Search

This paper proposes a new method for accurately predicting rotating machine properties using a deep neural network (DNN). In this method, the magnetic field distribution over a cross-section of a rotating machine at a fixed mechanical angle is used as the input data for the DNN. The prediction accuracy of the torque properties of an inner permanent magnet (IPM) motor for the CNNs trained by the magnetic flux density distribution and material configuration is compared. It is shown that the proposed method facilitates a more accurate prediction of machine performance than a conventional method in which the cross-sectional image of a rotating machine is input to the DNN. Furthermore, the DNN learned by the proposed method is applied to the topology optimization algorithm. Topology optimization can be effectively accelerated because the number of analyses by the finite element method can be reduced using the proposed method. The total computing cost is reduced by 52.5% compared with conventional optimization without surrogate models.

In this study, we propose a fast topology optimization (TO) method based on a deep neural network (DNN) that predicts the current-dependent motor torque characteristics using its cross-sectional image. The trained DNN is shown to provide the current condition that provides the maximum torque under the assumed motor control method. The proposed method helps perform TO with a reduced number of field computations while maintaining a high search capability.

This paper proposes a new method for accurately predicting rotating machine properties using a deep neural network (DNN). In this method, the magnetic field distribution over a cross-section of a rotating machine at a fixed mechanical angle is used as the input data for the DNN. The prediction accuracy of the torque properties of an inner permanent magnet (IPM) motor for the CNNs trained by the magnetic flux density distribution and material configuration is compared. It is shown that the proposed method facilitates a more accurate prediction of machine performance than a conventional method in which the cross-sectional image of a rotating machine is input to the DNN. Furthermore, the DNN learned by the proposed method is applied to the topology optimization algorithm. Topology optimization can be effectively accelerated because the number of analyses by the finite element method can be reduced using the proposed method. The total computing cost is reduced by 52.5% compared with conventional optimization without surrogate models.

In this study, we propose a fast topology optimization (TO) method based on a deep neural network (DNN) that predicts the current-dependent motor torque characteristics using its cross-sectional image. The trained DNN is shown to provide the current condition that provides the maximum torque under the assumed motor control method. The proposed method helps perform TO with a reduced number of field computations while maintaining a high search capability.

This paper proposes a new method for accurately predicting rotating machine properties using a deep neural network (DNN). In this method, the magnetic field distribution over a cross-section of a rotating machine at a fixed mechanical angle is used as the input data for the DNN. The prediction accuracy of the torque properties of an inner permanent magnet (IPM) motor for the CNNs trained by the magnetic flux density distribution and material configuration is compared. It is shown that the proposed method facilitates a more accurate prediction of machine performance than a conventional method in which the cross-sectional image of a rotating machine is input to the DNN. Furthermore, the DNN learned by the proposed method is applied to the topology optimization algorithm. Topology optimization can be effectively accelerated because the number of analyses by the finite element method can be reduced using the proposed method. The total computing cost is reduced by 52.5% compared with conventional optimization without surrogate models.

In this study, we propose a fast topology optimization (TO) method based on a deep neural network (DNN) that predicts the current-dependent motor torque characteristics using its cross-sectional image. The trained DNN is shown to provide the current condition that provides the maximum torque under the assumed motor control method. The proposed method helps perform TO with a reduced number of field computations while maintaining a high search capability.

This paper proposes a new method for accurately predicting rotating machine properties using a deep neural network (DNN). In this method, the magnetic field distribution over a cross-section of a rotating machine at a fixed mechanical angle is used as the input data for the DNN. The prediction accuracy of the torque properties of an inner permanent magnet (IPM) motor for the CNNs trained by the magnetic flux density distribution and material configuration is compared. It is shown that the proposed method facilitates a more accurate prediction of machine performance than a conventional method in which the cross-sectional image of a rotating machine is input to the DNN. Furthermore, the DNN learned by the proposed method is applied to the topology optimization algorithm. Topology optimization can be effectively accelerated because the number of analyses by the finite element method can be reduced using the proposed method. The total computing cost is reduced by 52.5% compared with conventional optimization without surrogate models.

In this study, we propose a fast topology optimization (TO) method based on a deep neural network (DNN) that predicts the current-dependent motor torque characteristics using its cross-sectional image. The trained DNN is shown to provide the current condition that provides the maximum torque under the assumed motor control method. The proposed method helps perform TO with a reduced number of field computations while maintaining a high search capability.

This paper presents a new topology optimization of interior permanent magnet (IPM) motors using the genetic algorithm with aid of the deep leaning. The data composed of the rotor shape of an IPM motor and its performance, obtained by a prior topology optimization process, is input to a convolutional neural network (CNN). After the learning process, CNN is shown to provide fairly accurate estimate of the motor performance. During the posterior topology optimization, the finite element analysis (FEA) is carried out only for the limited number of individuals; probability that FEA is performed increases with the motor performance evaluated by CNN. It is shown that the computing time is reduced to about 1/10 without deterioration of the optimization performance with aid of the deep learning.

The computational cost of topology optimization based on the stochastic algorithm is shown to be greatly reduced by deep learning. In the learning phase, the cross-sectional image of an interior permanent magnet motor, represented in RGB, is used to train a convolutional neural network (CNN) to infer the torque properties. In the optimization phase, all the individuals are approximately evaluated by the trained CNN, while finite element analysis for accurate evaluation is performed only for a limited number of individuals. It is numerically shown that the computational cost for the topology optimization can be reduced without the loss of optimization quality.

This paper presents the fast topology optimization methods for rotating machines based on deep learning. The cross-sectional image of electric motors and their performances obtained during a multi-objective topology optimization based on the finite-element method and genetic algorithm (GA) is used for training of the convolutional neural network (CNN). Two different approaches are proposed: 1) CNN trained by preliminary optimization with a small population for GA is used for the main optimization with a large population and 2) CNN is used for screening of torque performances in the optimization with respect to the motor efficiency.

This paper presents a new topology optimization of interior permanent magnet (IPM) motors using the genetic algorithm with aid of the deep leaning. The data composed of the rotor shape of an IPM motor and its performance, obtained by a prior topology optimization process, is input to a convolutional neural network (CNN). After the learning process, CNN is shown to provide fairly accurate estimate of the motor performance. During the posterior topology optimization, the finite element analysis (FEA) is carried out only for the limited number of individuals; probability that FEA is performed increases with the motor performance evaluated by CNN. It is shown that the computing time is reduced to about 1/10 without deterioration of the optimization performance with aid of the deep learning.

The computational cost of topology optimization based on the stochastic algorithm is shown to be greatly reduced by deep learning. In the learning phase, the cross-sectional image of an interior permanent magnet motor, represented in RGB, is used to train a convolutional neural network (CNN) to infer the torque properties. In the optimization phase, all the individuals are approximately evaluated by the trained CNN, while finite element analysis for accurate evaluation is performed only for a limited number of individuals. It is numerically shown that the computational cost for the topology optimization can be reduced without the loss of optimization quality.

This paper presents the fast topology optimization methods for rotating machines based on deep learning. The cross-sectional image of electric motors and their performances obtained during a multi-objective topology optimization based on the finite-element method and genetic algorithm (GA) is used for training of the convolutional neural network (CNN). Two different approaches are proposed: 1) CNN trained by preliminary optimization with a small population for GA is used for the main optimization with a large population and 2) CNN is used for screening of torque performances in the optimization with respect to the motor efficiency.

This paper presents the fast topology optimization methods for rotating machines based on deep learning. The cross-sectional image of electric motors and their performances obtained during a multi-objective topology optimization based on the finite-element method and genetic algorithm (GA) is used for training of the convolutional neural network (CNN). Two different approaches are proposed: 1) CNN trained by preliminary optimization with a small population for GA is used for the main optimization with a large population and 2) CNN is used for screening of torque performances in the optimization with respect to the motor efficiency.

The computational cost of topology optimization based on the stochastic algorithm is shown to be greatly reduced by deep learning. In the learning phase, the cross-sectional image of an interior permanent magnet motor, represented in RGB, is used to train a convolutional neural network (CNN) to infer the torque properties. In the optimization phase, all the individuals are approximately evaluated by the trained CNN, while finite element analysis for accurate evaluation is performed only for a limited number of individuals. It is numerically shown that the computational cost for the topology optimization can be reduced without the loss of optimization quality.

The computational cost of topology optimization based on the stochastic algorithm is shown to be greatly reduced by deep learning. In the learning phase, the cross-sectional image of an interior permanent magnet motor, represented in RGB, is used to train a convolutional neural network (CNN) to infer the torque properties. In the optimization phase, all the individuals are approximately evaluated by the trained CNN, while finite element analysis for accurate evaluation is performed only for a limited number of individuals. It is numerically shown that the computational cost for the topology optimization can be reduced without the loss of optimization quality.

This paper presents the fast topology optimization methods for rotating machines based on deep learning. The cross-sectional image of electric motors and their performances obtained during a multi-objective topology optimization based on the finite-element method and genetic algorithm (GA) is used for training of the convolutional neural network (CNN). Two different approaches are proposed: 1) CNN trained by preliminary optimization with a small population for GA is used for the main optimization with a large population and 2) CNN is used for screening of torque performances in the optimization with respect to the motor efficiency.

This paper presents a new topology optimization of interior permanent magnet (IPM) motors using the genetic algorithm with aid of the deep leaning. The data composed of the rotor shape of an IPM motor and its performance, obtained by a prior topology optimization process, is input to a convolutional neural network (CNN). After the learning process, CNN is shown to provide fairly accurate estimate of the motor performance. During the posterior topology optimization, the finite element analysis (FEA) is carried out only for the limited number of individuals; probability that FEA is performed increases with the motor performance evaluated by CNN. It is shown that the computing time is reduced to about 1/10 without deterioration of the optimization performance with aid of the deep learning.

This paper presents a new topology optimization method based on basis functions for design of rotating machines. In this method, the core shape of a given rotating machine is represented by the linear combination of the basis functions. The shape is then freely deformed by changing the weighting coefficients to the basis functions to find the optimal shape. The proposed method is compared with the conventional shape optimization based on polygon morphing. The former is shown to outperform the latter in both interior permanent magnet and synchronous motor models.

This paper presents a new topology optimization method based on basis functions for design of rotating machines. In this method, the core shape of a given rotating machine is represented by the linear combination of the basis functions. The shape is then freely deformed by changing the weighting coefficients to the basis functions to find the optimal shape. The proposed method is compared with the conventional shape optimization based on polygon morphing. The former is shown to outperform the latter in both interior permanent magnet and synchronous motor models.

This paper presents a new topology optimization method based on basis functions for design of rotating machines. In this method, the core shape of a given rotating machine is represented by the linear combination of the basis functions. The shape is then freely deformed by changing the weighting coefficients to the basis functions to find the optimal shape. The proposed method is compared with the conventional shape optimization based on polygon morphing. The former is shown to outperform the latter in both interior permanent magnet and synchronous motor models.

This paper presents a new topology optimization method based on basis functions for design of rotating machines. In this method, the core shape of a given rotating machine is represented by the linear combination of the basis functions. The shape is then freely deformed by changing the weighting coefficients to the basis functions to find the optimal shape. The proposed method is compared with the conventional shape optimization based on polygon morphing. The former is shown to outperform the latter in both interior permanent magnet and synchronous motor models.