Search

In practical engineering systems, unknown actuator, sensor or system component faults frequently occur, which results from component and interconnection failures, degrade control performance, system stability, and profitability, and even arise hazardous situation. To avoid abnormal activity like faults and maintain system control performance subject to faults occurring into the system, the Fault-tolerant Control (FTC) is a realistic approach to address the unwanted situation. The two-tank conical system is widely used in chemical and food process industries because of its greater advantages. The non-interacting configuration of the two-tank conical system is highly nonlinear due to its shape and varying area of the tank thought the height of the tank, as a consequence level control of this system is extremely difficult. The paper attributes to design a Passive Fault-tolerant Control Strategy (PFTCS) for a Two-tank conical Non Interacting Level Control System (TTCNILCS) subject to the major system (leak), sensor, and actuator faults with external process disturbances. PFTC will increase system control performance and system stability acceptable level in the presence of sensor, system, and actuator faults. The simulation results demonstrate the proposed PFTC strategy has definite fault tolerant ability against the system and actuator faults also it has good disturbance rejection capability. To verify the efficacy of the proposed PFTC strategy Mean Square Error (MSE) and Root Mean Square Error (RMSE) Integral Absolute Error (IAE) indices are used.

In practical engineering systems, unknown actuator, sensor or system component faults frequently occur, which results from component and interconnection failures, degrade control performance, system stability, and profitability, and even arise hazardous situation. To avoid abnormal activity like faults and maintain system control performance subject to faults occurring into the system, the Fault-tolerant Control (FTC) is a realistic approach to address the unwanted situation. The two-tank conical system is widely used in chemical and food process industries because of its greater advantages. The non-interacting configuration of the two-tank conical system is highly nonlinear due to its shape and varying area of the tank thought the height of the tank, as a consequence level control of this system is extremely difficult. The paper attributes to design a Passive Fault-tolerant Control Strategy (PFTCS) for a Two-tank conical Non Interacting Level Control System (TTCNILCS) subject to the major system (leak), sensor, and actuator faults with external process disturbances. PFTC will increase system control performance and system stability acceptable level in the presence of sensor, system, and actuator faults. The simulation results demonstrate the proposed PFTC strategy has definite fault tolerant ability against the system and actuator faults also it has good disturbance rejection capability. To verify the efficacy of the proposed PFTC strategy Mean Square Error (MSE) and Root Mean Square Error (RMSE) Integral Absolute Error (IAE) indices are used.

Nardostachys jatamansi, Achyranthus aspera and Trachyspermum ammi are very important medicinal plants which are traditionally used in many medical conditions. The present study involves Pharmacognosy and preliminary phytochemical investigations of the rhizomes, whole plant and fruit parts of above three plants respectively .This study consist of the morphological and microscopical study of the plant; the phytochemical screening and testing for alkaloids, glycosides, tannins, steroids and flavonoids; TLC study and HPTLC fingerprinting. The parameters from the above were recorded with an objective of drawing an attention on the plant as well as a reference for further scientific investigations.  Keywords: Nardostachys jatamansi, Achyranthus aspera, Trachyspermum ammi, Flavanoids,  Microscopical, Pharmacognosy.

Nardostachys jatamansi, Achyranthus aspera and Trachyspermum ammi are very important medicinal plants which are traditionally used in many medical conditions. The present study involves Pharmacognosy and preliminary phytochemical investigations of the rhizomes, whole plant and fruit parts of above three plants respectively .This study consist of the morphological and microscopical study of the plant; the phytochemical screening and testing for alkaloids, glycosides, tannins, steroids and flavonoids; TLC study and HPTLC fingerprinting. The parameters from the above were recorded with an objective of drawing an attention on the plant as well as a reference for further scientific investigations.  Keywords: Nardostachys jatamansi, Achyranthus aspera, Trachyspermum ammi, Flavanoids,  Microscopical, Pharmacognosy.

Scheduling in Grid computing has been active area of research since its beginning. However, beginners find very difficult to understand related concepts due to a large learning curve of Grid computing. Thus, there is a need of concise understanding of scheduling in Grid computing area. This paper strives to present concise understanding of scheduling and related understanding of Grid computing system. The paper describes overall picture of Grid computing and discusses important sub-systems that enable Grid computing possible. Moreover, the paper also discusses concepts of resource scheduling and application scheduling and also presents classification of scheduling algorithms. Furthermore, the paper also presents methodology used for evaluating scheduling algorithms including both real system and simulation based approaches. The presented work on scheduling in Grid containing concise understandings of scheduling system, scheduling algorithm, and scheduling methodology would be very useful to users and researchers, Comment: Fourth International Conference on Advanced Computing & Communication Technologies (ACCT), 2014

Remote job submission and execution is fundamental requirement of distributed computing done using Cluster computing. However, Cluster computing limits usage within a single organization. Grid computing environment can allow use of resources for remote job execution that are available in other organizations. This paper discusses concepts of batch-job execution using LRM and using Grid. The paper discusses two ways of preparing test Grid computing environment that we use for experimental testing of concepts. This paper presents experimental testing of remote job submission and execution mechanisms through LRM specific way and Grid computing ways. Moreover, the paper also discusses various problems faced while working with Grid computing environment and discusses their trouble-shootings. The understanding and experimental testing presented in this paper would become very useful to researchers who are new to the field of job management in Grid., Comment: Fourth International Conference on Advanced Computing & Communication Technologies (ACCT), 2014

In the last decade, scheduling of Directed Acyclic Graph (DAG) application in the context of Grid environment has attracted attention of many researchers. However, deployment of Grid environment requires skills, efforts, budget, and time. Although various simulation toolkits or frameworks are available for simulating Grid environment, either they support different possible studies in Grid computing area or takes lot of efforts in molding them to make them suitable for scheduling of DAG application. In this paper, we describe design and implementation of GridSim based ready to use application scheduler for scheduling of DAG application in Grid environment. The proposed application scheduler supports supplying DAG application and configuration of Grid resources through GUI. We also describe implementation of Min-Min static scheduling algorithm for scheduling of DAG application to validate the proposed scheduler. Our proposed DAG application scheduling simulator is useful, easy, and time-saver., Comment: 7 pages, 9 figures, 1 table