Search

Host condition is key in understanding disease dynamics. In an urban population of Rattus norvegicus, we aimed to assess whether infection of Leptospira interrogans and helminths was associated with patterns of host hematological and hormone-biochemical stress-related conditions. Rat kidney imprints and urine were used to identify and quantify L. interrogans, and feces samples for helminth eggs and corticosterone metabolites. Blood samples were taken for complete blood counts and specific biochemicals in rats' sera. Principal Component Analyses were performed to check whether rats would be grouped according to health profiles. We obtained hematological and hormone-biochemical data from 95 and 61 rats, respectively. Hematological PCA revealed distinct rat groups: typical (T), eosinophil deficient (Eos-D), eosinophil- and monocyte- deficient (EM-D) and monocyte deficient with high immature neutrophils (Mon-D). No association between L. interrogans or helminths and rat health profiles was observed, except with Trichiuridae, which mean intensity was significantly higher when all deficient groups were pooled together compared to the T-group. The poorest condition group was found in areas with fewer rat burrows than the T-group, indicating EM-D had a reduced ability to occupy "good" quality habitats. In natural populations, hematological profiles may reflect host's overall condition, instead of responses to specific infections., Competing Interests: Author Disclosure Statement No competing financial interests exist.

This study evaluated the biological behavior of the coffee compounds Trigonelline (T), chlorogenic acid (C), and nicotinic acid (N), correlating with their release from a resin matrix. Minimum inhibitory concentration (MIC) was evaluated against Streptococcus mutans UA159, and cytotoxicity was assessed by methyl tetrazolium salt on OD-21 cells. Resin matrices (bisphenol A-glycidyl-dimethacrylate/triethylene glycol-dimethacrylate 70/30 wt%, camphorquinone/ethyl 4-dimethyl aminobenzoate 0.5/1 wt%) were doped with coffee compounds in different concentrations (10/20/30/40/50 wt%), performing 15 groups (T10-T50, C10-C50, N10-N50), and a control group with no coffee compound. Degree of conversion (DC%) was analyzed by Fourier transform infrared spectroscopy. Antimicrobial properties were evaluated by bioluminescence (Luciferase assay). The release from loaded matrices was analyzed over time (24 hr, 6, 14, 21 and 28 days), using high-performance liquid chromatography (HPLC). Data were submitted to ANOVA/Tukey's test (α = 0.05). MIC for T and C was 6 mg/ml, and 4 mg/ml for N. None of them were cytotoxic. Only T50 and C50 showed lower DC% than control (α < 0.05). Some groups (T30/T40/T50/C40/C50/N50) were strongly antimicrobial, reducing bacterial activity approximately five times compared to control (α < 0.05). For T30, T40, T50, C40, and C50, the HPLC showed a release above or closer to MIC values mainly in 24 hr, but for N50, up to 28 days. In conclusion, the coffee compounds presented antimicrobial activity, depending on their concentration when added in resin matrices, being found a correlation with their release., (© 2020 Wiley Periodicals LLC.)

The aim of this in vitro study was to present a method using confocal laser scanning microscopy for three-dimensional analysis of human dental enamel subjected to ceramic bracket debonding. The labial enamel surfaces of three upper central incisors were prepared and mounted in the form of standardized specimens. A sample repositioning protocol was established to enable surface measurement and analysis before and after bracket debonding. Observations were made of representative areas measuring 1,280 × 1,280 μm2, in the center of the enamel samples, as well as of the total topography (2,500 × 3,500 μm) of the bonding areas provided by the equipment software. Noncontact three-dimensional high-resolution image analyses revealed the capabilities of the employed technique and methodology to permit the examination of specific characteristics and alterations on the surfaces, before and after the debonding and finishing procedures. The new protocol was effective to provide qualitative and quantitative assessments of changes on the same dental surfaces at different trial times. The methodology constitutes a feasible tool for revealing the effects of debonding of ceramic brackets on sound and previously injured dental enamel surfaces.

Urban slums provide suitable conditions for infestation by rats, which harbour and shed a wide diversity of zoonotic pathogens including helminths. We aimed to identify risk factors associated with the probability and intensity of infection of helminths of the digestive tract in an urban slum population of Rattus norvegicus. Among 299 rats, eleven species/groups of helminths were identified, of which Strongyloides sp., Nippostrongylus brasiliensis and, the human pathogen, Angiostrongylus cantonensis were the most frequent (97, 41 and 39%, respectively). Sex interactions highlighted behavioural differences between males and females, as eg males were more likely to be infected with N. brasiliensis where rat signs were present, and males presented more intense infections of Strongyloides sp. Moreover, rats in poor body condition had higher intensities of N. brasiliensis. We describe a high global richness of parasites in R. norvegicus, including five species known to cause disease in humans. Among these, A. cantonensis was found in high prevalence and it was ubiquitous in the study area - knowledge which is of public health importance. A variety of environmental, demographic and body condition variables were associated with helminth species infection of rats, suggesting a comparable variety of risk factors for humans.

Surface treatment of fiber-reinforced posts can increase adhesion, especially on the post/resin cement interface. The purpose of this in vitro study was to evaluate the effect of different surface treatments on fiber post cemented with a self-adhesive system. Sixty fiberglass epoxy resin posts were cleaned, dried and divided into 6 groups (n=10): Control (no surface treatment), silane (silane coupling agent was applied homogeneously on surface), 24% hydrogen peroxide (H 2 O 2 ) (immersion during 1min), blasting (blasting with aluminum oxide for 30s), NH 3 plasma (plasma treatment for 3min) and HMDSO plasma (plasma treatment for 15min). After the treatments, posts were inserted into a silicon matrix that was filled with the resin cement RelyX U200. Afterwards, the post/cement specimens were cut perpendicularly to the long axis of the posts into six 1.0mm thick discs and submitted to a push-out bond strength (POBS) test. Failure pattern was classified in 5 types: type I: cohesive in post; type II: cohesive in cement; type III: cohesive post and cement; type IV: adhesive post/cement; and type V: mixed (association between cohesive and adhesive). Data were analyzed by one-way ANOVA and Tukey HSD post hoc test (α=0.05). Silane (15.94±6.5), blasting (13.13±3.6), NH 3 plasma (14.44±4.0) and HMDSO plasma (13.23±5.3) showed higher POBS when compared to control (p<0.05) and similar among them. H 2 O 2 (9.40±4.0) treatment showed POBS values statistically similar to control (9.65±3.6). Failures were predominantly cohesive post and cement, type III, in all groups. In conclusion, surface treatments influenced in the adhesion of fiberglass post with the self-adhesive cement RelyX U200. Silane, blasting with aluminum oxide and plasmas (NH 3 and HMDSO) showed results superior to 24% hydrogen peroxide., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Statement of the Problem: The behavior of the luting cement and the cementation protocol are essential in the clinical success of ceramic restorations., Purpose: The purpose of this study was to evaluate the bond stability of 2 resin cements and a yttria-stabilized tetragonal polycrystalline zirconia (Y-TZP) ceramic submitted to 2 surface treatments., Material and Methods: Sixty plates of a Y-TZP ceramic were assigned to 3 groups according to the surface treatments: control, as sintered surface; methacryloxydecyl dihydrogen phosphate (MDP), coated with an MDP-based primer, and tribochemical silica-coating (TSC), coated with tribochemical silica. The plates of each group were further divided into 2 subgroups according to the resin cement as follows: RelyX adhesive resin cement (conventional) and RelyX Unicem (self-adhesive). Cylinders of resin cements (∅=0.75 mm × 0.5 mm in height) were built up on the ceramic surfaces, and the plates stored in distilled water at 37°C for either 24 hours or 6 months before being submitted to a microshear bond strength test. The data were submitted to 3-way ANOVA and the Tukey honestly significant difference test (α=.05)., Results: Three-way ANOVA showed statistical significance for the 3 independent factors: resin cement, surface treatment, and period of water immersion (P<.001). Unicem presented the highest microshear bond strength after 24 hours (MDP, 37.4 ±2.3 and TSC, 36.2 ±2.1 MPa). Except for RelyX adhesive resin cement applied on ceramic surfaces treated with TSC, the microshear bond strength of all the other groups decreased after 6 months of aging in water. The microshear bond strength decreased most in the control groups (-81.5% for ARC and -93.1% for Unicem). In the group treated with TSC, the microshear bond strength for Unicem decreased by 54.8% and in that treated with MDP-based primer by -42.5%. In the group treated with MDP-based primer, the microshear bond strength for RelyX ARC decreased by -52.8%., Conclusions: Irrespective of surface treatments, self-adhesive resin cement was not able to maintain the bond to Y-TZP ceramic after 6 months of aging in water., (Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

The aim of the study was to compare maximal and submaximal cardiorespiratory responses between progressive tests on a treadmill on land (TRE), and stationary running on land (SRL) and in water (SRW), while also comparing two methods of determining the second turn point (ST) (ventilatory curve and heart rate deflection point). The study sample consisted of nine active women (23 ± 1.94 years) that performed three maximal protocols in separate days. Heart rate (HR) and oxygen uptake (VO2) were measured in all sessions. The data were analyzed using repeated-measures ANOVA and two-way repeated measures ANOVA with post-hoc Bonferroni test. Greater values of maximal HR (HRmax) and HR at ST (HRST) were observed during exercise performed on TRE and during the SRL, compared to the SRW (p < 0.05). The results for maximal VO2 (VO2max) and VO2 at ST (VO2ST) showed greater and significant values on TRE compared to STL and STW (p < 0.05). Furthermore, the HR and VO2 corresponding to the ST showed similar values between the two methods. Thus, the main conclusion of the present study was that the HR deflection point seems to be a simple and practical alternative method for determining the ST in all protocols analyzed. Key PointsThe maximal and submaximal (second turn point) oxygen uptake were influenced by the type of exercise, as these responses were similar in both water-based and land-based stationary running protocols and different from those obtained during the treadmill running, that presented greater values compared with both stationary running protocols.The heart rate deflection point can be used for determining the second turn point during stationary running test in aquatic environment.Caution is necessary in the interpretation of the application of the heart rate deflection point in water aerobics exercises because we analyzed only young women performing one water-based exercise.

The rehabilitation of a pond after approximately 20 years of strong acidified conditions due to industrial and domestic waste deposition in its catchment basin is reviewed. We describe in this study the acidification process that occurred in a tropical pond in Northeast Brazil (Dunas Lake), the rehabilitation plan for the pond and the subsequent monitoring conducted over two decades. After the contamination assessment by the late 80s, a rehabilitation plan was carried out in the early 90s, in which the contaminated soil and water have been removed and reduced, respectively. No further attempt to neutralize the water or any remediation has been carried out. A toxicity monitoring plan based on toxicity assays with the fish Poecilia reticulata was employed to verify the natural rehabilitation of the pond. The data on toxicity, pH, conductivity, sulphate and dissolved iron recorded from 1994 to 2010 were also compiled and discussed. The collected data in 2003 and 2004 indicated changes in water quality and from them complementary management actions, namely improvement in the containment plant, were conducted in 2005. Results for toxicity assays and pH results indicated interannual changes in the water quality similar to rainy-dry periods. Moving average approach using pH data clearly showed the recovery process of Dunas Lake as well as the importance of the containment plan to reduce the contamination. Finally, a summary of the recent situation after two decades of rehabilitation is provided., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Strength training (ST; high intensity/low volume/long rest) has been used in several populations, including children, young adults, and older adults. However, there is no information about circuit weight training (CWT; low intensity/high volume/short rest) in apparently healthy postmenopausal women. The purpose of the present study was to analyze the effects of high-intensity ST and circuit training on isometric strength (IS), upper limb dynamic strength (ULS) and lower limb dynamic strength (LLS), muscle activation of quadriceps (EMG quad), maximal oxygen uptake (VO2 max), time to exhaustion (TE), and bone mineral density (BMD). Twenty-eight postmenopausal women were divided into 3 groups: 1) ST group (STG, n = 9, 45-80% 1 repetition maximum (1RM), 2-4 sets, 20-6 reps), 2) circuit training group (CTG, n = 10, 45-60% 1RM, 2-3 sets, 20-10 reps), and 3) a control group (CON, n = 9, no exercise). Significance level was defined as p

Toxic potential of the pH reduction to fingerlings of Poecilia reticulata, through acute toxicity bioassays, as well as the influence of increased pH on the toxicity were assessed. Acid lake samples (Dunas Lake) were collected during 19 months, and assessed with following treatments: water at local pH (+/-3.0) and samples with modified pH to 3.5, 3.8, 4.0, 4.3, 4.6, 5.0, 5.5, 6.0, and 6.5. Culture water samples with pH reduced to 3.0 were also assessed. Newborn P. reticulata were exposed during 96h, and dead/immobile organisms were counted at various time intervals during exposure (short intervals in the beginning and long towards the end). Mean results of LT50 and confidence intervals from the Dunas Lake and control water with reduced pH were 1.36 (+/-0.48)h, and 1.03 (+/-0.50)h, respectively, with no statistical difference. Samples with increased pH showed a significant reduction in toxicity, with no toxicity detected at pH 6.0 and higher. Relationship between pH and lethal toxicity for fingerlings of P. reticulata demonstrated that pH exerted a strong effect on the survival of this species at the Dunas Lake, explaining about 80% of the toxicity observed.

Tropical regions' economy is usually based on agriculture, which involves an intensive use, and even frequent overuse, of pesticides. Nevertheless, not much research has been done on the impact of pesticides on tropical aquatic ecosystems, which are often contaminated by runoff-related pesticide inputs due to unpredictable and torrential rainfalls. This study aimed to: (i) adapt and evaluate a short-term sublethal in situ assay using post-exposure feeding as an endpoint, to the tropical cladoceran species Diaphanosoma brachyurum (collected at the Pedra do Cavalo dam in the Paraguaçu River basin, Bahia, Brazil), and, (ii) assess the role of the standard species Daphnia magna as an adequate laboratory surrogate. Lethal and sublethal (post-exposure feeding) responses were assessed for the two species. To evaluate these responses under environmentally realistic exposure conditions, a runoff event was simulated in an agricultural area previously contaminated with different deltamethrin concentrations. The resultant runoff water was used to set up microcosms with different dilutions, simulating the entrance of runoff water in an adjacent lentic system. An in situ assay with D. brachyurum was performed inside the microcosms, allowing to discriminate the effects due to deltamethrin from those due to other potential stressors associated with the experimental design (e.g. organism handling, load of suspended particles, microcosm design). Water samples were collected from microcosms to conduct a laboratory assay with D. magna. The in situ methodologies revealed to be suitable to conduct assays with D. brachyurum under tropical conditions, since all exposed organisms were successfully retrieved from the chambers. Furthermore, none of the potential stressors associated with the experimental design influenced the daphnids' performance. The tropical cladoceran species, exposed under more realistic conditions, revealed to be more sensitive than the laboratory standard species: lethal effects were only observed for D. brachyurum and sublethal effects were noticed at a lower deltamethrin concentration for this species than for D. magna.

The suitability and viability of acute in situ bioassays were investigated in the biomonitoring program of an acidic lake contaminated with sulphur residues. Responses of organisms observed in laboratory and in situ bioassays were also assessed to determine whether or not they were similar and comparable, regarding accuracy and precision. Newborn Poecilia reticulata were employed as test organisms and exposed to the same water samples under in situ and laboratory conditions. Mortality/immobility was the endpoint assessed and dead/immobile organisms were counted at various time intervals during exposure. The mean calculated LT50 values and 95% confidence intervals were 1.61 (1.36-1.87) h in the laboratory bioassays and 0.72 (0.55-0.89) h in the in situ bioassays. Statistical comparison of these values revealed a significant difference (p<0.05). In situ bioassays were more accurate than those carried out in the laboratory, demonstrating higher sensitivity and better reproduction of what occurs in nature, while laboratory bioassays were more precise.

The treatment efficiency, as toxicity removal, of complex effluents from the Industrial District of Camaçari (BA, Brazil), after biological treatment with activated sludge was evaluated using Microtox. Samples of the equalised effluent (EE) were collected prior to treatment together with samples of the treated effluent (TE), which remained 24 h in the treatment plant. Rehydrated colonies of Vibrio fischeri were exposed to sequential dilutions of EE and TE to assess luminosity interference. Values for EC50 were calculated, together with the respective toxicity units. In all, twenty assays of each effluent type were carried out and the mean toxicity removal was 92.71%, while the chemical oxygen demand (COD) presented mean reduction of 83.04%. There was a variability of an order of magnitude between the Microtox results for the two types of effluents. The mean EC50 values were 2.12 for EE and 47.78% for TE. In spite of its weakness in some conditions, the Microtox system demonstrated to work adequately in assessing effluent toxicity removal in this treatment plant and therefore can be used for further toxicity removal programs.