Search

Herbs have been used as natural remedies for disease treatment, prevention, and health care. Some herbs with functional properties are also used as food or food additives for culinary purposes. The quality and safety inspection of herbs are influenced by various factors, which need to be assessed in each operation across the whole process of herb production. Traditional analysis methods are time-consuming and laborious, without quick response, which limits industry development and digital detection. Considering the efficiency and accuracy, faster, cheaper, and more environment-friendly techniques are highly needed to complement or replace the conventional chemical analysis methods. Infrared (IR) and Raman spectroscopy techniques have been applied to the quality control and safety inspection of herbs during the last several decades. In this paper, we generalize the current application using IR and Raman spectroscopy techniques across the whole process, from raw materials to patent herbal products. The challenges and remarks were proposed in the end, which serve as references for improving herb detection based on IR and Raman spectroscopy techniques. Meanwhile, make a path to driving intelligence and automation of herb products factories., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Chen, Liu, Zhang, Wang, Yang, Zhao, Peng, Kong and Huang.)

Natural waters contain some carbonaceous materials referred to as dissolved organic matter, which is mainly composed of humic acids (HA). Owing to its polydispersed character related to the presence of diverse molecular size fractions (< 450 kDa to even < 1 kDa), HA displays curious reactivity in natural waters and during water treatment train. In this study, a system-based stepwise approach was tracked by characterizing HA following photolysis, adsorptive interactions, and solar photocatalysis using bare TiO 2 , sol-gel prepared TiO 2 , and their respective Cu-doped specimens complementary to kinetic evaluation on this respect. For this purpose, prior to and following each treatment, HA was monitored by dissolved organic carbon content, UV-vis parameters, and fluorescence features. Attenuated total reflection Fourier transform infrared (FTIR), surface-enhanced Raman scattering spectroscopy (SERS), XRD, SEM, EDAX XPS, and DRS were used to characterize the materials and solutions reported in this study. Most significant quantitative variations were attained in UV-vis spectroscopic parameters along with fluorescence characteristics; however, infrared and Raman profiles displayed slight deviations in qualitative measures. Differentiation between the selected photocatalyst specimens could be visualized through molecular size effects pointing out the significance of HA 10 kDa fraction. For the first time, this study reports the degradation of specific fractions of HA as a function of their molecular size fraction. Cu-TiO 2 seems to photocatalyze more effectively the degradation of the diverse HA fractions due to their more extended absorption of solar light by this photocatalyst., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Water oxidation is an essential reaction of an artificial photosystem for solar fuel generation because it provides electrons needed to reduce carbon dioxide or protons to a fuel. Earth-abundant metal oxides are among the most attractive catalytic materials for this reaction because of their robustness and scalability, but their efficiency poses a challenge. Knowledge of catalytic surface intermediates gained by vibrational spectroscopy under reaction conditions plays a key role in uncovering kinetic bottlenecks and provides a basis for catalyst design improvements. Recent dynamic infrared and Raman studies reveal the molecular identity of transient surface intermediates of water oxidation on metal oxides. Combined with ultrafast infrared observations of how charges are delivered to active sites of the metal oxide catalyst and drive the multielectron reaction, spectroscopic advances are poised to play a key role in accelerating progress toward improved catalysts for artificial photosynthesis.

Many chemometric tools are invaluable and have proven effective in data mining and substantial dimensionality reduction of highly multivariate data. This becomes vital for interpreting various physicochemical data due to rapid development of advanced analytical techniques, delivering much information in a single measurement run. This concerns especially spectra, which are frequently used as the subject of comparative analysis in e.g. forensic sciences. In the presented study the microtraces collected from the scenarios of hit-and-run accidents were analysed. Plastic containers and automotive plastics (e.g. bumpers, headlamp lenses) were subjected to Fourier transform infrared spectrometry and car paints were analysed using Raman spectroscopy. In the forensic context analytical results must be interpreted and reported according to the standards of the interpretation schemes acknowledged in forensic sciences using the likelihood ratio approach. However, for proper construction of LR models for highly multivariate data, such as spectra, chemometric tools must be employed for substantial data compression. Conversion from classical feature representation to distance representation was proposed for revealing hidden data peculiarities and linear discriminant analysis was further applied for minimising the within-sample variability while maximising the between-sample variability. Both techniques enabled substantial reduction of data dimensionality. Univariate and multivariate likelihood ratio models were proposed for such data. It was shown that the combination of chemometric tools and the likelihood ratio approach is capable of solving the comparison problem of highly multivariate and correlated data after proper extraction of the most relevant features and variance information hidden in the data structure., (Copyright © 2016 Elsevier B.V. All rights reserved.)

New approaches for identifying disease resistant trees are needed as the incidence of diseases caused by non-native and invasive pathogens increases. These approaches must be rapid, reliable, cost-effective, and should have the potential to be adapted for high-throughput screening or phenotyping. Within the context of trees and tree diseases, we summarize vibrational spectroscopic and chemometric methods that have been used to distinguish between groups of trees which vary in disease susceptibility or other important characteristics based on chemical fingerprint data. We also provide specific examples from the literature of where these approaches have been used successfully. Finally, we discuss future application of these approaches for wide-scale screening and phenotyping efforts aimed at identifying disease resistant trees and managing forest diseases.

The mineral brianyoungite, a carbonate-sulphate of zinc, has been studied by scanning electron microscopy (SEM) with chemical analysis using energy dispersive spectroscopy (EDX) and Raman and infrared spectroscopy. Multiple carbonate stretching modes are observed and support the concept of non-equivalent carbonate units in the brianyoungite structure. Intense Raman band at 1056 cm(-1) with shoulder band at 1038 cm(-1) is assigned to the CO3(2-) ν1 symmetric stretching mode. Two intense Raman bands at 973 and 984 cm(-1) are assigned to the symmetric stretching modes of the SO4(2-) anion. The observation of two bands supports the concept of the non-equivalence of sulphate units in the brianyoungite structure. Raman bands at 704 and 736 cm(-1) are assigned to the CO3(2-) ν4 bending modes and Raman bands at 507, 528, 609 and 638 cm(-1) are assigned to the CO3(2-) ν2 bending modes. Multiple Raman and infrared bands in the OH stretching region are observed, proving the existence of water and hydroxyl units in different molecular environments in the structure of brianyoungite. Vibrational spectroscopy enhances our knowledge of the molecular structure of brianyoungite., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The mineral tilleyite-Y, a carbonate-silicate of calcium, has been studied by scanning electron microscopy with chemical analysis using energy dispersive spectroscopy (EDX) and Raman and infrared spectroscopy. Multiple carbonate stretching modes are observed and support the concept of non-equivalent carbonate units in the tilleyite structure. Multiple Raman and infrared bands in the OH stretching region are observed, proving the existence of water in different molecular environments in the structure of tilleyite. Vibrational spectroscopy offers new information on the mineral tilleyite., (Copyright © 2015 Elsevier B.V. All rights reserved.)

We have studied the carbonate mineral kamphaugite-(Y)(CaY(CO3)2(OH)·H2O), a mineral which contains yttrium and specific rare earth elements. Chemical analysis shows the presence of Ca, Y and C. Back scattering SEM appears to indicate a single pure phase. The vibrational spectroscopy of kamphaugite-(Y) was obtained using a combination of Raman and infrared spectroscopy. Two distinct Raman bands observed at 1078 and 1088cm(-1) provide evidence for the non-equivalence of the carbonate anion in the kamphaugite-(Y) structure. Such a concept is supported by the number of bands assigned to the carbonate antisymmetric stretching mode. Multiple bands in the ν4 region offers further support for the non-equivalence of carbonate anions in the structure. Vibrational spectroscopy enables aspects of the structure of the mineral kamphaugite-(Y) to be assessed., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The mineral tengerite-(Y) has been studied by vibrational spectroscopy. Multiple carbonate stretching modes are observed and support the concept of non-equivalent carbonate units in the tengerite-(Y) structure. Intense sharp bands at 464, 479 and 508 cm(-1) are assigned to YO stretching modes. Raman bands at 765 and 775 cm(-1) are assigned to the CO3(2-) ν4 bending modes and Raman bands at 589, 611, 674 and 689 cm(-1) are assigned to the CO3(2-) ν2 bending modes. Multiple Raman and infrared bands in the OH stretching region are observed, proving the existence of water in different molecular environments in the structure of tengerite-(Y)., (Copyright © 2014 Elsevier B.V. All rights reserved.)

We have studied the mineral poldervaartite CaCa[SiO3(OH)(OH)] which forms a series with its manganese analogue olmiite CaMn[SiO3(OH)](OH) using a range of techniques including scanning electron microscopy, thermogravimetric analysis, Raman and infrared spectroscopy. Chemical analysis shows the mineral is reasonably pure and contains only calcium and manganese with low amounts of Al and F. Thermogravimetric analysis proves the mineral decomposes at 485°C with a mass loss of 7.6% compared with the theoretical mass loss of 7.7%. A strong Raman band at 852 cm(-1) is assigned to the SiO stretching vibration of the SiO3(OH) units. Two Raman bands at 914 and 953 cm(-1) are attributed to the antisymmetric vibrations. Intense prominent peaks observed at 3487, 3502, 3509, 3521 and 3547 cm(-1) are assigned to the OH stretching vibration of the SiO3(OH) units. The observation of multiple OH bands supports the concept of the non-equivalence of the OH units. Vibrational spectroscopy enables a detailed assessment of the molecular structure of poldervaartite., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In this work we have studied the mineral dawsonite by using a combination of scanning electron microscopy with EDS and vibrational spectroscopy. Single crystals show an acicular habitus forming aggregates with a rosette shape. The chemical analysis shows a phase composed of C, Al, and Na. Two distinct Raman bands at 1091 and 1068 cm(-1) are assigned to the CO3(2-) ν1 symmetric stretching mode. Multiple bands are observed in both the Raman and infrared spectra in the antisymmetric stretching and bending regions showing that the symmetry of the carbonate anion is reduced and in all probability the carbonate anions are not equivalent in the dawsonite structure. Multiple OH deformation vibrations centred upon 950 cm(-1) in both the Raman and infrared spectra show that the OH units in the dawsonite structure are non-equivalent. Raman bands observed at 3250, 3283 and 3295 cm(-1) are assigned to OH stretching vibrations. The position of these bands indicates strong hydrogen bonding of the OH units in the dawsonite structure. The formation of the mineral dawsonite has the potential to offer a mechanism for the geosequestration of greenhouse gases., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A new organic-inorganic hybrid material, 1,4-bis(3-ammoniumpropyl) piperazinium pentachloridocuprate(II) chloride tetrahydrate [(C₁₀H₂₈N₄)CuCl₅Cl⋅4H₂O], has been synthesized and characterized by X-ray diffraction, UV-visible absorption, Infrared and Raman spectroscopy. The compound crystallizes in the orthorhombic system and Pnma space group with a=8.18 (3)Å, b=10.96 (5)Å, c=21.26 (9)Å, V=2254.3 (15)Å(3). In this structure, the Cu(2+) ion, surrounded by five chlorides, adopts the square pyramidal coordination geometry. The structure of this compound consists of tetraprotonated 1,4-bis(3-ammoniumpropyl) piperazinium cations and the anionic sublattice is built up of isolated, square pyramid [CuCl₅](3)(-) units, chloride ion Cl(-) and water molecules connected with each other by hydrogen bonds. Organic and inorganic entities are interconnected by means of hydrogen bonding contacts [NH⋯O(Cl), O(W)H⋯Cl and O(W)H⋯O]. Furthermore, the room temperature IR and Raman spectra of the title compound were recorded and analyzed on the basis of literature data. The optical study was also investigated by UV-Vis absorption. In fact, the organic-inorganic hybrid crystal thin film can be easily prepared by spin-coating method from the ethanol solution of the (C₁₀H₂₈N₄)CuCl₅Cl⋅4H₂O hybrid compound and it showed absorptions characteristics of CuCl based layered compounds centered at 275 and 374 nm., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In the present article, the molecular structure of S-methyl thiobutanoate, CH3CH2CH2C(O)SCH3 was determined by ab initio (MP2) and DFT calculations using different basis sets. The infrared and Raman spectra for the liquid phase were also recorded and the bands observed were assigned to the vibrational normal modes. The experimental and calculations confirm the presence of two most stable conformers, one with pseudo anti-syn conformation and another with gauche-syn conformation. The study was completed using natural bond orbital (NBO) and AIM analysis. The molecular properties like dipole moment, molecular electrostatic potential surface (MEP) and HOMO-LUMO molecular orbitals were calculated to get a better insight of the properties of the title molecule. Global and local reactivity descriptors were computed in order to predict reactivity and reactive sites on the molecule for nucleophilic, electrophilic and radical attacks., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Nine hybrid silicas bearing the organic substituent groups methyl, octyl, octadecyl, vinyl, phenyl, mercaptopropyl, isocyanatopropyl, chloropropyl and glycidoxypropyl were synthesized by an acid-catalyzed, hydrolytic sol-gel process. The resulting solid materials were characterized by their absorbance and attenuated total reflection (ATR) IR and Raman spectra. The latter technique proved to be particularly useful in the identification of the organic moieties in the hybrid silicas. The effect of the presence of the organic groups on the silica networks was also investigated - there were increases observed in both the SiOSi bond angles and bond lengths. Moreover, deconvolution of the IR-active antisymmetric SiOSi stretching bands permitted detection of the four- and six-membered siloxane rings present in the silicas. There proved to be a greater number of four-membered rings on the surfaces of the particles. Both IR and Raman spectroscopy proved to be invaluable in the characterization of these hybrid materials., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Nonlinear optical (NLO) organic compound, 4-bromobenzaldehyde-4'-N'-methylstilbazolium tosylate was synthesized by reflux method. The formation of molecular complex was confirmed from (1)H NMR, FT-IR and FT-Raman spectral analyses. The single crystals were grown by slow evaporation solution growth method and the crystal structure and atomic packing of grown crystal was identified. The morphology and growth axis of grown crystal were determined. The crystal perfection was analyzed using high resolution X-ray diffraction study on (001) plane. Thermal stability, decomposition stages and melting point of the grown crystal were analyzed. The optical absorption coefficient (α) and energy band gap (E(g)) of the crystal were determined using UV-visible absorption studies. Second harmonic generation efficiency of the grown crystal was examined by Kurtz powder method with different particle size using 1064 nm laser. Laser induced damage threshold study was carried out for the grown crystal using Nd:YAG laser., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A new psolaren derivate, (E)-9-(3,4-dimethylpent-2-enyloxy)-7H-furo[3,2-g]chromen-7-one, has been isolated and characterized by experimental and theoretical methodologies. The solid state molecular structure has been determined by X-ray diffraction methods. The substance crystallizes in the monoclinic P21/c space group with a=4.2389(5), b=26.090(3), c=12.482(1)Å, β=96.990(9)°, and Z=4 molecules per unit cell. The crystal structure shows the molecule fused phenyl and hetero-cycle rings to be coplanar with each other. Ab initio(MP2) and DFT methods have been used to predict the molecular structure in the isolated molecule approximation and the results compared with the experimental data. The MP2/6-311G(d,p) calculations are in good agreement with the X-ray results. The calculated HOMO-LUMO energy gap shows that the intra-molecular charge transfer could easily occur, a prediction closely related to the observed bioactivity of this new compound. In addition, the infrared absorption and Raman dispersion spectra were recorded and an assignment of the observed spectral features to molecular vibrations was made. The vibrational study was assisted by quantum chemistry calculations at the MP2 and DFT level, which provided theoretical mode frequencies. The study was completed by natural bond orbital (NBO) analysis., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The molecular structure and conformational properties of 2,2,2-trichloroethylacetate, CH(3)CO(2)CH(2)CCl(3), were determined by ab initio (MP2) and DFT quantum chemical calculations at different levels of theory. The theoretical study was complemented with experimental measurements such as IR and Raman spectroscopy. The experimental and calculations confirm the presence of two conformers, one with anti, gauche conformation (C1 symmetry) and another with anti, anti form (Cs symmetry). The conformational preference was studied using the total energy scheme, NBO and AIM analysis. The infrared spectra of CH(3)CO(2)CH(2)CCl(3) are reported in the liquid and solid phases and the Raman spectrum in liquid phase. Using calculated frequencies as a guide, evidence for both C1 and Cs conformers is obtained in the IR and Raman spectra., (Copyright © 2014. Published by Elsevier B.V.)

The molecular structure of 2,2,2-trichloroethoxysulfonamide, CCl3CH2OSO2NH2, has been determined in the solid state by X-ray diffraction data and in the gas phase by ab initio (MP2) and DFT calculations. The substance crystallizes in the monoclinic P21/c space group with a = 9.969(3)Å, b = 22.914(6)Å, c = 7.349(2)Å, β = 91.06(3)°, and Z = 8 molecules per unit cell. There are two independent, but closely related molecular conformers in the crystal asymmetric unit. They only differ in the angular orientation of the sulfonamide (SO2NH2) group. The conformers are arranged in the lattice as center-symmetric NH · · · O(sulf)-bonded dimers. Neighboring dimers are linked through further NH · · · O(sulf) bonds giving rise to a crystal layered structure. The solid state infrared and Raman spectra have been recorded and the observed bands assigned to the molecular vibration modes. Also, the thermal behavior of the substance was investigated by TG-DT analysis. The stability of the molecule arising from hyper-conjugative interactions and charge delocalization has been analyzed using natural bond (NBO) analysis., (Copyright © 2013 Elsevier B.V. All rights reserved.)