Search

Die Durchbiegung von Stahlträgern ist bei der Überwachung von Bauwerken von besonderem Interesse, um Aussagen zur Stabilität dieser machen zu können. In vielen Fällen ist ein direktes Messen der Durchbiegung nicht möglich, so dass diese über andere Messgrößen bestimmt werden muss und eine Beziehung zwischen verschiedenen Größen zu modellieren ist. Längsdehnungen und Durchbiegungen stehen vereinfacht ausgedrückt für den Fall der mittleren Durchbiegung bei Stahlträgern in einer linearen Beziehung. Werden für die Sensoren aber auf Adaptern am Träger installiert, dann muss der Einfluss dieser im Dehnungs-Durchbiegungs-Modell berücksichtigt werden. Die empirische Bestimmung des Einflusses und die Erstellung eines einfachen Kongruenzmodells für diesen Fall liegen im Fokus dieser Untersuchungen.

Highlights • Improved position accuracy of up to 0.08 cm using SAPOS®-corrected DGNSS • High-resolution snippet backscatter to detect and monitor UXO and its environment • Combined evaluation of bathymetry, backscatter intensities, and sediments Abstract The present study reports the evaluation of snippet backscatter information gathered with a high-frequency multibeam echosounder system (200–400 kHz) due to their usability to detect ammunition of different sizes in shallow coastal waters. Besides the feasibility of the snippet backscatter data, it was focused on the attainable horizontal accuracy in comparison to side-scan sonar and autonomous underwater vehicle (AUV) surveys. The data was collected in shallow coastal waters of up to 18 m water depth (Baltic Sea) close to an ammunition dumping site characterized by an almost flat seafloor covered with sand and silt sediments. The analysis of the multibeam compared to sidescan data indicates the snippet backscatter to be a promising prospective method for ammunition detection and being able to improve horizontal position accuracy of up to 0.08 m.

Highlights • Improved position accuracy of up to 0.08 cm using SAPOS®-corrected DGNSS • High-resolution snippet backscatter to detect and monitor UXO and its environment • Combined evaluation of bathymetry, backscatter intensities, and sediments Abstract The present study reports the evaluation of snippet backscatter information gathered with a high-frequency multibeam echosounder system (200–400 kHz) due to their usability to detect ammunition of different sizes in shallow coastal waters. Besides the feasibility of the snippet backscatter data, it was focused on the attainable horizontal accuracy in comparison to side-scan sonar and autonomous underwater vehicle (AUV) surveys. The data was collected in shallow coastal waters of up to 18 m water depth (Baltic Sea) close to an ammunition dumping site characterized by an almost flat seafloor covered with sand and silt sediments. The analysis of the multibeam compared to sidescan data indicates the snippet backscatter to be a promising prospective method for ammunition detection and being able to improve horizontal position accuracy of up to 0.08 m.

Highlights • Improved position accuracy of up to 0.08 cm using SAPOS®-corrected DGNSS • High-resolution snippet backscatter to detect and monitor UXO and its environment • Combined evaluation of bathymetry, backscatter intensities, and sediments Abstract The present study reports the evaluation of snippet backscatter information gathered with a high-frequency multibeam echosounder system (200–400 kHz) due to their usability to detect ammunition of different sizes in shallow coastal waters. Besides the feasibility of the snippet backscatter data, it was focused on the attainable horizontal accuracy in comparison to side-scan sonar and autonomous underwater vehicle (AUV) surveys. The data was collected in shallow coastal waters of up to 18 m water depth (Baltic Sea) close to an ammunition dumping site characterized by an almost flat seafloor covered with sand and silt sediments. The analysis of the multibeam compared to sidescan data indicates the snippet backscatter to be a promising prospective method for ammunition detection and being able to improve horizontal position accuracy of up to 0.08 m.

The research project with the working title "Design and development of a low-cost modular Aerial Mobile Mapping System" was formed during the last year as the result from numerous discussions and considerations with colleagues from the HafenCity University Hamburg, Department Geomatics. The aim of the project is to design a sensor platform which can be embedded preferentially on an UAV, but also can be integrated on any adaptable vehicle. The system should perform a direct scanning of surfaces with a laser scanner and supported through sensors for determining the position and attitude of the platform. The modular design allows his extension with other sensors such as multispectral cameras, digital cameras or multiple cameras systems.

The research project with the working title "Design and development of a low-cost modular Aerial Mobile Mapping System" was formed during the last year as the result from numerous discussions and considerations with colleagues from the HafenCity University Hamburg, Department Geomatics. The aim of the project is to design a sensor platform which can be embedded preferentially on an UAV, but also can be integrated on any adaptable vehicle. The system should perform a direct scanning of surfaces with a laser scanner and supported through sensors for determining the position and attitude of the platform. The modular design allows his extension with other sensors such as multispectral cameras, digital cameras or multiple cameras systems.

A great deal of empirical studies have investigated the characteristics of terrestrial refraction. However, only few of these are concerned with short-term fluctuations of refraction influences. The aim of the present work is to analyze the short-term characteristics (amplitudes and variations at scales of minutes to hours) of terrestrial refraction in the lower atmosphere around 1.8 m above the grass surface. We apply the known method of simultaneous reciprocal vertical angle measurements to derive time series of the refraction coefficient k as a measure for refraction. Our study uses a new setup of two pairs of total stations for parallel observations of the refraction coefficient along adjacent lines of sight. Such a controlled experiment not only allows us to determine refraction coefficients independently but also to assess measurement errors from the residuals between refraction coefficient pairs.Over five observation days in the summer of 2008, a total of 33 h of parallel observation data of the refraction coefficient were collected at sampling frequencies of 1 min. On one observation day, unique parallel observations of the refraction coefficient along three lines of sight with a total of six total stations were possible. For mostly sunny days, we found wave-like and sawtooth-like fluctuations of the refraction coefficient with amplitudes of 1–1.5 at time scales of 10–30 min. On cloudy days, the amplitudes of fluctuations were on the order of 0.5. Our refraction experiments show a variation range of k between −4 and +16 near the ground on sunny summer days. This equates to vertical temperature gradients between −0.5 and −0.1 K/m during the day and 1–2 K/m shortly after sunset. Cloud cover reduces the variability of k to a range of −2 to +5. Our results show that the frequently used Gaussian refraction coefficient of +0.13 is not suited for describing refraction effects in the lower atmosphere. As a conclusion, our results may be helpful to better assess the