1. Reprocessing and Characterization of Polybenzimidazole for High-Temperature Polymer Electrolyte Membrane Fuel Cells
- Author
-
Björkengren, Douglas and Björkengren, Douglas
- Abstract
A reprocessing method of poly(2,2’-(m-phenylene)-5,5’-bibenzimidazole) (PBI) membranes recovered from the production line of High-Temperature Polymer Electrolyte Membrane Fuel Cells (HT-PEMFC) at Blue World Technologies (BWT) has been developed in order to reduce material loss in the production. Redissolution of scrap PBI membranes in poly(phosphoric acid) (PPA) and phosphoric acid (PA) was successful and the subsequent washing procedure produced PBI that could be redissolved in N,N-dimethyl acetamide (DMAc) and suitable for solution casting of new membranes. The reprocessed PBI and the membranes cast from it were characterized with respect to molecular weight, structural purity, acid doping behavior, thermal stability, mechanical strength, proton conductivity and fuel cell performance using pristine PBI membranes as the reference point. A reduction of the molecular weight was observed after the redissolution, which was speculated to be caused by hydrolysis of weak amide bonds due to structural defects in the polymer backbone. After doping in 85 wt.% PA, the tensile properties and the ex-situ proton conductivity were slightly decreased in comparison to the pristine reference material which could reasonably be explained by deviations in the membrane thickness and doping level. No apparent difference in properties depending on which solvent was used in the redissolution was observed. Fuel cell testing indicated similar performance between reprocessed and pristine PBI membranes, thus demonstrating the viability of the attempted recycling method., In order to reduce greenhouse gas emissions, there has been an incentive to develop alternatives to the combustion engine that are not dependent on the use of fossil fuels. An interesting option is fuel cell technology as it offers the possibility of using renewable fuels which can effectively decrease carbon dioxide emissions. In this master thesis project a recycling method for a polymer used in the production of fuel cells at Blue World Technologies was successfully developed with the purpose of reducing economic costs and increasing the sustainability of their production process. The release of greenhouse gases into the atmosphere is continuing to increase the global surface temperature – rapidly changing the climate on our planet. The effects of climate change are already noticeable all around world with an increased frequency of extreme weathers, floodings and food and water scarcity. Carbon dioxide has been identified as the most prominent greenhouse gas and is the cause for roughly three quarters of the global warming. The majority of carbon dioxide emissions come from the combustion of fossil fuels including petroleum, coal and natural gas. Clearly, there is a need for technological development that allows us to not be reliant on the use of fossil fuels in order to save the planet. In the last decades, Polymer Electrolyte Membrane Fuel Cell (PEMFC) technology has emerged as a potential candidate to replace the combustion engine. A PEMFC is a device that converts chemical energy into electricity through electrochemical reactions. It works like an ordinary battery – with the difference being that a fuel cell can continue to operate as long as a fuel is fed to it. By using renewable fuels it can supply electrical power while providing a significant reduction of carbon dioxide and other particle emissions! A challenge with developing the fuel cell technology is to make it economically viable in comparison to the combustion engine. One way to achieve this is to
- Published
- 2023