of the optical transmittance of the dust mitigated film is determined via outdoor tests. The findings demonstrate that sonic excitation repels the particles from the film surface and it is more pronounced at 64 Hz excitation frequency while demonstrating that sonic excitation can be used for dust removal from transparent surfaces. The mitigation via sonic excitation improves the optical transmittance of the dusty surface by 77%, which becomes more apparent for hydrophobic surfaces.

Mitigation of environmental dust from surfaces becomes one of the challenges for maintaining the optical characteristics of surfaces. Dust repelling from hydrophobic and hydrophilic surfaces under vibrational excitation is investigated and the percentage of dust repelled from surfaces is evaluated. The characteristics of the dust particles are examined and dust adhesion on surfaces under molecular forces (van der Walls) is explored. High speed recording system is utilized to monitor dust repelling from the surfaces. The dust residues, which are not repelled from the sample surfaces, are analyzed and the percentage of area coverage of the dust repelled from the surfaces is assessed. The repelling height of the dust is predicted analytically, and the findings are compared with the experimental data. Findings revealed that the analytical predictions of dust repelling height are in good agreement with the experimental data. Due to none-stoichiometric elemental compositions in the dust compounds, ionic forces are created while forming the cluster-like structures because of particle adhesion. The vibrational excitation repels dust from sample surfaces in the form of cluster-like structures. Dust repelled from hydrophobic surface results in a larger clean area on the hydrophobic surface (80% of total surface area) than that of the hydrophilic surface (20% of total surface area).

Wettability of a droplet liquid on a dusty hydrophobic plate is considered and the fluid infusion into the dust layer is studied pertinent to dust removal from the hydrophobic surfaces via rolling/sliding droplets. Influence of droplet hydrostatic pressure on the fluid infusion into dust layer is also investigated towards exploring the dust removal mechanisms. Environmental dust characteristics are evaluated and their interface with the droplet fluid is assessed. Sets of experiments are carried out to examine: (i) droplet fluid infusion into the dust layer, (ii) droplet fluid cloaking of dust, and (iii) evaluate the weight gain of the dust particles during cloaking. The findings reveal that droplet fluid (water) spreads onto the dusty surface and infuses on the dust particles. Cloaking velocity decays sharply with time and the weight gain of the dust particles is about 17% of the original dust weight after cloaking. The dust particles have a large area of nano-size open-pores-sites on the surface; however, capillary diffusion through these sites is limited with shallow depths and the weight gain of a dust particle via capillary diffusion is about 1% of the particle weight. The maximum infusion depth of the droplet fluid in the dust layer is about 74 μm, which is slightly less than the dust layer thickness on the surface. The rolling droplet picks up all the dust from the 150 μm thick dust layer on the surface., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Dust mitigation from surfaces remains essential, particularly for the efficient operation of energy harnessing devices. Although various dust removal methods have been introduced, the self-cleaning method is favorable because of the cost-effective cleaning process. Dust mitigation from surfaces by water droplets, mimicking nature, is fruitful because it involves low-cost operations. The dust removal rate from surfaces by rolling water droplets can be increased by creating bubbles inside the rolling droplets through which dust pinning on surfaces can be lowered and the droplet liquid infusion on dust surfaces can be enhanced. This study provides insight into bubble formation and dust mitigation in carbonated and distilled water droplets located on hydrophobic surfaces by examining bubble formation and dust distribution inside the water droplets. The behavior of bubbles inside the carbonated water droplet and emanating from the hydrophobic surface was recorded and analyzed by incorporating high-speed camera data. The influence of environmental dust particles on bubble formation was also assessed. Bubble velocity was formulated analytically and the findings are compared with those of the experimental values. Findings revealed that the bubble formation inside the carbonated droplet fluid had a significant effect on the transition of dust particles from the hydrophobic surface towards the droplet fluid. The volume concentration of dust particles in the carbonated water droplet was almost 1.5 to 2.5 times larger than that of the distilled water droplet. The dissolution of alkaline and alkaline earth metal compounds in the carbonated droplet fluid acted like nucleation centers for bubble formation; hence, the number of bubbles formed on the dusty hydrophobic surface was greater than that of the clean hydrophobic surface. Some bubbles attached at the dust particle surface contributed to dust mobility in the droplet fluid, which occurred particularly in the droplet bottom region. This enhanced the velocity of the dust particles transiting from the dusty hydrophobic surface to the droplet fluid interior by almost 1.5 times in the early period.

Environmental dust is modified towards self-cleaning applications under the gravitational influence. Dust particles are collected in the local area of Dammam in Saudi Arabia and they are treated with a dilute hydrofluoric acid solution. The changes in chemical and adhesion characteristics of the dust particles prior and after the solution treatment are analyzed. Force of adhesion and work required to remove dust from hydrophobic and hydrophilic glass surfaces are assessed, separately, for solution treated and collected dust. We show that aqueous hydrofluoric acid solution treatment modifies some dust components while causing the formation of submicron cracks and nano/submicron porous/pillars like textures on the dust particles. The texture generated on dust surfaces after the solution treatment has a great influence on dust adhesion characteristics. Hence, the solution treated dust particles result in lower adhesion on hydrophobic and hydrophilic glass surfaces as compared to that of untreated dust. The gravitational force enables to remove solution treated dust from inclined glass surfaces, which becomes more apparent for hydrophobic surfaces.

The motion of a water droplet in a hydrophobic wedge fixture was examined to assess droplet rolling and spinning for improved dust mitigation from surfaces. A wedge fixture composed of two inclined hydrophobic plates had different wetting states on surfaces. Droplet rolling and spinning velocities were analyzed and findings were compared with the experiments. A wedge fixture was designed and realized using a 3D printing facility and a high speed recording system was adopted to evaluate droplet motion in the wedge fixture. Polycarbonate sheets were used as plates in the fixture, and solution crystallization and functionalized silica particles coating were adopted separately on plate surfaces, which provided different wetting states on each plate surface while generating different droplet pinning forces on each hydrophobic plate surface. This arrangement also gave rise to the spinning of rolling droplets in the wedge fixture. Experiments were extended to include dust mitigation from inclined hydrophobic surfaces while incorporating spinning- and rolling droplet and rolling droplet-only cases. The findings revealed the wedge fixture arrangement resulted in spinning and rolling droplets and spinning velocity became almost 25% of the droplet rolling velocity, which agrees well with both predictions and experiments. Rolling and spinning droplet gave rise to parallel edges droplet paths on dusty hydrophobic surfaces while striations in droplet paths were observed for rolling droplet-only cases. Spinning and rolling droplets mitigated a relatively larger area of dust on inclined hydrophobic surfaces as compared to their counterparts corresponding to rolling droplet-only cases.

Here, environmental dust cleaning from an inclined hydrophobic surface by rolling liquid droplets has been studied and the influence of fluid droplets on the dust removal rate has been examined. The distilled and carbonated water droplets at different volumes were incorporated and the inclination angle of the dusty hydrophobic surface on the droplet motion was explored in the experiments. We demonstrated that the carbonated water droplet had higher translational velocity than the distilled water droplet on the dusty hydrophobic surface. The bubbles formed around the droplet surface acted as gas cushions at the interface between the solid surface and the fluid droplet while lowering the friction and pinning forces and enhancing the droplet translational velocity on the surface. Collected environmental dust has various components, some of which can dissolve in water while creating resorption/nucleation centers for bubble formation in the carbonated water droplet. The interaction between the bubbles and the dust particles at the liquid-solid interface enhanced the rate of dust particle movement into carbonated water. For a small-volume droplet (20 μL) at a low surface inclination angle ( δ = 1°), the rolling motion of the distilled and carbonated water droplets ceased on the hydrophobic surface at early periods., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Hydrophobizing of stretchable elastomer surfaces is considered and the reversible behavior of the resulting surface wetting state is examined after stretching and relaxing the hydrophobized samples. The environmental dust are analyzed in terms of elemental constitutes and size, and the dust pinning on the hydrophobized surface is measured. The dust removal mechanisms, by the water droplets on the hydrophobized surface, are investigated. We demonstrated that deposition of functionalized nano-size silica units on the elastomer surface gives rise to hydrophobicity with 135° ± 3° contact angle and low hysteresis of 3° ± 1°. Stretching hydrophobized elastomer surface by 50% (length) reduces the contact angle to 122° ± 3° and enhances the hysteresis to 6° ± 1°. However, relaxing the stretched sample causes exchanging surface wetting state reversibly. Water droplet rolling and sliding can clean the dusty hydrophobized surface almost 95% (mass ratio of the dust particles removed). Droplet puddling causes striations like structures along the droplet path and close examination of the few residues of the dust reveals that the droplet takes away considerably large amount of dust from surface.

A water droplet behavior on a hydrophobic surface is examined relevant to the dust particles removal from the surface. Surface crystallization of polycarbonate is realized in acetone bath and the resulting surface is coated by the functionalized nano-size silica particles towards reducing contact angle hysteresis. This arrangement provides droplet rolling/sliding on the hydrophobic surface. Droplet translational velocity is formulated and predictions are compared with those resulted from the high speed recorded data. Influence of surface inclination angle on droplet dynamics is investigated and the dust removal mechanism on the inclined surface is analyzed. It is found that predictions of droplet translational velocity agree well with those obtained from the experiment. Droplet rolling dominates over sliding on the inclined surface and droplet sliding velocity remains almost 10% of the droplet translational velocity. The main mechanism for the dust particles removal is associated with the droplet fluid cloaking of the dust particles during its transition on the hydrophobic surface. Droplet acceleration, due to increased surface inclination angle, has effect on the rate of dust particles removal from the surface, which is more apparent for large droplet volumes. Increasing droplet acceleration improves the coverage area of the clean surface.

A water droplet's behavior on an inclined hydrophobic surface in the presence of environmental dust particles is considered and the droplet's dynamics are analyzed pertinent to self-cleaning applications. A polycarbonate wafer is crystallized using the solution-crystallization method to generate hierarchically distributed micro/nano-sized spherules and pillars on the surface. To improve the wetting state and lower the contact angle hysteresis, functionalized silica particles are synthesized and, later, deposited on the crystallized surface. Environmental dust particles are collected and characterized in terms of elemental composition, size and shape. A high-speed camera is used to monitor a water droplet's behavior on the inclined hydrophobic surface with and without the presence of dust particles. The influence of droplet volume on the dust particle removal rate from the inclined hydrophobic surface is assessed. It is found that the functionalized silica particles deposited on the surface result in a droplet contact angle in the order of 158 ± 2° and contact angle hysteresis of 2 ± 1°. The water droplet mainly rolls on the inclined hydrophobic surface and the sliding velocity remains almost 13% of the transverse velocity of the droplet. Droplet wobbling is influenced by the dust particles and the droplet size; in which case, increasing the droplet volume enhances the droplet puddle thickness on the hydrophobic surface. The cloaking of the droplet fluid onto the dust particles causes mixing of the dust particles with the droplet fluid while enhancing the particle removal from the hydrophobic surface. Increasing the droplet volume slightly enhances the size of the area of the cleaned surface., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A water droplet behavior on the liquid n-octadecane film is investigated. The coating of hydrophobic surface by N-octadecane film provides exchange of wetting state on the surface. The polycarbonate surface is crystallized and the functionalized silica particles are placed on the resulting surface prior to thin film coating of n-octadecane. A high-speed camera is used to monitor dynamic characteristics of the droplet on the inclined film. The findings reveal that deposition of thin n-octadecane film on hydrophobic surface results in reversibly exchange of the wetting state at the surface, which remains hydrophobic when n-octadecane film is in solid phase while it becomes hydrophilic when n-octadecane film liquefies. Droplet transition velocity predicted agrees well with the experimental data. Sliding mode of the water droplet governs droplet transition on the liquid surface. Droplet pinning force, due to interfacial tension, dominates over the other retention forces including drag and shear.

The removal of environmental dust particles from optically transparent glass surfaces is considered, and the dynamics of the dust particles on the inclined hydrophobic glass surface is examined. The glass surfaces are coated by functionalized nano-sized silica particles to create a hydrophobic wetting state on the surface. A thin layer of environmental dust particles, collected from the local area of Dammam in the Kingdom of Saudi Arabia (KSA), is deposited on the surface while mimicking the dust accumulation on the surfaces in the dusty days of KSA. In order to increase the removal rate of the dust particles from the inclined hydrophobic glass surfaces, high density particles, which are higher than the density of the dust particles, are locally distributed on the dust particle-deposited surface while generating the avalanche influence on the inclined surface. The motion of the dust and high density particles on the inclined surface is monitored using a high speed camera. The predictions of the dust particles' acceleration and velocity are compared to those obtained from the high speed camera data. It is found that the predictions of velocity and acceleration of the dust particles agree well with the experimental data. Local insertion of the high density particles generates avalanche influence on the inclined surface while initiating the removal of the dust particles from the hydrophobic surface at small inclination angles. The size of the area where the dust particles are removed from the inclined surface increases with enlarging coverage area of the high density particles. The dust-removed surface, under the avalanche influence, improves the UV-visible transmittance of the hydrophobic glass., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A water droplet pinning on inclined hydrophobic surface is considered and the droplet heat transfer characteristics are examined. Solution crystallization of polycarbonate is carried out to create hydrophobic characteristics on the surface. The pinning state of the water droplet on the extreme inclined hydrophobic surface (0° ≤ δ ≤ 180°, δ being the inclination angle) is assessed. Heat transfer from inclined hydrophobic surface to droplet is simulated for various droplet volumes and inclination angles in line with the experimental conditions. The findings revealed that the hydrophobic surface give rise to large amount of air being trapped within texture, which generates Magdeburg like forces between the droplet meniscus and the textured surface while contributing to droplet pinning at extreme inclination angles. Two counter rotating cells are developed for inclination angle in the range of 0° < δ < 20° and 135° < δ < 180°; however, a single circulation cell is formed inside the droplet for inclination angle of 25° ≤ δ ≤ 135°. The Nusselt number remains high for the range of inclination angle of 45° ≤ δ ≤ 135°. Convection and conduction heat transfer enhances when a single and large circulation cell is formed inside the droplet.

The dynamic motion of a water droplet on an inclined hydrophobic surface is analyzed with and without environmental dust particles on the surface. Solution crystallization of a polycarbonate surface is carried out to generate a hydrophobic surface with hierarchical texture composed of micro/nanosize spheroids and fibrils. Functionalized nanosize silica particles are deposited on the textured surface to reduce contact angle hysteresis. Environmental dust particles are collected and characterized using analytical tools prior to the experiments. The droplet motion on the hydrophobic surface is assessed using high-speed camera data, and then, the motion characteristics are compared with the corresponding analytical results. The influence of dust particles on the water droplet motion and the amount of dust particles picked up from the hydrophobic surface by the moving droplet is evaluated experimentally. A 40 μL droplet was observed to roll on the hydrophobic surface with and without dust particles, and the droplet slip velocity was lower than the rotational velocity. The rolling droplet removes almost all dust particles from the surface, and the mechanism for the removal of dust particles from the surface was determined to be water cloaking of the dust particles.

Reversible exchange of the wetting state of a hydrophobic surface is examined. Solution crystallization of a polycarbonate surface is carried out to form hierarchically distributed micro/nano size spherules and fibrils on the surface. Although the solution crystallized surface has hydrophobic characteristics, the contact angle hysteresis remains high. Functionalized silica particles are deposited on the crystallized polycarbonate surface to improve the droplet contact angle and lower contact angle hysteresis. The liquid film of n -octadecane with 1.5 μm thickness is formed on the functionalized silica particles deposited crystallized surface, which results in hydrophilic surface characteristics. The n -octadecane film solidifies upon reducing the temperature on the surface and solid flakes of n -octadecane are formed. This arrangement changes the surface wetting state to hydrophobic. Liquefaction and solidifying of the n -octadecane film at the functionalized silica deposited surface gives rise to reversible exchange of surface wetting state. This behavior is attributed to exposure of emerging functionalized silica particles to the free surface in the region of the solid n -octadecane flakes. The water droplet is cloaked by the liquid n -octadecane while forming a ridge around the droplet. In this case, the water droplet becomes mobile at the surface because flow develops in the n -octadecane liquid film at the onset of liquefaction., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Environmental dusts settle on surfaces and influence the performance of concentrated solar energy harvesting devices, such as aluminum troughs. The characteristics of environmental dust and the effects of mud formed from the dust particles as a result of water condensing in humid air conditions on an aluminum wafer surface are examined. The dissolution of alkaline and alkaline earth compounds in water condensate form a chemically active mud liquid with pH 8.2. Due to gravity, the mud liquid settles at the interface of the mud and the aluminum surface while forming locally scattered patches of liquid films. Once the mud liquid dries, adhesion work to remove the dry mud increases significantly. The mud liquid gives rise to the formation of pinholes and local pit sites on the aluminum surface. Morphological changes due to pit sites and residues of the dry mud on the aluminum surface lower the surface reflection after the removal of the dry mud from the surface. The characteristics of the aluminum surface can address the dust/mud-related limitations of reflective surfaces and may have implications for the reductions in the efficiencies of solar concentrated power systems.

In this study, nanowires/nanowalls were generated on a silicon wafer through a chemical etching method. Octadecyltrichlorosilane (OTS) was deposited onto the nanowire/nanowall surfaces to alter their hydrophobicity. The hydrophobic characteristics of the surfaces were further modified via a 1.5-μm-thick layer of n-octadecane coating on the OTS-deposited surface. The hydrophobic characteristics of the resulting surfaces were assessed using the sessile water droplet method. Scratch and ultraviolet (UV)-visible reflectivity tests were conducted to measure the friction coefficient and reflectivity of the surfaces. The nanowires formed were normal to the surface and uniformly extended 10.5 μm to the wafer surface. The OTS coating enhanced the hydrophobic state of the surface, and the water contact angle increased from 27° to 165°. The n-octadecane coating formed on the OTS-deposited nanowires/nanowalls altered the hydrophobic state of the surface. This study provides the first demonstration that the surface wetting characteristics change from hydrophobic to hydrophilic after melting of the n-octadecane coating. In addition, this change is reversible; i.e., the hydrophilic surface becomes hydrophobic after the n-octadecane coating solidifies at the surface, and the process again occurs in the opposite direction after the n-octadecane coating melts.

Owing to recent climate changes, dust storms are increasingly common, particularly in the Middle East region. Dust accumulation and subsequent mud formation on solid surfaces in humid environments typically have adverse effects on surface properties such as optical transmittance, surface texture, and microhardness. This is usually because the mud, which contains alkaline and ionic species, adheres strongly to the surface, often through chemical bonds, and is therefore difficult to remove. In this study, environmental dust and the after-effects of mud formed on a polycarbonate sheet, which is commonly used as a protective glass in photovoltaic cells. Ionic compounds (OH(-)) are shown to significantly affect the optical, mechanical, and textural characteristics of the polycarbonate surface, and to increase the adhesion work required to remove the dry mud from the polycarbonate surface upon drying. Such ability to modify characteristics of the polycarbonate surface could address the dust/mud-related limitations of superhydrophobic surfaces.

Recent developments in climate change have increased the frequency of dust storms in the Middle East. Dust storms significantly influence the performances of solar energy harvesting systems, particularly (photovoltaic) PV systems. The characteristics of the dust and the mud formed from this dust are examined using various analytical tools, including optical, scanning electron, and atomic force microscopies, X-ray diffraction, energy spectroscopy, and Fourier transform infrared spectroscopy. The adhesion, cohesion and frictional forces present during the removal of dry mud from the glass surface are determined using a microtribometer. Alkali and alkaline earth metal compounds in the dust dissolve in water to form a chemically active solution at the glass surface. This solution modifies the texture of the glass surface, thereby increasing the microhardness and decreasing the transmittance of the incident optical radiation. The force required to remove the dry mud from the glass surface is high due to the cohesive forces that result from the dried mud solution at the interface between the mud and the glass. The ability altering the characteristics of the glass surface could address the dust/mud-related limitations of protective surfaces and has implications for efficiency enhancements in solar energy systems.