Search

This paper is an Investment Thesis report about a hypothetical leveraged buyout of EnviTec Biogas AG, a biogas plant operator and constructor from Germany. The deal is promising due to EnviTec’s unique business model in an auspicious biogas market. The investment thesis is defined by internationalisation, a buy-and-build strategy, including two add-ons and organic growth. The LBO is valued with a 9.8x EBITDA multiple leading to an enterprise value of €436.9M, of which 250m is financed with three debt tranches. Further, the paper comprises an in-depth analysis and explanation of financial modeling.

Renewable paper reusing plays a significant role in the sustainable environment under the background of the shortage in forest resources and the pollution from the paper industry. The conventional reusing stream of waste office paper appears to have low reusing rates while consuming massive amounts of energy in intermediate steps. In this study, we developed a novel portable renewable desktop paper reusing system based on font area detection and greyscale sensor. The proposed system consists of two main parts, namely, a greyscale sensor and font area detection model and a polishing mechanism. Acting as an ink mark detector for waste desktop paper, the greyscale sensor and font area detection model can detect the font in the waste desktop paper using an adaptive dynamic compensation schematic. The polishing mechanism will grind the font area of the wasted desktop paper, and this paper reusing processing is non-chemical, energy saving and environmentally friendly. The proposed system is demonstrated through simulations and experimental results, which show that the proposed renewable desktop paper reusing system is portable and is effective for reusing waste office paper in the office. An accuracy of 99.78% is demonstrated in the greyscale sensor and font area detection model, and the average reuse rate of one piece of paper is 2.52 times, verifying that the proposed portable system is effective and practical in renewable desktop paper reusing applications.

This position paper is the results of the work carried out by the DanishMulti-Actor Platform, which reflected onthe issue of land use in the light of climate change. In this position paper, the members of the MAP, from different backgrounds,wish to jointly highlight a number of important themes and key messages in relation to land use in Denmark, which politicians, civil servants, planners and local developers, amongst others, should take on board and act upon to the greatest possible extent in order to support and promote a green and sustainable transition, in which land use is central.Four themes have been highlighted in the document: renewable energy, food production and lowland set-aside, land ownership, and public governance and stakeholder consultation.

Data for the paper "Development of a multi-region power system risk management model for supporting China’s carbon neutrality ambition in 2060’s".

Ample interest for more efficient utilization of bio-based residues has emerged in the Nordic pulp and paper (P&P) industry, which uses virgin wood as feedstock. Although different bioenergy retrofit technologies for production of liquid, solid, and gaseous bioenergy products have been applied in the existing P&P mills, the number of installations remains small. The lack of profound knowledge of existing bioenergy retrofits hinders the replication and market uptake of potential technologies. This review synthesises the existing knowledge of European installations and identifies the key drivers and barriers for implementation to foster the market uptake of potential technologies. The bioenergy retrofits were reviewed in terms of technical maturity, drivers, barriers and market potential. Based on this evaluation, common drivers and barriers towards wider market uptake were outlined from political, economic, social, technical, environmental, and legal perspective. Technologies already commercially applied include anaerobic fermentation of sludge, bark gasification, tall oil diesel and bioethanol production, whereas lignin extraction, biomethanol production, hydrothermal liquefaction and hydrothermal carbonization are being demonstrated or first applications are under construction. The findings of this review show that a stable flow of residues at P&P mills creates a solid base for retrofitting. New innovative bio-based products would allow widening the companies' product portfolios and creating new businesses. Also, European Union's (EU) legislation drives towards advanced biofuels production. Wider uptake of the retrofitting technologies requires overcoming the barriers related to uncertainty of economic feasibility and unestablished markets for new products rather than technical immaturity.

The circular economy is considered by international institutions such as the United Nations and the European Union as the most urgent strategy to orient the economic development model towards sustainability. To find concrete applications, the circular economy requires greater awareness in consumers and businesses. The Italian paper industry, which boasts high levels of competitiveness at an international level, has initiated important restructuring and rationalization processes over the last decade with a view to recycling and sustainability. Only the final phase of the production process is yet to comply with all circular economy criteria, that is, the recovery of production waste (pulper). Hence, the actual technological and strategic challenge of the paper industry is to phase out landfilling of recyclable waste and implement energy recovery strategies, as well as promoting the use of renewable sources.

Ample interest for more efficient utilization of bio-based residues has emerged in the Nordic pulp and paper (P&P) industry, which uses virgin wood as feedstock. Although different bioenergy retrofit technologies for production of liquid, solid, and gaseous bioenergy products have been applied in the existing P&P mills, the number of installations remains small. The lack of profound knowledge of existing bioenergy retrofits hinders the replication and market uptake of potential technologies. This review synthesises the existing knowledge of European installations and identifies the key drivers and barriers for implementation to foster the market uptake of potential technologies. The bioenergy retrofits were reviewed in terms of technical maturity, drivers, barriers and market potential. Based on this evaluation, common drivers and barriers towards wider market uptake were outlined from political, economic, social, technical, environmental, and legal perspective. Technologies already commercially applied include anaerobic fermentation of sludge, bark gasification, tall oil diesel and bioethanol production, whereas lignin extraction, biomethanol production, hydrothermal liquefaction and hydrothermal carbonization are being demonstrated or first applications are under construction. The findings of this review show that a stable flow of residues at P&P mills creates a solid base for retrofitting. New innovative bio-based products would allow widening the companies' product portfolios and creating new businesses. Also, European Union's (EU) legislation drives towards advanced biofuels production. Wider uptake of the retrofitting technologies requires overcoming the barriers related to uncertainty of economic feasibility and unestablished markets for new products rather than technical immaturity.

Ample interest for more efficient utilization of bio-based residues has emerged in the Nordic pulp and paper (P&P) industry, which uses virgin wood as feedstock. Although different bioenergy retrofit technologies for production of liquid, solid, and gaseous bioenergy products have been applied in the existing P&P mills, the number of installations remains small. The lack of profound knowledge of existing bioenergy retrofits hinders the replication and market uptake of potential technologies. This review synthesises the existing knowledge of European installations and identifies the key drivers and barriers for implementation to foster the market uptake of potential technologies. The bioenergy retrofits were reviewed in terms of technical maturity, drivers, barriers and market potential. Based on this evaluation, common drivers and barriers towards wider market uptake were outlined from political, economic, social, technical, environmental, and legal perspective. Technologies already commercially applied include anaerobic fermentation of sludge, bark gasification, tall oil diesel and bioethanol production, whereas lignin extraction, biomethanol production, hydrothermal liquefaction and hydrothermal carbonization are being demonstrated or first applications are under construction. The findings of this review show that a stable flow of residues at P&P mills creates a solid base for retrofitting. New innovative bio-based products would allow widening the companies' product portfolios and creating new businesses. Also, European Union's (EU) legislation drives towards advanced biofuels production. Wider uptake of the retrofitting technologies requires overcoming the barriers related to uncertainty of economic feasibility and unestablished markets for new products rather than technical immaturity. Publishers version

The pulp and paper (P&P) sector is a dynamic manufacturing industry and plays an essential role in the Austrian economy. However, the sector, which consumes about 20 TWh of final energy, is responsible for 7% of Austria’s industrial CO2 emissions. This study, intending to assess the potential for improving energy efficiency and reducing emissions in the Austrian context in the P&P sector, uses a bottom-up approach model. The model is applied to analyze the energy consumption (heat and electricity) and CO2 emissions in the main processes, related to the P&P production from virgin or recycled fibers. Afterward, technological options to reduce energy consumption and fossil CO2 emissions for P&P production are investigated, and various low-carbon technologies are applied to the model. For each of the selected technologies, the potential of emission reduction and energy savings up to 2050 is estimated. Finally, a series of low-carbon technology-based scenarios are developed and evaluated. These scenarios’ content is based on the improvement potential associated with the various processes of different paper grades. The results reveal that the investigated technologies applied in the production process (chemical pulping and paper drying) have a minor impact on CO2 emission reduction (maximum 10% due to applying an impulse dryer). In contrast, steam supply electrification, by replacing fossil fuel boilers with direct heat supply (such as commercial electric boilers or heat pumps), enables reducing emissions by up to 75%. This means that the goal of 100% CO2 emission reduction by 2050 cannot be reached with one method alone. Consequently, a combination of technologies, particularly with the electrification of the steam supply, along with the use of carbon-free electricity generated by renewable energy, appears to be essential.

The main aim of the study was to assess the environmental performance, through the application of the life cycle assessment, of a recycled paper production process focusing on the energy aspect. The production process occurred in a paper mill that produces packaging paper using paper and cardboard from source separation of municipal solid waste as raw materials. Two scenarios (S1 and S2) were defined by their energy supply sources. A cogeneration (CHP) system using natural gas for the combined production of thermal and electric energy was the source in S1. The Italian electricity grid (using the Italian country mix) and a natural gas boiler were the separate sources for electric and thermal energy, respectively, in S2. Finally, in order to evaluate the environmental effects on the results of the study about the variation in the natural gas supply source, four alternative Italian import mixes (M1, M2, M3, and M4) were defined by varying the contribution of the supplier countries. The environmental impacts were evaluated with ReCiPe 2016 (H) using both midpoint and endpoint approaches. The results showed that for both the scenarios, the energy consumption was the main cause of impacts mainly because of the natural gas contribution. The presence of the cogeneration (CHP) system generated significant environmental benefits compared with the use of energy provided by more conventional sources. The production and use of chemicals as well as the disposal of waste produced during the paper production were other environmental hotspots. The variation in the composition of the Italian import mix of natural gas, in terms of the supplier country’s contribution, had a significant influence on the results. The import of natural gas from Russia was the most impactful option. Since Russia is the country that contributes to the Italian import mix the most, in the next years, the use of natural gas in Italy could become increasingly impactful. Therefore, the replacement of natural gas with renewable sources is an urgent priority.

International audience; The hemp plant Cannabis sativa Linn, referring to industrial hemp, is a high-yielding annual industrial crop grown providing fibers from hemp stalk and oil from hemp seeds. Although hemp is a niche crop, hemp production is currently undergoing a renaissance. More than 30 countries grow hemp, with China being the largest hemp producing and exporting country. Europe and Canada are also important actors in the global hemp market. Traditionally, hemp as a fiber plant has been used for the production of apparels, fabrics, papers, cordages and building materials. The hurds, as waste by-product of fiber production, were used for bedding of animals, the seeds for human nutrition, e.g., as flour, and the oil for a wide range of purposes, from cooking to cosmetics. Hemp has also been an important crop throughout human history for medicine. Other more recent applications include materials for insulation and furniture, automotive composites for interior applications and motor vehicle parts, bioplastics, jewelry and fashion sectors, animal feed, animal bedding, and energy and fuel production. Foods containing hemp seed and oil are currently marketed worldwide for both animal and human nutrition. They also find applications in beverages and in neutraceutical products. Hemp oil is also used for cosmetics and personal care items, paints, printing inks, detergents and solvents. It is estimated that the global market for hemp consists of more than 25,000 products. Currently, the construction and insulation sector, paper and textile industries, and food and nutrition domains are the main markets while the cosmetics and automotive sector are growing markets. Innovative applications, e.g., in the medical and therapeutic domains, cosmeceuticals, phytoremediation, acoustic domain, wastewater treatment, biofuels, biopesticides and biotechnology, open new challenges. Hemp is also the object of numerous fundamental studies. This review presents and discusses the traditional and new uses of industrial hemp.

The economic feasibility of retrofitting an amine based post-combustion CO2 capture process to an existing Kraft pulp mill and an existing integrated pulp and board mill has been assessed. This study builds on the technical assessment of the energy performance of the mills when retrofitting a post-combustion CO2 capture process by Onarheim et al. (2017). Between 75 to 100% of the CO2 emissions from the pulp and paper industry originate from the combustion of biomass. If the raw material is sourced sustainably, these emissions are categorized as carbon neutral. Applying sustainably managed biomass in the pulp and paper processes and capturing the resulting CO2 for permanent storage enables the industry to go carbon negative. In this study, the economic impact of retrofitting CO2 capture from the flue gases of the recovery boiler, the multi-fuel boiler and the lime kiln were assessed. The levelized cost of pulp and the cost of CO2 avoided were evaluated based on six different scenarios varying the CO2 tax, incentives for renewable electricity production, with and without recognizing biogenic CO2 emissions as neutral (exempting CO2 emissions from tax or not), and rewarding captured and permanently stored CO2 with negative emissions credit. Results show that the pulp and paper industry has a potential for realizing feasible implementation of large-scale industrial Bio-CCS. For cases where 60-90% of total site CO2 emissions are captured, the cost of avoided CO2 amounts to 52-66/t for the Kraft pulp mill and 71-89/t for the integrated pulp and board mill. The cost of avoided CO2, and thus the realization of Bio-CCS in the pulp and paper industry, is strongly dependent on prevailing policy frameworks such as the EU ETS. In order to reach a levelized cost of pulp similar to the reference mill without CO2 capture, a negative CO2 emission credit of 60-70/t CO2 for the Kraft pulp mill and 70-80/t CO2 for the integrated pulp and board mill will be required. As long as biogenic CO2 emissions that are captured and permanently stored are not recognized as negative and rewarded accordingly there is no economic incentive for the owners of pulp and paper mills to implement CCS. The only way to get the pulp and paper industry to implement and deploy Bio-CCS will need the support of the decision-makers in promoting the right policy framework and regulations to encourage the investment such as strong incentives for negative emissions which are bankable during the long term operation of the mills.

H. Koga, N. Namba, T. Takahashi, M. Nogi, Y. Nishina. Renewable Wood Pulp Paper Reactor with Hierarchical Micro/Nanopores for Continuous‐Flow Nanocatalysis. ChemSusChem 2017, 10, 2560. https://doi.org/10.1002/cssc.201700576., Continuous-flow nanocatalysis based on metal nanoparticle catalyst-anchored flow reactors has recently provided an excellent platform for effective chemical manufacturing. However, there has been limited progress in porous structure design and recycling systems for metal nanoparticle-anchored flow reactors to create more efficient and sustainable catalytic processes. In this study, traditional paper is used for a highly efficient, recyclable, and even renewable flow reactor by tailoring the ultrastructures of wood pulp. The “paper reactor” offers hierarchically interconnected micro- and nanoscale pores, which can act as convective-flow and rapid-diffusion channels, respectively, for efficient access of reactants to metal nanoparticle catalysts. In continuous-flow, aqueous, room-temperature catalytic reduction of 4-nitrophenol to 4-aminophenol, a gold nanoparticle (AuNP)-anchored paper reactor with hierarchical micro/nanopores provided higher reaction efficiency than state-of-the-art AuNP-anchored flow reactors. Inspired by traditional paper materials, successful recycling and renewal of AuNP-anchored paper reactors were also demonstrated while high reaction efficiency was maintained.

Due to the health and environment impacts of fossil fuels utilization, biofuels have been investigated as a potential alternative renewable source of energy. Bioethanol is currently the most produced biofuel, mainly of first generation, resulting in food-fuel competition. Second generation bioethanol is produced from lignocellulosic biomass, but a costly and difficult pretreatment is required. The pulp and paper industry has the biggest income of biomass for non-food-chain production, and, simultaneously generates a high amount of residues. According to the circular economy model, these residues, rich in monosaccharides, or even in polysaccharides besides lignin, can be utilized as a proper feedstock for second generation bioethanol production. Biorefineries can be integrated in the existing pulp and paper industrial plants by exploiting the high level of technology and also the infrastructures and logistics that are required to fractionate and handle woody biomass. This would contribute to the diversification of products and the increase of profitability of pulp and paper industry with additional environmental benefits. This work reviews the literature supporting the feasibility of producing ethanol from Kraft pulp, spent sulfite liquor, and pulp and paper sludge, presenting and discussing the practical attempt of biorefineries implementation in pulp and paper mills for bioethanol production.

Today, there are many recent developments that focus on improving the electric vehicles and their components, particularly regarding advances in batteries, energy management systems, autonomous features and charging infrastructure. This plays an important role in developing next electric vehicle generations, and encourages more efficient and sustainable eco-system. This paper not only provides insights in the latest knowledge and developments of electric vehicles (EVs), but also the new promising and novel EV technologies based on scientific facts and figures—which could be from a technological point of view feasible by 2030. In this paper, potential design and modelling tools, such as digital twin with connected Internet-of-Things (IoT), are addressed. Furthermore, the potential technological challenges and research gaps in all EV aspects from hard-core battery material sciences, power electronics and powertrain engineering up to environmental assessments and market considerations are addressed. The paper is based on the knowledge of the 140+ FTE counting multidisciplinary research centre MOBI-VUB, that has a 40-year track record in the field of electric vehicles and e-mobility.

Increasing energy demand, together with environmental concerns, results in a significant tendency toward the research and development of renewable systems and particularly solar energy. Locating in the sunbelt of earth, Iran has great solar potential. However, due to the noticeable amount of dust activities in the Middle East, there are several challenges in the way of development of the photovoltaic systems. The current article provides a comprehensive literature review on the photovoltaic status in Iran regarding the climate conditions, photovoltaic development potentials, energy policies within the country, and photovoltaic experiences. A regionally focused review of the conducted works is provided to investigate the effect of dust activities on the output performance of photovoltaic systems. A focus on dust origins, frequency, and specifications is a priority in order to analyze its impacts on the performance of photovoltaic systems. Furthermore, a review of cleaning methods to overcome the dust deposition problem is provided. The comprehensive literature review conducted in this article is represented to researchers, designers, and engineers dealing with photovoltaic systems in regions with dust problems such as the Middle East and particularly Iran.

Renewable energy production throughout low-voltage grids has gradually increased in electrical distribution systems, therefore introducing small energy producers - prosumers. This paradigm challenges the traditional unidirectional energy distribution flow to include disperse power production from renewables. To understand how energy usage can be optimized in the dynamic electrical grid, it is important to understand the behavior of prosumers and their impact on the grid’s operational procedures. The main focus of this study is to investigate how grid operators can obtain an automatic data-driven system for the low-voltage electrical grid management, by analyzing the available grid topology and time-series consumption data from a real-life test area. The aim is to argue for how different consumer profiles, clustering and prediction methods contribute to the grid-related operations. Ultimately, this work is intended for future research directions that can contribute to improving the trade-off between systematic and scalable data models and software computational challenges. This work is financially supported by the Danish project RemoteGRID, which is a ForskEL program under Energinet.dk with grant agreement no. 2016-1-12399.

Anaerobic digestion is a well-established biological process for converting biomass in waste streams into a renewable energy source, and it also contributes to the treatment of these waste streams. In this introductory mini-review, some fundamental aspects of anaerobic digestion for use in the pulp and paper industry and other sectors are briefly summarized. The contents include the basics of anaerobic digestion, feedstocks, key process parameters, and typical anaerobic digesters/reactors and their representative manufactures. Fostering the more efficient and widespread commercial use of anaerobic digestion technologies would be a critical strategy to address the issues of energy, the environment, and sustainability.

The electrical grid is facing several challenges. On the energy generation side is the decentralized power generation in solar parks, wind parks or residential solar panels which all result in a time variable power generation. On the load side there are the challenges of controllable loads and the electromobility with its high demands to the grid. In addition to these technical challenges there is the political will towards renewable energy generation and the need for a smart grid. The orchestration of controllable loads with variable power generation could alleviate the problems. In this paper two approaches of how to orchestrate the controllable loads with the variable power generation are described: a centralized and market driven approach from the research project C/Sells and a decentralized approach from the research project LAGE-EE.

A series of bio-based additives derived from citric acid as a renewable chemical source were synthesised. The chemical composition and purity of 1–4 were confirmed by the combination of NMR, FTIR and MS. The thermal behaviour, stability and degradation pattern of the compounds 1–4 were investigated by TGA and DSC methods. PVC based formulations with compounds 1–4 were prepared through a simple mixing method. The formulations were treated at different temperatures (130–210 °C) to investigate the potential of these materials in industrial curing settings. L*a*b* data were used to monitor and to assess a colour change in the coated paper samples; this showed a correlation with degradation data of the pure compounds 1–4. SEM analysis of the final paper samples indicated that the compounds 1–4 show gas formation within the cellular structure; however compounds 3 and 4 result in a glossy smooth surface. This study showed that the compounds 3 and 4 exhibit promising properties in PVC formulations for application in industrial settings.

Current energy shortage and environmental issues resulting from the use of fossil fuels have lead to exploitation of renewable energy resources that includes municipal waste and agricultural residues. These residues are available, indigenous and are environmental friendly but some can not be used directly in combustion process due high moisture content and low volumetric energy unless by briquetting. The study was undertaken to assess the combustion characteristic of binderless briquettes produced from waste paper and groundnut shell. Combustion characteristics investigated were ignition time, burning time, calorific values, burning rate, specific fuel consumption, fuel efficiency and water boiling time. The calorific values of the briquettes ranged from 19.51 - 19.92 MJ/kg, while the thermal efficiency ranges between 13.75 – 21.64%, other results shows that the average burning rate between 0.511 and 1.133 kg/hr and the specific fuel consumption ranges between 0.087 and 0.131 J/g. The recorded boiling time values were between 17.5 and 30.0 minutes for cold start and 15.0 and 20.0 minutes for hot start. The results shows that waste paper and groundnut shell up to 25% in composition composite briquettes were found to have good combustion characteristics which qualify them as alternative to firewood for domestic and industrial energy. However, production of briquettes from waste paper and groundnut shell at mixing ratio of 85:15 was found to comparatively better from all experiment conducted.

The document summarizes the discussions held during a workshop on the energy transition, organized by several Belgian academic and industrial experts. All the questions raised above are addressed in a general way, trying to express and justify the different points of view, starting from works published in the literature.

Reducing “energy waste” has helped manufacturing companies to systematically improve their productivity. However, optimization goals related to the resource energy (energy efficiency, demand side management, integration of renewables) are still addressed in an isolated manner. Here we present a stepwise methodology on how to unite the different facets of energy usage in a factory planning process. Our results indicate that addressing the energy related planning goals in an integrated manner helps to reduce both life cycle costs and the environmental impact of factories. Future research will refine the presented planning framework and quantify the correlation between conventional and energy related planning targets.

Gasification of biomass is an industrial process utilized to produce product gas that can be used in electrical power generation with internal combustion engines. However, there remain huge challenges with regards to tar and other pollutants, thus their removal before further use is necessary. Non-thermal plasma method can be considered as a novel and efficient way for treatment of tar from product gas. In this work, a laboratory-scale, reverse vortex flow gliding arc plasma reactor was developed and tested for the removal of tar model compound using naphthalene as surrogate. Effects of total gas feed rate in the range of 20–60 L/min, applied voltage in the range of 50–220 V, hence, power input in the range of 300–460 W with initial naphthalene concentration of 610 ± 50 mg/m3 on removal and energy input were investigated. It was found the tar removal efficiency increased with increasing applied voltage. Maximum naphthalene removal efficiency of 85% was achieved at applied high voltage of 15 kV and specific energy input of 0.13 kWh/m3 with energy utilization efficiency of about 4.60 g/kWh. From the findings, non-thermal plasma technology appeared to offer great potential in the removal of biomass tar from gasification. The technology may be promising for possible application to real biomass tar cracking and upgrading of product gas from gasification.

This is a paper delivered to a forum organised by the Royal Society of NSW (in conjunction with the four academies) titled "The future of rationality in a post-truth world." The world faces an existential threat from climate change and the transition to clean, renewable energy is front and centre of global hopes for avoiding some of the worst forecasts. Today, Australia has no peak national body or commission for climate change. Yet thanks to the efforts of four cross bench politicians whose votes were courted by an appeasing government, we have a Commissioner for Wind Farms. The National Health and Medical Research Council has no dedicated program of research focussed on climate change, but it has a dedicated research program on wind farm disease. Some 25 reviews published since 2003 have concluded that there is very weak evidence for any direct effects on health of wind turbine exposure, but good evidence of small numbers in some exposed communities being “worried sick”. My presentation will discuss psychogenic illness and wind farms and the effort of their opponents to spread scientific claptrap. These efforts have seen 3 Senate and 2 state parliamentary enquiries in 5 years to what is a non-disease and retarded Australia’s embrace of wind energy while many nations have greatly accelerated their roll-out.

Will climate change stay below the 2 degree target in the 21st century on the basis of the COP 21 results? Looking into challenges and opportunities, this paper answers: To stay below the global 2dt is neither a real choice for the world society nor for businesses and civil societies in specific countries. It is a global guideline, scientifically developed for global negotiations, which should be broken down to national interests and actors. Key questions concerning the energy sector from the perspective of national interests are how to create and sustain a momentum for the inevitable energy transition, how to encourage disruptive innovations, avoid lock in effects, enable rapid deployment of energy efficiency and renewable energies etc. Or in other words: how to get to a competitive, economically benign, inclusive, low carbon and risk minimising energy system. With this background the paper argues that "burden sharing" is a misleading perception of strong climate mitigation strategies. It is more realistic to talk about "benefit sharing", using the monetary benefits and co-benefits of climate mitigation (e.g. energy cost savings, revenues from CO2-tax or emission trading systems) to help vulnerable national and international actors to adapt to the unavoidable climate risks. It has to be demonstrated on country level that the technologies and policy mix of strong climate mitigation and risk-minimising actions are indeed "benefit sharing" strategies which should be chosen anyhow, even if there was no climate change. For China and Germany this paper includes basic findings supporting this view. Bleibt nach den Beschlüssen von COP 21 der Klimawandel im 21. Jahrhundert unter dem 2 Grad Ziel? Dieses Papier argumentiert: Unter dem 2 Grad Ziel zu bleiben ist weder in globaler noch in nationaler Hinsicht ein reales Aktionsziel. Es handelt sich um eine globale Zielorientierung, die auf Basis bestmöglicher wissenschaftlicher Analysen für ein weltweites Klimaschutzregime entwickelt worden ist, aber auf nationale Interessen, Strategien und Akteure heruntergebrochen werden muss. Aus nationaler Perspektive ist zu fragen, wie eine Dynamik in Richtung der ohnehin notwendigen Transformation des Energiesystems erreicht werden kann: Wie können Innovationen ermutigt, Lock-in Effekte vermieden und die focierte Markteinführung von Effizienz und Erneuerbaren beschleunigt werden, um auf eine risikominimales Energiesystem rascher umzusteuern? Das Papier argumentiert, dass "Burden Sharing" eine irreführende Wahrnehmung dieses Transformationsprozesses darstellt. Es handelt sich vielmehr um einen komplexen Prozess des "Benefit Sharing", der mit einschließt, dass besonders verwundbaren Ländern und Akteuren die Anpassung an den unvermeidlichen Klimawandel erleichtert wird. Insofern gilt es nach COP 21 primär durch System- und Szenarienanalysen zu demonstrieren, dass nationale Strategien und Techniken des Klimaschutzes und der Risikominimierung ohnehin implementiert werden sollten, auch wenn es den Klimawandel nicht geben würde. Am Beispiel China und vor allem der Energiewende in Deutschland werden diese Thesen konkretisiert.

In this study, the environmental impacts of three ibuprofen production routes, namely, the BHC, the Bogdan, and the newly developed enzymatic synthetic routes (modified Bogdan process), are assessed and compared by the application of life cycle assessment (LCA). Based on the data obtained through literature and laboratory-based experiments, a pilot-scale production with a capacity of 500 g/day of ibuprofen was simulated to generate inventory data for the LCA study, using Aspen Plus V11. The well-established BHC process was chosen as the benchmark to quantify the operational and environmental benefits of the innovative enzymatic Bogdan flow synthetic process. The comparison highlights the benefit of adopting the modified Bogdan synthesis route via an enzymatic catalyst. Results show that a general reduction of environmental impact is achievable across the whole set of impact categories of the analysis, and the magnitude of such reduction depends on the efficiency of recycling in the production system. Considering a 50% efficiency of recycling, the modified Bogdan system achieves lower environmental impacts in some impact categories like Acidification, Ecotoxicity of freshwater, Human toxicity, Particulate matter, and Resource depletion (mineral, fossils, renewables) while having higher impacts on the rest of the impact categories. Yet, the new process proposed here scores better environmental performances in all of the impact categories when the enzyme recycling is close to 100%, which is promising for future technology development.

Pulp and paper industry is facing challenges such as resource scarcity and greenhouse gas (GHG) emissions. The objective of this research is to investigate whether the use of new coatings (micro or nano TiO(2)) and different pulp types could bring savings in wood, energy, GHG emissions and other environmental impacts in comparison with conventional printing and writing paper. We studied three types of pulp, namely i) unbleached virgin kraft pulp, ii) recovered fiber, and iii) high yield virgin chemithermo-mechanical pulp (CTMP). A life cycle assessment (LCA) was conducted from cradle to grave. Applying attributional modeling, we found that wood savings amount to 60% for the nanoparticle coated recovered fiber paper and 35% for the micro TiO(2) coated CTMP paper. According to the ReCiPe single score impact assessment method, the new product configurations allow the reduction of the environmental impacts by 10-35% compared to conventional kraft paper. Applying consequential modeling, we found larger energy and GHG emission savings compared to attributional modeling because the saved wood is used for producing energy, thereby replacing fossil fuels. The nanoparticle coated recovered fiber paper offered savings of non-renewable energy use (NREU) by 100% (13GJ/ton paper) and GHG emission reduction by 75% (0.6 tonCO(2)eq./ton paper). Micro TiO(2) coated CTMP paper offered NREU savings by 25% (3GJ/ton paper) and savings of GHG emissions by 10% (0.1 tonCO(2)eq./ton paper). The taking into account of all environmental impacts with the ReCiPe single score method leads to comparable results as that of attributional modeling. We conclude that the nanoparticle coated recovered fiber paper offered the highest savings and lowest environmental impacts. However, human toxicity and ecotoxicity impacts of the nanoparticles were not included in this analysis and need further research. If this leads to the conclusion that the toxicity impacts of the nanoparticles are serious, then the CTMP paper with micro TiO(2) coating is the preferred option.

Background The objective of this study was to evaluate the environmental impact of the production of a range of liquid biofuels produced from the combination of fermenting sorghum stalk juice (bioethanol) and the pyrolysis/hydrotreatment of residual bagasse (renewable gasoline and diesel). Life cycle impact assessment (LCIA) was performed on a farm-to-wheels system that included: (i) sorghum farming, (ii) juice extraction, (iii) juice fermenting, (iv) bagasse pretreatment, (v) bagasse thermochemical treatment (pyrolysis, hydroprocessing, and steam reforming), and (vi) typical passenger vehicle operation. LCIA results were compared to those of petroleum fuels providing the equivalent functional unit—cumulative kilometers driven by spark ignition direct injection (SIDI) vehicles utilizing either renewable gasoline or ‘bioE85—a blend of bioethanol and renewable gasoline,’ and a compression ignition direct injection (CIDI) vehicle utilizing renewable diesel produced from 76 tons of harvested sweet sorghum (1 ha). Results Sweet sorghum biofuels resulted in a 48% reduction climate change impact and a 52% reduction in fossil fuel depletion. Additionally, reduced impacts in ozone depletion and eutrophication were found (67% and 47%, respectively). Petroleum fuels had lower impacts for the categories of non-carcinogenic health impact, smog, respiratory effects, and ecotoxicity, showing tradeoffs between sorghum and petroleum fuels. Conclusion Overall, sorghum biofuels provide advantages in environmental impact categories including global warming potential, fossil fuel depletion and eutrophication, showing potential for sorghum as a promising second-generation feedstock for fuel.

Thin Pale Crepe (TPC) products are currently increasing in demand by rubber product manufacturers. Its production process is relatively more efcient than crumb rubber, which is Indonesia’s main product. The drying of TPC products still uses air drying from the burning of rubberwood. The use of rubberwood is predicted to be less economical in the future. With an increasing limited natural forest, rubberwood will be an alternative substitute for wood from natural forests. As a result, the economic value of rubberwood will be even greater which will have an impact on the increasing cost of TPC products if it continues to use rubberwood as fuel. Therefore, we need an alternative to rubberwood as an energy source for drying TPC. Sunlight can be an alternative source of energy that can be maximized for the drying process of natural rubber, including in TPC production. This research was conducted in two stages, namely 1) the production of TPC using latex from various clones with several additive dosages, and 2) TPC drying using various renewable energy sources. The results of research activities are in the form of a technology package regarding the TPC production process using renewable energy sources. The results showed that the TPC products produced with various treatments fulflled SNI 1903-2000. The three clones (BPM 24, PB 260, and GT 1) were able to produce TPC with bright yellow color.

The valorisation of lignin is being increasingly recognised to improve the economics of pulp and paper making mills. In the present study, an integrated lignin–glycerol valorisation strategy is introduced with an overarching aim for enhancing the process value chains. LignoBoost kraft lignin was subjected to base-catalysed depolymerisation using glycerol as a co-solvent. The generated bio-oil was used as a renewable additive to biodiesel for enhancing its oxygen stability. The influence of three independent parameters including temperature, time and glycerol amount on lignin depolymerisation was investigated. Response surface methodology was applied to design the experiments and to optimise the process for maximising the yield and antioxidant impact of bio-oil. The results showed that glycerol has a positive qualitative and quantitative impact on the produced bio-oil, where an enhancement in the yield (up to 23.8%) and antioxidant activity (up to 99 min induction period) were achieved using the PetroOxy method (EN16091). The addition of 1 wt% bio-oil to biodiesel has led to an improvement in the oxidation stability over a neat sample of up to ∼340%, making it compliant with European standard (EN14214). The proposed process presents a biorefinery paradigm for the integrated utilisation of waste cooking oil, lignin and glycerol.

In this paper, two biomass that are abundantly available in Malaysia, namely empty fruit bunch and durian rinds were investigated for bio-char production through pyrolysis process. Both biomass was mixed at different ratio and subjected to a temperature of 325 °C with a holding time of 2 h and 5 °C/min heating rate. The raw mixed biomass was characterised using a Thermogravimetric Analyser (TGA) and the energy content of biomass and produced bio-char was determined using a bomb calorimeter. It was found that the char of 90% empty fruit bunch and 10% durian rinds mixture yielded the highest energy content of 10.3 MJ. The bio-char yield was 41% with a heating value of 25.14 MJ/Kg. Conversion of mixed biomass waste into solid bio-char showed an improvement in the char yield and energy content. The bio-char was then pelletised using corn starch as an adhesive. Addition of 1% corn starch as adhesive to the bio-char yielded pellets with a heating value of 22.37 MJ/kg. The pellets are stable and could be easily handled, transported and stored compared to the bio-char itself. This research is significant in respect to biomass waste reduction and generation of environmental friendly and effective solid biofuel.

The paper is an overview of Daniel Nocera’s work towards obtaining energy from the splitting of water. The review describes the challenge of storing high energy bonds and presents some of the important advances the researcher managed to accomplish.

Fossil fuel depletion and pollution are calling for alternative, renewable energies such as biofuels. Actual challenges include the design of efficient processes and catalysts to convert various feedstocks into biofuels. Here, we review nanoferrites heterogeneous catalysts to produce biodiesel from soybean and canola oil. For that, transesterification is the main synthesis route and offers simplicity, cost-effectiveness, better process control, and high conversion yield. Catalysis with nanoferrites and composites allow to obtain yields higher than 95% conversion with less than 5.0 wt.% of catalyst loading at 80 °C in 1–2 h. More than 90% conversion yields can be achieved with a moderate alcohol/oil molar ratio, i.e., between 12:1 to 16:1. Catalyst recovery is easy due to the magnetic properties of nanoferrite, which can be effectively reused up to 4 times with less than 10% loss of catalytic efficiency.

Algeria’s energy demands are tremendously growing, and on the African continent it ranks among the countries with the highest energy consumption. To counter its growing energy demand, the country is progressively adopting renewable energy technologies, although conventional energy technologies still play a central role in its electricity production. The huge solar energy potential in Algeria can be exploited and utilized to meet the country’s growing energy demand with minimal greenhouse gas production. Given that concentrating solar power is viewed as one of the most promising alternatives in the field of solar energy utilization, this study investigates the viability of a 100 MW parabolic trough-based power plant at Tamanrasset, Algeria. The plant was simulated in the System Advisor Model software considering the actual electricity load profile of the targeted location and implementing two different condenser types: evaporative and air-cooled. By comparing the plant’s electricity production to the city’s real load, the plant was in position of supplying about 78% and 60% of the city’s electricity demand during the winter and summer seasons, respectively. The results show that implementation of such CSP plants could play an important role in meeting the energy demand as well as mitigating climate change through greenhouse emissions avoided in electricity generation process.

Renewable carbon sources are a rapidly growing field of research because of the finite supply of fossil carbon. The lignocellulosic biomass walnut shell (WS) is an attractive renewable feedstock because it has a high lignin content (38-44 wt %) and is an agricultural waste stream. Lignin, a major component of lignocellulosic biomass that is currently a waste stream in pulping processes, has unique potential for chemical upgrading because its subunits are aromatic. In the interest of improving the sustainability and reducing the environmental impact of biomass processing, valorization of agricultural waste streams is important. Herein, three lab-scale, batch organosolv procedures are explored in the interest of optimal isolation of protected WS lignin (WSL). One system uses acetic acid, one MeOH, and the final EtOH as the primary solvent. The optimal condition for protected WSL isolation, which resulted in a 64% yield, was methanol and dilute sulfuric acid with formaldehyde to act as a protecting group at 170 °C. Select samples were upgraded by hydrogenolysis over a nickel catalyst. Protected lignin recovered from the optimal condition showed 77% by weight conversion to monomeric phenols, demonstrating that the protected WSL can selectively afford high value products. One key finding from this study was that MeOH is a superior solvent for isolating WSL versus EtOH because the latter exhibited lignin recondensation. The second was that the Ni/C-catalyzed reductive catalytic fractionation (RCF) directly of WS biomass was not selective relative to RCF of isolated WSL; conversion of raw WS to monomers produced significantly more side products.

The enormous inroads made by renewable energy in recent years have been the key to the development of new technologies designed to obtain energy from a range of resources. Hydrokinetic microturbines used to harness kinetic energy from rivers, tidal and marine currents epitomize such developments. As the reservoir is dispensed with, the water footprint normally associated with conventional hydroelectric generation is minimized. The new prototypes being developed require laboratories with water tunnel infrastructures where they can be accurately reproduced under controlled conditions. However, the construction of a water tunnel demands considerable investment, which prevents many research groups from completing their prototype design work. This paper charts the design of a low-cost hydrodynamic water tunnel at the University of Oviedo, indicating the mechanical and electronic elements as well as the software developments that make up the facility. This construction is a part of a research strategy focused on making the study of new hydrokinetic microturbines designs economically feasible. Moreover, it includes a description of a special software application used to perform the characterization of a hydrokinetic microturbine model in the water tunnel and a demonstration of the scope of the facility in the experimental study of a unit with a Darrieus rotor. Graphic abstract

In Latin America, the energy potential from sugarcane straw, such as tops, secondary stalk, and leaves, has been debated, but the literature associated with organic crops and its implementation for energy purposes is limited. Sugarcane straw is either left in the field for soil recovery or used for animal feed. This paper presents an analysis of using organic sugarcane straw for energy generation. We have characterized the physicochemical properties of this organic sugarcane straw, including caloric value, moisture, carbon, and ash content, and have explored the environmental benefits of using biomass to replace coal as an energy source. The study showed that it is possible to achieve the replacement of coal using 16% of the residual biomass, with the benefit of generating lower CO2 emissions compared to coal combustion. Additionally, emissions derived from transporting the biomass from the field to the farm are 68% lower than those involved in transporting coal. The residual biomass from the organic crop showed similar properties relative to bagasse. The use of organic sugarcane straw biomass will result in the reduction of energy costs and will generate green energy with lower emission of CO2.

Conventional plastic products present a serious burden to the environment, especially during their end-of-life phase. To tackle the rapid growth in plastic production, use and pollution, it is desirable to produce plastic materials more sustainably. Amongst these plastic materials which could be produced sustainably are Melamine Etherified Resin (MER) fibres, which have a wide range of potential uses, such as in mobility, filtrations, for thermal protective clothing and other applications. This paper explores the potential for sustainable MER fibre production, where all the required feedstocks could be from either renewable or waste origin. To investigate more sustainable pathways, the conventional process is compared to two alternatives processes which utilize waste CO2 and wood-based methanol for formalin production. A comparative environmental impact assessment is conducted, where selected environmental footprints, potential environmental impacts and eco-costs are analysed based on 1 kg of produced MER fibres. Results show that greenhouse gas (GHG) footprint could be reduced by over 68% and human toxicity potential by over 75%, while eco-costs could be reduced by up to 44%. Moreover, the results present the first step towards producing MER fibres in a sustainable way, contributing to the circular economy.

Waste sunflower oil (WSO) can be easily produced as a reliable resource sustainable for multifunctional applications. WSO methanolysis in the presence of high silica zeolite beta (HSZB) treated with KOH as a catalyzer in a trans-esterification reaction was used for the fatty acid methyl ester (FAME) synthesis. Tetrahydrofuran (THF) as a co-solvent of 20 wt.% was added for mass transfer intensification. Conversion efficiency of 96.5% was obtained within 4 h reaction time of the reflux reaction, methanol:oil ratio of 9:1, 2 wt.% of catalyst and agitation speed of 300 rpm. Furthermore, these KOH treated HSZB catalysts still exhibit acceptable sustainability and appropriate catalysis in the trans-esterification after three consecutive cycling. It is concluded that K2O existing in the pores and the defect sites of the alkali-treated HSZB can be supplied to the surface of the catalysts structure during the trans-esterification in three consecutive rounds to result in 66.3% percentage of conversion.

Pellets are widely used for power generation because they use renewable raw material with easy storage, transport and high energy density. However, the structural fragility, disintegrating during handling, transport and storage, is one of the main problems of pellets, but the addition of binders/additives can minimize this fragility. The objective of this study was to evaluate the properties of wood pellets with the addition of starch (corn and wheat) and kraft lignin in different proportions. Pellets were produced with the addition of starch (wheat and corn) and kraft lignin in the proportions of 1, 2, 3, 4 and 5% in relation to the mass of wood particles of Pinus sp., with 12% moisture (dry basis), classified in 3 and 1 mm sieves and compacted in a pelleting press in the laboratory, according to European standard EN 14961-2. Physical and mechanical properties of the pellets were evaluated and their densitometric profiles obtained from the Faxitron LX-60 X-ray equipment. Corn starch and kraft lignin additives at 4% improved pellet properties (density, fines and hardness), reducing their losses during handling, storage and transport.

Microbial fuel cells (MFCs) are a green technology that can directly convert electrical energy from chemical energy contained in organic wastewater. Rice is the most popularly consumed food in Asia. Rice washing before cooking produces an enormous amount of domestic sewage. Rice washing wastewater (RWW) contains various organic matters, minerals, and vitamins. Therefore, in this study, we utilized RWW as biofuel to operate a floating MFC (FMFC). The FMFC was designed with the air-cathode floating on the biofuel and the anode immersed in the biofuel. This design enables the device to float on wastewater sources and to harvest electricity directly from that source. Baker’s yeast and bacteria existing in a natural pond (natural bacteria) were used as biocatalysts. Experimental results showed that the FMFC could generate electricity from RWW using both the baker’s yeast and natural bacteria. The maximum power density ow the FMFC using the baker’s yeast was 1 mW/m2.

The objective of the research was to produce biogas by anaerobic co-digestion of biomass and urban solid waste, which made it possible to take advantage of these organic wastes, transforming them into a renewable energy source such as biogas being a fuel with an high calorific on an average of 19.6 to 25 MJ/m3. The methodology consisted of developing different experiments to evaluate the biogas performance in each of the selected biomasses. The percentage of CH4 and CO2 was determined by gas chromatography, from which the following results were obtained: by rinds of, potato (35.64% CH4), papaya (1.64% CH4), pineapple (0.11% CH4), pea (16.13% CH4), banana (0.39% CH4), bean (0.76% CH4), sugarcane bagasse (80.85% CH4), wet sugarcane bagasse (96.06% CH4), semi-dry sugarcane bagasse (91.39% CH4) and potato peel with sugarcane bagasse (58.74% CH4). After the methane quantification in the different codigestion, the sugarcane bagasse presented better results with a 15% increase in the generation of methane when it was pretreated. Subsequently, we worked with anaerobic biodigesters on a laboratory scale with 500 mL capacity, with a 75% feed (sediment, sugarcane bagasse and water 0.75: 1.5: 1.5). In experimentation 8 with 55% of methane and experimentation 9 with 32%, likewise the energy potential where 15.05 MJ/m3 in experimentation 8 and 16, 72 MJ/m3 in experimentation 9.

This article investigates the potential environmental impacts of four-layer printed circuit board (PCB) production from cradle to grave. The study starts with a lifecycle assessment of conventional PCB production. Then, the alternative materials of polyethylene terephthalate (PET), polylactic acid (PLA)/glass fiber composite and paper are investigated for the substrate. A conventional PCB adopts copper as the conductive material and requires an etching process. The environmental impacts of changing the conductive deposition method to an additive method by printing silver nanoparticles is studied. In a conventional PCB, electricity generation contributes 41% of the global warming potential (GWP) and 38% of the abiotic resource depletion (ADP), in the fossil category. By applying an additive manufacturing method, the GWP of PCB manufacturing can be reduced to 14% of that of the conventional method. A sensitivity analysis of silver recycling illustrates that a 40% higher silver recycling rate would decrease the GWP of silver material by about 48–60%. Uncertainty in the energy consumption of PCB production would alter the environmental impacts, however, even with the most conservative energy consumption in a conventional PCB production method, the environmental impacts of the additive method are about five times lower than those of conventional PCB production.

Recently, it has become imperative to find new sustainable and renewable sources of energy, in order to avoid dependence on non-renewable traditional energy resources. This would help to overcome the depleting of natural resources for energy production. Hydrogen gas production using biological processes is one of the most attractive solutions in this regard, due to its high energy content and ecofriendly nature. Production of hydrogen using single photo-fermentation process and landfill leachate as substrate was carried out in this paper, by utilizing batch bio-reactor and anaerobic conditions. The pH value and temperature, play an essential role in a bio-hydrogen production process. Thus, in this study, the pH values considered were 6, 6.5, and 7.2, respectively, at a controlled temperature of 37 ± 1°C. This study investigated various schemes that have the possibility of producing hydrogen using; landfill leachate alone, with leachate and addition of inoculum such as sewage sludge, and with substrate such as sucrose and glucose. All experiments were conducted with and without mixing, for effective comparative study. Heat and pH pretreatment were applied in each experiment with the objectives of decreasing the activities of methane-producing bacteria and enhancing the activities of hydrogen-producing bacteria. The hydraulic retention time used in this study was 48 h, in order to obtain optimal performance of the schemes employed. Analysis of liquid leachate was performed for each experiment, and based on the obtained results, the maximum yield of hydrogen produced was 5,754 ml H2/L, with a medium pH scale of 6.0, fermentation temperature of 37 ± 1°C and constant mixing speed of 100 rpm.

The integrated production of bioethanol and biogas makes it possible to optimise the production of carriers from renewable raw materials. The installation analysed in this experimental paper was a hybrid system, in which waste from the production of bioethanol was used in a biogas plant with a capacity of 1 MWe. The main objective of this study was to determine the energy potential of biomass used for the production of bioethanol and biogas. Based on the results obtained, the conversion rate of the biomass—maize, in this case—into bioethanol was determined as the efficiency of the process of bioethanol production. A biomass conversion study was conducted for 12 months, during which both maize grains and stillage were sampled once per quarter (QU-I, QU-II, QU-III, QU-IV; QU—quarter) for testing. Between 342 L (QU-II) and 370 L (QU-I) of ethanol was obtained from the organic matter subjected to alcoholic fermentation. The mass that did not undergo conversion to bioethanol ranged from 269.04 kg to 309.50 kg, which represented 32.07% to 36.95% of the organic matter that was subjected to the process of bioethanol production. On that basis, it was concluded that only two-thirds of the organic matter was converted into bioethanol. The remaining part—post-production waste in the form of stillage—became a valuable raw material for the production of biogas, containing one-third of the biodegradable fraction. Under laboratory conditions, between 30.5 m3 (QU-I) and 35.6 m3 (QU-II) of biogas per 1 Mg of FM (FM—fresh matter) was obtained, while under operating conditions, between 29.2 m3 (QU-I) and 33.2 m3 (QU-II) of biogas was acquired from 1 Mg of FM. The Biochemical Methane Potential Correction Coefficient (BMPCC), which was calculated based on the authors’ formula, ranged from 3.2% to 7.4% in the analysed biogas installation.

The rising amount of organic wastes (biomasses) generated annually constitute serious environmental concerns but hold enormous potentials in solving the increasing global energy demand. When properly harnessed, they are good renewable energy sources with capabilities of bridging the energy demand gaps and ameliorating environmental concerns of developing climes. In this study, the mixed-method approach of anaerobic digestion and thermogravimetry were used in the ranking of eighteen selected agro-industrial biomasses based on their energy (biomethane or thermochemical) conversion potentials. The ultimate and proximate properties of the substrates were determined, then the experimental biomethane potentials (BMP) were carried out via anaerobic digestion of feedstocks at mesophilic conditions for 30 days. The biomasses were also degraded thermally within a temperature range of 50 and 800 °C, torrefaction and the pyrolysis char yields were determined. The calorific values and the theoretical biomethane potentials (TBMP) were calculated from the elemental compositions of substrates. From the results obtained, lignocellulosic plant materials and the animal manures recorded lower methane yields and biodegradability. Although the animal manures had appreciable high heating values (HHVs), their BMP yields were poor with biodegradability as low as 25.8%. Consistent with agro-based biomasses, most of the biomass had low H/C eff , high H/C and O/C atomic ratios. Based on ranking criteria, waste samples from animal carcasses and oil crops were ranked topmost in both thermochemical and biochemical energy conversion. Co-digestion/degradation of high ranked biomass with others and enhancements of the substrate before energy conversion is recommended. Thermal upgrade of biomasses and co-pyrolysis with coal is also recommended.