Search

Poly(β-L-malic acid) (PMLA) is a water-soluble, biodegradable, and biocompatible polymer with broad prospective applications and can be hydrolyzed to produce widely used acidulant L-malic acid. In order to meet an increasing demand of PMLA, we employed two effective cell-recycling strategies to produce PMLA from raw cassava hydrolysate by Aureobasidium pullulans ZD-3d. In fed-batch fermentation with raw cassava hydrolysate, 101.9 g/L PMLA was obtained with the productivity and yield of 0.77 g/L/h and 0.40 g/g, respectively. Further, three times of membrane filtration-based cell recycling fermentation was carried out, with a high productivity and yield of 1.04-1.64 g/L/h and 0.5-0.84 g/g achieved, respectively. While harnessing centrifugation-based cell recycling fermentation for five times, the productivity and yield approached 0.98-1.76 g/L/h and 0.78-0.86 g/g, respectively. To our knowledge, the processes showed the highest average PMLA productivity compared with others using low-cost biomass, which offered efficient and economical alternatives for PMLA production. KEY POINTS: • PMLA production from raw cassava hydrolysate by Aureobasidium pullulans was studied • High PMLA productivity and yield were obtained via two cell recycling strategies • The highest average PMLA productivity from low-cost biomass to date was achieved., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The available pneumococcal conjugate vaccines provide protection against only those serotypes that are included in the vaccine, which leads to a selective pressure and serotype replacement in the population. An alternative low-cost, safe and serotype-independent vaccine was developed based on a nonencapsulated pneumococcus strain. This study evaluates process intensification to improve biomass production and shows for the first time the use of perfusion-batch with cell recycling for bacterial vaccine production. Batch, fed-batch, and perfusion-batch were performed at 10 L scale using a complex animal component-free culture medium. Cells were harvested at the highest optical density, concentrated and washed using microfiltration or centrifugation to compare cell separation methods. Higher biomass was achieved using perfusion-batch, which removes lactate while retaining cells. The biomass produced in perfusion-batch would represent at least a fourfold greater number of doses per cultivation than in the previously described batch process. Each strategy yielded similar vaccines in terms of quality as evaluated by western blot and animal immunization assays, indicating that so far, perfusion-batch is the best strategy for the intensification of pneumococcal whole-cell vaccine production, as it can be integrated to the cell separation process keeping the same vaccine quality., (© 2020 Wiley Periodicals, Inc.)

The presence of toxic degradation products in lignocellulosic hydrolysate typically reduced fermentation rates and xylose consumption rate, resulting in a decreased ethanol productivity. In the present study, Zymomonas mobilis 8b was investigated for high cell density fermentation with cell recycling to improve the ethanol productivity in lignocellulosic hydrolysate. The fermentation performances of Z. mobilis 8b at various conditions were first studied in yeast extract-tryptone medium. It was found that nutrient level was essential for glucose and xylose co-fermentation by Z. mobilis 8b and high cell density fermentation with cell recycling worked well in yeast extract-tryptone medium for 6 rounds fermentation. Z. mobilis 8b was then studied in enzymatic hydrolysates derived from dilute acid (DA) pretreated corn stover (CS) and ammonia pretreated CS for high cell density fermentation with cell recycling. Ethanol productivity obtained was around three times higher compared to traditional fermentation. Ethanol titer and metabolic yield were also enhanced with high cell density fermentation. Z. mobilis 8b cells showed high recyclability in ammonia pretreated CS hydrolysate., (Copyright © 2019 Li, Zhai, Jiang, Chen, Yuan, Liu and Jin.)

Although first-generation fuel ethanol is produced in Brazil from sugarcane-based raw materials with high efficiency, there is still little knowledge about the microbiology, the biochemistry and the molecular mechanisms prevalent in the non-aseptic fermentation environment. Learning-by-doing has hitherto been the strategy to improve the process so far, with further improvements requiring breakthrough technologies. Performing experiments at an industrial scale are often expensive, complicated to set up and difficult to reproduce. Thus, developing an appropriate scaled down system for this process has become a necessity. In this paper, we present the design and demonstration of a simple and effective laboratory-scale system mimicking the industrial process used for first generation (1G) fuel ethanol production in the Brazilian sugarcane mills. We benchmarked this system via the superior phenotype of the Saccharomyces cerevisiae PE-2 strain, compared to other strains from the same species: S288c, baker's yeast, and CEN.PK113-7D. We trust that such a system can be easily implemented in different laboratories worldwide, and will allow a better understanding of the S. cerevisiae strains that can persist and dominate in this industrial, non-aseptic and peculiar environment.

Effects of degradation products (low molecular weight compounds produced during pretreatment) on the microbes used in the RaBIT (Rapid Bioconversion with Integrated recycling Technology) process that reduces enzyme usage up to 40% by efficient enzyme recycling were studied. Chemical genomic profiling was performed, showing no yeast response differences in hydrolysates produced during RaBIT enzymatic hydrolysis. Concentrations of degradation products in solution were quantified after different enzymatic hydrolysis cycles and fermentation cycles. Intracellular degradation product concentrations were also measured following fermentation. Degradation product concentrations in hydrolysate did not change between RaBIT enzymatic hydrolysis cycles; the cell population retained its ability to oxidize/reduce (detoxify) aldehydes over five RaBIT fermentation cycles; and degradation products accumulated within or on the cells as RaBIT fermentation cycles increased. Synthetic hydrolysate was used to confirm that pretreatment degradation products are the sole cause of decreased xylose consumption during RaBIT fermentations., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Background: The Rapid Bioconversion with Integrated recycle Technology (RaBIT) process reduces capital costs, processing times, and biocatalyst cost for biochemical conversion of cellulosic biomass to biofuels by reducing total bioprocessing time (enzymatic hydrolysis plus fermentation) to 48 h, increasing biofuel productivity (g/L/h) twofold, and recycling biocatalysts (enzymes and microbes) to the next cycle. To achieve these results, RaBIT utilizes 24-h high cell density fermentations along with cell recycling to solve the slow/incomplete xylose fermentation issue, which is critical for lignocellulosic biofuel fermentations. Previous studies utilizing similar fermentation conditions showed a decrease in xylose consumption when recycling cells into the next fermentation cycle. Eliminating this decrease is critical for RaBIT process effectiveness for high cycle counts., Results: Nine different engineered microbial strains (including Saccharomyces cerevisiae strains, Scheffersomyces (Pichia) stipitis strains, Zymomonas mobilis 8b, and Escherichia coli KO11) were tested under RaBIT platform fermentations to determine their suitability for this platform. Fermentation conditions were then optimized for S. cerevisiae GLBRCY128. Three different nutrient sources (corn steep liquor, yeast extract, and wheat germ) were evaluated to improve xylose consumption by recycled cells. Capacitance readings were used to accurately measure viable cell mass profiles over five cycles., Conclusion: The results showed that not all strains are capable of effectively performing the RaBIT process. Acceptable performance is largely correlated to the specific xylose consumption rate. Corn steep liquor was found to reduce the deleterious impacts of cell recycle and improve specific xylose consumption rates. The viable cell mass profiles indicated that reduction in specific xylose consumption rate, not a drop in viable cell mass, was the main cause for decreasing xylose consumption.

Fermentative production of optically pure lactic acid has roused interest among researchers in recent years due to its high potential for applications in a wide range of fields. More specifically, the sharp increase in manufacturing of biodegradable polylactic acid (PLA) materials, green alternatives to petroleum-derived plastics, has significantly increased the global interest in lactic acid production. However, higher production costs have hindered the large-scale application of PLA because of the high price of lactic acid. Therefore, reduction of lactic acid production cost through utilization of inexpensive substrates and improvement of lactic acid production and productivity has become an important goal. Various methods have been employed for enhanced lactic acid production, including several bioprocess techniques facilitated by wild-type and/or engineered microbes. In this review, we will discuss lactic acid producers with relation to their fermentation characteristics and metabolism. Inexpensive fermentative substrates, such as dairy products, food and agro-industrial wastes, glycerol, and algal biomass alternatives to costly pure sugars and food crops are introduced. The operational modes and fermentation methods that have been recently reported to improve lactic acid production in terms of concentrations, yields, and productivities are summarized and compared. High cell density fermentation through immobilization and cell-recycling techniques are also addressed. Finally, advances in recovery processes and concluding remarks on the future outlook of lactic acid production are presented., (Copyright © 2013 Elsevier Inc. All rights reserved.)