Search

Dimensionality reduction is crucial for controlling nonlinear partial differential equations (PDE) through a "reduce-then-design" strategy, which identifies a reduced-order model and then implements model-based control solutions. However, inaccuracies in the reduced-order modeling can substantially degrade controller performance, especially in PDEs with chaotic behavior. To address this issue, we augment the reduce-then-design procedure with a policy optimization (PO) step. The PO step fine-tunes the model-based controller to compensate for the modeling error from dimensionality reduction. This augmentation shifts the overall strategy into reduce-then-design-then-adapt, where the model-based controller serves as a warm start for PO. Specifically, we study the state-feedback tracking control of PDEs that aims to align the PDE state with a specific constant target subject to a linear-quadratic cost. Through extensive experiments, we show that a few iterations of PO can significantly improve the model-based controller performance. Our approach offers a cost-effective alternative to PDE control using end-to-end reinforcement learning.

Spatiotemporal modeling is critical for understanding complex systems across various scientific and engineering disciplines, but governing equations are often not fully known or computationally intractable due to inherent system complexity. Data-driven reduced-order models (ROMs) offer a promising approach for fast and accurate spatiotemporal forecasting by computing solutions in a compressed latent space. However, these models often neglect temporal correlations between consecutive snapshots when constructing the latent space, leading to suboptimal compression, jagged latent trajectories, and limited extrapolation ability over time. To address these issues, this paper introduces a continuous operator learning framework that incorporates jerk regularization into the learning of the compressed latent space. This jerk regularization promotes smoothness and sparsity of latent space dynamics, which not only yields enhanced accuracy and convergence speed but also helps identify intrinsic latent space coordinates. Consisting of an implicit neural representation (INR)-based autoencoder and a neural ODE latent dynamics model, the framework allows for inference at any desired spatial or temporal resolution. The effectiveness of this framework is demonstrated through a two-dimensional unsteady flow problem governed by the Navier-Stokes equations, highlighting its potential to expedite high-fidelity simulations in various scientific and engineering applications.

In systems governed by nonlinear partial differential equations such as fluid flows, the design of state estimators such as Kalman filters relies on a reduced-order model (ROM) that projects the original high-dimensional dynamics onto a computationally tractable low-dimensional space. However, ROMs are prone to large errors, which negatively affects the performance of the estimator. Here, we introduce the reinforcement learning reduced-order estimator (RL-ROE), a ROM-based estimator in which the correction term that takes in the measurements is given by a nonlinear policy trained through reinforcement learning. The nonlinearity of the policy enables the RL-ROE to compensate efficiently for errors of the ROM, while still taking advantage of the imperfect knowledge of the dynamics. Using examples involving the Burgers and Navier-Stokes equations, we show that in the limit of very few sensors, the trained RL-ROE outperforms a Kalman filter designed using the same ROM. Moreover, it yields accurate high-dimensional state estimates for trajectories corresponding to various physical parameter values, without direct knowledge of the latter., Comment: 24 pages, 15 figures

Many real-world domains require safe decision making in uncertain environments. In this work, we introduce a deep reinforcement learning framework for approaching this important problem. We consider a distribution over transition models, and apply a risk-averse perspective towards model uncertainty through the use of coherent distortion risk measures. We provide robustness guarantees for this framework by showing it is equivalent to a specific class of distributionally robust safe reinforcement learning problems. Unlike existing approaches to robustness in deep reinforcement learning, however, our formulation does not involve minimax optimization. This leads to an efficient, model-free implementation of our approach that only requires standard data collection from a single training environment. In experiments on continuous control tasks with safety constraints, we demonstrate that our framework produces robust performance and safety at deployment time across a range of perturbed test environments., Comment: 37th Conference on Neural Information Processing Systems (NeurIPS 2023)

Designing estimation algorithms for systems governed by partial differential equations (PDEs) such as fluid flows is challenging due to the high-dimensional and oftentimes nonlinear nature of the dynamics, as well as their dependence on unobserved physical parameters. In this paper, we propose two different lightweight and effective methodologies for real-time state estimation of PDEs in the presence of parametric uncertainties. Both approaches combine a Kalman filter with a data-driven polytopic linear reduced-order model obtained by dynamic mode decomposition (DMD). Using examples involving the nonlinear Burgers and Navier-Stokes equations, we demonstrate accurate estimation of both the state and the unknown physical parameter along system trajectories corresponding to various physical parameter values., Comment: Presented at IEEE CDC 2023. arXiv admin note: text overlap with arXiv:2302.01189

We introduce controlgym, a library of thirty-six industrial control settings, and ten infinite-dimensional partial differential equation (PDE)-based control problems. Integrated within the OpenAI Gym/Gymnasium (Gym) framework, controlgym allows direct applications of standard reinforcement learning (RL) algorithms like stable-baselines3. Our control environments complement those in Gym with continuous, unbounded action and observation spaces, motivated by real-world control applications. Moreover, the PDE control environments uniquely allow the users to extend the state dimensionality of the system to infinity while preserving the intrinsic dynamics. This feature is crucial for evaluating the scalability of RL algorithms for control. This project serves the learning for dynamics & control (L4DC) community, aiming to explore key questions: the convergence of RL algorithms in learning control policies; the stability and robustness issues of learning-based controllers; and the scalability of RL algorithms to high- and potentially infinite-dimensional systems. We open-source the controlgym project at https://github.com/xiangyuan-zhang/controlgym., Comment: 25 pages, 16 figures

We introduce the receding-horizon policy gradient (RHPG) algorithm, the first PG algorithm with provable global convergence in learning the optimal linear estimator designs, i.e., the Kalman filter (KF). Notably, the RHPG algorithm does not require any prior knowledge of the system for initialization and does not require the target system to be open-loop stable. The key of RHPG is that we integrate vanilla PG (or any other policy search directions) into a dynamic programming outer loop, which iteratively decomposes the infinite-horizon KF problem that is constrained and non-convex in the policy parameter into a sequence of static estimation problems that are unconstrained and strongly-convex, thus enabling global convergence. We further provide fine-grained analyses of the optimization landscape under RHPG and detail the convergence and sample complexity guarantees of the algorithm. This work serves as an initial attempt to develop reinforcement learning algorithms specifically for control applications with performance guarantees by utilizing classic control theory in both algorithmic design and theoretical analyses. Lastly, we validate our theories by deploying the RHPG algorithm to learn the Kalman filter design of a large-scale convection-diffusion model. We open-source the code repository at \url{https://github.com/xiangyuan-zhang/LearningKF}., Comment: arXiv admin note: text overlap with arXiv:2301.12624

The design automation of analog circuits is a longstanding challenge. This paper presents a reinforcement learning method enhanced by graph learning to automate the analog circuit parameter optimization at the pre-layout stage, i.e., finding device parameters to fulfill desired circuit specifications. Unlike all prior methods, our approach is inspired by human experts who rely on domain knowledge of analog circuit design (e.g., circuit topology and couplings between circuit specifications) to tackle the problem. By originally incorporating such key domain knowledge into policy training with a multimodal network, the method best learns the complex relations between circuit parameters and design targets, enabling optimal decisions in the optimization process. Experimental results on exemplary circuits show it achieves human-level design accuracy (99%) 1.5X efficiency of existing best-performing methods. Our method also shows better generalization ability to unseen specifications and optimality in circuit performance optimization. Moreover, it applies to design radio-frequency circuits on emerging semiconductor technologies, breaking the limitations of prior learning methods in designing conventional analog circuits., Comment: 7 pages, 7 figures. arXiv admin note: substantial text overlap with arXiv:2202.13185

The design automation of analog circuits is a longstanding challenge in the integrated circuit field. This paper presents a deep reinforcement learning method to expedite the design of analog circuits at the pre-layout stage, where the goal is to find device parameters to fulfill desired circuit specifications. Our approach is inspired by experienced human designers who rely on domain knowledge of analog circuit design (e.g., circuit topology and couplings between circuit specifications) to tackle the problem. Unlike all prior methods, our method originally incorporates such key domain knowledge into policy learning with a graph-based policy network, thereby best modeling the relations between circuit parameters and design targets. Experimental results on exemplary circuits show it achieves human-level design accuracy (~99%) with 1.5x efficiency of existing best-performing methods. Our method also shows better generalization ability to unseen specifications and optimality in circuit performance optimization. Moreover, it applies to designing diverse analog circuits across different semiconductor technologies, breaking the limitations of prior ad-hoc methods in designing one particular type of analog circuits with conventional semiconductor technology., Comment: 8 pages, 5 figures, 2 tables, Thirty-Sixth AAAI Conference on Artificial Intelligence, The 1st Annual AAAI Workshop on AI to Accelerate Science and Engineering (AI2ASE)

Safety and robustness are two desired properties for any reinforcement learning algorithm. CMDPs can handle additional safety constraints and RMDPs can perform well under model uncertainties. In this paper, we propose to unite these two frameworks resulting in robust constrained MDPs (RCMDPs). The motivation is to develop a framework that can satisfy safety constraints while also simultaneously offer robustness to model uncertainties. We develop the RCMDP objective, derive gradient update formula to optimize this objective and then propose policy gradient based algorithms. We also independently propose Lyapunov based reward shaping for RCMDPs, yielding better stability and convergence properties., Comment: arXiv admin note: text overlap with arXiv:2010.04870

Data generated from dynamical systems with unknown dynamics enable the learning of state observers that are: robust to modeling error, computationally tractable to design, and capable of operating with guaranteed performance. In this paper, a modular design methodology is formulated, that consists of three design phases: (i) an initial robust observer design that enables one to learn the dynamics without allowing the state estimation error to diverge (hence, safe); (ii) a learning phase wherein the unmodeled components are estimated using Bayesian optimization and Gaussian processes; and, (iii) a re-design phase that leverages the learned dynamics to improve convergence rate of the state estimation error. The potential of our proposed learning-based observer is demonstrated on a benchmark nonlinear system. Additionally, certificates of guaranteed estimation performance are provided., Comment: 23 pages, post-review draft

The goal of this paper is to present a method for simultaneous trajectory and local stabilizing policy optimization to generate local policies for trajectory-centric model-based reinforcement learning (MBRL). This is motivated by the fact that global policy optimization for non-linear systems could be a very challenging problem both algorithmically and numerically. However, a lot of robotic manipulation tasks are trajectory-centric, and thus do not require a global model or policy. Due to inaccuracies in the learned model estimates, an open-loop trajectory optimization process mostly results in very poor performance when used on the real system. Motivated by these problems, we try to formulate the problem of trajectory optimization and local policy synthesis as a single optimization problem. It is then solved simultaneously as an instance of nonlinear programming. We provide some results for analysis as well as achieved performance of the proposed technique under some simplifying assumptions.

In this paper, we focus on the problem of robustifying reinforcement learning (RL) algorithms with respect to model uncertainties. Indeed, in the framework of model-based RL, we propose to merge the theory of constrained Markov decision process (CMDP), with the theory of robust Markov decision process (RMDP), leading to a formulation of robust constrained-MDPs (RCMDP). This formulation, simple in essence, allows us to design RL algorithms that are robust in performance, and provides constraint satisfaction guarantees, with respect to uncertainties in the system's states transition probabilities. The need for RCMPDs is important for real-life applications of RL. For instance, such formulation can play an important role for policy transfer from simulation to real world (Sim2Real) in safety critical applications, which would benefit from performance and safety guarantees which are robust w.r.t model uncertainty. We first propose the general problem formulation under the concept of RCMDP, and then propose a Lagrangian formulation of the optimal problem, leading to a robust-constrained policy gradient RL algorithm. We finally validate this concept on the inventory management problem.

In this paper, we investigate the performance of two first-order optimization algorithms, obtained from forward Euler discretization of finite-time optimization flows. These flows are the rescaled-gradient flow (RGF) and the signed-gradient flow (SGF), and consist of non-Lipscthiz or discontinuous dynamical systems that converge locally in finite time to the minima of gradient-dominated functions. We propose an Euler discretization for these first-order finite-time flows, and provide convergence guarantees, in the deterministic and the stochastic setting. We then apply the proposed algorithms to academic examples, as well as deep neural networks training, where we empirically test their performances on the SVHN dataset. Our results show that our schemes demonstrate faster convergences against standard optimization alternatives.

In this paper, we propose two discontinuous dynamical systems in continuous time with guaranteed prescribed finite-time local convergence to strict local minima of a given cost function. Our approach consists of exploiting a Lyapunov-based differential inequality for differential inclusions, which leads to finite-time stability and thus finite-time convergence with a provable bound on the settling time. In particular, for exact solutions to the aforementioned differential inequality, the settling-time bound is also exact, thus achieving prescribed finite-time convergence. We thus construct a class of discontinuous dynamical systems, of second order with respect to the cost function, that serve as continuous-time optimization algorithms with finite-time convergence and prescribed convergence time. Finally, we illustrate our results on the Rosenbrock function., Comment: Presented at workshop "Beyond First Order Methods in Machine Learning" of NeurIPS 2019

Adaptive control has been one of the main problems studied in control theory. The subject is well understood, yet it has a very active research frontier. This book focuses on a specific subclass of adaptive control, namely, learning-based adaptive control. As systems evolve during time or are exposed to unstructured environments, it is expected that some of their characteristics may change. This book offers a new perspective about how to deal with these variations. By merging together Model-Free and Model-Based learning algorithms, the author demonstrates, using a number of mechatronic examples, how the learning process can be shortened and optimal control performance can be reached and maintained.Includes a good number of Mechatronics Examples of the techniques.Compares and blends Model-free and Model-based learning algorithms.Covers fundamental concepts, state-of-the-art research, necessary tools for modeling, and control.

Adaptive control has been one of the main problems studied in control theory. The subject is well understood, yet it has a very active research frontier. This book focuses on a specific subclass of adaptive control, namely, learning-based adaptive control. As systems evolve during time or are exposed to unstructured environments, it is expected that some of their characteristics may change. This book offers a new perspective about how to deal with these variations. By merging together Model-Free and Model-Based learning algorithms, the author demonstrates, using a number of mechatronic examples, how the learning process can be shortened and optimal control performance can be reached and maintained.Includes a good number of Mechatronics Examples of the techniques.Compares and blends Model-free and Model-based learning algorithms.Covers fundamental concepts, state-of-the-art research, necessary tools for modeling, and control.

Adaptive control has been one of the main problems studied in control theory. The subject is well understood, yet it has a very active research frontier. This book focuses on a specific subclass of adaptive control, namely, learning-based adaptive control. As systems evolve during time or are exposed to unstructured environments, it is expected that some of their characteristics may change. This book offers a new perspective about how to deal with these variations. By merging together Model-Free and Model-Based learning algorithms, the author demonstrates, using a number of mechatronic examples, how the learning process can be shortened and optimal control performance can be reached and maintained.Includes a good number of Mechatronics Examples of the techniques.Compares and blends Model-free and Model-based learning algorithms.Covers fundamental concepts, state-of-the-art research, necessary tools for modeling, and control.

We present a sparse sensing framework based on dynamic mode decomposition (DMD) to identify flow regimes and bifurcations in large-scale thermofluid systems. Motivated by real-time sensing and control of thermal-fluid flows in buildings and equipment, we apply this method to a direct numerical simulation (DNS) data set of a two-dimensional laterally heated cavity. The resulting flow solutions can be divided into several regimes, ranging from steady to chaotic flow. The DMD modes and eigenvalues capture the main temporal and spatial scales in the dynamics belonging to different regimes. Our proposed classification method is data driven, robust w.r.t. measurement noise, and exploits the dynamics extracted from the DMD method. Namely, we construct an augmented DMD basis, with “built-in” dynamics, given by the DMD eigenvalues. This allows us to employ a short time series of data from sensors, to more robustly classify flow regimes, particularly in the presence of measurement noise. We also exploit the incoherence exhibited among the data generated by different regimes, which persists even if the number of measurements is small compared to the dimension of the DNS data. The data-driven regime identification algorithm can enable robust low-order modeling of flows for state estimation and control.

We present some results on stabilization for reduced-order models (ROMs) of partial differential equations. The stabilization is achieved using Lyapunov theory to design a new closure model that is robust to parametric uncertainties. The free parameters in the proposed ROM stabilization method are optimized using a model-free multi-parametric extremum seeking (MES) algorithm. The 3D Boussinesq equations provide a challenging numerical test-problem that is used to demonstrate the advantages of the proposed method., Comment: arXiv admin note: text overlap with arXiv:1510.01728

In this paper, we study a tracking control problem for linear time-invariant systems, with model parametric uncertainties, under input and states constraints. We apply the idea of modular design introduced in Benosman et al. 2014, to solve this problem in the model predictive control (MPC) framework. We propose to design an MPC with input-to-state stability (ISS) guarantee, and complement it with an extremum seeking (ES) algorithm to iteratively learn the model uncertainties. The obtained MPC algorithms can be classified as iterative learning control (ILC)-MPC.

We present results on stabilization for reduced order models (ROM) of partial differential equations using learning. Stabilization is achieved via closure models for ROMs, where we use a model-free extremum seeking (ES) dither-based algorithm to learn the best closure models' parameters, for optimal ROM stabilization. We first propose to auto-tune linear closure models using ES, and then extend the results to a closure model combining linear and nonlinear terms, for better stabilization performance. The coupled Burgers' equation is employed as a test-bed for the proposed tuning method.

We study in this paper the problem of adaptive trajectory tracking control for a class of nonlinear systems with parametric uncertainties. We propose to use a modular approach, where we first design a robust nonlinear state feedback which renders the closed loop input-to-state stable (ISS), where the input is considered to be the estimation error of the uncertain parameters, and the state is considered to be the closed-loop output tracking error. Next, we augment this robust ISS controller with a model-free learning algorithm to estimate the model uncertainties. We implement this method with two different learning approaches. The first one is a model-free multi-parametric extremum seeking (MES) method and the second is a Bayesian optimization-based method called Gaussian Process Upper Confidence Bound (GP-UCB). The combination of the ISS feedback and the learning algorithms gives a learning-based modular indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example., Comment: arXiv admin note: text overlap with arXiv:1507.05120

We study in this paper the problem of adaptive trajectory tracking for nonlinear systems affine in the control with bounded state-dependent and time-dependent uncertainties. We propose to use a modular approach, in the sense that we first design a robust nonlinear state feedback which renders the closed loop input to state stable(ISS) between an estimation error of the uncertain parameters and an output tracking error. Next, we complement this robust ISS controller with a model-free multiparametric extremum seeking (MES) algorithm to estimate the model uncertainties. The combination of the ISS feedback and the MES algorithm gives an indirect adaptive controller. We show the efficiency of this approach on a two-link robot manipulator example.

In this work we study the problem of rope sway dynamics control for elevator systems. We choose to actuate the system with a semi-active damper mounted on the top of the elevator car. We propose nonlinear controllers based on Lyapunov theory, to actuate the semi-active damper and stabilize the rope sway dynamics. We study the stability of the proposed controllers, and test their performances on a numerical example.

In this work we study the problem of adaptive MPC for linear time-invariant uncertain models. We assume linear models with parametric uncertainties, and propose an iterative multi-variable extremum seeking (MES)-based learning MPC algorithm to learn on-line the uncertain parameters and update the MPC model. We show the effectiveness of this algorithm on a DC servo motor control example., Comment: To appear at the IEEE MSC 2014

We study in this paper the problem of iterative feedback gains tuning for a class of nonlinear systems. We consider Input-Output linearizable nonlinear systems with additive uncertainties. We first design a nominal Input-Output linearization-based controller that ensures global uniform boundedness of the output tracking error dynamics. Then, we complement the robust controller with a model-free multi-parametric extremum seeking (MES) control to iteratively auto-tune the feedback gains. We analyze the stability of the whole controller, i.e. robust nonlinear controller plus model-free learning algorithm. We use numerical tests to demonstrate the performance of this method on a mechatronics example., Comment: To appear at the IEEE CDC 2015