Search

Albitization is a common process during which hydrothermal fluids convert plagioclase and/or K-feldspar into nearly pure albite; however, its specific mechanism in granitoids is not well understood. The c. 1700 Ma A-type metaluminous ferroan granites in the Khetri complex of Rajasthan, NW India, have been albitized to a large extent by two metasomatic fronts, an initial transformation of oligoclase to nearly pure albite and a subsequent replacement of microcline by albite, with sharp contacts between the microcline-bearing and microcline-free zones. Albitization has bleached the original pinkish grey granite and turned it white. The mineralogical changes include transformation of oligoclase (∼An12) and microcline (∼Or95) to almost pure albite (∼An0·5-2), amphibole from potassian ferropargasite (XFe 0·84-0·86) to potassic hastingsite (XFe 0·88-0·97) and actinolite (XFe 0·32-0·67), and biotite from annite (XFe 0·71-0·74) to annite (XFe 0·90-0·91). Whole-rock isocon diagrams show that, during albitization, the granites experienced major hydration, slight gain in Si and major gain in Na, whereas K, Mg, Fe and Ca were lost along with Rb, Ba, Sr, Zn, light rare earth elements and U. Whole-rock Sm-Nd isotope data plot on an apparent isochron of 1419 ± 98 Ma and reveal significant disturbance and at least partial resetting of the intrusion age. Severe scatter in the whole-rock Rb-Sr isochron plot reflects the extreme Rb loss in the completely albitized samples, effectively freezing 87Sr/86Sr ratios in the albite granites at very high values (0·725-0·735). This indicates either infiltration of highly radiogenic Sr from the country rock or, more likely, radiogenic ingrowth during a considerable time lag (estimated to be at least 300 Myr) between original intrusion and albitization. The albitization took place at ∼350-400°C. It was caused by the infiltration of an ascending hydrothermal fluid that had acquired high Na/K and Na/Ca ratios during migration through metamorphic roc

The common association of mid-crustal migmatites with an upper-level granite pluton could indicate that the migmatites are a feeder zone for the pluton. If magma from a deeper level pervasively intrudes a high temperature metamorphic complex, most of the intruded magma would not freeze because of the prevailing temperature. The interaction between the magma and country rocks, which could include partial melting and crystallisation of the magma passing through, would modify magma to a more granitic composition, as found in the higher-level pluton. The physical aspect of the magma transport through such a hot feeder zone is modelled by introducing a dimensionless melt transport (MT) number, which is the ratio of the rate of melt movement caused by the bulk flow of the entire mass (melt+solid) to that of porous media flow of melt only through the solid framework. The MT number is strongly dependent on the melt content of the melt-rich zone (MRZ), the diameter of the MRZ and typical particle size in the MRZ. The 300-Ma, diatexitic, Lauterbrunnen migmatites (LM) in the Aar massif, Swiss Alps, may be such a feeder zone for the nearby 303-Ma Gastern granite (GG). The chemical and field evidence indicates that the LM formed by an intrusion of intermediate composition magma, which interacted with country rocks to produce a magma of GG composi

X-ray computed micro tomography (CT) is an alternative technique to the classical methods such as mercury intrusion (MIP) and gas pycnometry (HP) to obtain the porosity, pore-size distribution, and density of porous materials. Besides the advantage of being a nondestructive method, it gives not only bulk properties, but also spatially resolved information. In the present work, uniaxially pressed porous alumina performs activated by titanium were analyzed with both the classical techniques and CT. The benefits and disadvantages of the applied measurement techniques were pointed out and discussed. With the generated data, development was proposed for an infiltration model under ideal conditions for the production of metal matrix composites (MMC) by pressureless melt infiltration of porous ceramic preforms. Therefore, the reliability of the results, received from different investigation techniques, was proved statistically and stereologically.

X-ray computed micro tomography (CT) is an alternative technique to the classical methods such as mercury intrusion (MIP) and gas pycnometry (HP) to obtain the porosity, pore-size distribution, and density of porous materials. Besides the advantage of being a nondestructive method, it gives not only bulk properties, but also spatially resolved information. In the present work, uniaxially pressed porous alumina performs activated by titanium were analyzed with both the classical techniques and CT. The benefits and disadvantages of the applied measurement techniques were pointed out and discussed. With the generated data, development was proposed for an infiltration model under ideal conditions for the production of metal matrix composites (MMC) by pressureless melt infiltration of porous ceramic preforms. Therefore, the reliability of the results, received from different investigation techniques, was proved statistically and stereologically.

Albitization is a common process during which hydrothermal fluids convert plagioclase and/or K-feldspar into nearly pure albite; however, its specific mechanism in granitoids is not well understood. The c. 1700 Ma A-type metaluminous ferroan granites in the Khetri complex of Rajasthan, NW India, have been albitized to a large extent by two metasomatic fronts, an initial transformation of oligoclase to nearly pure albite and a subsequent replacement of microcline by albite, with sharp contacts between the microcline-bearing and microcline-free zones. Albitization has bleached the original pinkish grey granite and turned it white. The mineralogical changes include transformation of oligoclase (∼An12) and microcline (∼Or95) to almost pure albite (∼An0·5-2), amphibole from potassian ferropargasite (XFe 0·84-0·86) to potassic hastingsite (XFe 0·88-0·97) and actinolite (XFe 0·32-0·67), and biotite from annite (XFe 0·71-0·74) to annite (XFe 0·90-0·91). Whole-rock isocon diagrams show that, during albitization, the granites experienced major hydration, slight gain in Si and major gain in Na, whereas K, Mg, Fe and Ca were lost along with Rb, Ba, Sr, Zn, light rare earth elements and U. Whole-rock Sm-Nd isotope data plot on an apparent isochron of 1419 ± 98 Ma and reveal significant disturbance and at least partial resetting of the intrusion age. Severe scatter in the whole-rock Rb-Sr isochron plot reflects the extreme Rb loss in the completely albitized samples, effectively freezing 87Sr/86Sr ratios in the albite granites at very high values (0·725-0·735). This indicates either infiltration of highly radiogenic Sr from the country rock or, more likely, radiogenic ingrowth during a considerable time lag (estimated to be at least 300 Myr) between original intrusion and albitization. The albitization took place at ∼350-400°C. It was caused by the infiltration of an ascending hydrothermal fluid that had acquired high Na/K and Na/Ca ratios during migration through metamorphic roc

The common association of mid-crustal migmatites with an upper-level granite pluton could indicate that the migmatites are a feeder zone for the pluton. If magma from a deeper level pervasively intrudes a high temperature metamorphic complex, most of the intruded magma would not freeze because of the prevailing temperature. The interaction between the magma and country rocks, which could include partial melting and crystallisation of the magma passing through, would modify magma to a more granitic composition, as found in the higher-level pluton. The physical aspect of the magma transport through such a hot feeder zone is modelled by introducing a dimensionless melt transport (MT) number, which is the ratio of the rate of melt movement caused by the bulk flow of the entire mass (melt+solid) to that of porous media flow of melt only through the solid framework. The MT number is strongly dependent on the melt content of the melt-rich zone (MRZ), the diameter of the MRZ and typical particle size in the MRZ. The 300-Ma, diatexitic, Lauterbrunnen migmatites (LM) in the Aar massif, Swiss Alps, may be such a feeder zone for the nearby 303-Ma Gastern granite (GG). The chemical and field evidence indicates that the LM formed by an intrusion of intermediate composition magma, which interacted with country rocks to produce a magma of GG composi