Search

The fiber of paper mulberry, which is mostly grown in the East Asian region, varies in both length and width—even if from the same species—depending on the country, soil, and climate where it is grown. This accounts for differences in the quality of handmade paper between domestic and imported products. Once handmade paper is manufactured as sheets, its origin cannot be determined from a morphological perspective, regardless of macroscopic and microscopic observations. Therefore, this study attempted to determine the origin of Korean and imported products using mulberry bast fiber and handmade paper from a chemometrics perspective. The inorganic components of wood are absorbed from the soil and exist in the bark of trees; thus, metal and rare-earth elements in the bast fibers and handmade papers were quantitatively analyzed using inductively coupled plasma-atomic emission spectroscopy/mass spectrometry (ICP-AES/MS). Following this, a prediction model of their origin was constructed by applying multivariate statistical analysis, i.e., a partial least squares-discriminant analysis (PLS-DA) loading plot was constructed, which helped in identifying the discrimination factors resulting from their origin. According to the ICP-AES results, Pb was only detected in the Gyeongbuk Mungyeong dak sample of the Korean bast fibers. The Chinese bast fiber sample had high contents of Ca, and B and Zn were detected only in the Chinese bast fiber samples. Bast fiber samples from China, Japan, and Thailand showed relatively high contents of Al, Ca, and Na. Meanwhile, Cu and Zn were detected in the handmade paper manufactured from the imported materials. According to the ICP-MS results, among the Korean handmade papers, the products from Gyeongbuk Mungyeong, Andong, and Chungbuk Goesan exhibited a high U content and that from Gapyeong had high Sc, Rb, Sr, and Ba contents. Thus, the elemental analysis employed in this study effectively identified the origin of the papers. The origin prediction by PLS-DA for the domestic and imported products revealed an accuracy of 86.4% and 72.7% for ICP-AES and ICP-MS methods, respectively, which is deemed acceptable to assess the origin. We believe this method significantly contributes to determining the origin of paper mulberry bast fiber and handmade paper manufactured in East Asia.

The fibre characteristics of five Spondia mombin stands were studied to determine their suitability for pulp and paper production. Wood slivers obtained parallel to grain at three (3) different positions along the bole were macerated in combined identical amounts of glacial acetic acid plus hydrogen peroxide under heat at between 80-100o C. Macerated fibres were washed clean of mixture and mounted on slide for microscopic examination of fibre characteristics. Completely Randomized Design (CRD) was employed for the experiment. Data were analysed using one-way Analysis of Variance (ANOVA) while, the Duncan’s Multiple Range Test (DMRT) was used to separate means of significant differences among the treatments. Results show that significant differences existed in fibre characteristic of sampled trees, however the fibre length ranged from 0.98-1.0 mm, fibre diameter (18.22-21.47 um), lumen width (10.90-12.98 um) and cell wall thickness (3.86-4.60 um). Significant differences were also observed among the derived fibre characteristics, the Runkel ratio ranged from 0.66-8.89, elasticity coefficient (57.22-60.50 %), coefficient of rigidity (19.78-22.24 %), slenderness ratio (43.27-46.5). This implied that, the fibres of S. mombin were short and elastic which make the wood species an appropriate raw material for pulp and paper making especially when blended with other long fibre species.

Perforation is used in multilayer tissue products, such as toilet and kitchen papers, as part of the converting process. Perforation facilitates the detachment of consecutive sheets by the user. The compromise between the strength required to detach a perforated sheet and the strength required to break a sheet affects the perforation efficiency. In this work, the mechanical behaviors of 15 commercial papers from different European producers were studied. A morphological analysis of the materials was performed, followed by the determination of their perforation efficiency (through tensile tests). A qualitative analysis of the cuts quality, along with a quantitative analysis of the same cuts dimensions was performed through an optical system. Finally, the stress concentration in the holes and the influence of the cuts distance were analyzed using a finite element model implemented in Abaqus/Standard finite element software. The results showed that a cut distance of 2.0 mm should not be used in these types of papers, and the perforation efficiency increased with the cut distance, regardless of the number of plies in the toilet paper. The stress concentration factor was also determined to have a limit value of 0.11. Papers above this limit value tear at the perforation line, as desired.

This research is an analysis of quality control process on paper production on the soft roll production process of Bel Papyrus Ltd located in Ogba, Lagos State, Nigeria. The research was done with the aim of determining the conformity of the industry’s product to quality standard, identifying and eliminating the possible causes of variation in their production process, with reference to Percentage Elongation. The researchers used primary data in form of periodic laboratory test result done on soft rolls.Data presentations were made using simple statistical tools like Mean, Ranges, Standard Deviations, and Tables reflecting the primary data obtained at equal interval of production. The researchers made use of variable control charts for the purpose of analysis. The

High demands for trees as the raw material of paper can disrupt the stability of the environment. It is necessary to find alternatives from other materials which are more environmentally friendly. This study aims to determine the quality of paper made from combining sugarcane bagasse with cassava peels or with corn husks using PVAc or tapioca starch adhesives. A completely randomized 2 x 2 factorial design with five times replication was used. The parameters tested were the tensile and tear resistance of the paper using a micrometer and a universal testing machine. A sensory analysis from panelists was also conducted. The combination of J1P1 produced a paper with the highest tensile strength (11.30 MPa) and the highest tear strength (1.82 MPa). The combination of J2P2 produced a paper with the lowest tensile strength (10.35 MPa) and the lowest tear strength (1.62 MPa). Variance analysis showed that the type of adhesive used showed a significant result on both tensile and tear resistance but material choices and interaction between materials and adhesive choices was not significantly different from the result on both tensile and tear resistance. Sensory testing shows that the combination of J1P1 was preferred the most. It can be concluded that the combination of J1P1 appeared to be the best combination.Keywords: Handmade paper, sugarcane bagasse, cassava peels, corn husk, PVAc tapioca starch, adhesive

Our dependency towards wood has reduced the number of forests especially in Indonesia. Hence, many people tried to use another material as a replacement of wood. One of them is composite. Department of Industrial Engineering Universitas Sebelas Maret has developed paper-based composite using newspaper waste in Praktikum Perancangan Teknik Industri (PPTI) II. Unfortunately, the quality of composite is not so good. This paper tried to understand the effect of factors to responses and discover the best combination of factors to obtain the best responses. The responses of this experiment are tensile strength, bending strength and impact value. The factors of this experiment are paper pulp, PVAc glue and water. Taguchi method is used to find the appropriate orthogonal array and Particle Swarm Optimization method to find the optimum combination of the factors. Orthogonal array used in this experiment is L9 (34). Through analysis, all of the factors are significant to tensile and bending strength, but they are not significant to impact value. The best combination of factors is 175 grams paper pulp, 130 grams PVAc glue and 175 ml water. Optimum results obtained for tensile strength is 0.7595 N/mm2, bending strength is 4.873 N/mm2 and impact value is 0.0138 J/mm2.

A classical result of K. L. Chung and W. Feller deals with the partial sums S k S_k arising in a fair coin-tossing game. If N n N_n is the number of “positive” terms among S 1 S_1 , S 2 S_2 , …, S n S_n then the quantity P ( N 2 n = 2 r ) P(N_{2n} = 2r) takes an elegant form. We lift the restriction on an even number of tosses and give a simple expression for P ( N 2 n + 1 = r ) P(N_{2n+1} = r) , r = 0 r = 0 , 1 1 , 2 2 , …, 2 n + 1 2n+1 . We get to this ansatz by adaptating the Feynman–Kac methodology.

In this study, we evaluated the effect of bamboo bleached kraft pulp (BKP) on the strength of the coloring paper used for pear paper bags. The characteristics of bamboo BKP were measured to compare them with those of softwood BKP and hardwood BKP. Handsheets from bamboo and hardwood BKPs were prepared at various mixing ratios, and their strengths were then analyzed. After that, a mill trial was performed to produce a prototype of coloring paper with bamboo BKP, and the effect of bamboo BKP on the strength of the coloring paper was finally determined. The initial freeness and fiber shape of bamboo BKP were similar to those of hardwood BKP, although the average fiber length and curl of bamboo BKP were higher than those of hardwood. As the mixing ratio of bamboo BKP increased, the strength of the handsheets increased, indicating the enhancing effect of bamboo BKP on the strength of coloring paper. As a result of the mill trial of coloring paper in the specialty paper mill, it was found that the tensile strength increased by 27.8% and burst strength by 20.0% when bamboo chemical pulp replaced 20% of the hardwood chemical pulp. Therefore, it was concluded that bamboo chemical pulp can replace and improve the strength of hardwood chemical pulp for manufacturing coloring paper.

This study aims at understanding the role of the tools chosen throughout the processes of solving a non-routine mathematical problem and communicating its solution. In assuming that problem-solving is a synchronous activity of mathematization and expression of mathematical thinking we take our proposed Mathematical Problem Solving with Technology (MPST) model to analyze the processes of solving-and-expressing-problems. Resorting to qualitative methods for data collection and analysis, we report on the case of an 8th grader working on a covariation problem to examine the role that paper-and-pencil and digital tools play in the development of a conceptual model of the situation. We found that the resources used throughout the solving-and-expressing activity influenced the depth of the conceptual model developed, within a process of progressive mathematization. Whereas paper-and-pencil led to the emergence of a conceptual model based on exploring particular cases, the digital transformation of the solution was triggered by the process of communicating its mathematical justification and expanded the previous model. Moreover, the complexity of this activity is evidenced by its multiple sequences of processes. Finally, the integration process seems crucial as the concomitant use of technological and mathematical resources precedes major advancements in the expansion of the conceptual model.

In China, Xuan paper has been the paper of choice as artwork support and for conservation, for several centuries. However, little is known about its material properties, especially given the many grades of sized and unsized Xuan paper. In addition, there is a lack of information on its degradation. In this research, a selection of contemporary unsized Xuan papers was investigated, representing diverse raw materials. Seven out of twelve contemporary unsized Xuan papers were determined to be approximately neutral and contain > 2% alkaline reserve, indicating good durability. Viscometry was used to determine the degree of polymerisation (DP) as none of the samples gave significant reactions to the phloroglucinol spot test. The average DP of ten contemporary unsized Xuan papers is ~ 1700, excluding two papers that have presumably been sun-bleached, and that exhibit significantly lower DP. Using X-ray fluorescence, it can be demonstrated that Ca and Si are the dominant elements and interestingly, Ca content is directly correlated with ash content and with alkaline reserve. Accelerated degradation was performed at two sets of environmental conditions, i.e. 90 °C, 30% RH and 60 °C, 70% RH, and the established degradation rates agreed with the Collections Demography model of paper degradation meaning that degradation of Xuan papers proceeds in the same way as other types of paper. This research gives fundamental insights into contemporary unsized Xuan papers, which exhibit good stability during accelerated degradation despite the low starting DP in the context of the samples used in this study. Our findings may inform methods of Xuan paper production, selection of Xuan paper for conservation purposes, as well as preventive conservation of Xuan paper-based artefacts.

Uzbekistan is bare of forests and it takes the fifth place in the world in terms of cotton production, and the third place in terms of silk production after China and India. According to the government program the expansion of the land area for mulberry plantations boosts the growth of silk production causing an increase in the total amount of wastes, i.e. branches of mulberry trees industrially useless after the removal of leaves. Their use as a raw material for the cellulose pulp production is relevant, since it is aimed at solving not only the resource, but also the environmental problem. The bark was cut off from the mulberry branches and soaked in water for some time after which its exterior hard layer was scraped off and divided into the rough exterior layer and the softer inner layer. The inner layer was boiled for several hours. The boiled bast, after washing with water, was grinded in a laboratory grinding machine under the following conditions: mass concentration – 1 %, temperature – 22 °С. A given amount of lint cotton cellulose (grinding degree – 45 °SR) was added to the grinded bast. Paper molds with the mass of 80 g/m2 were obtained in laboratory conditions using a sheet-making apparatus. It was found out that the obtained paper that contains cotton cellulose pulp and inner layer of mulberry branch bark has low whiteness which depends on whiteness of the added fibers. It has been established that adding the cellulose pulp of the inner layer of mulberry branch bark at a grinding degree of 30 °SR contributes to the production of strong paper. It is recommended to add up to 30 % of cellulose pulp from the inner layer of mulberry branch bark to paper pulp as further addition adversely affects the paper whiteness.For citation: Babakhanova Kh.A., Galimova Z.K., Abdunazarov M.M., Ismailov I.I. Cellulose Pulp from Mulberry Branch Bark for the Paper Industry. Lesnoy Zhurnal [Russian Forestry Journal], 2020, no. 5, pp. 193–200. DOI: 10.37482/0536-1036-2020-5-193-200

Applying professional-vision skills to classroom situations depends on knowledge about what matters in these situations. In an experiment with 85 biology pre-service teachers, we investigated a 90-min intervention combining both acquisition and application of knowledge about tutoring. The interven-tion started with an introductory text, followed by classroom video examples. Students who read a text on concrete tutoring strategies made more references to pedagogical concepts in their analyses than students who read about generic video observational guidelines. We conclude that combining a short, focused theoretical introduction and video analysis is a promising method to broadly anchor professional-vision training within teacher education.(c) 2023 Elsevier Ltd. All rights reserved.

Objectives: The objective of the study was to study the compressive strength of the partially replaced paper mill waste in cement. Methods/ Statistical analysis: The concrete cube specimen were prepared for compressive strength test. In this study, the cement has been replaced with 20%, 30%, 40% and 50% of hypo sludge. The specimens were cured for two different ages (7 days and 28 days) and tested for compressive strength. The quadratic polynomial prediction equation was proposed using Response Surface Methodology (RSM). The prediction model was developed using the experimental output results. Thus, the prediction model facilitates the further research work to be conducted by researchers on paper mill waste replacement. The rate analysis was also further carried out to show the cost effectiveness of using the waste replacement in cement. Findings: The test was conducted on the compressive strength (7 days and 28 days) of control specimen (0%) and partial replacement of 20%, 30%, 40% and 50% of cement using the hypo sludge. Thus, 20% replacement of cement using hypo sludge has shown good compressive strength than the control specimen. The cost of 20% paper mill waste was less when compared to the cost of control specimen. Novelty/ Applications: The compressive strength of 20% partial replacement of paper mill waste in cement can be used in further construction. The prediction model can be used to predict the future compressive strength of partially replaced paper mill waste concrete. Keywords: Ordinary Portland cement; Paper mill waste; Hypo sludge; Partial replacement; RSM

Based on publications related to the use of micro- and nanofibrillated cellulose (MNFC) in papermaking applications, three sets of parameters (intrinsic and extrinsic variables, furnish composition, and degree of dispersion) were proposed. This holistic approach intends to facilitate understanding and manipulation of the main factors describing the colloidal behavior in systems comprising of MNFC, pulp fibers, and additives, which directly impact paper product performance. A preliminary techno-economic assessment showed that cost reductions driven by the addition of MNFC in paper furnishes could be as high as USD 149 per ton of fiber (up to 20% fiber reduction without adverse effects on paper’s strength) depending on the cost of papermaking fibers. It was also determined that better performance in terms of strength development associated with a higher degree of MNFC fibrillation offset its high manufacturing cost. However, there is a limit from which additional fibrillation does not seem to contribute to further strength gains that can justify the increasing production cost. Further research is needed regarding raw materials, degree of fibrillation, and combination with polyelectrolytes to further explore the potential of MNFC for the reduction of weight of paper products.

The need to account for potential losses in rare events is of utmost importance for corporations operating in the financial sector. Common measurements for potential losses are Value at Risk and Expected Shortfall. These are measures of which the computation typically requires immense Monte Carlo simulations. Another measurement is the Advanced Internal Ratings-Based model that estimates the capital requirement but solely accounts for a single risk factor. As an alternative to the commonly used time-consuming credit risk methods and measurements, Michael Pykhtin presents methods to approximate the Value at Risk and Expected Shortfall in his paper Multi-factor adjustment from 2004. The thesis’ main focus is an elucidation and investigation of the approximation methods that Pykhtin presents. Pykhtin’s approximations are thereafter implemented along with the Monte Carlo methods that is used as a benchmark. A recreation of the results Pykhtin presents is completed with satisfactory, strongly matching results, which is a confident verification that the methods have been implemented in correspondence with the article. The methods are also applied on a small and large synthetic Nordea data set to test the methods on alternative data. Due to the size complexity of the large data set, it cannot be computed in its original form. Thus, a clustering algorithm is used to eliminate this limitation while still keeping characteristics of the original data set. Executing the methods on the synthetic Nordea data sets, the Value at Risk and Expected Shortfall results have a larger discrepancy between approximated and Monte Carlo simulated results. The noted differences are probably due to increased borrower exposures, and portfolio structures not being compatible with Pykhtin’s approximation. The purpose of clustering the small data set is to test the effect on the accuracy and understand the clustering algorithm’s impact before implementing it on the large data set. Clustering the small data set caused deviant results compared to the original small data set, which is expected. The clustered large data set’s approximation results had a lower discrepancy to the benchmark Monte Carlo simulated results in comparison to the small data. The increased portfolio size creates a granularity decreasing the outcome’s variance for both the MC methods, and the approximation methods, hence the low discrepancy. Overall, Pykhtin’s approximations’ accuracy and execution time are relatively good for the experiments. It is however very challenging for the approximate methods to handle large portfolios, considering the issues that the portfolio run into at just a couple of thousand borrowers. Lastly, a comparison between the Advanced Internal Ratings-Based model, and modified Value at Risks and Expected Shortfalls are made. Calculating the capital requirement for the Advanced Internal Ratings-Based model, the absence of complex concentration risk consideration is clearly illustrated by the significantly lower results compared to either of the other methods. In addition, an increasing difference can be identified between the capital requirements obtained from Pykhtin’s approximation and the Monte Carlo method. This emphasizes the importance of utilizing complex methods to fully grasp the inherent portfolio risks. Behovet av att ta hänsyn till potentiella förluster av sällsynta händelser är av yttersta vikt för företag verksamma inom den finansiella sektorn. Vanliga mått på potentiella förluster är Value at Risk och Expected Shortfall. Dessa är mått där beräkningen vanligtvis kräver enorma Monte Carlo-simuleringar. Ett annat mått är Advanced Internal Ratings-Based-modellen som uppskattar ett kapitalkrav, men som enbart tar hänsyn till en riskfaktor. Som ett alternativ till dessa ofta förekommande och tidskrävande kreditriskmetoderna och mätningarna, presenterar Michael Pykhtin metoder för att approximera Value at Risk och Expected Shortfall i sin uppsats Multi-factor adjustment från 2004. Avhandlingens huvudfokus är en undersökning av de approximativa metoder som Pykhtin presenterar. Pykhtins approximationer implementeras och jämförs mot Monte Carlo-metoder, vars resultat används som referensvärden. Ett återskapande av resultaten Pykhtin presenterar i sin artikel har gjorts med tillfredsställande starkt matchande resultat, vilket är en säker verifiering av att metoderna har implementerats i samstämmighet med artikeln. Metoderna tillämpas även på ett litet och ett stor syntetiskt dataset erhållet av Nordea för att testa metoderna på alternativa data. På grund av komplexiteten hos det stora datasetet kan det inte beräknas i sin ursprungliga form. Således används en klustringsalgoritm för att eliminera denna begränsning samtidigt som egenskaperna hos den ursprungliga datamängden fortfarande bibehålls. Vid appliceringen av metoderna på de syntetiska Nordea-dataseten, identifierades en större diskrepans hos Value at Risk och Expected Shortfall-resultaten mellan de approximerade och Monte Carlo-simulerade resultaten. De noterade skillnaderna beror sannolikt på ökade exponeringar hos låntagarna och att portföljstrukturerna inte är förenliga med Pykhtins approximation. Syftet med klustringen av den lilla datasetet är att testa effekten av noggrannheten och förstå klustringsalgoritmens inverkan innan den implementeras på det stora datasetet. Att gruppera det lilla datasetet orsakade avvikande resultat jämfört med det ursprungliga lilla datasetet, vilket är förväntat. De modifierade stora datasetets approximativa resultat hade en lägre avvikelse mot de Monte Carlo simulerade benchmark resultaten i jämförelse med det lilla datasetet. Den ökade portföljstorleken skapar en finkornighet som minskar resultatets varians för både MC-metoderna och approximationerna, därav den låga diskrepansen. Sammantaget är Pykhtins approximationers noggrannhet och utförandetid relativt bra för experimenten. Det är dock väldigt utmanande för de approximativa metoderna att hantera stora portföljer, baserat på de problem som portföljen möter redan vid ett par tusen låntagare. Slutligen görs en jämförelse mellan Advanced Internal Ratings-Based-modellen, och modifierade Value at Risks och Expected shortfalls. När man beräknar kapitalkravet för Advanced Internal Ratings-Based-modellen, illustreras saknaden av komplexa koncentrationsrisköverväganden tydligt av de betydligt lägre resultaten jämfört med någon av de andra metoderna. Dessutom kan en ökad skillnad identifieras mellan kapitalkraven som erhålls från Pykhtins approximation och Monte Carlo-metoden. Detta understryker vikten av att använda komplexa metoder för att fullt ut förstå de inneboende portföljriskerna.

We show that there is a little mistake in an implication in a paper of Bob Gilmer on rngs.

The utilization of branchwood as lignocellulosic raw material source for paper production may have the potential of solving the problem of the availability of raw material in the pulp and paper industry. This study therefore compared the chemical composition and fiber morphological indices (according to Franklin’s method) of stemwood and branchwood in Eucalyptus camaldulensis and Pinus halepensis trees grown in Egypt. The statistical analysis showed a significant effect of species, wood type (stem and branchwood), and their interaction on the measured chemical constituents and fiber morphological indices at 0.05 significance level. In both genera, the stemwood exhibited a higher percentage of cellulose and hemicellulose and was lower in lignin, total extractives, and ash than those measured in branchwood. Also in both genera, the stemwood was higher in fiber length, Runkel ratio, rigidity coefficient, Muhlsteph ratio, and Luce’s shape factor, and lower in basic density and flexibility coefficient than those in branchwood. Based on the chemical analysis and the fiber morphological indices, the stemwood and branchwood of both species were suitable for paper production with various qualities. Moreover, good correlations were found in both stem and branchwood between the basic density and the fiber wall thickness and fiber lumen diameter. ln contrast, there was an independent association between the stemwood basic density and the fiber length, and this relationship in branchwood was positive for both genera.

This contribution focuses on paper models of architectural surfaces, in particular on some roofing systems describable by developable ones. Drawing on an interdisciplinary approach, between Architecture and Mathematics, potentialities and criticalities of these models in explicitly conveying Geometry are investigated, in relation to educational and communicative tasks, both when they are used in a direct, tangible way, and when the use is mediated by images generated by them (thus indirect); we discuss on the possibility for models and images to communicate their explicit and implicit Geometries. The main issue discussed is that a material or analytical description unequivocally allows to grasp all the peculiarities of geometrical shapes, while other representations are subject to critical selection of data and are therefore affected by subjective interpretations; similarly, the translation of the physical model into images is the result of choices which emphasize certain object peculiarities over others and is thus less objective. Hence the importance of the physical model (as well as its digital counterparts) which, even if not used directly, can be complementary to a content that, alone, would be partial and/or misleading., img journal, No 2 (2020): Graphics

This study is aimed at exploring the writing ability improvement process of g roup B students in TK Nursa and investigating to what extend the processing result of writing ability can be improved through sand paper alphabet . This study was a classroom action research using Kemmis and Mc. Taggart research model. This study was conducted in 2 cycles with 6 meetings in each cycle where every cycle consisted of the following steps: planning, action and observation, reflection. The sample of this study was 1 2 Group B students comprissing of 5 male students and 7 female students. The instruments used in this study was observational sheet of students activities using sand paper alphabet . The data in this study were quantitative and qualitative data. Quantitative data were analyzed by using descriptive statistic to compare the result from the first and second cycle. While qualitative data from field notes and interview were analyzed through the following steps: data reduction, data display and data verification. The results of this study show that there is the improvement of writing ability through sand paper alphabet , proven by the writing ability mean score in pre-cycle which was 50,17 % improve to 67,15 % in cycle I and keep increasing becoming 76,04 % in cycle II.

Chemical medicine which are synthetic chemicals or isolation products must not be added to herbal medicine, that was standared by Indonesian Head of the Drug and Food Control Agency in statement regarding Criteria and Procedure for Registration of Traditional Medicines, Standardized Herbal Medicines, and Phytofarmaka. This study aims to develope prototype of paper-based color test-strip to identify paracetamol trace in several types of Indonesian herbal medicine, better known as Jamu. Research conducted with experimental research wich make paper test-strip prototype by immobilizing reagents into Whatman’s filter paper, then it used to identify paracetamol in extracted Jamu samples. The paracetamol qualitative test uses 10 Jamu samples that distributed in Samarinda area. were also carried out on. Comparison methode with qualitative color reaction tests using specific reagents in the laboratory were also carried out beside the paper-based color test-strip methode. In addition with positive control tests using 5000 ppm paracetamol solution to make sure both methode used are valid. The results of this study showed that two prototype paper-based color test-strips containing 10% iron (III) chloride reagent and folin ciocalteu were able to detect the presence of paracetamol chemicals in Jamu samples with color reaction.

This study aims to predict financial distress in pulp and paper companies in Indonesia. The data used are the financial statements of each pul and paper company listed on the Indonesia Stock Exchange in 2012-2017. Data analysis techniques used descriptive analysis with three methods of financial distress prediction, namely the Altman Z-Score, Springate, and Zmijewski methods. The results showed that the Zmijewski method is a prediction method with the highest accuracy rate of 100%, with an error type of 0%. The Altman Z-Score method has an accuracy rate of 28.6%, with an error type of 71.4%. While the Springate method has an accuracy rate of 14.3%, with an error type of 85.7%. Therefore an accurate prediction method to predict the potential for financial distress is the Zmijewski method.

This paper describes the design of the normalising tactic ring_exp for the Lean prover. This tactic improves on existing tactics by extending commutative rings with a binary exponent operator. An inductive family of types represents the normal form, enforcing various invariants. The design can also be extended with more operators.

The Corona pandemic that the world is experiencing is one of the most prominent global disasters today, and has become the subject of great interest from all countries of the world, especially since its effects were not limited to the health aspect only, but extended to the economic, legal, political and social aspect in the lives of individuals, which has resulted in countries entering into conflict with this pandemic by taking a set of preventive measures to combat its spread, and perhaps the most important of these decisions was the imposition of home quarantine on citizens and forcing social distance, in addition to terminating many commercial activities, , which leads to make the implementation of commitments almost impossible. This research aims at determining the legal nature of the Corona pandemic, and whether it can be considered as a force majeure, or is it just an emergency? What is the impact of this pandemic on the deadline for submitting commercial papers for acceptance and fulfillment? Is the legal holder of the commercial transfer, who was not able to submit it for acceptance and fulfillment within the deadlines, considered a negligent holder? Or force majeure can apply here?

We investigated the influence of mental imagery expertise in 15 pen and paper role-players as an expert group compared to the gender-matched control group of computer role-players in the difficult Vandenberg and Kuse mental rotation task. In this task, the participants have to decide which two of four rotated figures match the target figure. The dependent measures were performance speed and accuracy. In our exploratory investigation, we further examined midline frontal theta band activation, parietal alpha band activation, and parietal alpha band asymmetry in EEG as indicator for the chosen rotation strategy. Additionally, we explored the gender influence on performance and EEG activation, although a very small female sample section was given. The expected gender difference concerning performance accuracy was negated by expertise in pen and paper role-playing women, while the gender-specific difference in performance speed was preserved. Moreover, gender differences concerning electro-cortical measures revealed differences in rotation strategy, with women using top-down strategies compared to men, who were using top-down strategies and active inhibition of associative cortical areas. These strategy uses were further moderated by expertise, with higher expertise leading to more pronounced activation patters, especially during successful performance. However, due to the very limited sample size, the findings of this explorative study have to be interpreted cautiously.

This study evaluated the fibre morphology of Musa balbisiana leaf, stalk and stem portions for pulp and paper production. Samples of Musa balbisiana portions were prepared and macerated in equal volume of glacial acetic acid and hydrogen peroxide in ratio 1:1. Twenty cellulose fibres from each portion were randomly selected using Reichert visopan microscope to determine the physical fibre morphology while the derived fibre indices were calculated. Data collected were subjected to one way Analysis of Variance (ANOVA). Follow up tests carried out using Duncan Multiple Range Test (DMRT). Results showed that means of fibre length, fibre diameter, cell wall thickness and lumen width ranged between 1.35 and 2.46 mm, 16.46 and 33.34 µm, 7.58 and 24.99 µm, and 3.54 and 3.56 µm, respectively. The mean values of fibre length of Musa balbisiana leaf and stalk were not significant but were significantly different from the mean values of the stem at p

Investigating the research trends within a scientific domain by analyzing semantic information extracted from scientific journals has been a topic of interest in the natural language processing (NLP) field. A research trend evaluation is generally based on the time evolution of the term occurrence or the term topic, but it neglects an important aspect—research publication latency. The average time lag between the research and its publication may vary from one month to more than one year, and it is a characteristic that may have significant impact when assessing research trends, mainly for rapidly evolving scientific areas. To cope with this problem, the present paper is the first work that explicitly considers research publication latency as a parameter in the trend evaluation process. Consequently, we provide a new trend detection methodology that mixes auto-ARIMA prediction with Mann–Kendall trend evaluations. The experimental results in an electronic design automation case study prove the viability of our approach.

The paper presents the study results of paper trapping during inkjet printing which contains cellulose pulp from the inner bark layer of mulberry branches. The connection between the print density and the paper surface structure, in particular, water absorption and raggedness, is established. The study of the stepwise gradation transition and color rendition, the graphic accuracy of reproduction of the slur element of the image is carried out. Densitometric and microscopic analysis of the impressions printed on an inkjet printer was performed. It was revealed that the pigments of water ink, depending on the microgeometry of the paper surface, penetrated deeper in different ways. It was found that the maximum thickness of the paint layer, expressed using the optical density values for the primary colors of the subtractive synthesis, and the best color reproduction were provided by the surface of the paper sample with 100 % addition of cellulose pulp from the inner layer of the bark of mulberry tree branches, which has the least roughness, according to the scanning probe microscope Solver HV. Recommendations are given for testing paper data on inkjet printers that use pigment inks and are less demanding on the surface properties of paper, or by printing methods that do not use low-viscosity printing inks.

In museum lighting, Chinese paper cultural relics are prone to cracking, embrittlement and other photochemical damage after absorbing the spectral energy of light sources. Owing to the different absorption and reflection characteristics of paper for different bands, optimizing the spectrum compositions of light sources can provide effective protection, the basis of which is to clarify the influence rule of spectra on the paper. However, the methods of color difference and Raman spectroscopy, which are widely used in the current research, cannot scientifically measure the lighting damage. In this study, Fourier transform infrared spectroscopy was used as the evaluation method, and 10 kinds of narrow-band lights were used as the experimental light source to conduct a 1440 h irradiation experiment on the samples of the ancient Chinese Xuan paper. The oxidation index was calculated as the evaluation index based on the infrared spectra measured every 240 hours, and a mathematical model for the response rate of paper to spectrum and exposure was established. 610 spectra were obtained with the 10 kinds of narrow-band lights combined and superimposed. The color rendering indexes of the above spectra were calculated, and 9,477 spectra that meet the requirements of viewing indicators were obtained. By calculating the damage degree of the above spectra with the model, the optimal LED spectrum with the minimum damage which met the visual requirements was obtained. Then it was input into the 10-channel spectral simulation system for spectral restoration. Two kinds of lights commonly used in lighting for paper cultural relics were selected to conduct a comparative experiment. The results showed that the optimal LED spectrum reduced damage degree by 49.4% and 59.7% respectively compared with the two kinds of contrast light sources, and was beneficial to energy saving.

Purpose This study aims to examine the colour changes affecting inkjet prints after the recycling of papers. Design/methodology/approach For recycling, papers prepared with the INGEDE 11p standard are recycled four times. Pulping, storage, flotation, beating and bleaching processes are applied for each recycling, respectively. Inkjet prints are made on the obtained test papers, and colour measurements are made using an X-Rite eXact spectrophotometer according to the ISO 13655:2017 standard. These processes are applied again to the papers which are recycled four times, and the results are analyzed. In addition, the values of ΔE00 ′, ΔL′, ΔH ′ and ΔC′ are calculated according to ISO 11664-6:2014 standard by making some calculations according to obtained the L′a′b′ values. Findings It is determined that the ΔE00 value increases after each recycling in cyan magenta and yellow colour, whereas it decreases in black. The highest ΔE00 value is calculated after the fourth recycling stage is yellow with a value of 8.33. The lowest ΔE00 value detected is black with a value of 0.76 after the fourth recycling stage. This paper observes that the colour with the most variation in hue angle among recycling repetitions is black and the colour with the highest hue angle value is yellow. It is seen that repeating recycling causes increase in the chromatic values of the prints. Originality/value After the fourth recycling stage, colour changes have reached an important point and can cause important printing problems. In this case, the customer’s approval must be obtained to continue printing. This case is valid for ΔE00 values. Colour differences for print contrast, trapping and print chroma values are either not very important or are positive for quality.

Based on the use of Hevea brasiliensis in latex production, the species has a consolidated role in the Brazilian economy. However, at the end of the production cycle, which lasts from 25 to 30 years, resulting wood, in general, has no added value and is normally used for firewood, without further exploring its technological properties. Seeking to introduce this species into the pulp and paper industry, we aimed to determine the fiber quality of 20 commercial clones. Wood samples were collected from planted trees (11 to 12 years old) in the municipality of Selvíria - MS. We calculated wood quality indexes of H. brasiliensis for cellulose and paper, including Flexibility coefficient, Wall proportion, Runkel ratio, Slenderness ratio (Aspect ratio), and Luce's Shape Factor. The fiber quality indexes that best indicate the potential use of wood from Hevea brasiliensis clones for cellulose and paper production were Wall Fraction, Runkel Ratio and Luce's Shape Factor, indicating that H. brasiliensis fibers, if used for proper industrial purposes, will give origin of a rigid paper with greater bonding contact on the surface. The clones that presented better results for fiber quality indexes were IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 and RRIM 725. Enabling the use of wood after the latex exploratory cycle for pulp and paper will serve as a basis for genetic improvement of these clones and expansion of forest plantations for this purpose. Atribuido al uso de Hevea brasiliensis en la producción de látex, una especie tiene un papel consolidado en la economía brasileña. Sin embargo, al final del ciclo de producción, que dura de 25 a 30 años, la madera resultante, por lo general, no tiene valor agregado y se utiliza normalmente en la producción de leña, sin conocimiento de sus propiedades tecnológicas. Con el objetivo de introducir esta especie en la industria de la pulpa y el papel, nos propusimos determinar la calidad de la fibra de 20 clones comerciales. Se recolectaron muestras de madera de árboles plantados (de 11 a 12 años) en la ciudad de Selvíria - MS. Calculamos los índices de calidad de la madera de H. brasiliensis para pulpa y papel: coeficiente de flexibilidad, fracción de pared, índice de Runkel, relación de esbeltez (relación de aspecto), factor de forma Luce. Los índices de calidad de la fibra que mejor indican el uso potencial de madera de clones de Hevea brasiliensis para la producción de celulosa y papel fueron: Wall Fraction, Runkel Ratio y Luce Form Factor, lo que indica que las fibras de la especie son utilizadas por los orígenes diseñados por la industria. a un papel rígido, con mayor contacto de unión en la superficie. Los clones con los mejores índices de calidad de fibra fueron IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 y RRIM 725. Habilitar el uso de madera después del ciclo exploratorio del látex para pulpa y papel y servir como base para la mejora genética de clones y expansión de plantaciones forestales para estos metales. Devido ao uso de Hevea brasiliensis na produção de látex, a espécie tem um papel consolidado na economia brasileira. No entanto, ao final do ciclo produtivo, que dura de 25 a 30 anos, a madeira resultante, em geral, não apresenta valor agregado e é normalmente utilizada na produção de lenha, sem conhecimento de suas propriedades tecnológicas. Buscando introduzir esta espécie na indústria de celulose e papel, objetivamos determinar a qualidade das fibras de 20 clones comerciais. Amostras de madeira foram coletadas de árvores plantadas (11 a 12 anos) no município de Selvíria – MS. Calculamos os índices de qualidade da madeira de H. brasiliensis para celulose e papel: coeficiente de flexibilidade, fração de parede, índice de Runkel, razão esbeltez (razão de aspecto), fator de forma de Luce. Os índices de qualidade das fibras que melhor indicam o potencial emprego da madeira dos clones de Hevea brasiliensis para a produção de celulose e papel foram: Fração Parede, Razão Runkel e Fator de Forma de Luce, indicando que as fibras da espécie se utilizadas pela indústria dará origem a um papel rígido, com maior contato de união na superfície. Os clones que apresentaram melhores índices de qualidade das fibras foram IAC 311, IAC 41, IAN 873, IAC 326, IAC 40 e RRIM 725. Possibilitando a utilização da madeira pós ciclo exploratório do latéx para a celulose e papel e servindo de base para melhoramento genético desses clones e ampliação dos plantios florestais para essa finalidade.

The five papers published by Hodgkin and Huxley in 1952 are seminal works in the field of physiology, earning their authors the Nobel Prize in 1963 and ushering in the era of membrane biophysics. The papers present a considerable challenge to the novice student, but this has been partly allayed by recent publications that have updated the reporting of current and voltage to reflect the modern convention and two books that describe the contents of the papers in detail. A disadvantage is that these guides contain hundreds of pages, requiring considerable time and energy on behalf of the reader. We present a concise guide to the Hodgkin and Huxley papers that includes only essential content, with the data presented in a linear and logical manner. We have color-coded figures for ease of understanding and included boxes that summarize key information for easy reference. It is our expectation that this article will act as an accessible introduction for students to the work of Hodgkin and Huxley and hopefully foster an appreciation for a fascinating story that repays in-depth study.

In this paper, we first generalize to any hyper-Kahler manifold X with $$b_3(X)\not =0$$ results proved by O’Grady for hyper-Kahler manifolds of generalized Kummer type. In the second part, we restrict to hyper-Kahler manifolds of generalized Kummer type and prove, using results of Markman, that their Kuga–Satake correspondence is algebraic.

“Real Normed Algebras Revisited,” the last paper of the late Gadi Moran, attempts to reconstruct the discovery of the complex numbers, the quaternions, and the octonions, as well as proofs of their...

We show that a smooth embedded paper Moebius band must have aspect ratio at least $$\begin{aligned}\lambda _1= \frac{2 \sqrt{4-2 \sqrt{3}}+4}{\root 4 \of {3} \sqrt{2}+2 \sqrt{2 \sqrt{3}-3}} =1.69497\ldots \end{aligned}$$ This bound comes more than 3/4 of the way from the old known bound of $$\pi /2=1.5708\ldots $$ to the conjectured bound of $$\sqrt{3} = 1.732\ldots $$

Let $ R $ be a ring with identity. The commuting graph of $ R $ is the graph associated to $ R $ whose vertices are non-central elements in $ R $, and distinct vertices $ A $ and $ B $ are adjacent if and only if $ AB = BA $. In this paper, we completely determine the automorphism group of the commuting graph of $ 2\times 2 $ matrix ring over $ \mathbb{Z}_{p^{s}} $, where $ \mathbb{Z}_{p^{s}} $ is the ring of integers modulo $ p^{s} $, $ p $ is a prime and $ s $ is a positive integer.

Does the materiality of a three-dimensional model have an effect on how this model operates in an exploratory way, how it prompts discovery of new mathematical results? Material mathematical models were produced and used during the second half of the nineteenth century, visualizing mathematical objects, such as curves and surfaces—and these were produced from a variety of materials: paper, cardboard, plaster, strings, wood. However, the question, whether their materiality influenced the status of these models—considered as exploratory, technical, or representational—was hardly touched upon. This article aims to approach this question by investigating two case studies: Beltrami’s paper models vs. Dyck’s plaster ones of the hyperbolic plane; and Chisini’s string models of braids vs. Artin’s and Moishezon’s algebraization of these braids. These two case studies indicate that materiality might have a decisive role in how the model was taken into account mathematically: either as an exploratory or rather as a technical or pedagogical object.

Rewinding machines are used in the paper converting industrial sector to unroll paper veils from large source reels and wind them around smaller rolls, for the production of paper logs to be used in household activities. Many different types of rewinding machine exist, and they are mostly based on stapling devices which automatically unroll a large coil of paper, roll it up around a new log, stop the veil allowing it to be torn off, unload the completed paper log, and reload a new paper core to be rolled up. Winding units generally include a primary and a secondary roller, supplying the desired rotational speed for winding, and a pressure unit consisting of a pressure roller in contact with the paper log being rolled up, which assures adequate containment and avoids the paper log to escape. All known systems have some mechanical limitations, mainly due to the contact of the pressure roller with the paper log, causing instabilities and vibrations, particularly when working with soft paper veils. This limits the maximum possible winding speed. The aim of this paper is it to present a detailed kinematic analysis of a novel pressure unit which overcomes the aforementioned limitation.

In this study, it is aimed to determine the most suitable time series models with Box-Jenkins method, which is the most widely used in prediction studies. Export and import values have been predicted by 2020 with the most suitable models. The data used in this study were obtained from the Turkey Statistical Institute. Data are monthly data covering from January 2003 to December 2014. Sum of Squared Errors (SSE) and Mean Squared Error (MSE) criteria were taken into consideration when selecting the best Box-Jenkins models. Also, in order to test the success of forecasting of the models, Root mean Error Square (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) were used. As a result of the analyzes, it was determined that the most suitable models for export and import data were ARIMA (2,1,0) (0,0,1)12 and ARIMA(3,1,2)(1,0,1)12. It was predicted that the rate of exports meeting imports in paper and paper products of Turkey will be approximately 0.86 in 2020.

In a recent paper [I. Altun and A. Tasdemir, On best proximity points of interpolative proximal contractions, Quaestiones Math. (2020), DOI: 10.2989/16073606.2020.1785576] the authors proved two best proximity point theorems for a new class of non-self mappings, called interpolative Reich- Rus-Ciric type proximal contractions of the rst and second kinds. Our purpose is to show that their results follow from a xed point theorem for interpolative Reich-Rus-Ciric type contraction mappings [E. Karapinar, R. Agarwal and H. Aydi, Interpolative Reich-Rus-Ciric contractions on partial metric spaces, Mathematics 6 (2018), 7 pages].

Precise assessment of harvest yield is a difficult field of work. The equipment and programming stage to foresee the harvest yield relies on different components like climate, soil fruitfulness, genotype, and different collaborating wards. The assignment is unpredictable inferable from the information that should be gathered in volumes to comprehend crop yield through remote sensor organizations and distant detecting. This paper audits the previous 15 years of exploration work in the improvement of assessing crop yield utilizing profound learning calculations. The meaning of examining progressions utilizing profound learning methods will help in dynamic for foreseeing the harvest yield. The cross breed mix of profound learning with distant detecting and remote sensor organizations can give accuracy agribusiness later on.

Necessary optimality conditions for a bilevel optimization problem are given in the paper by Kohli (J Optim Theory Appl 152: 632–651, 2012). Recently, the same author corrected his results in the note (J Optim Theory Appl 181:706–707, 2019). In this work, we have pointed out that some of the new modifications are wrong. We correct the flaws and present an alternative proof for the main result.

This study evaluates the efficacy of using textile waste blended with paper waste to form biodegradable seedling pots. A bio-composite blend of cotton (20% cotton, 40% newspaper, and 40% corrugated cardboard) and polycotton (20% polycotton, 40% newspaper, and 40% corrugated cardboard) with an optimum strength was formed into seedling pots. The appreciated seedling pots (untreated blends of cotton and polycotton) were compared with the commercial pots (cardboard seed starter pot and Jiffy pot) in terms of mechanical properties (tensile strength and compressive strength), biodegradability (soil burial test and anaerobic digestion), and seed germination. The untreated blends of cotton and polycotton pots demonstrated a comparable optimum strength, while the Jiffy pot and cardboard seed starter pot obtained the least tensile and compressive strengths, respectively. The anaerobic biodegradability assay suggests that the cotton blend pot, polycotton blend pot, and cardboard seed starter pot can degrade anaerobically because of high biogas and methane generation potential. A 100% seed germination was observed from the four seedling pots tested. Thus, the results demonstrate the efficacy of utilizing textile waste and paper waste to develop seedling pots with desirable strength and biodegradability compared to the commercial pots.

Paper waste in the mockups design with regular, irregular, and amorphous patterns is a critical problem in digital printing presses. Paper waste reduction directly impacts production costs, generating business and environmental benefits. This problem can be mapped to the two-dimensional irregular bin-packing problem. In this paper, an iterated local search algorithm using a novel neighborhood structure to detect overlaps between amorphous shapes is introduced. This algorithm is used to solve the paper waste problem, modeled as one 2D irregular bin-packing problem. The experimental results show that this approach works efficiently and effectively to detect and correct the overlaps between regular, irregular, and amorphous figures.

Borassus flabellifer L., one of the palm-based commodities in Indonesia which is grows in dry areas especially around the north coast of Java Island. An abundant waste of this plant is a leaf midrib and fruit fiber have an opportunity as a source of lignocellulose for the paper industry. In this study, Kraft paper production was conducted to know the influence of the proportion of Borassus flabellifer L. leaf midrib pulp and fruit fiber pulp, and the concentration of Polyvinyl Acetate (PVAc) adhesives on the sensory and physical quality of kraft paper. The research method used was Randomized Block Design (RBD) with two factors. The Friedman test was used to determine the sensory quality of kraft paper. The physical quality of kraft paper was used ANOVA analysis. The results showed that the treatment of raw material proportion and PVAc adhesive concentration had significant effect on color, surface texture, yield, and tensile resistance, but not significantly different between treatment of gramature and tear resistance. The best treatment of sensory tests was kraft paper with proportion of leaf midrib pulp 50% and fruit fiber pulp 50% and a 7.5% PVAc adhesive concentration. It has a yield value of 72.11%, gramature of 162.80 g/m2, tensile strength of 1.70 %, and tear resistance of 197.6 gf.