Search

Ovaj rad opisuje različite pogone tvornice za proizvodnju i preradu papira DS Smith. To su pogon za proizvodnju i preradu starog papira, proizvodnju kartonske ambalaže i pogon za proizvodnju električne i toplinske energije. U pogonu za proizvodnju i preradu papira navedeni su i opisani strojevi: (papir stroj 2 i papir stroj 3) koji sudjeluju u cijelom procesu prerade starog papira u papirne role. Na Wellpap stroju se od papirnih rola proizvode kartonske ploče. Strojevi (Bobst masterflex 160, Bobst 1600, Martin 924, Signode/Octopus) služe za tisak, štancanje i pakiranje kartonske ambalaže. Navedeni su postupci opskrbe, distribucije električne energije i svrha pojedinih elemenata kao što su generatori, transformatori i diesel-agregat. Naglašena je svrha zaštite i signalizacije u sustavu. Cijeli sadržaj je popraćen odgovarajućim slikama i shemama koje služe za približavanje slike rada pogona. This paper describes the various facilities of the DS Smith paper mill. These are the plant for production and processing of waste paper, the production of cardboard packaging and the plant for the production of electricity and thermal energy. In the plant for the production and processing of paper, the following machines are listed and described: (paper machine 2 and paper machine 3) which participate in the entire process of processing waste paper into paper rolls. Cardboard panels are produced from paper rolls on the Wellpap machine. Machines ((Bobst masterflex 160, Bobst 1600, Martin 924, Signode/Octopus) are used for printing, stamping and packaging of cardboard packaging. The procedures for supply and distribution of electricity and purpose of individual elements such as generators, transformers and diesel-generators are listed. The purpose of protection and signaling in the system is emphasized. The entire content is accompanied by appropriate pictures and diagrams that serve to bring the picture of the operation of the drive closer.

Cilj istraživanja Cilj ovog presječnog istraživanja bio je ispitati je li format diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu u skladu s IMRaD strukturom izvornih znanstvenih članaka s obzirom na dužine glavnih cjelina u tekstu diplomskog rada – Uvoda, Metoda, Rezultata i Rasprave. Materijali i metode Iz digitalnog akademskog arhiva i repozitorija DABAR prikupljeno je 150 diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu u razdoblju od 2016. do 2021. godine. Dužine cjelina diplomskih radova (Uvod, Ciljevi istraživanja, Metode, Rezultati, Rasprava, Zaključak, Sažetak na hrvatskom jeziku, Sažetak na engleskom jeziku) iskazane su brojem riječi, a dužina IMRaD strukture zbrojem riječi Uvoda, Metoda, Rezultata i Rasprave. Podatci su analizirani opisnom statistikom i linearnom regresijom (jednostavna i višestruka). Rezultati U prosjeku po godini je obranjeno 25 diplomskih radova (25 ±1,88) pri čemu najviše u 2019. godini (31 rad), a najmanje u 2018. godini (18 radova). Prema granama dentalne medicine, najzastupljenije su bile teme iz Oralne medicine, Endodoncije i restaurativne dentalne medicine, Protetike te Dječje i preventivne dentalne medicine (105 radova, 70%) pri čemu je bilo najviše diplomskih radova s temama iz Oralne medicine (32 rada, 21,33%). S dužinom IMRaD strukture najjače korelira dužina Uvoda (R = 0,819; R2 = 0,671), potom Rezultata (R = 0,768; R2 = 0,589), dok su dužine Rasprave (R = 0,592; R2 = 0,351) i Metoda (R = 0,197; R2 = 0,039) slabo ili nikako povezane s dužinom IMRaD strukture. U prosjeku, Uvod zauzima malo manje od polovice prostora unutar IMRaD strukture (48,08% ± 11,69%) kod svih pregledanih diplomskih radova. Zaključak Format diplomskih radova obranjenih na integriranom Studiju dentalne medicine Medicinskog fakulteta Sveučilišta u Splitu nije u skladu s IMRaD strukturom izvornih znanstvenih članaka s obzirom na nesrazmjerno dug Uvod unutar IMRaD strukture., Objective The aim of this cross-sectional study was to investigate whether the format of diploma theses defended in the undergraduate Study of Dental Medicine, University of Split School of Medicine, is compatible with the IMRaD structure of original research papers, considering the relative length of IMRaD sections - Introduction, Methods, Results and Discussion. Materials and methods 150 diploma theses, defended between 2016 and 2021 from undergraduate Study of Dental Medicine at The School of Medicine University of Split between 2016. and 2021, have been collected from The Digital Academic Archives and Repositories DABAR. The length of each section of the thesis (Introduction, Research Objectives, Methods, Results, Discussion, Conclusion, Summary in Croatian and English) was expressed as the number of words. The length of the IMRaD structure was calculated as the total word count of Introduction, Methods, Results and Discussion sections. Data were analyzed using descriptive statistics and linear regression. Results On average, 25 theses were defended per year (25 ±1.88). The majority of theses were clinical research reports, with topics in oral pathology, endodontics and restorative dentistry, prosthodontics, and pediatric dentistry (105 theses, 70%) being the most common. The highest correlation with the length of the IMRaD structure in theses was observed for the Introduction (R = 0.819; R2 = 0.671), followed by the Results (R = 0.768; R2 = 0.589), whereas weak and no correlation were observed for the Discussion (R = 0.592; R2 = 0.351) and Methods (R = 0.197; R2 = 0.039), respectively. On average, the Introduction occupied almost half of the length of the IMRaD structure (48.08% ± 11.69%). Conclusion The format of diploma theses defended in the undergraduate Study of Dental Medicine at The School of Medicine University of Split is not compatible to the IMRaD structure of the original research papers, as the introduction is disproportionately long compared to other sections of the IMRaD structure.

Vlastiti pogon u Koprivnici je Tvrtka otvorila, odnosno pokrenula tijekom 1992. godine, te tada započela s proizvodnjom ambalaže u industrijskoj zoni ovoga grada, prema poslovnom modelu koji je bio temelj poslovanja i u samom sjedištu poduzeća u Danskoj. Tvrtka je danas poduzeće koje se promatra kao vodeći stručnjak na tržištu po pitanju proizvodnje ambalaže od lijevanih vlakana, a svoj uspjeh temelji na održivoj i snažnoj strategiji. Izuzev toga, ističe se i kao vodeći proizvođač tehnologije za proizvodnju ambalaže. Logistički sustav Tvrtke je glavni segment koji će biti analiziran u ovome radu, te sve ono što je direktno povezano s njim. On se sastoji od ukupno pet logističkih procesa, a to su redom: obrada narudžbi, upravljanje zalihama, pakiranje, skladištenje i transport. Posebna pozornost će biti, dakako, kao jednom od logističkih procesa, posvećena skladištenju, jer je on središnje tematika ovog rada. Proces skladištenja se sastoji od nekoliko potprocesa, za čije se izvođenje koristi različita skladišna oprema. Za samo skladište je bitna dobra organizacija, odnosno raspored koji omogućava brz protok materijala u čitavom opskrbnom lancu Tvrtke. Organizacija samog skladišnog poslovanja ovisi o brojnim čimbenicima, kao što su npr. veličina skladišta, vrsta skladišta, stupanj mehanizacije, stupanj automatizacije, sposobnostima i iskustvu zaposlenika, itd. The company opened its own facility in Koprivnica in 1992, and then started producing packaging in the industrial zone of this city, according to the business model that was the basis of the business at the company's headquarters in Denmark. Today, the company is seen as a leading expert on the market in the production of cast fiber packaging, and its success is based on a sustainable and strong strategy. Apart from that, it stands out as a leading manufacturer of technology for the production of packaging. The logistics system of the Company is the main segment that will be analyzed in this paper and everything that is directly related to it. It consists of a of five logistics processes, namely: order processing, inventory management, packaging, storage and transportation. Of course, as one of the logistics processes, special attention will be devoted to storage, because it is the central topic of this paper. The storage process consists of several sub-processes, for the execution of which different storage equipment is used. For the warehouse itself, good organization is essential, that is, a layout that enables a quick flow of materials throughout the Company's supply chain. The organization of the warehouse business itself depends on numerous factors, such as, for example, the size of the warehouse, the type of warehouse, the degree of mechanization, the degree of automation, the skills and experience of the employees, etc.

Baza podataka iz područja molekularne biologije ima izrazito puno. Postoji tendencija okupljanja baza, a time i informacija na jednom mjestu. Navedeno će pridonijeti boljoj preglednosti znanja što može izravno utjecati na kvalitetu istraživačkih radova. Također, iz različitih laboratorija diljem svijeta dolaze podatci o najnovijim otkrićima. Iz tog razloga izrazito je važno pratiti promjene i znanstvena istraživanja temeljiti na najnovijim spoznajama. Rad prikazuje načine pretraživanja informacija u najznačajnijim biološkim bazama podataka: GenBank, UniProtKB, InterPro, PubMed i Europe PMC. Za temu istraživanja odabran je ljudski inzulin koji pripada porodici inzulina, porodici za koju su vezana mnoga znanstvena otkrića i istraživanja. Za pretraživanje o ljudskom inzulinu odabrana je baza UniProtKB jer na jednom mjestu nudi poveznice prema izvorima informacija odnosno prema publikacijama u bazama PubMed i Europe PMC čime je omogućeno postizanje ciljeva istraživanja koji uključuju: bibliometrijsku analizu publikacija čija otkrića grade zapis o ljudskom inzulinu u bazi UniProtKB te s bibliometrijskog aspekta vrednovanje časopisa u kojima su navedene publikacije objavljane. Analizama na razini publikacija dobiven je uvid o: doprinosu pojedinih zemalja i regija u izgradnji spoznaja o ljudskom inzulinu na molekularnoj razini; autorstvu, koautorstvu i suradnji u znanstvenim radovima o ljudskom inzulinu; provedenim istraživanjima o ljudskom inzulinu na molekularnoj razini. Bibliometrijskom analizom znanstvenih časopisa prikazano je na koji način napraviti dublju analizu numeričke vrijednosti h-indeksa te je naglašena važnost iste. Istraživanjem su ujedno dobivene informacije koje časopise iz prirodnog područja odabrati u svrhu napredovanja u znanstvenom i akademskom sustavu. There are many bases in the field of molecular biology. There is a tendency to gather databases and information in one place. This will contribute to a better transparency of knowledge, which can directly affect the quality of research papers. Also, data on the latest discoveries comes from different laboratories around the world. For this reason, it is extremely important to monitor changes and base scientific research on the latest knowledge. The paper shows ways to search for information in the most important biological databases: GenBank, UniProtKB, InterPro, PubMed and Europe PMC. Human insulin, which belongs to the insulin family, was chosen for the research topic, because many discoveries and researches are related to this family of proteins. For the search on human insulin, the UniProtKB database was chosen because it offers links to sources of information in one place, i.e. to publications in the PubMed and Europe PMC databases, which enables the achievement of the research goals, which include bibliometric analysis of publications on human insulin in the UniProtKB database and, from a bibliometric aspect, the evaluation of journals in which mentioned publications published. Analyzes at the level of publications provided insight into: the contribution of individual countries and regions in the development of knowledge about human insulin at the molecular level; authorship, co-authorship and collaboration in scientific papers on human insulin; conducted research on human insulin at the molecular level. The bibliometric analysis of scientific journals shows how to do a deeper analysis of the numerical value of the h-index, and its importance is emphasized. The research also provided information on which journals from the natural field to choose in order to progress in the scientific and academic system.

U okviru teorije narativne persuazije nastoji se istraživanjima publike ustanoviti koji čimbenici, proizišli iz određenih odlika fikcionalne priče, osnažuju potencijal utjecaja te priče na vjerovanja, stavove ili postupke (njezin „persuazivni potencijal“). Političke serije „kvalitetne televizije“ postaju sve značajniji sukreator političke kulture pa nam je namjera bila u okviru teorije narativne persuazije ispitati persuazivni potencijal ove skupine serija. Cilj istraživanja bio je analizirati istaknutosti i povezanosti pet persuazivnih čimbenika koji nisu do sada zajedno promatrani u istraživanjima persuazije putem serija. To su: percipirani realizam, identifikacija, emocionalna uključenost, evaluacija priče i zainteresiranost (do sada slabije istraživana). U Hrvatskoj smo proveli kvantitativno anketno istraživanje metodom grude snijega. Kao stimulus poslužila nam je serija „Novine“. Od ukupno 522 ispitanika, 309 ispitanika je gledalo „Novine“ i sudjelovalo u glavnom istraživanju persuazivnih čimbenika. Ostale smo sudionike, u cilju pomoćnog istraživanja, ispitivali o razlozima negledanja serije. Rezultati glavnog istraživanja pokazuju izraženost svih persuazivnih čimbenika te snažne i umjerene pozitivne povezanosti među njima. Time ukazuju na visoko izražen persuazivni potencijal političkih serija „kvalitetne televizije“. Istraživanje je proširilo ranije uvide o istaknutosti i povezanosti elementa zainteresiranosti za priču i elementa pozitivne evaluacije priče. Interes za priču i njezina evaluacija snažno su međusobno pozitivno povezani i duboko afektivne prirode. Rezultati sugeriraju i da su gledateljeva zainteresiranost za priču i pozitivan dojam o njoj usko pozitivno povezani s drugim persuazivnim čimbenicima. Vezano za njihovu povezanost s percipiranim realizmom priče, uočena je nešto slabija povezanost s vanjskim nego s unutarnjim realizmom. Narativne strategije i dramaturška snaga same serije stoga će biti od nešto veće važnosti za njihovo osnaživanje, nego li prepoznavanje činjenične vanjske sličnosti sa stvarnim svijetom. Manje od polovice ispitanika „Novine“ je pratilo isključivo tijekom emitiranja na linearnoj televiziji. To sugerira da rejtinzi linearnih emitiranja ne odražavaju masovnost prijema serije u Hrvatskoj., Within narrative persuasion theory, audience research seeks to establish which factors, derived from certain elements of a fictional story, strengthen the potential influence of that story on beliefs, attitudes, or behaviours (its ‘persuasive potential’). Quality TV political series are becoming an increasingly important co-creator of political culture. Therefore, we intended to examine the persuasive potential of this type of TV series within the narrative persuasion theory. The research aimed to analyse the prominence and correlation of five persuasive factors that have not been observed together in TV series persuasion research yet. These factors are perceived realism, identification, emotional involvement, story evaluation, and interest (less researched thus far). We conducted a quantitative survey based on snowball sampling in Croatia. The stimulus was the TV series The Paper. Out of 522 respondents, 309 respondents watched The Paper and participated in the main study of persuasive factors. For additional study, we asked other participants about their reasons for not watching the series. The results of the main study suggest the prominence of all persuasive factors as well as strong and moderate positive correlations between them. They thus point to the highly pronounced persuasive potential of Quality TV political series. The research expanded earlier insights on the prominence and correlations of the interest factor and positive evaluation factor. Interest and evaluation are exceptionally mutually positively correlated and deeply affective. Furthermore, the results suggest that the viewers’ interest and positive evaluation of the story are closely and positively correlated to other persuasive elements. Regarding correlations of the factors with the story’s perceived realism, the correlations with external realism are weaker than those with internal realism. Therefore, the series’ narrative strategies and inner strength will be somewhat more important for their empowerment than recognising the factual similarity with the outside world. Less than half of the respondents watched The Paper weekly on linear TV, which suggests that linear TV ratings do not reflect the total reception of The Paper in Croatia.

Osnivanje Komunističke partije Jugoslavije i začeci komunističke ideologije na jugoslavenskim prostorima mogu se pripisati utjecajima Oktobarske revolucije i pojedincima koji su širili komunističke ideje. Budući da je KPJ djelovala u dvije faze, legalnoj i ilegalnoj, u ovom radu obrađuju se obje s posebnim naglaskom na ilegalnoj koja je bila dugotrajnija. Sintezom relevantne znanstvene literature i korištenjem lista Proleter kao povijesnog izvora, rad istražuje ilegalno djelovanje KPJ u međuraću s naglaskom na razdoblje izlaženja ovog glasila. Rad kroz poglavlja tematski donosi okolnosti koje su utjecale na razvoj KPJ, pregled političkih i društvenih promjena u Europi 1930-ih, rastućeg fašizma, Velike čistke, konflikata koji su vodili u novi veliki rat. Evolucija KPJ u međuratnom razdoblju uzrokovana je njezinom adaptacijom na novonastale promjene koje se događaju unutar partije i države, ali i u svijetu i Kominterni koja rukovodi glavnim odrednicama njezine ideološke borbe. The founding of the Communist Party of Yugoslavia and the beginnings of communist ideology in Yugoslavia can be attributed to the influence of the October Revolution and individuals who spread communist ideas. Since the CPY operated in two phases, legal and illegal, this paper deals with both, but with a special emphasis on the illegal phase, which lasted longer. By synthesizing the relevant academic literature and using the paper Proleter as a historical source, the thesis investigates the illegal activities of the CPY in the interwar period with an emphasis on the period of publication of this newspaper. The thesis through the chapters thematically presents the circumstances that influenced the development of the CPY, an overview of political and social changes in Europe in the 1930s, growing fascism, the Great Purge, conflicts that led to a new great war. The evolution of the CPY in the interwar period was caused by its adaptation to the new changes taking place within the party and the state, but also in the world and the Comintern, which controls the main determinants of its ideological struggle.

Predstavnici znanstvenih disciplina, uključujući i sociologe, trebaju biti refleksivni prema svom radu i prema vlastitim istraživačkim aktivnostima. Metodologija, kao jedan od aspekata tih aktivnosti, predstavlja skup pravila o korištenju različitih metoda i tehnika istraživanja. Autor ove disertacije krenuo je od pretpostavke da je moguće identificirati obrasce korištenja različitih metodoloških pristupa u sociologiji te da istraživači trebaju proučavati širi društveni kontekst da bi mogli utemeljeno objasniti pojavljivanje različitih obrazaca korištenja metodoloških pristupa. Slijedom navedenog, da bi se objasnio predmet istraživanja, u ovoj se disertaciji daje pregled teorijskih koncepata iz sociologije znanosti i sociologije znanja te iz refleksivne sociologije. Predmet istraživanja u ovoj disertaciji može se opisati kao proučavanje promjena u metodološkim obilježjima istraživačkih radova u hrvatskoj sociologiji od 60-ih godina prošlog stoljeća pa sve do danas, uključujući i analizu društveno – političkog konteksta u kojem su proučavana obilježja nastajala. Da bi se dobila opširnija slika o istraživanoj problematici, korištene su metode dvaju metodoloških pristupa. Prva metoda predstavljala je kvantitativnu analizu sadržaja istraživanih radova, koja je dala uvid u karakteristike metodoloških obilježja samih radova. U drugoj metodi, korišteni su polu – strukturirani intervjui koji su provedeni na uzorku sociologa, zaposlenih u znanstveno – istraživačkim institucijama. U intervjuima se raspravljalo o društveno – političkom kontekstu u kojem su istraživani radovi objavljeni. Rezultati istraživanja potvrdili su da je došlo do promjena u metodološkim obilježjima radova u promatranom razdoblju, odnosno da je došlo do porasta u kompleksnosti korištene metodologije u hrvatskoj sociologiji te da su opisi te metodologije s vremenom postajali sve detaljniji. U drugom dijelu istraživanja, identificirana su i objašnjena četiri potencijalna faktora pomoću kojih se može opisati društveno – politički kontekst, s naglaskom na 90-e godine prošlog stoljeća. Ti faktori su sljedeći: političke promjene, institucionalne promjene, generacijske promjene i vanjski utjecaji na razvoj sociologije na ovom području. Iako se ne može tvrditi da su identificirani svi elementi na temelju kojih se može jednoznačno objasniti veza između četiriju spomenutih društvenih faktora i promjena u metodologiji, može se dobiti osnovni uvid u njihov odnos, čime se otvara plodonosan prostor za daljnje diskusije i istraživanja na temu ove disertacije. It can be considered important that members of scientific disciplines, including sociologists, have a reflection on their work and their research activities. Methodology as one aspect of these activities is a set of rules on the use of different research methods and techniques. The author of this dissertation started from the assumption that it is possible to identify patterns of use of different methodological approaches in sociology and that some broader context is needed to explain their occurrence. Regarding the theoretical framework of this dissertation, concepts from the sociology of science and knowledge and concepts from social theory about reflexivity were used to explain the research subject. Theoretical concepts from the sociology of knowledge and the sociology of science were used to explain and define the research subject in this dissertation. Also, concepts from these disciplines were used to explain what it means for a sociological community to have a scientific tradition that depends on the broader social context that needs to be explained. As for the concepts from the sociological theory of reflexivity, they were used to explain why it was important to conduct the research about the topic from this dissertation and which factors needed to be taken into account when explaining it. The main subject of this dissertation can be described as observing the changes in the methodological characteristics of research papers in Croatian sociology from the 1960s to the present time. Another subject of this dissertation was to explain the connection between the observed changes in the methodology of the analyzed research papers and the socio – political context in which these changes took place. To obtain a broader picture of the investigated problem, methods from two methodological approaches were used. The first method was a quantitative analysis of the content of the observed scientific papers and on this basis, an insight into the characteristics of the methodological characteristics of these papers was obtained. A total of 2526 papers were analyzed, of which 702 were estimated to be primarily sociological papers. For the second method, semi – structured interviews were conducted with a group of sociologists employed by research institutions. A total of 17 participants from 8 different scientific research institutions positioned in Zagreb, Osijek, and Zadar participated in the interviews. The discussion in the interviews was about the socio – political context in which the analysed papers were published. Specifically, five thematic blocks were represented in the interviews: (1) the state of sociology during the observed period; (2) the socio – political context during the 1990s, which could have influenced the development of sociology; (3) discussion about the results obtained in this dissertation; (4) discussion about the implications of the results; (5) and discussion about the guidelines for the future development of sociology. The research confirmed that there were changes in the methodological features of the papers. In the observed period, there was an increase in the complexity of the methodology used in Croatian sociology. Also, the descriptions of the used methodology were becoming more detailed. This means that in the observed period, more and more different methodological approaches and statistical tests began to be used. Both quantitative and qualitative solutions to research problems began to be part of the methodology used in the papers. Also, the authors of the research papers have progressed from the use of primarily descriptive statistics on their data and began to use different tests from the corpus of bivariate and multivariate statistics. Regarding the progress on the detail of the methodological descriptions, the authors of the research papers began to provide more and more new pieces of information about the procedures they used in their research. Based on this finding, the first hypothesis from this dissertation was confirmed. In the second part of the research, four potential factors that can serve to describe the socio – political context were identified and explained. These factors are political changes as the main factor; institutional changes; generational changes; and international influences on the development of sociology in this area. Based on the results it can be concluded that identified socio – political factors may have had an impact on the increased number of research papers and the greater thematic diversity of these papers during the observed period. Also, it is necessary to conclude that no completely clear link was found between these factors and the development of more complex methodologies in the observed papers. These results only partially support the second hypothesis. It can be considered that all the results from this dissertation represent a fruitful space for further research and discussions on this or similar topics.

„Spol“ i „rod“ se još uvijek doživljavaju kao sinonimi, no među njima postoje jasne distinkcije, pa tako za razliku od spola koji se odnosi na biološke karakteristike s kojima se rodimo, rod predstavlja društvene, kulturološke i povijesne razlike te uloge i očekivanja koje društvo pripisuje ženama i muškarcima. Jedna od najzanimljivijih tema za sociologiju je rodna nejednakost, a proučavajući ovu relaciju povijesno, uviđa se kako su muškarci i žene oduvijek bili nejednaki i to na štetu žena, kojima je uz podređeni položaj bila namijenjena i privatna sfera te briga o djeci i kućanstvu. Iako se može reći da smo još uvijek društvo s patrijarhalnim vrijednostima, Hrvatska je svoje putovanje prema društvu jednakosti započela paralelno s početkom pregovora za ulazak u Europsku uniju, donoseći razne zakone o ravnopravnosti spolova i suzbijanju diskriminacije, ali i osnivanjem Ureda za ravnopravnost spolova Vlade RH i Pravobranitelj/ice za ravnopravnost spolova. Pomoću istraživačkih metoda bibliometrijske analize i analize sadržaja razmatra se zastupljenost članaka unutar znanstvenih časopisa u odnosu na godine objavljivanja, ali i istražuju se tematska područja, u odnosu na područja kojima se bavi sociologija spola i roda. Ukupno je analizirano 93 članka ili 4% svih objavljenih radova u vremenskom razdoblju od dva desetljeća izdavaštva, tj. od 2001.-2021. godine. Analizom sadržaja je uočen jako mali broj radova usmjerenih k teorijskim definicijama spola i roda te pitanju reprodukcije, dok se najčešće piše o temama koje se vežu uz tržište rada, majčinstvo, očinstvo i rad u kući, zatim pitanja seksualnosti, transrodnosti i queer identiteta te feminizma, feminističke kritike znanosti i postmodernizma, "Sex" and "gender" are still perceived as synonyms, but there are clear distinctions between them, so unlike gender, which refers to the biological characteristics we are born with, gender represents social, cultural and historical differences and roles and expectations which society assigns to women and men. One of the most interesting topics for sociology is gender inequality, by analyzing this historical relationship, it is understood that men and women have always been unequal, against women to whom in addition to their subordinate position, were also assigned the private sphere and the care of children and the household. Although we can say that we are still a society with patriarchal values, Croatia began its journey towards social equality in parallel with the beginning of negotiations for entry into the European union, passing various laws on gender equality and combating discrimination, as well as establishing the Office for Gender Equality of the Government of the Republic of Croatia and Ombudsperson for gender equality. Using the research methods of bibliometric analysis and content analysis, the representation of articles in scientific journals is considered in relation to the year of publication, but thematic areas are also investigated, in relation to the areas dealt with in the sociology of sex and gender. A total of 93 articles or 4% of all published works were analyzed in the time period of two decades of publishing, i.e. from 2001.-2021. years. The analysis of the content revealed a very small number of works focused on theoretical definitions of sex and gender and the issue of reproduction, while most often it is written about topics related to the labor market, motherhood, fatherhood and work at home, then issues of sexuality, transgender and queer identity, and feminism, feminist critiques of science and postmodernism

Pravilna prehrana je veoma važna za zdravlje, kod narušenog zdravstvenog stanja je još važnija jer utječe na tijek bolesti i sam ishod iste. Hranjenje spada u 14 osnovnih ljudskih potreba, te je uloga medicinske sestre vrlo bitna kako bi pružila određenu vrstu i količinu pomoći da bi osnovna ljudska potreba bila zadovoljena. Gastrično hranjenje spada u najčešći oblik enteralnog hranjenja. Enteralno hranjenje je važno u stanjima kada je gastrointestinalni trakt očuvan i u funkciji jer apliciranjem hrane doprinosimo boljoj apsorpciji svih važnih nutrijenata. Indicirano je kod pacijenata koji duže od 4 tjedna nisu u mogućnosti uzimati hranu peroralnim putem. Perkutana endoskopska gastrostoma je sigurniji je oblik hranjenja, jeftiniji i ekonomičniji. Ne zahtjeva kirurško zbrinjavanje, manje je invazivna metoda te nema potrebe za općom anestezijom čime se smanjuje rizik od neželjenih komplikacija. Za razliku od nazoenteričnih sondi (nazogastrična sonda, nazoduodenalna i nazojejunalna) koje se obično postavljaju kod kratkotrajnog enteralnog hranjenja u pacijenata kod kojih su očuvani refleksi dišnih puteva, perkutana ednoskopska gastrostoma se postavlja kod pacijenata koji pate od umjerene do teške malnutricije. Prije samog postavljanja PEG sonde i primjene enteralne prehrane potreban je multidisciplinirani pristup, njega sačivanjavaju tim gastroenterologa-endoskopičara koji su odgovorni za postavljanje gastrostome, medicinske sestre, nutricionisti te članovi obitelji. U nekim slučajevima od velike koristi mogu biti i tim psihologa. Cilj postavljanja gastrostome je da se pacijentu osigura nutritivna vrijednost te samim time smanji stopa mortaliteta i rizik nastanka neželjenih komplikacija., Proper nutrition is very important for health, it is even more important in case of impaired health because it affects the course of the disease and its outcome. Feeding is one of the 14 basic human needs, and the role of the nurse is very important in order to provide a certain type and amount of help to satisfy the basic human need. Gastric feeding is the most common form of enteral feeding. Enteral feeding is important in conditions when the gastrointestinal tract is preserved and functioning, because by applying food we contribute to a better absorption of all important nutrients. It is indicated for patients who are unable to take food orally for longer than 4 weeks. Percutaneous endoscopic gastrostomy is a safer, cheaper and more economical form of feeding. It does not require surgical treatment, it is a less invasive method and there is no need for general anesthesia, which reduces the risk of unwanted complications. Unlike nasoenteric tubes (nasogastric tube, nasoduodenal and nasojejunal), which are usually placed during short-term enteral feeding in patients with preserved airway reflexes, percutaneous endoscopic gastrostomy is placed in patients suffering from moderate to severe malnutrition. Before the placement of the PEG tube and the application of enteral nutrition, a multidisciplinary approach is required, which is maintained by a team of gastroenterologists-endoscopists who are responsible for the placement of the gastrostomy, nurses, nutritionists and family members. In some cases, a team of psychologists can be very useful. The goal of placing a gastrostomy is to provide the patient with nutritional value and thereby reduce the mortality rate and the risk of unwanted complications. percutaneous endoscopic gastrostomy, enteral feeding, nurse, nutrition

Uvod: Ozljede muskulature stražnje natkoljenične lože predstavljaju najčešću muskulaturnu ozljedu u profesionalnom nogometu, a njihov se nastanak najčešće povezuje sa trčanjem pri visokim brzinama kao motoričkim zadatkom koji čini esenciju nogometne igre, ali i uspjeha u nogometnoj igri s obzirom na to da je dokumentirano da se najveći broj golova upravo postižu iz situacija koje dominantno uključuju linearan sprint. S obzirom na veliku incidenciju ozljeda prilikom trčanja visokim brzinama, ali i veliku važnost repetitivnog svladavanja ovog motoričkog zadatka za vrijeme nogometne igre potrebno je voditi adekvatnu dokumentaciju kako bi se na pravi način moglo pristupiti ovom, sve učestalijem problemu. Adekvatna dokumentacija i prepoznavanje rastućih trendova muskulaturnih ozljeda općenito, a posebno muskulature stražnje natkoljenične lože predstavlja tek prvi korak u prevenciji ovakvih ozljeda, povećanju dostupnosti igrača i u povećanju uspješnosti cijele momčadi. Materijali i metode: Istraživanje je provedeno na seniorskoj i razvojnoj momčadi elitnog nogometnog kluba u Aziji. Unutar jedne natjecateljske sezone su, uz pomoć interne klupske tablice, dokumentirane su sve ozljede obje momčadi koje su uzrokovale izbivanje s terena od minimalno tri dana. Momčadi su se razlikovale u broju ispitanika, dobi, broju natjecanja u kojem participiraju te u izlaganju u natjecateljskim utakmicama. Cilj je istraživanja bio provjeriti unutar koje će se momčadi razviti veći broj muskularnih ozljeda, da li će u ukupnome broju dominirati ozljede muskulature stražnje natkoljenične lože, te u kojoj će ih se momčadi razviti veći broj. Rezultati: Za vrijeme natjecateljske sezone 2020./2021. su unutar prve momčadi dokumentirane 63 ozljede u odnosu na 33 koje su dokumentirane u onoj razvojnoj unatoč većem broju igrača koji su participirali u utakmicama razvojne momčadi. Ozljede muskulature stražnje natkoljenične lože nisu dominirale među četiri najčešće ozljeđivanje mišićne skupine donjih ekstremiteta kako je bilo očekivano s obzirom na prethodne, doduše višegodišnje, studije koje su dokumentirale ozljede profesionalnih nogometaša u elitnim klubovima Europe. Veći je broj ozljeda muskulature stražnje natkoljenične lože dokumentiran unutar prve momčadi što je bilo očekivano s obzirom na zahtjeve u smislu broja natjecanja i broja utakmica koji su na početku sezone stajali pred prvom, odnosno, seniorskom momčadi, ali i isprepletanja drugih čimbenika rizika. Zaključak: S obzirom na relativno mali istraživački uzorak ne mogu se donijeti nikakvi čvrsti zaključi na temelju provedenog istraživanja. Svakako bi trebalo razmotriti daljnje praćenje ove dvije momčadi kako bi se potencijalno mogli utvrditi svojevrsni trendovi, ili bi se trebali uključiti klubovi koji također participiraju unutar istih natjecanja kako bi studija dobila na relevantnosti, ali i kako bi se mogle povući paralele i donijeti zaključci slični onima na Europskoj razini., Background: The injuries to the hamstrings represent the most common muscle injuries in professional football and they happen due to the high speed running which is the essential motoric task in the football play. Subsequently, these high speed running acts are responsible for success during the game, or simply said the score. It is documented that the higest number of goals are scored precisely during situations where dominantly linear sprints are incorporated. Due to the high incidence of injuries during high speed running and massive importance of repetitiveness of this motor task during the football game, it is necessary to adequately document these injuries in order to establish the most effective approach to this more and more emerging problem. The right documentation and recognition of growing trends in muscle injuries in general, and of the hamstring muscle group injuries specifically, represents the first step in prevention of this class of injuries, improves availability of players and enhances the success rates of the entire team. Methods: The study was conducted in players of senior and developing (junior) team in an elite football club in Asia. In one competitive season, with the use of internal club database, there were documented all injuries of both teams that caused the player absence longer than three consecutive days. The teams varied in the number of subjects, age, number of contests they participate in and exposure in competitive matches. The aim of this research was proving which team would develop more muscle injuries, would the most of these injuries be the hamstring injuries and which of the teams would suffer from the highest number of the injuries in the forementioned hamstrings. Results: During the season of 2020/2021, there were 63 injuries in the first team, whereas in the second team only 33, in spite of the greater number of players of the second team participating in the matches. The hamstring muscle injuries did not dominate in the group of four most common muscle injuries of the lower extremities as it was anticipated considering the long term studies that were previously conducted in the elite football clubs across Europe. The greater number of muscular injuries to the hamstrings has been documented inside the first team, which was expected due to the bigger demands in terms of the number of leagues and the number of matches played per team, entangled with the risk factors of the senior group, opposed to the developing one. Conclusion: Based on the small sample of subjects in the conducted research, I cannot derive a firm conclusion. More documentation and following of this pair of subject groups should be considered in order to potentially identify the trends regarding muscle injuries to the hamstrings. On the other side, to give the relevance to the study, more elite football clubs that participate in the same leagues and competitions should be included in the future studies, but also to draw a parallel and derive similar conclusions regarding the European clubs of same level.

Poziv na suradnju u A1 časopisu – Croatica et Slavica Iadertina / 225–226 • Poziv na objavljivanje radova u tematskom broju časopisa Croatica et Slavica Iadertina pod naslovom Tijelo, identitet i emocije u hrvatskom i slavensim jezicima, književnostima i kulturama / 227–228 • Call for papers in the thematic Issue of Journal Croatica et Slavica Iadertina entitled Body, Identity and Emotions in Croatian and Slavic Languages, Literatures and Cultures / 229–231

Tradicija zapisivanja ljudskog znanja seže u daleku povijest. Prije papira neki od glavnih materijala za zapisivanje ljudskog znanja bili su kamen, drvo, papirus, pergamena i sl., koji su korišteni kod starih civilizacija poput Sumerana i Egipćana. Izumom papira u Kini u 2. st. prije Krista i njegovim dolaskom u Europu preko Arapa nekoliko stoljeća poslije mijenja se način zapisivanja znanja, a veliku je ulogu papir odigrao i u povijesti tiskarstva. Jedni od prvih mlinova u Europi razvili su se u Italiji koja je zbog toga bila jedan od najvećih izvoznika papira i njime opskrbljivala velik dio Europe (posebno je poznat po kvalitetnom papiru bio grad Fabriano koji se ističe i vodenim znakovima (filigranima) koje utiskuje u svoj papir). U Hrvatskoj se proizvodnja papira razvija krajem 17. i u 18. stoljeću. Danas se upotrebljavaju raznolike vrste papira, i, iako je digitalno doba u punom zamahu, papir i dalje ostaje glavni materijal za zapisivanje znanja i medij za razmjenu informacija. Tradition of writing down human knowledge has a long history. Before paper some of the most used writing materials were stone, wood, papyrus, parchment etc., which were used by the ancient civilizations such as Sumerians and Egyptians. Discovery of paper in China in 2nd century B.C and its arrival in Europe via Arabsa few centuries later changed the way of writing human knowledge, and paper played a significant role in the history of printing. Some of the first paper mills in Europe developed in Italy, and because of that Italy was the greatest exporter of paper for the needs of whole Europe (the city of Fabriano was especially known for its excellent quality paper with watermarks that were pressed into paper). The production of paper in Croatia starts in 17th and 18th century. Many different kinds of paper are in use today and, even if the digital era is in full swing, paper still stays the most important writing material and medium for knowledge exchange.

Danas sport doseže sasvim nove granice pa nogometaš osim talenta mora imati i druge sposobnosti kako bi mogao uspjeti u profesionalnom nogometu. Vrlo važan čimbenik u samoj pripremi nogometaša je programiranje tempa kretanja koji omogućuje nogometašu da u određenom trenutku bude izdržljiv, brz i agilan. Izdržljivost, brzina i snaga nužne su i bitne osobine jednog nogometaša. Cilj rada je predočiti važnost programiranja tempa, odnosno uvježbavanje brzinske i specijalne izdržljivosti nogometaša. Today, the sport reaches completely new limits, so a football player must have other abilities in addition to talent in order to succeed in professional football. A very important factor in the preparation of a footballer is the programming of the pace of movement that allows the footballer to be durable, fast and agile at a given moment. Endurance, speed and strength are necessary and essential characteristics of a footballer. The aim of this paper is to present the importance of tempo programming, training the speed and special endurance of football players.

Recikliranje (oporaba) je postupak kojim se omogućava ponovna uporaba otpada u proizvodnom procesu. Obuhvaća preradu već korištenih materijala u nove proizvode pa se na taj način potencijalno korisni materijali ne bacaju, već se koriste u novoj proizvodnji. Recikliranje se temelji na relativno jednostavnom načelu: otpad treba promatrati kao sirovinu, čime se istovremeno smanjuje potreba za novim prirodnim dobrima, kao i količina otpadne tvari koju treba negdje odložiti. Zaštita okoliša skup je aktivnosti i mjera za sprečavanje opasnosti za okoliš, nastanka šteta i/ili onečišćivanja okoliša, smanjivanja i/ili otklanjanja šteta nanesenih okolišu te povrata okoliša u stanje prije nastanka štete. Svojim završnim radom pokušala sam djeci predočiti probleme vezane uz okoliš kojih oni još nisu svjesni. Kroz provedene aktivnosti nastojala sam im pokazati postupak recikliranja papira i način na koji se dobiva novi papir bez zagađivanja okoliša. Ispitivanje sam provela na uzorku od 5 djece i 5 njihovih roditelja. Djeca su iz srednje odgojne skupine DV „Jelenko“ u Osijeku. U radu s djecom uvjerila sam se da djeca imaju neka znanja o otpadu, a ja sam ih dodatno uputila u važnost recikliranja otpada. Potom sam putem komunikacije s djecom i dodatnom aktivnošću pokazala kako oni sami mogu doprinijeti očuvanju okoliša. Smatram bitnim navesti da se djeca u vrtiću već u toj dobi trebaju upoznavati s tematikom otpada jer se odmalena uče dobrim navikama kao što je tako postupanje s otpadom, odnosno papirom. Recycling is a process that allows the reuse of waste in the production process. It includes the processing of used materials into new products, so that potentially useful materials are not thrown away, but are used in new production. Recycling is based on a relatively simple principle: waste should be observed as a raw material, which at the same time reduces the need for the use of new natural resources, as well as the amount of waste that needs to be disposed of somewhere. Environmental protection is a set of activities and measures for the prevention of environmental hazards, the occurrence of damage and / or environmental pollution, the reduction and / or elimination of damage to the environment and the return of the environment to the state before the damage occurred. With my final thesis, my aim was to present to the children environmental problems of which they are not yet aware. Through implemented activities I tried to show them the process of paper recycling and how to get new paper without polluting the environment. I conducted the study on a sample of five children as well as their parents. The children are from the middle educational group in Kindergarten "Jelenko" in Osijek. While working with the children, I was convinced that children do have some knowledge regarding waste, and I additionally instructed them regarding the importance of recycling waste. Then, through communication and additional activity with the children, I showed them how they themselves can contribute to the preservation of the environment. I think it is important to state that children in kindergarten should be introduced to the topic of waste at this age, because they acquire good habits from an early age, and therefore learn how to deal with waste as well as paper waste.

Superkondenzatori se ističu velikom specifičnom snagom koju mogu isporučiti što im daje prednost pred ostalim elektrokemijskim spremnicima i pretvornicima energije. Glavni nedostatak im je mala količina energije koja se može uskladištiti u usporedbi s galvanskim člancima. S druge strane, galvanski članci pak posjeduju malu specifičnu snagu. Iz tog razloga pažnju privlače hibridni superkondenzatori, odnosno asimetrični superkondenzatori gdje je jedna elektroda napravljena od materijala s kapacitivnim ponašanjem odnosno grafena, a druga od materijala kod kojeg se odvija faradejska reakcija odnosno od cinka. U ovom radu provedena je priprema grafenskog papira koji je korišten u izradi dva hibridna superkondenzatora: Zn pločica/rGO papir hibridni superkondenzator te rGO papir-Zn/rGO papir hibridni superkondenzator. rGO papir je okarakteriziran XRD metodom, FTIR spektroskopijom te je ispitana njegova električna provodnost. Pri tome je dokazano da je uspješno provedena elektrokemijska redukcija GO. Metode kojima su ispitane karakteristike hibridnih superkondenzatora su ciklička voltametrija (CV), elektrokemijska impedancijska spektroskopija (EIS) te kronopotenciometrija (CP). Kod oba superkondenzatora su dobiveni strujni vrhovi koji pokazuju da dolazi do taloženja/otapanja cinka. Zn pločica/rGO papir hibridni superkondenzator pokazao je specifični kapacitet od 44,48 F/g pri struji od 0,36 A/g, specifičnu energiju od 12,11 Wh/kg i specifičnu snagu od 1,26 kW/kg, dok je kod rGO papir- Zn/rGO papir hibridnog superkondenzatora zabilježen specifični kapacitet od 47,83 F/g pri struji od 0,83 A/g, specifična energija od 13,02 Wh/kg te specifična snaga od 10,13 kW/kg. Supercapacitors are characterised by high power density that is an advantage of supercapacitors over the batteries. The main disadvantage of supercapacitors is the small amount of energy that can be stored. For this reason, hybrid supercapacitors attract significant attention. Hybrid supercapacitors contain one electrode made of a capacitive material such as graphene, and the other electrode made of a material in which faradaic reaction takes place such as Zn. In this work, the graphene paper was used in order to assemble two hybrid supercapacitors: Zn plate/rGO paper hybrid supercapacitor and rGO paper-Zn/rGO paper hybrid supercapacitor. rGO paper was characterized by XRD method, FTIR spectroscopy and its electrical conductivity was determined. It was proven that the electrochemical reduction of GO was successfully carried out. Methods used to examine the characteristics of hybrid supercapacitors were cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronopotentiometry (CP). For both supercapacitors were obtained characteristic current peaks, which indicate that zinc deposition/dissolution takes place. Zn plate/rGO paper hybrid supercapacitor showed specific capacitance of 44.48 F/g at the constant current of 0.36 A/g, specific energy of 12.11 Wh/kg and specific power of 1.26 kW/kg, while rGO paper- Zn/rGO paper hybrid supercapacitor showed specific capacitance of 47.83 F/g at the constant current of 0.83 A/g, specific energy of 13.02 Wh/kg and specific power of 10.13 kW/kg.

U radu je izvedena analiza tokova vode u različitim postrojenjima za proizvodnju celuloze, papira i kartona. Utvrđeno je da ova postrojenja imaju iznimno veliku potrošnju vode, čak i do 40 000 m 3 na dan uz iznimno visoka opterećenja suspendiranim tvarima (do 5 000 mg/dm 3 ), KPK vrijednosti (do 2 000 mg/dm 3 ) i BPK 5 vrijednosti (do 700 mg/dm 3 ). Obrada ovakvih voda je nužna prije ispusta u sustav javne odvodnje, a posebice prilikom ispusta u površinske vode. Primjenom procesa pročišćavanja primarnim taloženjem, koagulacijom, flokulacijom, flotacijom i sekundarnom obradom moguće je ovakve vode pročistiti do zakonom propisanih vrijednosti. Značajno manja količina vode se koristi u proizvodnji kartona što ukazuje na potrebu prikupljanja i recikliranja otpadnog papira, čime se znatno smanjuje upotreba svježe vode, korištenje kemikalija i osigurava zaštita okoliša. Analizom rezultata kakvoće obrađene otpadne vode tvornice kartona utvrđeno je da dobivene vrijednosti prelaze one propisane zakonom. Pokazatelji kakvoće otpadne vode iz tvornice celuloze i papira pokazuju da se ovakve vode mogu ispustiti u sustav javne odvodnje. The analysis of the water streams in different plants for cellulose, paper and cardboard production has been examined. These plants have extremely high water consumption, even up to 40 000 m 3 per day with extremely high loads of suspended solids (up to 5 000 mg/dm 3 ), COD values (up to 2 000 mg/dm 3 ) and BOD 5 values (up to 700 mg/dm 3 ). The wastewater treatment of these streams is obligatory before their discharge into the sewage systems, particularly in case of discharge into the surface water streams. Treatments with the primary sedimentation, coagulation, flocculation, flotation and secondary treatment, are suitable for achieving parameters subscribed by law. Significantly less water consumption is needed in the cardboard production, which indicates the need for collecting and recycling paper waste which would significantly reduce the use of fresh water and chemicals, as well as ensure environmental protection. The analysis of the quality of treated wastewater from cardboard production shows that the obtained values exceed those prescribed by the law. Indicators of the quality of wastewater from cellulose and paper production show that such water can be discharged into the public sewage system.

U ovom radu govori se o važnosti i prednostima otvorenog pristupa informacijama te su analizirani brojčani podaci o pohranjenim završnim radovima u digitalnim repozitorijima hrvatskih veleučilišta na Nacionalnom repozitoriju završnih i diplomskih radova ZIR. Svrha analize jest utvrditi koliko je otvoreni pristup takvim radovima zastupljen na veleučilištima te koja vrsta pristupa je najzastupljenija., In this paper, focus is on importance and advantages of open access to informations. Also, analysis of number and type of access to final papers in polytechnics digital repositories on National repository ZIR is made, with intention to determine in what amount open access is present in those digital repositories and which type of access to papers is the most used.

Jedna od najvećih zbirki Hrvatskoga školskog muzeja jest Zbirka radova učenika i nastavnika, koja danas ima preko 10 000 muzejskih predmeta. Važan dio Zbirke čini likovno stvaralaštvo naših učenika, učitelja i profesora. Prikupljeni likovni radovi najvećim su dijelom rezultat sustvaranja javnosti, učenika, učitelja, škola i djelatnika Muzeja. Još od svojega osnutka 1901. Hrvatski školski muzej sistematično i planski prikuplja građu bilo da je riječ o donacijama građana, ustanova ili raznim aktivnostima Muzeja, primjerice organiziranju likovnih natječaja na važne i popularne teme, ciljanim izložbama ili dobro osmišljenim pedagoškim akcijama. Muzej motivira svoje posjetitelje, korisnike i cjelokupnu javnost da pomognu sačuvati svakodnevicu, trenutak u kojem se živi i stvara, za buduće naraštaje. Što je rezultat takva pristupa, što se njime uspjelo prikupiti i sačuvati, prikazat će se ovim radom., One of the largest collections of the Croatian School Museum is the Collected Students’ and Teachers’ Papers, which now includes over 10 000 museum items. Artistic creations of our students, teachers and professors are an important part of the collection. Works of visual art were mostly collected through the joint efforts of the public, students, teachers, schools and Museum employees. Ever since it was established in 1901, the Croatian School Museum has systematically and dedicatedly collected different materials, including donations received from individuals and institutions, and pursued various activities, for example the organization of art contests addressing important and popular topics, dedicated exhibitions, and well-designed educational campaigns. The Museum motivates its visitors, users and the entire public to help preserve this daily life, the moment of living and creating, for future generations. This paper will present the result of such approach and what it helped collect and preserve.

Osnovni cilj istraživanja je utvrditi postoji li značajna povezanost između sociodemografskih obilježja obitelji i maloljetnika i recidivizma u izvršavanju kaznenih djela kod maloljetnika. Istraživanjem su obuhvaćeni maloljetni delinkventi – izvršitelji kaznenih djela bez obzira na vrstu kaznenog djela i vrstu izrečenih zakonskih sankcija. U okviru ovog istraživanja obrađeni su podaci koji se odnose na ukupno 161 delinkventa. Prvu skupinu varijabli čine opći podaci o ispitanicima. Drugu skupinu varijable koje su povezane sa sociodemografskim obilježjima obitelji. Treću skupinu varijabli čine one koje se odnose na intenzitet delinkventne aktivnosti maloljetnika. Četvrtu skupinu čine one koje su povezane s poremećajima u ponašanju maloljetnih delinkvenata. Petu skupinu varijabli čine one koje se odnose na školovanje maloljetnika. Među varijablama za koje je u ovom istraživanju utvrđeno da su statistički značajno povezane s recidivizmom nalaze se mlađa životna dob, redoslijed rođenja, maloljetnici čiji roditelji imaju niže obrazovanje, oni čiji otac radi na slabije plaćenim poslovima, agresivno ponašanje maloljetnika, bježanje iz škole, neki oblici ovisnosti (snifanje i tabletomanija), učestalo mijenjanje školske sredine i ponavljanje razreda. Redoslijed rođenja četiri puta povećava šansu za pojavu recidivizma, a najveći doprinos mogućoj pojavi recidivizma ima promjena škole jer ta varijabla povećava šansu recidivizma čak 7, 3 puta. Protektivnu vrijednost u odnosu na recidivizam pokazale su varijable starija životna dob, uspjeh u školi i viša školska sprema roditelja

U ovom radu opisani su glavni elementi elektroenergetskog postrojenja. Nabrojane su izvedbe, principi rada, prednosti i mane pojedinih elemenata i materijali od kojih se izrađuju. Sve je dijelove potrebno pravilno dimenzionirati za predviđena opterećenja. Osim dijelova postrojenja, teorijski su opisani tokovi snaga. Proizvodnja u sustavu mora u svakom trenutku biti jednaka potražnji potrošača. Potrošnja se može prikazati dijagramima opterećenja. Razlikuju se dnevni, tjedni, sezonski i godišnji dijagrami opterećenja. Kao zaključni dio rada objašnjeno je postrojenje 110/6,3 kV tvrtke DS Smith u Belišću. Prikazana je krivulja proizvodnje generatora u slučaju iznenadnog prestanka rada papir stroja. This paper describes the main elements of a power plant. Performances, principles of work, advantages and disadvantages of individual elements and materials from which they are made are listed. All parts must be properly dimensioned for the intended loads. In addition to plant parts, power flows are theoretically described. Production in the system must always be equal to consumer demand. Consumption can be shown by load diagrams. There are daily, weekly, seasonal and annual load diagrams. As a concluding part of the paper, the 110/6.3 kV plant of DS Smith in Belišće was explained. The generator production curve in the event of a sudden paper machine shutdown is shown.

U teorijskom dijelu završnog rada sažeto je opisana toplinska obrada metalnih materijala i navedena podjela postupaka toplinske obrade. Predstavljen je postupak poboljšavanja čelika, izbor temperature austenitizacije, metode gašenja, temperature popuštanja te način provedbe pojedinih faza. Objašnjen je utjecaj parametara toplinske obrade na svojstva čelika te pojam kaljivost i zakaljivost čelika. Sažeto su predstavljeni nelegirani i legirani čelici za poboljšavanje, njihov kemijski sastav, svojstva i primjena. U praktičnom dijelu rada predstavljen je niskolegirani čelik za poboljšavanje 42CrMo4. Opisane su sve faze toplinske obrade poboljšavanja monoblok kotača. Također je opisano ispitivanje, In the theoretical part of the final paper, the heat treatment of metallic materials is briefly described and the division of heat treatment processes is stated. The process of hardening and tempering, selection of austenitization temperature, quenching methods, tempering temperature and the method of implementation of individual phases are presented. The influence of heat treatment parameters on the properties of steel and the terms hardenability and potential hardness increase of steel are explained. Non-alloy and alloy steels for hardening and tempering, their chemical composition, properties and application are briefly presented. In the practical part of the paper, low-alloy steel 42CrMo4 for hardening and tempering is presented. All phases of hardening and tempering of monoblock wheel are described. Hardness testing after hardening and after tempering is also described.

U ovom radu autor se bavi analizom mađarizacijskog sadržaja lista „Muraköz – Medjimurje“ u razdoblju od 1884. do 1914. godine. Cilj takvog postupka istraživanje je na koje su sve načine mađarizacijski krugovi pokušavali putem novinskog sadržaja utjecati na nacionalni identitet međimurskog stanovništva, odnosno je li i kako je pojava hrvatskih preporoditelja utjecala na povećanje intenziteta provođene mađarizacije. U tu svrhu, nakon predstavljanja samoga lista i njegovog uredništva, napravljena je osnovna podjela na njegov sadržaj koji su novine samo prenosile i sadržaj koji su samostalno kreirale, odnosno na 'unutarnju' i 'vanjsku' mađarizaciju. Osim samim mađarskim i „međimurskim“ jezikom, rad se stoga bavi i uporabom povijesti u identitetske svrhe, proslavama nacionalnih praznika i važnih ličnosti iz mađarske nacionalne povijesti te agitiranjem i inicijativama u svrhu usađivanja mađarstva u međimurski javni prostor. Naposljetku, u posljednjem dijelu rada osvrt je pružen na sukob uredništva lista s predstavnicima hrvatskoga nacionalnog pokreta u Međimurju. In this thesis, the author analyzes the Magyarization content of the paper „Muraköz – Medjimurje“ in the period from 1884 to 1914. The aim of such a process is to examine the ways in which Magyarization circles tried to influence the national identity of the population of Međimurje through paper's content; also to examine whether and how the appearance of Croatian national revivalists influenced the increase in the intensity of Magyarization carried out by the paper. To this end, after the presentation of the paper itself and its editorial board, a basic division was made into its content, which the paper only transmitted, and the content its editorial board independently created; also a division into 'inner' and 'outer' Magyarization processes. In addition to the use of the Magyar and „Intermurakian“ languages, this thesis deals with the use of history for identity purposes, celebrations of national holidays and important figures from Hungarian national history, as well as with the agitation and the initiatives to imbed Hungarian content into the public space of Međimurje. Finally, in the last part of the thesis, a review is given of the conflict between the paper's editorial board and representatives of the Croatian national movement in Međimurje.

U završnom radu opisan je utjecaj korozije na svojstva metalnih materijala i pojedini oblici korozije. Sažeto je predstavljen razvoj korozijski postojanih čelika. Objašnjen je utjecaj legiranja na strukturu i svojstva korozijski postojanih čelika. Predstavljene su pojedine skupine korozijski postojanih čelika, način proizvodnje, kemijski sastav, struktura, svojstva, postupci obrade i primjena., The final paper describes the influence of corrosion on the properties of metallic materials and certain forms of corrosion. The development of corrosion resistant steels is briefly presented. The influence of alloying on the structure and properties of corrosion resistant steels is explained. Individual groups of corrosion-resistant steels, method of production, chemical composition, structure, properties, processing procedures and applications are presented.

U teorijskom dijelu završnog rada ukratko je opisan proces proizvodnje aluminija iz boksita. Navedena je podjela legura aluminija prema različitim kriterijima, njihovo označavanje i opisan postupak toplinske obrade precipitacijskog očvršćivanja. Posebno su opisane lijevane aluminijeve legure i navedene njihove specifičnosti. Opisana je primjena aluminijskih legura u različitim granama industrije i navedeni primjeri primjene. U praktičnom dijelu rada opisan je tehnološki proces izrade aluminijskog odljevka. Opisane su sve faze procesa, od izrade pješčanih jezgri, preko lijevanja taline pa sve do strojne obrade i završne kontrole odljevka., In the theoretical part of the final work, the process of aluminum production from bauxite is briefly described. The division of aluminum alloys according to different criteria, their marking and the process of heat treatment of precipitation hardening are described. Cast aluminum alloys are specifically described and their specifics are stated. The application of aluminum alloys in various branches of industry is described and examples of application are given. In the practical part of the paper, the technological process of making an aluminum casting is described. All stages of the process are described, from the production of sand cores, through the casting of melt to machining and final control of the casting.

U završnom radu predstavljen je sivi lijev, vrsta željeznog lijeva čija struktura se sastoji od feritne ili perlitne matrice i listića grafita. Sažeto je opisana proizvodnja sivog lijeva, utjecaj kemijskog sastava na strukturu i svojstva, kao i vrste sivog lijeva. Opisana je struktura sivog lijeva, primarna i sekundarna kristalizacija. Navedena su svojstva sivog lijeva: tehnološka, mehanička, fizička, tribološka i eksploatacijska, prednosti i nedostaci, kao i primjeri primjene. Objašnjeno je označavanje sivog lijeva. Sažeto su opisani najčešći postupci toplinske obrade kojima se poboljšavaju svojstva sivog lijeva., The final paper presents gray cast iron, a type of cast iron whose structure consists of a ferrite or pearlite matrix and graphite flakes. Production of gray cast iron, the influence of the chemical composition on the structure and properties, as well as the types of gray cast iron is briefly described. The structure of gray cast iron, primary and secondary crystallization is described. The properties of gray cast iron are given: technological, mechanical, physical, tribological and exploitation, advantages and disadvantages, as well as examples of application. The marking of gray cast iron is explained. The most common heat treatment processes that improve the properties of gray cast iron are briefly described.

Termokromne boje su materijal čija je uporaba u porastu, a glavne komponente često su im pseudoestrogeni bisfenol A i benzofenon. Za identifikaciju i kvantifikaciju ovih spojeva u termokromnim bojama razvijena je tekućinskokromatografska metoda obrnutih faza s UV-detekcijom. Tri od analiziranih petnaest uzoraka boja sadržavali su bisfenol A s masenim udjelima oko 2 %, a dva uzorka benzofenon s masenim udjelima od 0,34 % i 0,66 %. Termokromna boja koja sadrži bisfenol A i koju je moguće tiskati u laboratorijskim uvjetima otisnuta je na različite vrste papira. Razvijena je tekućinskokromatografska metoda za određivanje bisfenola A u termokromnim otiscima na papiru ekstrakcijom metanolom. Maseni udio bisfenola A u papirima bio je od 0,126 mg g‒1 do 0,778 mg g‒1. Otisci termokromne boje koja sadrži bisfenol A podvrgnuti su anaerobnoj razgradnji u tlu čime su simulirani uvjeti razgradnje na deponiju otpada. Razvijena je tekućinskokromatografska metoda s UV-detekcijom kojom je određen maseni udio bisfenola A u tlu u vremenu od 14 do 150 dana razgradnje papira i procijenjena brzina njegova raspada. Tijekom anaerobne ragradnje maseni udio bisfenola A u termokromnim papirima smanjio se do vrijednosti bliske granici određivanja metode od 0,0025 mg g‒1. Maseni udio bisfenola A u tlu tijekom anaerobne razgradnje se povećavao i nakon 150 dana razgradnje bio je od 3,21 ng g‒1 do 35,1 ng g‒1. Thermochromic inks, materials increasingly used, may contain pseudo-estrogens bisphenol A and benzophenone as main ingredients. To identify and quantify these compounds, reversed-phase liquid chromatographic method with UV-detection was developed. Three out of 15 analyzed samples contained bisphenol A in mass fractions of about 2 %. Two samples contained benzophenone with mass fractions of 0,34 % and 0,66 %. Thermochromic ink that contains bisphenol A and was applicable in laboratory conditions was printed on various types of papers. Liquid chromatographic method for determination of bisphenol A extracted in methanol was developed. Mass fraction of bisphenol A in papers was from 0,126 mg g–1 to 0,788 mg g–1. Prints of thermochromic ink containing bisphenol A were subjected to anaerobic degradation in soil to simulate the conditions at a landfill site. Reversed-phase liquid chromatographic method with UV-detection was developed to determine mass fraction of bisphenol A in soil at time intervals from 14 to 150 days, and the rate of its degradation was estimated. During the anaerobic degradation, mass fraction of bisphenol A in papers decreased to value close to detection limit of the method of 0,0025 mg g–1. Mass fraction of bisphenol A in soil increased during the anaerobic degradation, and after 150 days ranged from 3,21 ng g–1 to 35,1 ng g–1.

U završnom radu prikazana je toplinska obrada žiga za utiskivanje oznaka na metal. Rad se sastoji od teorijskog i praktičnog dijela. U teorijskom dijelu prikazana su saznanja o podjeli i vrstama alatnih čelika, njihovoj primjeni u strojarstvu, o utjecaju kemijskog sastava i mikrostrukturi kod toplinskih obrada kaljenja i popuštanja. U praktičnom dijelu završnog rada, za izabrani materijal žiga, u proizvodnim pogonima tvrtke Sigmat d.o.o. u Slavonskom Brodu, na postojećim strojnim kapacitetima, električnoj peći i drugoj potrebnoj opremi, izvršena je priprema uzoraka i toplinska obrada. Na temelju ostvarenih rezultata nakon toplinske obrade usvojen je pravovaljani tehnološki postupak za izradu žiga., The final work presents the heat treatment of s stamp for stamping marks on metal. The work consists of a theoretical and a practical part. The theoretical part presents knowledge about the division and types of tool steels, their application in mehanical engineering, the influence of chemical composition and microstructure in heat treatment of hardening and tempering. In the practical part of the final work, for the selected trademark material, in the production facilities of Sigmat d.o.o. in Slavonski Brod, on the existing machine capacities, electric furnace and other necessary equipment, samples were prepared and heat treatment was performed. Based on the achieved results after heat treatment, a valid technological procedure for making a trademark was adopted.

Motivacija za pisanje ovoga rada je želja za prikupljanjem, vrednovanjem, organiziranjem i objavljivanjem sadržaja koji će dati pregled područja te koristiti stručnoj i znanstvenoj zajednici u daljnjemu radu. Građa za bibliografiju radova s područja košarke objavljenih u Hrvatskoj do 2019. : znanstveni i stručni članci se bavi znanstvenim i stručnim člancima kao rezultatima stručnog i znanstveno-istraživačkog rada na području košarkaške igre u Hrvatskoj od početaka zabilježenih sustavnih istraživanja 1970-tih zaključno s 2018. godinom. Uvodna poglavlja daju sažeti pregled osnova bibliografije i košarkaške igre. Bibliografski popis donosi isključivo kategorizirane znanstvene i stručne radove u dva niza: Znanstveni i stručni članci u časopisima i Znanstveni i stručni radovi u zbornicima sa skupova, s ukupno 384 bibliografske jedinice. Zapisi sadrže osnovne elemente bibliografskog opisa, redani su kronološki, a unutar godišta abecedno prema autorskoj odrednici. Pomoć u pristupu i pretraživanju popisa osiguravaju tri kazala: kazalo autora, predmetno kazalo i kazalo časopisa. Izvori za sastavljanje bibliografije su većinom sekundarni što ostavlja mjesta za daljnja istraživanja i dopunjavanja. Stručna i znanstvena istraživanja košarkaške igre u Hrvatskoj posebno su se intenzivirala nakon osamostaljenja države te su danas sustavna, interdisciplinarna i relativno opsežna. Ova bibliografija je doprinos uređivanju i organiziranju informacija s ovoga područja što bi trebalo olakšati pristup bibliografskim izvorima u budućem znanstveno-istraživačkom radu. Vjerujem da će ona biti sastavni dio moga autorskog projekta cjelovitog popisivanja raznolike bibliografske građe objavljene u Hrvatskoj s temom košarkaške igre koji će biti objavljen uskoro. The motivation for writing this paper is based upon a desire to collect, evaluate, organize and publish content providing an overview of the scope, eventually being used by the field of expert and scientific community in their further works. Materials for the Bibliography of Papers in the Field of Basketball Published in Croatia by 2019 : scientific and expert articles is dealing with the mentioned content as a result of a previous research work in the field of basketball in Croatia dating back from the beginning of the systematic researches in the 1970's until 2019. The introductory chapters present a summary overview of the basics of bibliography, as well as the basics of basketball as a sport. The bibliographic list provides only categorized scientific and expert papers presented in two series: Scientific and Expert Articles in Journals and Scientific and Expert Papers in Proceedings (contenting the total of 384 bibliographic records). The records contain the basic elements of the bibliographic description, they are chronologically lined up within the year alphabetically according to the author headings. Access and search help provide three indexes: an author index, a subject index and a journal index. Bibliography sources are mostly ones of secondary nature, leaving space for further research and supplementation. Expert and scientific research of basketball in Croatia have intensified especially after the independence in the 1990's and become systematic, interdisciplinary and relatively extensive today. This bibliography is a contribution to the editing and organiziting information from this scope which should facilitate access to bibliographic sources in future scientific research work. I believe it will be an integral part of my authoring project which includes comprehensive bibliography of a various materials published in Croatia on the subject of basketball to be released shortly.

Temelj su ovoga rada dokumenti iz fonda povjesničara i arhivista Emila Laszowskoga u Hrvatskom državnom arhivu. Preko njih predstavljene su pogranične prijateljske, rodbinske i kulturne veze između društvenih elita grada Metlike u Sloveniji i obližnjih hrvatskih krajeva (Brlog, Bubnjarci, Žumberak i dr.) u 18. i 19. stoljeću. Na taj način bile su povezane obitelji Fux iz Metlike, koja je više od 200 godina imala u nasljednom zakupu poštansku postaju u Metliki, obitelj Šufflay iz Brloga i druge. Pored toga, postavljeno je pitanje vjerodostojnosti grba i kronike obitelji Fux, iz čijega su opisa već kod prvoga čitanja zapažene nedosljednosti koje su upućivale na pretpostavku da je obiteljska kronika izmišljena., This article deals with the history of the Fux family from Metlika in the region Bela Krajina and the bonds between social elites of the town Metlika in Slovenia and the surrounding communities from Croatia. One part of the family history was taken from the personal papers of Emil Laszowski at the Croatian State Archives because he had a relationship with this family; the other part was taken from numerous published sources. The history of the Fux family was carefully researched by Jože Dular, a museologist, poet and fiction writer, who was the founder of the Belokranjski Museum in Metlika and its long-term director. He was married to the one of descendants of the Fux family and lived until his death in the house which was built in 1863 by Antonija Fux, born Wanka von Lenzenheim. The Fux family, who had been creating wealth for years and peaked in the 18th and 19th centuries, made their social and economic position among the social elite along the border through marriages. Thanks to the diary of Emil Laszowski, which is also preserved in his personal papers at the Croatian State Archives it was possible to describe in detail the unhappy marriage and fate of Antonija Jr., born Fux and Daniel Šufflay from the nearby Croatian mansion of Brlog.Special attention in the article is dedicated to Antonija Wanka, married Fux, and her connections with Metlika folk revivalists such as Janez Kapelle and Anton Navratil. Navratil was the founder of the town’s reading room in 1865 and in his opposition to the German influence he mobilised not only the local followers, but also the adjacent Croats, of whom it is worthy to mention the Šufflays from Brlog, the Kniewald brothers from Grič near Karlovac and the Vranitzany family from Jurovo.We have consequently established that the social elite of such a small frontier town in the second half of the 19th century was international. In addition to the local Slovenes, it was composed of descendants of Czech immigrants (Navratil, Wanka von Lenzenheim, Horaček), Italians (Parma, immigrants from Monaster near Aquileia, Capelle) and the Germans from Kočevje (Sturm, Weibl and possibly Fux). The marriages of members of the Fux family with the border elites of neighbouring Croatia (Hranilović, Šufflay, Krištof, Lorković) were negligible. Namely, the composition of the Habsburg Monarchy and the practice of its administration encouraged ethnic pluralism and frequent migration in almost all parts of it, which was the case in Metlika too.Finally, a few words are dedicated to the chronicle of the Fux family, which allegedly proves that they are of a noble origin. The transcript is in Emil Laszowski's personal papers. Laszowski received the template from members of the Fux family, with whom he was a friend, as well as a relative. Special attention was paid to avoid mistaking this fictional creation for a historical fact.Although the "nobility" of the Fux family is proven to be a forgery, the question remains how this large family did not receive it at a time when families of clerks and soldiers received the nobility very easily, and the rich simply bought it. A sufficient reason for "merit and loyalty" to the emperor would be the long-term hereditary lease of an important post office in Metlika, which sent mail from Karlovac, one of the most important strategic strongholds of the Habsburg Monarchy, further to Ljubljana, Graz and Vienna.

U radu je prikazano što se i kako o Prvome svjetskom ratu pisalo u Krčkom zborniku kao časopisu Povijesnog društva otoka Krka. Krčki zbornik od prvoga objavljenog sveska 1970. godine pa do danas predstavlja njegovu okosnicu i prepoznatljivost djelovanja Povijesnog društva otoka Krka. Na temelju toga korpusa (sv. 1-69/1970-2013) prikazano je stanje istraženosti tema iz razdoblja Prvoga svjetskog rata vezanih uz otok Krk i Krčane te ukazano na neke buduće zadatke i projekte., One of the most crucial events in 20th century history – the First World War (1914-1918) – certainly had numerous repercussions and left more or less visible traces on the lives of the people and development on the largest Adriatic island – Krk. Even though one may have the impression that this era has been thoroughly analysed and evaluated in the historiographic sense, we may be unpleasantly surprised when seeking out the relevant literature on this topic. In fact, with regard to the island of Krk, all that one may find is limited to a few works and shorter nonscholarly articles, as well as the unavoidable and foundational book for a general understanding of Krk’s history: the book Otok Krk kroz vjekove [The Island of Krk Over the Centuries] by Mihovil Bolonić and Ivan Žic-Rokov (1977), which now has cult status. So this paper presents what was written about and how the First World War was covered in Krčki zbornik [Krk Almanac], the sole specialized scholarly / professional periodical on the island of Krk that covers various fields of scholarship, but with a primary focus on humanities and the social sciences. As the journal of the Krk Historical Society – which was established in 1969 with the fundamental aim of advancing scholarly research in the fields of history and other disciplines and their popularization, improvement of educational instruction, development of museum and conservation activities, ethnography and folklore, and development of historical and other institutions on the island and beyond, as well as collaboration with other institutions, etc. – Krčki zbornik, from its first volume published in 1970 under the editor Petar Strčić through the 68 printed volumes that followed (with two forthcoming), has served as the Society’s backbone and made it recognizable. Based on this body of work (vols. 1-69 / 1970-2013), this paper shows the extent of research into the First World War era tied to the island of Krk and Krk’s residents and points to certain future priorities and projects (systematic archival research, publication of valuable source materials, analytical articles, syntheses – Otok Krk i Prvi svjetski rat [The Island of Krk and the First World War] etc.).

Wireless chemical sensors are increasingly finding use as analytical devices in healthcare diagnostics, wearable sensing (sweat analysis) and in the rapidly emerging area of the Sensor Internet of Things (SIoT). In such wireless scenarios, the application of fluorescence-based sensors is lagging behind other types of transduction mechanisms. In this work a new low-cost and highly portable wireless fluorimeter for optical chemical fluorescence intensity measurements is presented (bill-of-materials approximately €20). The fluorimeter is programmed and communicates wirelessly with mobile devices or personal computers by radio-frequency identification (RFID) or near-field communication (NFC). This novel mobile analytical system is highly adaptable for use with different fluorescent sensor chemistries and analytes. The fluorimeter has been evaluated in the laboratory in two sets of proof-of-concept experiments: firstly fluorimetry in solution, where the fluorescence intensities of fluorescein were recorded, and secondly chloride sensing via a paper-immobilised quinine sulphate fluorescent indicator. The latter represents the first demonstration of wireless (radio-frequency) fluorescence-based chloride sensing. Satisfactory analytical performance was achieved in the entire range of sweat chloride concentrations. The wireless fluorimeter system presented here could make a significant contribution to several emerging areas of mobile chemical sensor research, including wearable sensors for healthcare and sport, mobile point-of-sample diagnostics as well as more generally for the Sensor Internet of Things.

U okviru izlaganja autori su objasnili važnost autorskopravnih pitanja i korištenja otvorenih licencija u ostvarivanju otvorenog pristupa i otvorene znanosti. Razmotrena su pitanja koja se odnose na različite vrste publikacija, različite verzije radova koje nastaju tijekom procesa objavljivanja, politike izdavača, i uloge različitih dionika (autora, knjižničara, urednika repozitorija). Prikazane su promjene koje u znanstveno izdavaštvo donosi Plan S. Predložena su moguća rješenja za samoarhiviranje koja su na raspolaganju hrvatskim autorima., Funding: National Initiatives for Open Science in Europe (NI4OS-Europe) & OpenAIRE Advancing Open Scholarship (OpenAIRE-Advance).

Fotografije čiji se vizualni sadržaj veže uz Domovinski rat u raspravu uvode odabrana djela nastala u vrijeme rata, ali i nakon sukoba i razaranja, ukazujući na interes umjetnika za njihove posljedice, popraćene složenim procesima sjećanja i pamćenja. Nerijetko se smatra da je fotografija u samo ratno vrijeme u najvećem broju slučajeva korištena kao dokaz ili kao propaganda. Za razliku od dokumentarne i reportažne fotografije, umjetnički radovi o kojima je riječ ukazuju na prekide povijesnog kontinuiteta, interpretirajući traumatične događaje i promišljajući njihova značenja. Osim što se djela referiraju na same događaje, razmatraju se i pitanja povezana s objektivnošću, sudioništvom i odgovornošću fotografa, korištenjem fotografije u prostoru javnosti i konceptualizacijom rata kroz postupke kojima umjetnici preispituju situacije u kojima su se zatekli. U strukturi njihove umjetničke prakse nailazi se na strukture svojevrsnih arhiva unutar kojih „pohranjuju” svoja vizualna i druga saznanja, kao i na specifičan odnos prema krajoliku, koji se razmatra u kontekstu recentnoga teorijskog pisanja o mjestima opterećenima traumom., Photographs related to the Homeland War in Croatia were partly taken during the conflict (1991–1995), and partly in the aftermath of the destruction and suffering, when artists recorded their consequences and used visual content to discuss the complex processes of memory and remembrance. While photographs taken during the war are often considered to be evidence, but also propaganda, and most of them are characterized by documentary and reportage approach, this paper singles out several artistic series that interpret traumatic events and reflect on their meaning through creative processes of conceptualization, as well as those that are reminiscent of archival structures and specific ways of storing visual and other types of knowledge. In addition, attention is paid to the topic of landscape, which recent photographic practice, but also theoretical writing often associate with trauma. In writing on photography in Croatia, image of the Homeland War are mainly reduced to a reportage approach that is made available through print and electronic media. Still, the introduction of the theme of trauma into artistic discourse has revealed a need for using (and, consequently, creating) a kind of structure that would make it possible to record the suffering of others by more or less methodical visual means. The freely understood notion of archives, as well as landscape that is primarily understood as a contemplative and only secondly a geological formation, have been used in the context of intimate, non-institutional “storages of objects” and layers of memory and history, whereby their introduction into the common context counts on individual artistic approaches and unpredictable meanings that arise from them. Three series were created during the war: Darko Bavoljak came across the ruined remains of the company Budućnost that operated in Eastern Slavonia, and focused on a specific typography that unequivocally points to the time of the company's founding and the political context that is recognized and inscribed through it. The series by Pavo Urban, created on the 6th December 1991, owes its iconic status primarily to the fact that the young artist died while filming it, while capturing the threatening, melancholic atmosphere of the environment he came from. Almost at the same time, Antun Maračić created his series Ne-grad i njegov subrealizam [Non-City and its Subrealism]. We interpret it along the lines of documentarism, while the very title of the series and the specific atmosphere of nothingness emphasize the conceptualized fragmentariness and the feeling of nausea, prompted by the endangerment of life and the nullification of urban characteristics of the place where the photographs were taken. Younger generations who did not directly witness war-time devastations approach this topic with a different motivation, such as Bojan Mrđenović who also photographed the remains of the Budućnost company in Eastern Slavonia. He sees them primarily as metaphors of conflict and a general attitude toward the legacy of socialism and the ways in which, thanks to architectural modernism, this ideological system marked almost all urban and rural places, a sign that the transition period of the 1990s completely ignored. The thesis on the posteriority of photography is concluded by reflecting on artworks by Sandra Vitaljić from the Neplodna tla [Infertile Grounds] series, which was created not only at the sites of conflicts from the Homeland War, but also at the sites of mass crimes from the Second World War. This series is characterised by practices that are similar to archiving, as well as by a personal experience of walking in nature whereby traumatic memories are reactivated through the visualisation of the landscape, while its complex research structure includes considerations on the correspondence of history and memory and other topics. By widening the discussion to include photographs of the Homeland War, whether they were taken during the War (Bavoljak, Urban, Maračić) or were the result of research and interpretation of traumatic events in a broader historical—and thus also political and other contexts (Mrđenović, Vitaljić) - we encounter different levels and sources of trauma. Selected photographs convey the inexplicable—a source of personal and collective pain that cannot be unambiguously understood and interpreted.

Prikaz zbornika znanstvenog skupa.

Papirnati mikrofluidički senzori predstavljaju inovativnu tehnologiju za manipulaciju malih volumena uzoraka i detekciju razičitih vrsta analta. Cilj je takve tehnologije pružiti jeftine, bio-razgradive, lako prenosive uređaje, neovisne o skupoj instrumentaciji, a kojma će moći rukovati i needucirano osoblje. Cilj je ovog rada staviti papirnate mikrofluidičke senzore u širi kontekst mikrofluidičkih uređaja, dati pregled prednosti i mana takve tehnologije, opisati najčešće korištene metode izrade papirnatih mikrofluidičkih uređaja kao i metode detekcije analita. Velik je dio rada posvećen bitnoj skupini takvih senzora, papirnatim mikrofluidičkim biosenzorima te njihovoj podskupini, papirnatim mikrofluidičkim enzimskim biosenzorima. Rad također obrađuje područja primjene te nove tehnologije i zapreke koje bi ona trebala prevladati kako bi iz laboratorija prešla u komercijalnu upotrebu. Paper based microfluidic sensors represent an innovative technology for handling small volumes of samples and analysis of different types of analytes. The goal of this technology is to provide devices that are inexpensive, biodegradable, portable, independent of expensive equipment and that can be handled by untrained personnel. The aim of this thesis is to place paper microfluidic sensors in the wider context of microfluidic devices, discuss their advantages and disadvantages, describe the methods for their production as well as the methods for analyte detection. A considerable part of the thesis is dedicated to an important group of such sensors, paper microfluidic biosensors and their subgroup, paper microfluidic enzyme biosensors. The thesis also focuses on highlighting new technologies in the field of paper microfluidics as well as on the obstacles this technology needs to surpass in order to step out of the laboratory and becomes widely used.

U radu je prikazana izvedba papirnatog galvanskog članka prikladnog za uporabu u papirnatim mikrofluidičkim analitičkim napravama. Izrađeni galvanski članak sastojao se od grafitne katode izrađene crtanjem po papiru mekom grafitnom olovkom i aluminijske anode izrađene od samoljepljive aluminijske folije. Rad članka temeljio se na oksidaciji aluminijske anode i redukciji ABTS radikala, in situ generiranog u članku, oksidacijom ABTS-a s vodikovim peroksidom u prisutnosti željezova(II) ftalocijanina kao katalizatora. Sve komponente potrebne za rad konstruiranog galvanskog članka, uključujući i vodikov peroksid u formi urea peroksida, unaprijed su pohranjene u članku u obliku krutina pa je za pokretanje članka dovoljno u njega dodati mali volumen vode. Pri optimalnim uvjetima, konstruirani galvanski članak u stanju je davati struju od približno 0,1 mA, uz napon od 1 V, tijekom perioda od otprilike 30 minuta, što ga čini prikladnim za napajanje potencijalnih papirnatih mikrofluidičkih analitičkih naprava s integriranim elektroničkim sklopovima za obradu signala i prikaz rezultata mjerenja. In this work, a paper-based galvanic cell suitable for application in microfluidic paper-based analytical devices is described. The galvanic cell comprises of a graphite cathode fabricated by drawing on the paper with a soft graphite pencil and an aluminium anode, fabricated from self-adhesive aluminium foil. Operational mode of the cell was based on the oxidation of the aluminium anode and the reduction of the ABTS radical, generated in situ, inside the cell, by oxidizing ABTS with hydrogen peroxide in the presence of iron(II) phthalocyanine as a catalyst. All of the components required for the operation of the constructed galvanic cell, including hydrogen peroxide in the form of urea peroxide, were stored in advance inside the cell in the form of powdered solid, so the operation of the galvanic cell can be initiated simply by adding a small volume of water into the cell. Under optimal conditions, the constructed galvanic cell produced an electric current of approximately 0.1 mA and a voltage of 1 V, during a period of around 30 minutes, which makes it suitable for powering of microfluidic paper-based analytical devices with integrated electronic circuits for signal processing and displaying measurement results.

Izazovi održivosti u ovome radu sagledani su u prostorno drugačijoj perspektivi od klasične urbano-ruralne, kao dio šireg prostornog konteksta urbanog područja, konkretno, urbane aglomeracije Zagreb. Takav pristup omogućio je širi uvid u odnose ekonomskih, ekoloških, kulturnih i političkih aspekata urbane održivosti zagrebačke regije bez da se izgubi izravna veza teorijskog pristupa fenomenu održivosti i same prakse tipa razvoja koji se drži razvoja održivih parametara i koncepata. Analizom društvenih učinaka tvornice u lokalnoj zajednici što je predmet ovog rada, na istraživanom se primjeru konstatira da je učinak tvornice element pozitivne promjene ali i razvojni potencijal koji može imati održivo i društveno odgovorno poslovanje za razvoj mjesta ali i šireg područja. Temeljni je cilj ovog doktorskog rada istražiti na koje je sve načine pojedinačni razvojni subjekt, konkretno, tvornica za proizvodnju valovitog papira u Zaboku, utjecao na društveno-gospodarski razvoj grada Zaboka u određenom vremenskom razdoblju te do kakvih je promjena u mikrosredini, tj. Zaboku, došlo zbog postojanja navedene tvornice. Izgradnja i početak funkcioniranja tvornice 2003. godine polazna je točka ove analize utvrđivanja pozitivnih i negativnih promjena na različite aspekte razvoja mjesta Zabok i njegovu okolicu tijekom godina rada tvornice. U tu svrhu, korištena je dostupna statistička i druga relevantna pisana dokumentacija te je provedeno kvalitativno empirijsko istraživanje stavova različitih sudionika (stakeholdera) metodom dubinskog, odnosno polustrukturiranog intervjua (stanovnika Zaboka, predstavnika Uprave tvornice, predstavnika Grada te predstavnika udruge za zaštitu okoliša). Rezultati istraživanja pokazali su načine na koje tvornica u svom redovitom poslovanju primjenjuje načela tzv. održivog razvoja. Budući da je djelatnost promatrane tvornice usmjerena na proizvodnju upotrebnih dobara s različitim utjecajima na neposredan i širi okoliš, u ovom je radu najveći naglasak stavljen upravo na okolišnu komponentnu održivog razvoja, odnosno utjecaj poslovanja tvornice na okoliš ali i na percepciju različitih aktera i dionika o potencijalnim utjecajima tvornice. Zaključna konstatacija rezultata empirijskog istraživanja jest da je tvornica svojim dosadašnjim poslovanjem stvorila pozitivnu sliku o svom djelovanju u okvirima lokalne zajednice, ali i šire, zbog ukupnog poticajnog i odgovornog odnosa prema sredini, poštivanja propisa poslovanja te implementacije načela društveno odgovornog poslovanja. Polazne hipoteze ovog rada koje će u nastavku rada biti preciznije objašnjene su potvrđene što tvornici može omogućiti dugoročnije planiranje, usavršavanje tehnologije te poboljšavanje i modernizaciju pogona te ekološki još osvješteniji odnos prema okolišu. The challenges of sustainability are examined in this paper from a spatial perspective that differs from the classical division of urban and rural, as part of the broader approach taking into account spatial context of the urban area, specifically the urban agglomeration of Zagreb. This approach has us to develop enabled broader insights into the relationships among the economic, ecological, cultural and political aspects of urban sustainability of Zagreb region, without losing direct ties with the theoretical approaches to sustainability and analysis of current practices. Through the analysis of social effects of one factory on local community, the examined case shows positive social changes and development potential that sustainable and socially responsibility can have on the development of towns and wider urban areas. The fundamental objective of this dissertation was to examine all the ways in which an individual development entity, in this case a cardboard factory, influenced the socioeconomic development of the town of Zabok over a given time period (2003-2019), and the changes that occurred in the microarea, i.e. Zabok city, due to the existence and operations of the factory. The construction of the factory and its start of operations in 2003 was the starting point of this analysis which was to determine positive and negative changes on different aspects of development of the town of Zabok and its surrounding through the years of operation of the factory. Based on the listed objective, this research aims to determine the impacts of the factory on the town of Zabok. The presumption is that the influences will primarily be positive for several reasons, as laid down in three hypotheses: 1. Stimulating production in the factory has a positive impact on the socioeconomic development of the town and the local community. 2. In its operations to date (since 2003), the factory has attained a positive reputation in the narrow and wider surroundings, primarily within the framework of the local community but also beyond, due to the stimulatory and responsible approach towards the town, abiding by all business regulations and due to the ecological characteristics of this area. 3. Implementing the principles of corporate social responsibility in the regular factory operations has led to conservation and improvement of the environment in the town. The social effect on development of the town was examined through the different aspects of operations of the cardboard factory in Zabok on the surrounding environment. Based on the theoretical framework, several indicators (objective and subjective) were selected to examine the social and ecological paradigms, particularly the contemporary paradigm of development that considers the environment as a fundamental resource, and where the concept of sustainable development is contrary to industrial development, thereby contributing to the establishment of broad ecologically friendly development. The desk research method was used, based on the analysis of relevant literature and documentation, through the following available secondary data, such as theoretical and research studies by homebound and international authors in relevant fields, statistical and historical archives of the town, regional development plans, data collected in the local self-government offices, and in the factory that is the subject of this study, relevant legal regulations, and an analysis of the content of the weekly newspaper Zagorski list in the period from 2003 to 2018, in order to obtain insight into the content published concerning the assessment of operations of the factory on its local environment. A qualitative empirical study was also conducted to collect the opinions and statements of various stakeholders, using the deep or semi-structured interview technique. A total of 21 interviews were performed with stakeholders from five different groups assuming that they have different opinions on the types and intensity of influence of the factory on the town environment. The five groups were: representatives of the Town of Zabok; residents living in close proximity to the factory; residents living further away from the factory or in the outskirts of the Town of Zabok; representatives of the Management board of the Dunapack factory; and representatives of civil society associations dealing with environmental protection. The research results indicated the ways in which the factory has applied the principles of sustainable development in its operations. Considering the production activities of the factory, this dissertation placed the greatest emphasis on the analysis of the environmental elements of sustainable development, i.e. the impacts of the factory's operations on the environment. The conclusions of the results of the empirical study were that from the start of production, the factory positively affected the socioeconomic development of the town and local community, and that the factory has created a positive image of its operations up to date within local community and wider, due to the overall stimulatory and responsible approach taken towards the town, abiding by regulations on operations, and the implementation of the principles of corporate social responsibility. This confirmed the set hypotheses of this research. The issue that was the subject of study of this doctoral dissertation serves as the basis for similar analyses and research in other towns. It is clear that this topic demands an interdisciplinary approach, including numerous aspects and an analysis of the potential impacts of development potential in urban areas. Due to the interdisciplinary approach, the concept of sustainable development can be considered most relevant for future research. Addressing the concept of sustainable development implies a multidisciplinary approach encompassing a wide spectrum of scientific disciplines, from the technical and social sciences, to the humanities. For example, sociology, as a synthetic science, contributes to other social disciplines within which certain elements of sustainable development are studied and critically evaluated, such as urban sociology, sociology of tourism, social ecology and sociology of risk. This dissertation examines the position of a modern factory within the framework of a transitional company. It was established that the factory has been accepted within the community, that it operates in cohabitation with the local population, and that there have been no “outbreaks” in its regular operations over the past 16 years. The conditions in which this cohabitation of technology and local life is possible are based on several key elements: 1. The factory is an entity that provides possible employment. 2. The factory has the capacity to be successful. 3. The factory has a positive impact on the development of the local community. 4. Over the year, the factory has built friendly relations with the town, and positively influenced its development. 5. There is potential for the future development of the factory in Zabok, since its production is based on the concept of sustainable development. 6. There is potential for the future development of the factory, particularly if it abides by the principles of rational operations based on a clear mission to support the town’s development and supports a range of cultural and other events. In addition to creating a positive atmosphere in the local community and in the town, another key requirement for the positive success of the factory is the need to develop a legal framework in which the compensation to the local community is clearly outlined, not only through incidental and non-systemic situations. 7. In the near future, to ensure the continuation of the friendly relations between the factory and the community, it is necessary to base this relationship on the principles of corporate social responsibility and other rules of conduct, which should be increasingly based on systemically planned rules of conduct. Finally, the new knowledge acquired, in combination with the existing knowledge, will enrich and direct future research. This will improve the sociological aspect of social transformation, laying the foundations for strong development of socially responsible actions in the integration of foreign companies in the daily life of the local community.

Zahvaljujući današnjim brojnim tehnološkim dostignućima, fokus istraživanja (bio)kemijskih senzora usmjeren je prema realizaciji nosivih analitičkih uređaja. Nosivi (bio)kemijski senzori su alati koji omogućavaju kontinuiranu i neinvazivnu analizu sadržaja bioloških fluida (npr. znoj, suze, slina, međustanična kapljevina ili dah) kao i detekciju određenih supstanci u okolišu nositelja senzora. Optički (bio)kemijski senzori su vrsta (bio)kemijskih senzora pomoću kojih se dolazi do željene informacije pomoću interakcije s elektromagnetskim zračenjem. U literaturi se često spominju pod ključnom riječi „optode“, zbog velike sličnosti s njihovim elektrokemijskim ekvivalentima-elektrodama. Problemi kao što su odabir pogodnih materijala, izvor napajanja te vjerodostojnost prikupljenih podataka za analizu glavni su razlog komercijalne nedostupnosti nosivih kemijskih senzora. U zadnje vrijeme, sve je veći interes za korištenjem papira i tekstila kao supstratnih materijala. Dostupnost, pristupačnosti te niska cijena papira sasvim su opravdani razlozi za odabir takvog supstrata. S druge strane, tekstilni senzori su s praktičnog stajališta najinteresantniji kako bi se već nalazili integrirani u odjevnim predmetima. Cilj ovog rada bio je ispitati dobro utvrđeni mehanizam ion-selektivnih optoda na različitim supstratima. Pripravljeni su senzori za kalij na bazi valinomicina i lipofiliziranog Nile Blue indikatorskog bojila, te je provedena njihova analitička karakterizacija s potencijalnom primjenom u analizi sadržaja znoja. U okviru ovog istraživanja, kromatografski papir se pokazao kao najbolji supstrat. Eksperimentalni rezultati ispitivanja optoda na kromatografskom papiru su pokazali da dinamičko područje obuhvaća preko tri reda veličine (10^-1 M - 10^-4 M K+) koje je zadovoljavajuće za praktičnu primjenu s obzirom na činjenicu da se prosječna koncentracija kalijevih iona u znoju nalazi upravo u tom intervalu. Treba naglasiti da je upotrebljivost ovih senzora limitirana zbog poznatog problema s ispiranjem osjetilnih komponenti senzora što pokazuju rezultati karakterizacije; obnovljivost, ponovljivost i stabilnost. Ovako pripravljene papirne kalij-selektivne optode bi se mogle koristiti za predviđenu aplikaciju u obliku jednokratnih test-traka. Numerous advancements in today’s technology had impact on research of (bio)chemical sensors. Focus has been shifted towards realization of wearable analytical devices. Wearable (bio)chemical sensors are analytical tools that provide the opportunity for continuous and non-invasive analysis of body fluid content (such as sweat, tears, saliva, interstitial fluid or breath), as well as the ability to detect substances in the environment of their user. Optical (bio)chemical sensors represent the subclass of (bio)chemical sensors where interaction with electromagnetic radiation is employed in order to extract useful information. They are most commonly named “optodes” in the literature, due to great similarity with their electrochemical equivalents-electrodes. Certain problems such as choosing appropriate materials, external power sources and credibility of harvested data still represent the challenge that needs to be resolved in order to start commercial production of wearable (bio)chemical sensors. A growing interest in using paper and textile as substrate materials has been observed. Availability and affordability of low-cost paper are main reasons to choose this material. On the other hand, textile-based sensors would be most practical due to simple integration with existing clothing material. The ultimate goal of this thesis was to investigate the mechanism of ion-selective optodes on different substrates. Potassium-selective optodes based on valinomycin carrier and lipophilized Nile Blue indicator dye were fabricated with potential application in analyzing the sweat content. Fabrication of sensors was followed with their analytical characterization. Experimental results have shown that chromatography grade paper seems to be the most appropriate substrate material, considering the investigated mechanism. Such paper-based optodes were characterized in greater detail, exhibiting dynamic range that covers over three orders of magnitude (10^-1 M - 10^-4 M K+), making them suitable for predicted application. Average potassium concentration in human sweat lies within that range. It should be emphasized that the usability of these sensors is limited owing to the well-known leaching problem, where sensing components are being washed out of the system. Characterization parameters such as repeatability, reproducibility and stability have clarified that apparent problem. Paper-based potassium-selective optodes investigated in this research could therefore be used for predicted application as single-use, disposable paper strips.

S obzirom na sveprisutnost papira i svakodnevnu upotrebu u mnogim područjima života, zahtjevi za proizvodnjom i kvalitetom papira postaju sve veći. Važan dio stroja za proizvodnju papira jest sustav grijanja pogona za sušenje papira. Kroz ovaj rad, prikazano je jedno od rješenja gdje se za sustav grijanja pogona za sušenje papira koristi princip pare i kondenzata, tzv. Steam and Condensate, koji prolazi kroz cilindre raspoređene u toplinskim skupinama. Rad opisuje tehnološki proces sustava grijanja stroja za proizvodnju papira te rješenje automatizacijskog sustava pomoću Siemensovih PLC uređaja. Drugi dio rada opisuje programsko rješenje (hardverska konfiguracija i softver) koristeći Siemensovo programsko okruženje PCS7, te razvoj nadzorno-upravljačkog sustava za upravljanje procesom koji je ostvaren Siemensovom WinCC aplikacijom. Rad sadrži i opisuje osnovne značajke i karakteristike sustava grijanja stroja za proizvodnju papira. Considering the huge presence of paper and its everyday use in many areas of life, the requirements for manufacture and paper quality are becoming even larger. An important part of the paper machine is the heating system. Through this paper, one of the solutions is presented, where the principle of steam and condensate, which passes through the cylinders distributed in the heating groups, is used for the paper dryer heating system. This paper describes the technological process of the heating system of the paper machine and the solution of the automation system by using Siemens PLC devices. The second part of this paper describes the program solution (hardware configuration and software) using the Siemens PCS7 programming surroundings and the development of a supervisory process control system performed by the Siemens WinCC application. This paper contains and describes the basic features and characteristics of the heating system of the paper machine.

Rad problematizira reprezentaciju ženstvenosti u hrvatskoj inačici renomiranog američkog časopisa Cosmopolitana. Cilj je analizirati diskurs ženstvenosti u širem društveno-kulturnom kontekstu, a potom reprezentaciju tog diskursa u časopisu koji reflektira već postojeću i ujedno producira svoju ideju ženstvenosti. Inspirirana feminističkim pristupima u antropologiji, rod promatram kao društveno konstruiranu kategoriju koja se konstantno (re)producira izvođenjem društveno očekivanih ponašanja koja se smatraju primjerenim za žene (i muškarce) u određenom povijesnom trenutku. Diskurzivnom analizom naslovnica i fenomena Cosmo djevojke, prikazuje se na koji način reprezentacija ženstvenosti reducira istu na „idealni fizički izgled“ koji postaje temeljna garancija za ostvarenje ideologije „have it all“. Uvidima u različite diskurse i ambivalencije koje portretiraju suvremenu ženu u Republici Hrvatskoj, rad doprinosi području antropologije roda i feminističke antropologije. This MA dissertation problematizes the representation of femininity in the Croatian version of the renowned American magazine Cosmopolitan. The goal is to analyze the discourse of femininity in a broader socio-cultural context, and then the representation of that discourse in a magazine that reflects the already existing and at the same time produces its own idea of femininity. Inspired by feminist anthropology, the dissertation starts with the premisse that gender is a socially constructed category that is constantly (re)produced by performing socially expected behaviors that are considered appropriate for women (and men) at a given historical moment. A discursive analysis of the covers and phenomena of the Cosmo girl shows how the representation of femininity reduces it to an „ideal physical appearance“ which becomes the main guarantee for the realization of the ideology of „have it all“. Insights into various discourses and ambivalences that portray the contemporary woman in the Republic of Croatia, the dissertation contributes to the field of gender anthropology and feminist anthropology.

Fenomenom migracija bave se različite znanstvene discipline (sociologija, demografija, povijest, antropologija, socijalna geografija, ekonomija, politologija i dr.). Multidisciplinarnost upućuje na kompleksnost fenomena migracija, kojemu se sve više pristupa i interdisciplinarno s obzirom na njegov utjecaj na različite društvene, političke i ekonomske odnose. »Izbjeglička/migrantska kriza« 2015. godine i suvremeno iseljavanje iz Hrvatske ojačali su znanstveni interes za migracije te postmigracijske procese. Cilj ove bibliografije jest znanstvenoj i stručnoj javnosti dati pregled znanstvenih radova o različitim aspektima migracija dostupnih na portalu Hrčak. Bibliografija je podijeljena u tematske cjeline koje su određene pregledom radova, ali nisu hijerarhijski strukturirane (npr. integracija jest dio migracijske politike, ali zbog broja i fokusiranosti radova na samo taj aspekt migracijske politike izdvojena je kao posebna tema). Bibliografija je napravljena neposrednim uvidom u cjelovite članke (de visu) dostupne na Hrčku – Portalu hrvatskih znanstvenih i stručnih časopisa. Hrčak je središnji portal koji na jednome mjestu okuplja hrvatske znanstvene i stručne časopise te časopise za popularizaciju znanosti i kulture koji nude otvoreni pristup svojim radovima. Započeo je s radom 2006. i na njemu se trenutačno nalazi 499 časopisa, od kojih manji dio više nije aktivan. Na Hrčku je do sada ukupno objavljeno nešto više od 228.000 radova s cjelovitim tekstom. Bibliografijom je obuhvaćeno razdoblje od 2009. do 2019. te se navode radovi iz 109 časopisa. Bibliografija je selektivna i uključeni su samo znanstveni radovi kategorizirani kao izvorni znanstveni rad, prethodno priopćenje i pregledni rad. Nisu uključeni stručni radovi, izlaganja sa znanstvenog skupa, tribine, rasprave, osvrti, bibliografije, prikazi knjiga i dr. Radovi obuhvaćeni bibliografijom objavljeni su na različitim jezicima: hrvatskom, engleskom, francuskom, njemačkom, srpskom i dr. Dio radova objavljen je i dvojezično na hrvatskom i engleskom jeziku te su za takve radove u bibliografiji navedeni naslovi članaka na oba jezika. U skladu s tematikom znanstveni radovi klasificirani su u sljedeće tematske grupe: 1. Općenito (1. – 12.),1 2. Iz povijesti migracija (13. – 113.), 3. Međunarodne migracije (114. – 159.), 4. Migracije u Europsku uniju (160. – 196.), 5. Migracije i tržište rada (197. – 236.), 6. Migrantsko poduzetništvo (237. – 240.), 7. Novčane doznake (241. – 243.), 8. Neregularne migracije (244. – 259.), 9. Krijumčarenje i trgovanje ljudima (260. – 269.), 10. Prisilne migracije (270. – 332.), 11. »Izbjeglička/Migrantska kriza« (333. – 379.), 12. Povratne migracije (380. – 391.), 13. Umirovljeničke migracije (392. – 393.), 14. Migracijske politike (394. – 439.), 15. Integracija (440. – 491.), 16. Interkulturalizam i multikulturalizam (492. – 517.), 17. Transnacionalizam i transnacionalni socijalni prostori (518. – 532.), 18. Migracije i sigurnost (533. – 553.), 19. Migracije i religija (554. – 560.), 20. Migracije i jezik (561. – 573.), 21. Migracije i žene (574. – 581.), 22. Migracije i zdravlje (582. – 592.), 23. Migracije i mediji (593. – 598.), 24. Migracije i umjetnost (599. – 609.), 25. Unutarnje migracije u Hrvatskoj (610. – 642.), 26. Hrvatsko iseljeništvo (643. – 681.), 27. Suvremeno iseljavanje iz Hrvatske (682. – 706.), 28. Doseljavanje u Hrvatsku (707. – 728.), 29. Demografski aspekti migracija (729. – 771.). S obzirom na to da se radovi bave različitim aspektima migracija, dio njih istovremeno pripada u više od jedne tematske grupe. Unutar pojedinih grupa radovi su popisani abecednim redom po prezimenima autora. Kod više radova istog autora unutar jedne grupe radovi su poredani kronološki, od najranijih do najstarijih. Bibliografska jedinica sadržava sljedeće podatke: prezime, ime, godinu, naslov rada, ime časopisa, godište, broj i raspon stranica. Bibliografija sadržava i autorsko kazalo. Prezimena i imena autora u kazalu povezani su s brojem bibliografske jedinice, a navedeni su onako kako su navedeni u časopisu, tako da se verzije prezimena ili imena istog autora nalaze jedna iza druge. Pojedini radovi svrstani su u nekoliko tematskih cjelina, a brojevi u autorskom kazalu otisnuti su masno i obično, pri čemu masno otisnuti brojevi označavaju primarnu tematsku grupu u koju je bibliografska jedinica svrstana te pokazuju broj radova pojedinog autora.

Iako tradicija narodnih knjižnica i čitaonica u Hrvatskoj na području Baranje datira još iz 19. stoljeća, njihova je povijest neispisano područje. Arhivsko se gradivo prilikom statusnih promjena, spajanja knjižnica ili njihova zatvaranja nije predavalo u nadležni arhiv te je povijesni razvoj knjižničarstva teško pratiti zbog nedostatka izvornih povijesnih dokumenata. U Belom Manastiru Narodno sveučilište „29. novembar“ od 1962. godine organizira mrežu knjižnica na području Baranje. Knjižnična mreža prestala je s radom u vrijeme Domovinskog rata. Godine 2001. Gradska knjižnica Beli Manastir izdvojena je iz sastava Pučkog otvorenog učilišta Beli Manastir te nastavlja svoj rad kao samostalna ustanova. Pučko otvoreno učilište, koje je bilo sljednik Narodnog sveučilišta „29. novembar“, 2004. godine prestaje s radom, a sudbina je arhivskog gradiva nepoznata. Ovaj se rad temelji na nekolicini u Knjižnici sačuvanih planova i programa rada i godišnjih izvješća te predstavlja rad knjižnice do osamostaljenja 2001. godine.