Search

Adapun tujuan penelitian ini adalah untuk mengetahui dan menganalisis implementasi regulasi penyetaraan jabatan administrasi ke dalam jabatan fungsional pada Pemerintah Daerah Provinsi NTB dan untuk mengetahui dan menganalisis pengaruh penyetaraan jabatan administrasi ke dalam jabatan fungsional terhadap kinerja Aparatur Sipil Negara di lingkungan Sekretariat Daerah Kantor Gubernur NTB. Jenis Penelitian yang digunakan adalah penelitian empiris, Pendekatan yang digunakan dalam penelitian ini antara lain: Pendekatan Perundang-undangan, Pendekatan konseptualdan Pendekatan Sosiologis. Adapun hasil dari penelitian ini bahwa Implementasi Regulasi Penyetaraan Jabatan Administrasi Ke Dalam Jabatan Fungsional Pada Pemerintah Daerah Provinsi NTB tidak efektif, hal ini dikarenakan oleh faktor komunikasi, sumber daya, disposisi dan struktur birokrasi yang masih dalam proses adaptif dan tidak optimal dalam mendukung kebijakan penyetaraan organisasi Pada Pemerintah Daerah Provinsi NTB.

In this paper, a new pulse width modulation (PWM) control method for the isolated current-mode resonant converter with a fixed switching frequency is presented. The circuit topology is the same as a conventional resonant converter with synchronous rectification and without any additional components. The control technique for the output voltage regulation is proposed with the unique PWM control for synchronously-rectifying switches. By using the transformer's leakage inductance and the PWM control, the boost conversion can be realized. Also, the zero-voltage switching (ZVS) operation can be done for primary switches, simultaneously. Some experiments have been done with 5MHz isolated DC-DC converter which has Gallium Nitride field effect transistor (GaN-FET)., 2013 15th European Conference on Power Electronics and Applications, EPE 2013; Lille; France; 2 September 2013 through 6 September 2013, identifier:Power Electronics and Applications (EPE), 2013 15th European Conference on, pp.1-10; 2013

In this article, we survey the author's recent results on an extension of the Brascamp-Lieb inequality; revealing its connection with a solution to the Skorokhod embedding problem, we extend the inequality.

Recently, high power-density, high power-efficiency, and wide regulation range isolated DC-DC converters have been required. This paper presents considerations of physical design and implementation for wide regulation range MHz-level LLC resonant DC-DC converters. The circuit parameters are designed with 3-5 MHz-level switching frequency. Also, the physical parameters and the size of the planar transformer are optimized by using derived equations and finite element method (FEM) with Maxwell 3D. Some experiments are done with prototype LLC resonant DC-DC converter using gallium nitride high electron mobility transistors (GaN-HEMTs); the input voltage is 42-53 V, the reference output voltage is 12 V, the load current is 8 A, the maximum switching frequency is about 5 MHz, the total volume of the circuit is 4.1 cm3, and the power density of the prototype converter is 24.4 W/cc., Active and Passive Electronic Components, 2016, 027406; 2016

High power efficiency and high power density are required in regulated isolated dc-dc converters. In this paper, a novel pulsewidth modulation (PWM) control method that is suitable for an isolated current-mode resonant dc-dc converter operated at a megahertz-level switching frequency is proposed. The output voltage with the proposed method can be regulated with no additional components at a fixed switching frequency. In addition, the zero-voltage switching (ZVS) of primary-side switches at turn on can be maintained. The principle of the proposed method and the method of the ZVS operation in the proposed method are explained. Some experiments have been performed with a 5-MHz isolated step-down dc-dc converter using gallium nitride high-electron-mobility transistors; the output voltage is 12 V, and the total volume of the circuit is 16.14 cm3. With the proposed PWM control method, the input voltage range is 42-45.5 V, and the maximum load current range is 10 A at Vi = 45.5 V. The ZVS of the primary-side switches at turn on is confirmed in all experimental regions, and the maximum power efficiency is 89.2%., IEEE Transactions on Industry Applications, 51(4), pp.3263-3272; 2015

Wataru Kobayashi,1 Shunji Yokokura,1 Takehiro Hariya,1 Toru Nakazawa1–3 1Department of Ophthalmology, 2Department of Retinal Disease Control, Ophthalmology, 3Department of Advanced Ophthalmic Medicine, Tohoku University Graduate School of Medicine, Sendai, Japan Background: The purpose of this study was to assess the effectiveness of 2% ethylenediaminetetraacetic acid (EDTA) for the treatment of band-shaped keratopathy.Methods: We studied 24 eyes of 16 patients with band-shaped keratopathy who underwent EDTA chelation treatment from April 1, 2011 to December 31, 2012. We compared preoperative and 1 month postoperative logarithm of the minimum angle of resolution (logMAR) best corrected visual acuity, intraocular pressure, and corneal curvature radius (K1, horizontal meridian; K2, vertical meridian; Km, average of K1 and K2). The Mann-Whitney U-test was used to determine the significance of differences.Results: There was a significant difference in preoperative and postoperative logMAR best corrected visual acuity (P=0.01). There were no significant differences in preoperative and postoperative intraocular pressure (P=0.24) or corneal curvature radius (K1, P=0.54; K2, P=0.49; Km, P=0.45).Conclusion: After 2% EDTA chelation treatment, post-operative logMAR best corrected visual acuity improved significantly. Moreover, since there was no significant difference in corneal curvature radius, there was little influence on corneal surface form. We believe that the results of our 2% EDTA chelation treatment were comparable with results obtained with 3.75% EDTA chelation treatment in previous reports. Two percent EDTA chelation is an effective treatment for band-shaped keratopathy and a useful method for any institution. Keywords: ethylenediaminetetraacetic acid, band-shaped keratopathy, phototherapeutic keratectomy, cornea

In this paper, a proposed pulse width modulation (PWM) control method for the isolated current-mode resonant DC-DC converter with MHz level switching frequency is presented. The circuit topology is same as a conventional resonant converter with synchronous rectification and without any additional components. The control technique for the output voltage regulation is proposed with the unique PWM control for synchronously-rectifying switches. By using the transformer's leakage inductance and the PWM control, the boost conversion can be realized. In addition, to achieve the zero-voltage switching (ZVS) operation, phase-shift between primary and secondary-side switches is adapted. The ZVS operation can maintain for primary-side switches. In this paper, proposed technique for achieving stable ZVS operation has been discussed. Some experiments have been done with 5MHz isolated DC-DC converter which has Gallium Nitride field effect transistor (GaN-FET), and the total volume of the circuit is 16.14cm3. The data show that the maximum power efficiency is 89.4%., 29th Annual IEEE Applied Power Electronics Conference and Exposition, APEC 2014; Fort Worth, TX; United States; 16 March 2014 through 20 March 2014, Applied Power Electronics Conference and Exposition (APEC), 2014 Twenty-Ninth Annual IEEE, 6803494; 2014

In this paper, the method of the realization of a MHz level switching frequency DC-DC converter for high power-density is presented. For high power-density, Gallium Nitride field effect transistor (GaN-FET) and current-mode resonant DC-DC converter are adopted. In addition, the proposed pulse width modulation (PWM) control method which is suitable for the isolated current-mode resonant DC-DC converter operated at MHz level switching frequency, and the novel primary-side zero voltage switching (ZVS) turn on method for the proposed PWM control are presented. Some experiments have been done with 5MHz isolated DC-DC converter which has GaN-FET, and the total volume of the circuit is 16.14cm3. With the proposed PWM control method, input voltage range is 36-44V, and maximum load current range is 8A at Vi = 44V. The primary-side ZVS turn on is confirmed, and the maximum power-efficiency is 89.4%., 7th International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014; Hiroshima; Japan; 18 May 2014 through 21 May 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE-ASIA), pp.3630-3637; 2014

Vanadium acmite (NaV3+Si2O6) was synthesized in presence of H2O at high pressure. The refractive indices of synthetic vanadium acmite are a=1.736 (3), γ=1.785 (5) and the cell parameters are a=9.640 (1) Å, b=8.748 (2) Å, c=5.297 (1) Å, β=106.89 (1)° and V=427.4 (1) Å3 . This pyroxene is stable at least up to 30 kb at 800℃ with H2O under reducing environment, and it melts incongruently to occur opaque crystal and liquid. Acmite75 -vanadium acmite25, acmite50-vanadium acmite50 and acmite25-vanadium acmite75 compositions also crystallizes easily at 500 bars and 600℃ with H2O. The cell parameters of synthetic acmite-vanadium acmite series change linearlly with molar compositions. This systematic changes in cell parameters suggest that a continuous solid solution series exists between NaFe3+Si2O6 and NaV3+Si2O6, Melting of pyroxene of composition acmite50 -vanadium acmite50 is relatively insensitive to PH2O in the studied pressure range of 5 - 30 kb.

Natural specimens of rhodonite, pyroxmangite, wollastonite and bustamite, metamorphosed to different grades, were analysed. Experiments were carried out to construct the phase diagrams of these manganese silicate minerals, in order to estimate the formation pressure and temperature conditions. Experimental results were compared to data from manganese mines., Natural specimens of rhodonite, pyroxmangite, wollastonite and bustamite, metamorphosed to different grades, were analysed. Experiments were carried out to construct the phase diagrams of these manganese silicate minerals, in order to estimate the formation pressure and temperature conditions. Experimental results were compared to data from manganese mines.

In the Proterozoic deposit, manganite ores are interstratified with red shale and silty limestone, whereas rhodochrosite ores are interbedded with organic-rich black shale. Lateral changes in ore mineralogy accompany those in the host rocks, in a classic example of facies variation in a zoned deposit. Ce depletion of manganite reflects a hydrothermal contribution to the sea water from which it precipitated, but the absence of volcanics suggests a remote source. It is likely that manganite precipitated directly from sea water above the redox interface while rhodochrosite may be early diagenetic and have formed in an anoxic environment. Late diagenesis has converted manganite to braunite. Both ore types have been metamorphosed at the contact with igneous intrusions to produce four distinct mineral assemblages. Finally, supergene processes have produced pyrolusite-vernadite assemblages in the weathering zone., In the Proterozoic deposit, manganite ores are interstratified with red shale and silty limestone, whereas rhodochrosite ores are interbedded with organic-rich black shale. Lateral changes in ore mineralogy accompany those in the host rocks, in a classic example of facies variation in a zoned deposit. Ce depletion of manganite reflects a hydrothermal contribution to the sea water from which it precipitated, but the absence of volcanics suggests a remote source. It is likely that manganite precipitated directly from sea water above the redox interface while rhodochrosite may be early diagenetic and have formed in an anoxic environment. Late diagenesis has converted manganite to braunite. Both ore types have been metamorphosed at the contact with igneous intrusions to produce four distinct mineral assemblages. Finally, supergene processes have produced pyrolusite-vernadite assemblages in the weathering zone.

The Lower Cretaceous manganese oxide deposits usually occur in the SW of the belt, whereas Mn-Fe deposits are restricted to bedded cherts and underlying pillow lavas in the NE. The oxide ores are characterised by low Fe/Mn ratios and have trace element concentrations and rare earth element patterns similar to those of present-day submarine hydrothermal deposits. The distribution patterns distinguish two types of deposits: hydrogenous deposits with relatively high concentrations; and submarine hydrothermal deposits with low concentrations. These compositional trends combine with geological evidence to suggest that the Fe phases precipitated first, closer to their source, while Mn was deposited later and at greater distance. Some hydrogenous effects are due to the adsorption of trace elements (Co, Ni, Cu, Zn) from sea water. The concentrations show that the deposits formed within 40 km of their source., The Lower Cretaceous manganese oxide deposits usually occur in the SW of the belt, whereas Mn-Fe deposits are restricted to bedded cherts and underlying pillow lavas in the NE. The oxide ores are characterised by low Fe/Mn ratios and have trace element concentrations and rare earth element patterns similar to those of present-day submarine hydrothermal deposits. The distribution patterns distinguish two types of deposits: hydrogenous deposits with relatively high concentrations; and submarine hydrothermal deposits with low concentrations. These compositional trends combine with geological evidence to suggest that the Fe phases precipitated first, closer to their source, while Mn was deposited later and at greater distance. Some hydrogenous effects are due to the adsorption of trace elements (Co, Ni, Cu, Zn) from sea water. The concentrations show that the deposits formed within 40 km of their source.