Search

Dedicated breast CT is being increasingly used for breast imaging. This technique provides images with no compression, removal of tissue overlap, rapid acquisition, and available simultaneous assessment of microcalcifications and contrast enhancement. In this second installment in a 2-part review, the current status of clinical applications and ongoing efforts to develop new imaging systems are discussed, with particular emphasis on how to achieve optimized practice including lesion detection and characterization, response to therapy monitoring, density assessment, intervention, and implant evaluation. The potential for future screening with breast CT is also addressed. KEY POINTS: • Dedicated breast CT is an emerging modality with enormous potential in the future of breast imaging by addressing numerous clinical needs from diagnosis to treatment. • Breast CT shows either noninferiority or superiority with mammography and numerical comparability to MRI after contrast administration in diagnostic statistics, demonstrates excellent performance in lesion characterization, density assessment, and intervention, and exhibits promise in implant evaluation, while potential application to breast cancer screening is still controversial. • New imaging modalities such as phase-contrast breast CT, spectral breast CT, and hybrid imaging are in the progress of R & D.

Purpose Breast cancer is the most common malignancy in women. Unfortunately, current breast imaging techniques all suffer from certain limitations: they are either not fully three dimensional, have an insufficient resolution or low soft-tissue contrast. Grating interferometry breast computed tomography (GI-BCT) is a promising X-ray phase contrast modality that could overcome these limitations by offering high soft-tissue contrast and excellent three-dimensional resolution. To enable the transition of this technology to clinical practice, dedicated data-processing algorithms must be developed in order to effectively retrieve the signals of interest from the measured raw data. Methods This article proposes a novel denoising algorithm that can cope with the high-noise amplitudes and heteroscedasticity which arise in GI-BCT when operated in a low-dose regime to effectively regularize the ill-conditioned GI-BCT inverse problem. We present a data-driven algorithm called INSIDEnet, which combines different ideas such as multiscale image processing, transform-domain filtering, transform learning, and explicit orthogonality to build an Interpretable NonexpanSIve Data-Efficient network (INSIDEnet). Results We apply the method to simulated breast phantom datasets and to real data acquired on a GI-BCT prototype and show that the proposed algorithm outperforms traditional state-of-the-art filters and is competitive with deep neural networks. The strong inductive bias given by the proposed model's architecture allows to reliably train the algorithm with very limited data while providing high model interpretability, thus offering a great advantage over classical convolutional neural networks (CNNs). Conclusions The proposed INSIDEnet is highly data-efficient, interpretable, and outperforms state-of-the-art CNNs when trained on very limited training data. We expect the proposed method to become an important tool as part of a dedicated plug-and-play GI-BCT reconstruction framework, needed to translate this promising technology to the clinics., Medical Physics, 49 (6), ISSN:0094-2405, ISSN:2473-4209, ISSN:1522-8541

Purpose A clinical-prototype, dedicated, cone-beam breast computed tomography (CBBCT) system with offset detector is undergoing clinical evaluation at our institution. This study is to estimate the normalized glandular dose coefficients ( DgN CT ) that provide air kerma-to-mean glandular dose conversion factors using Monte Carlo simulations. Materials and methods The clinical prototype CBBCT system uses 49 kV x-ray spectrum with 1.39 mm 1st half-value layer thickness. Monte Carlo simulations (GATE, version 8) were performed with semi-ellipsoidal, homogeneous breasts of various fibroglandular weight fractions ( f g = 0.01 , 0.15 , 0.5 , 1 ) , chest wall diameters ( d = 8 , 10 , 14 , 18 , 20 cm), and chest wall to nipple length ( l = 0.75 d ), aligned with the axis of rotation (AOR) located at 65 cm from the focal spot to determine the DgN CT . Three geometries were considered - 40 × 30 -cm detector with no offset that served as reference and corresponds to a clinical CBBCT system, 30 × 30 -cm detector with 5 cm offset, and a 30 × 30 -cm detector with 10 cm offset. Results For 5 cm lateral offset, the DgN CT ranged 0.177 - 0.574 mGy/mGy and reduction in DgN CT with respect to reference geometry was observed only for 18 cm ( 6.4 % ± 0.23 % ) and 20 cm ( 9.6 % ± 0.22 % ) diameter breasts. For the 10 cm lateral offset, the DgN CT ranged 0.221 - 0.581 mGy/mGy and reduction in DgN CT was observed for all breast diameters. The reduction in DgN CT was 1.4 % ± 0.48 % , 7.1 % ± 0.13 % , 17.5 % ± 0.19 % , 25.1 % ± 0.15 % , and 27.7 % ± 0.08 % for 8, 10, 14, 18, and 20 cm diameter breasts, respectively. For a given breast diameter, the reduction in DgN CT with offset-detector geometries was not dependent on f g . Numerical fits of DgN CT d , l , f g were generated for each geometry. Conclusion The DgN CT and the numerical fit, D g N CT d , l , f g would be of benefit for current CBBCT systems using the reference geometry and for future generations using offset-detector geometry. There exists a potential for radiation dose reduction with offset-detector geometry, provided the same technique factors as the reference geometry are used, and the image quality is clinically acceptable.

Breast CT provides image volumes with isotropic resolution in high contrast, enabling detection of small calcification (down to a few hundred microns in size) and subtle density differences. Since breast is sensitive to x-ray radiation, dose reduction of breast CT is an important topic, and for this purpose, few-view scanning is a main approach. In this article, we propose a Deep Efficient End-to-end Reconstruction (DEER) network for few-view breast CT image reconstruction. The major merits of our network include high dose efficiency, excellent image quality, and low model complexity. By the design, the proposed network can learn the reconstruction process with as few as $\mathcal {O}(N)$ parameters, where $N$ is the side length of an image to be reconstructed, which represents orders of magnitude improvements relative to the state-of-the-art deep-learning-based reconstruction methods that map raw data to tomographic images directly. Also, validated on a cone-beam breast CT dataset prepared by Koning Corporation on a commercial scanner, our method demonstrates a competitive performance over the state-of-the-art reconstruction networks in terms of image quality. The source code of this paper is available at: https://github.com/HuidongXie/DEER .

Various imaging parameters in X-ray computed tomography (CT) should be examined and optimized by task-based assessment of human observer performance. Recently, convolutional neural networks (CNNs) have been introduced as anthropomorphic model observers. However, when human-labeled data are not available or limited, CNNs with an existing training strategy do not produce good performance agreement with human observers. The purpose of this study is to propose new training strategies for a CNN-based anthropomorphic model observer without human-labeled data for signal-known-exactly and background-known-statistically detection tasks. We acquired cone-beam CT projection data of breast background volume and reconstructed the projection data using the Feldkamp-Davis-Kress algorithm with 12 different imaging conditions including viewing image planes. Training data for the CNN were labeled utilizing conventional model observers. We employed an early stopping rule to reflect internal noise during the CNN training. To examine the CNN performance, we used three different training-testing schemes. The performance agreement between the human and model observers was measured via a Bland-Altman plot, the root-mean-squared error (RMSE), and the Pearson's correlation coefficient ($r$ ) of their proportion correct values. Throughout the three different training-testing schemes, CNNs with the proposed training strategies yielded narrower limits of agreements (with a bias lower than 0.03) and higher scores in both RMSE and $r$ than the conventional model observers. This indicates the proposed training strategies enable the CNN-based anthropomorphic model observer to have good performance agreement with human observers and generalize better to different imaging conditions than conventional anthropomorphic model observers.

Objective. To introduce the optimization of a customized GPU-based simultaneous algebraic reconstruction technique (cSART) in the field of phase-contrast breast computed tomography (bCT). The presented algorithm features a 3D bilateral regularization filter that can be tuned to yield optimal performance for clinical image visualization and tissues segmentation. Approach. Acquisitions of a dedicated test object and a breast specimen were performed at Elettra, the Italian synchrotron radiation (SR) facility (Trieste, Italy) using a large area CdTe single-photon counting detector. Tomographic images were obtained at 5 mGy of mean glandular dose, with a 32 keV monochromatic x-ray beam in the free-space propagation mode. Three independent algorithms parameters were optimized by using contrast-to-noise ratio (CNR), spatial resolution, and noise texture metrics. The results obtained with the cSART algorithm were compared with conventional SART and filtered back projection (FBP) reconstructions. Image segmentation was performed both with gray scale-based and supervised machine-learning approaches. Main results. Compared to conventional FBP reconstructions, results indicate that the proposed algorithm can yield images with a higher CNR (by 35% or more), retaining a high spatial resolution while preserving their textural properties. Alternatively, at the cost of an increased image ‘patchiness’, the cSART can be tuned to achieve a high-quality tissue segmentation, suggesting the possibility of performing an accurate glandularity estimation potentially of use in the realization of realistic 3D breast models starting from low radiation dose images. Significance. The study indicates that dedicated iterative reconstruction techniques could provide significant advantages in phase-contrast bCT imaging. The proposed algorithm offers great flexibility in terms of image reconstruction optimization, either toward diagnostic evaluation or image segmentation.

Purpose: To demonstrate the utility of high-resolution micro-computed tomography ( μ CT ) for determining ground-truth size and shape properties of calcium grains for evaluation of detection performance in breast CT (bCT). Approach: Calcium carbonate grains ( ∼ 200 μ m ) were suspended in 1% agar solution to emulate microcalcifications ( μ Calcs ) within a fibroglandular tissue background. Ground-truth imaging was performed on a commercial μ CT scanner and was used for assessing calcium-grain size and shape, and for generating μ Calc signal profiles. Calcium grains were placed within a realistic breast-shaped phantom and imaged on a prototype bCT system at 3- and 6-mGy mean glandular dose (MGD) levels, and the non-prewhitening detectability was assessed. Additionally, the μ CT -derived signal profiles were used in conjunction with the bCT system characterization (MTF and NPS) to obtain predictions of bCT detectability. Results: Estimated detectability of the calcium grains on the bCT system ranged from 2.5 to 10.6 for 3 mGy and from 3.8 to 15.3 for 6 mGy with large fractions of the grains meeting the Rose criterion for visibility. Segmentation of μ CT images based on morphological operations produced accurate results in terms of segmentation boundaries and segmented region size. A regression model linking bCT detectability to μ Calc parameters indicated significant effects of μ Calc size and vertical position within the breast phantom. Detectability using μ CT -derived detection templates and bCT statistical properties (MTF and NPS) were in good correspondence with those measured directly from bCT ( R 2 > 0.88 ). Conclusions: Parameters derived from μ CT ground-truth data were shown to produce useful characterizations of detectability when compared to estimates derived directly from bCT. Signal profiles derived from μ CT imaging can be used in conjunction with measured or hypothesized statistical properties to evaluate the performance of a system, or system component, that may not currently be available.

Purpose: The SYRMA-3D collaboration is setting up a breast computed tomography (bCT) clinical program at the Elettra synchrotron radiation facility in Trieste, Italy. Unlike the few dedicated scanners available at hospitals, synchrotron radiation bCT requires the patient's rotation, which in turn implies a long scan duration (from tens of seconds to few minutes). At the same time, it allows the achievement of high spatial resolution. These features make synchrotron radiation bCT prone to motion artifacts. This article aims at assessing and compensating for motion artifacts through an optical tracking approach. Methods: In this study, patients’ movements due to breathing have been first assessed on seven volunteers and then simulated during the CT scans of a breast phantom and a surgical specimen, by adding a periodic oscillatory motion (constant speed, 1 mm amplitude, 12 cycles/minute). CT scans were carried out at 28 keV with a mean glandular dose of 5 mGy. Motion artifacts were evaluated and a correction algorithm based on the optical tracking of fiducial marks was introduced. A quantitative analysis based on the structural similarity (SSIM) index and the normalized mean square error (nMSE) was performed on the reconstructed CT images. Results: CT images reconstructed through the optical tracking procedure were found to be as good as the motionless reference image. Moreover, the analysis of SSIM and nMSE demonstrated that an uncorrected motion of the order of the system's point spread function (around 0.1 mm in the present case) can be tolerated. Conclusions: Results suggest that a motion correction procedure based on an optical tracking system would be beneficial in synchrotron radiation bCT.

Purpose The purpose of this work was to generate uncompressed heterogeneous breast phantom models using size-dependent fibroglandular distributions derived from a large cohort of breast CT (bCT) datasets, and to compare differences in normalized glandular dose coefficients for bCT "DgNCT " when the realistic heterogeneous model is considered relative to the simple, homogeneous model used in the past. Methods A cohort of 274 segmented bCT datasets were used to quantify the fibroglandular tissue distribution within the breast parenchyma. Each dataset was interpolated to an isotropic voxel size of 0.25 mm and the breast center-of-mass was aligned for all coronal slices. Each aligned dataset was converted into two binarized volumes representing voxels containing only glandular tissue "G(x,y,z)" and voxels containing glandular or adipose tissue "AG(x,y,z)". The datasets were classified by volume in accordance with previously reported size-dependent, breast-shaped phantoms. Within the five groups - each containing on average 55 datasets, all G(x,y,z) and AG(x,y,z) volumes were summed separately representing the cumulative distribution of glandular tissue or breast parenchyma (glandular + adipose), respectively. G(x,y,z) was divided by AG(x,y,z) on a voxel-by-voxel basis resulting in a glandular fraction "GF(x,y,z)" distribution for each phantom size. The GF(x,y,z) distributions were used to construct heterogeneous mathematical phantoms for the small, median, and large breast sizes with a 1.5 mm skin thickness - based on previously reported measurements from bCT, and a 5 mm skin thickness for comparison with outdated assumptions of skin thickness. A subset of 15 bCT datasets from the cohort (five for each breast size) were used to construct voxelized patient models for validation of the heterogeneous phantom models. Monte Carlo techniques were used to estimate monoenergetic DgN(E)C T values for photon energies from 9 to 70 keV (in 1 keV intervals) using the mathematical phantoms composed of either heterogeneous or homogeneous breast parenchyma. Polyenergetic (pDgNCT ) coefficients were determined by weighting the DgN(E)C T values by x-ray spectra tuned to the beam characteristic of breast CT. Dose coefficients were compared between the two breast compositions for each volume class, breast density, and skin thickness. Results For photon energies ≲45 keV, the homogeneous model overestimates DgN(E) values relative to the realistic heterogeneous model sorted into five volume classes. The 5 mm skin thickness underestimates DgN(E) values relative to the realistic 1.5 mm thickness for lower energies and the differences diminish up to 70 keV. Averaged across all phantom sizes the homogeneous model overestimates pDgNCT by 5.7% and 23.3% for the 60 kV W/Cu and 49 kV W/Al spectra, respectively. The heterogeneous model was also found to be in agreement with the voxelized bCT patient models with pDgNCT differences less than 2.3% and 5.2% for the 60 kV W/Cu and 49 kV W/Al spectra, respectively, across all phantom sizes. Conclusion Anatomically accurate heterogeneous phantom models were developed using bCT image-derived fibroglandular tissue distributions. These new models improve the accuracy of bCT dosimetry, and in conjunction with previous models for mammography, may help in providing a more universally accepted breast dosimetry model.

Item does not contain fulltext Breast computed tomography (BCT) is an emerging application of X-ray tomography in radiological practice. A few clinical prototypes are under evaluation in hospitals and new systems are under development aiming at improving spatial and contrast resolution and reducing delivered dose. At the same time, synchrotron-radiation phase-contrast mammography has been demonstrated to offer substantial advantages when compared with conventional mammography. At Elettra, the Italian synchrotron radiation facility, a clinical program of phase-contrast BCT based on the free-space propagation approach is under development. In this paper, full-volume breast samples imaged with a beam energy of 32 keV delivering a mean glandular dose of 5 mGy are presented. The whole acquisition setup mimics a clinical study in order to evaluate its feasibility in terms of acquisition time and image quality. Acquisitions are performed using a high-resolution CdTe photon-counting detector and the projection data are processed via a phase-retrieval algorithm. Tomographic reconstructions are compared with conventional mammographic images acquired prior to surgery and with histologic examinations. Results indicate that BCT with monochromatic beam and free-space propagation phase-contrast imaging provide relevant three-dimensional insights of breast morphology at clinically acceptable doses and scan times.

Research into conebeam CT concepts began as soon as the first clinical single-slice CT scanner was conceived. Early implementations of conebeam CT in the 1980s focused on high-contrast applications where concurrent high resolution (

PurposeClinical use of dedicated breast computed tomography (bCT) requires relatively short scan times necessitating systems with high frame rates. This in turn impacts the x-ray tube operating range. We characterize the effects of tube voltage, beam filtration, dose, and object size on contrast and noise properties related to soft tissue and iodine contrast agents as a way to optimize imaging protocols for soft tissue and iodine contrast at high frame rates.MethodsThis study design uses the signal-difference-to-noise ratio (SDNR), noise-equivalent quanta (NEQ), and detectability (d´) as measures of imaging performance for a prototype breast CT scanner that utilizes a pulsed x-ray tube (with a 4ms pulse width) at 43.5fps acquisition rate. We assess a range of kV, filtration, breast phantom size, and mean glandular dose (MGD). Performance measures are estimated from images of adipose-equivalent breast phantoms machined to have a representative size and shape of small, medium, and large breasts. Water (glandular tissue equivalent) and iodine contrast (5mg/ml) were used to fill two cylindrical wells in the phantoms.ResultsAir kerma levels required for obtaining an MGD of 6mGy ranged from 7.1 to 9.1mGy and are reported across all kV, filtration, and breast phantom sizes. However, at 50kV, the thick filters (0.3mm of Cu or Gd) exceeded the maximum available mA of the x-ray generator, and hence, these conditions were excluded from subsequent analysis. There was a strong positive association between measurements of SDNR and d' (R2 >0.97) within the range of parameters investigated in this work. A significant decrease in soft tissue SDNR was observed for increasing phantom size and increasing kV with a maximum SDNR at 50kV with 0.2mm Cu or 0.2mm Gd filtration. For iodine contrast SDNR, a significant decrease was observed with increasing phantom size, but a decrease in SDNR for increasing kV was only observed for 70kV (50 and 60kV were not significantly different). Thicker Gd filtration (0.3mm Gd) resulted in a significant increase in iodine SDNR and decrease in soft tissue SDNR but requires significantly more tube current to deliver the same MGD.ConclusionsThe choice of 60kV with 0.2mm Gd filtration provides a good trade-off for maximizing both soft tissue and iodine contrast. This scanning technique takes advantage of the ~50keV Gd k-edge to produce contrast and can be achieved within operating range of the x-ray generator used in this work. Imaging at 60kV allows for a greater range in dose delivered to the large breast sizes when uniform image quality is desired across all breast sizes. While imaging performance metrics (i.e., detectability index and SDNR) were shown to be strongly correlated, the methodologies presented in this work for the estimation of NEQ (and subsequently d') provides a meaningful description of the spatial resolution and noise characteristics of this prototype bCT system across a range of beam quality, dose, and object sizes.

Contains fulltext : 232918.pdf (Publisher’s version ) (Open Access) PURPOSE: To develop and evaluate the diagnostic performance of an algorithm for multi-marker radiomic-based classification of breast masses in dedicated breast computed tomography (bCT) images. METHODS: Over 1000 radiomic descriptors aimed at quantifying mass and border heterogeneity, morphology, and margin sharpness were developed and implemented. These included well-established texture and shape feature descriptors, which were supplemented with additional approaches for contour irregularity quantification, spicule and lobe detection, characterization of degree of infiltration, and differences in peritumoral compartments. All descriptors were extracted from a training set of 202 bCT masses (133 benign and 69 malignant), and their individual diagnostic performance was investigated in terms of area under the receiver operating characteristics (ROC) curve (AUC) of single-feature-based linear discriminant analysis (LDA) classifiers. Subsequently, the most relevant descriptors were selected through a multiple-step feature selection process (including stability analysis, statistical significance, evaluation of feature interaction, and dimensionality reduction), and used to develop a final LDA radiomic model for classification of benign and malignant masses, which was then tested on an independent test set of 82 cases (45 benign and 37 malignant). RESULTS: The majority of the individual radiomic descriptors showed, on the training set, an AUC value deriving from a linear decision boundary higher than 0.65, with the lower limit of the associated 95% confidence interval (C.I.) not overlapping with random chance (AUC = 0.5). The final LDA radiomic model resulted in a test set AUC of 0.90 (95% C.I. 0.80-0.96). CONCLUSIONS: The proposed multi-marker radiomic approach achieved high diagnostic accuracy in bCT mass classification, using a radiomic signature based on different feature types. While future studies with larger datasets are needed to further validate these results, quantitative radiomics applied to bCT shows potential to improve the breast cancer diagnosis pipeline.

We investigated PET image quantification when using a uniform attenuation coefficient ( $\mu $ ) for attenuation correction (AC) of anthropomorphic density phantoms derived from high-resolution breast CT scans. A breast PET system was modeled with perfect data corrections except for AC. Using uniform $\mu $ for AC resulted in quantitative errors roughly proportional to the difference between $\mu $ used in AC ( $\mu _{\mathrm{ AC}}$ ) and local $\mu $ , yielding approximately ± 5% bias, corresponding to the variation of $\mu $ for 511-keV photons in breast tissue. Global bias was lowest when uniform $\mu _{\mathrm{ AC}}$ was equal to the phantom mean $\mu $ ( $\mu _{\mathrm{ mean}}$ ). Local bias in 10-mm spheres increased as the sphere $\mu $ deviated from $\mu _{\mathrm{ mean}}$ , but remained only 2%–3% when the $\mu _{\mathrm{ sphere}}$ was 6.5% higher than $\mu _{\mathrm{ mean}}$ . Bias varied linearly with and was roughly proportional to local $\mu $ mismatch. Minimizing local bias, e.g., in a small sphere, required the use of a uniform $\mu $ value between the local $\mu $ and the $\mu _{\mathrm{ mean}}$ . Thus, biases from using uniform- $\mu $ AC are low when local $\mu _{\mathrm{ sphere}}$ is close to $\mu _{\mathrm{ mean}}$ . As the $\mu _{\mathrm{ sphere}}$ increasingly differs from the phantom $\mu _{\mathrm{ mean}}$ , bias increases, and the optimal uniform $\mu $ is less predictable, having a value between $\mu _{\mathrm{ sphere}}$ and the phantom $\mu _{\mathrm{ mean}}$ .

A Phase-Contrast breast CT facility based on a high-resolution CdTe photon-counting detector is under development at Elettra, the Italian Synchrotron Radiation (SR) facility in Trieste. The CT system exploits propagation-based phasecontrast imaging and phase-retrieval algorithm. The voxel size is 57×57×50 μm3 and the delivered MGDs, about 5 mGy, are comparable with clinical breast CT systems. In the present contribution, the comparisons between histological breast cancers and full breast CT images are presented from samples of breast mastectomy. The high resolution of the breast CT images and low noise due to the phase contrast allow a very fine matching between X-ray CT and histology at acceptable delivered doses.

X-ray imaging is a corner stone of breast cancer diagnosis. By exploiting the phase shift of X-rays rather than their attenuation, phase-contrast tomography has the potential to dramatically increase the visibility of small and low contrast features, thus leading to better diagnosis. This thesis presents research on the first synchrotron-based project developing a clinical phase-contrast breast computed tomography (CT) setup at Elettra, the Italian Syncrotron Radiation Facility. This book includes a comprehensive theoretical background on propagation-based phase-contrast imaging, exploring and extending the most recent image formation models. Along with theory, many practical implementation and optimization issues, ranging from detector-specific processing to setup geometry, are tackled on the basis of a large number of experimental evidences. Most of the modelling results and data analysis have general validity, being a valuable framework for optimization of phase-contrast setups. Results obtained at synchrotron are also compared with "real world" laboratory sources: both a first-of-its-kind comparison with one of the few hospital breast CT systems and a state-of-the-art implementation of monochromatic phase-contrast micro-tomography with a conventional rotating anode source are presented. On a more general level, this work sheds a light on the importance of synchrotron-based clinical programs, which are key to trigger the long-anticipated transition of phase-contrast imaging from synchrotrons to hospitals.

The application of phase-contrast imaging to breast cancer detection has always been a driving force in the development of phase-sensitive techniques. By making use of the physical foundations of propagation-based imaging previously introduced, this chapter is focused on the specific application in the field of breast computed tomography.

Breast Computed Tomography (bCT) is a three-dimensional imaging technique that is raising interest among radiologists as a viable alternative to mammographic planar imaging. In X-rays imaging it would be desirable to maximize the capability of discriminating different tissues, described by the Contrast to Noise Ratio (CNR), while minimizing the dose (i.e. the radiological risk). Both dose and CNR are functions of the X-ray energy. This work aims at experimentally investigating the optimal energy that, at fixed dose, maximizes the CNR between glandular and adipose tissues. Acquisitions of both tissue-equivalent phantoms and actual breast specimens have been performed with the bCT system implemented within the Syrma-3D collaboration at the Syrmep beamline of the Elettra synchrotron (Trieste). The experimental data have been also compared with analytical simulations and the results are in agreement. The CNR is maximized at energies around 26–28 keV. These results are in line with the outcomes of a previously presented simulation study which determined an optimal energy of 28 keV for a large set of breast phantoms with different diameters and glandular fractions. Finally, a study on photon starvation has been carried out to investigate how far the dose can be reduced still having suitable images for diagnostics.

Purpose With the advent of three-dimensional (3D) breast imaging modalities such as digital breast tomosynthesis (DBT) and dedicated breast CT (bCT), research into new anthropomorphic breast phantoms has accelerated. These breast phantoms are important for the optimization of new breast imaging systems, assessing new regulatory submissions to prove safety and effectiveness, and for developing new approaches to acceptance and constancy testing of 3D breast imaging systems. This paper provides a review of current research investigating both digital and physical breast phantom development for use in x-ray based imaging. Methods Two approaches for designing anthropomorphic, digital breast phantoms are discussed, procedural model-based phantom generation, where breast features are expressed using mathematical models, and patient-based generation, where breast structures from tissue specimens or patient-based breast MR or CT volumes are segmented. Following this discussion, a review of physical anthropomorphic phantoms is given, with emphasis on the advantages and disadvantages present with each approach. Conclusions This paper provides a summary of the state-of-the-art in anthropomorphic breast phantom development for x-ray breast imaging. The primary advantage of model-based digital phantoms is that an unlimited number of phantoms with varying size, shape, and density can be generated. Current research on model-based breast phantoms is producing more and more realistic breast models; however, they probably are not yet able to pass the so-called "fool the radiologist" visualization test. Empirical patient-based breast phantoms are typically based on clinical breast CT data and look more realistic. However, clinical breast CT images have limited spatial resolution and thus do not always portray the finer details in the breast. A number of innovative solutions have been proposed for fabricating physical anthropomorphic breast phantoms based on digital phantom models; however, a number of challenges remain, including realistic modeling of x-ray attenuation properties and accurately representing high-frequency structures within breast.

A deep learning (DL) network for 2D-based breast mass segmentation in unenhanced dedicated breast CT images was developed and validated, and its robustness in radiomic feature stability and diagnostic performance compared to manual annotations of multiple radiologists was investigated. 93 mass-like lesions were extensively augmented and used to train the network (n = 58 masses), which was then tested (n = 35 masses) against manual ground truth of a qualified breast radiologist with experience in breast CT imaging using the Conformity coefficient (with a value equal to 1 indicating a perfect performance). Stability and diagnostic power of 672 radiomic descriptors were investigated between the computerized segmentation, and 4 radiologists' annotations for the 35 test set cases. Feature stability and diagnostic performance in the discrimination between benign and malignant cases were quantified using intraclass correlation (ICC) and multivariate analysis of variance (MANOVA), performed for each segmentation case (4 radiologists and DL algorithm). DL-based segmentation resulted in a Conformity of 0.85 ± 0.06 against the annotated ground truth. For the stability analysis, although modest agreement was found among the four annotations performed by radiologists (Conformity 0.78 ± 0.03), over 90% of all radiomic features were found to be stable (ICC>0.75) across multiple segmentations. All MANOVA analyses were statistically significant (p ≤ 0.05), with all dimensions equal to 1, and Wilks’ lambda ≤0.35. In conclusion, DL-based mass segmentation in dedicated breast CT images can achieve high segmentation performance, and demonstrated to provide stable radiomic descriptors with comparable discriminative power in the classification of benign and malignant tumors to expert radiologist annotation.

Iodinated contrast-enhanced X-ray imaging of the breast has been studied with various modalities, including full-field digital mammography (FFDM), digital breast tomosynthesis (DBT), and dedicated breast CT. Contrast imaging with breast CT has a number of advantages over FFDM and DBT, including the lack of breast compression, and generation of fully isotropic 3-D reconstructions. Nonetheless, for breast CT to be considered as a viable tool for routine clinical use, it would be desirable to reduce radiation dose. One approach for dose reduction in breast CT is spectral shaping using X-ray filters. In this paper, two high atomic number filter materials are studied, namely, gadolinium (Gd) and erbium (Er), and compared with Al and Cu filters currently used in breast CT systems. Task-based performance is assessed by imaging a cylindrical poly(methyl methacrylate) phantom with iodine inserts on a benchtop breast CT system that emulates clinical breast CT. To evaluate detectability, a channelized hoteling observer (CHO) is used with sums of Laguerre-Gauss channels. It was observed that spectral shaping using Er and Gd filters substantially increased the dose efficiency (defined as signal-to-noise ratio of the CHO divided by mean glandular dose) as compared with kilovolt peak and filter settings used in commercial and prototype breast CT systems. These experimental phantom study results are encouraging for reducing dose of breast CT, however, further evaluation involving patients is needed.

Rationale and Objectives Dedicated breast computed tomography (DBCT) is an emerging and promising modality for breast lesions. The objective of this study was to evaluate the potential use of applying the BI-RADS Mammography Atlas 5th Edition for reporting and assessing breast lesions on DBCT. Currently, no atlas exists for DBCT. Materials and Methods Four radiologists trained in breast imaging were recruited in this institutional review board-approved, Health Insurance Portability and Accountability Act-compliant study. The enrolled radiologists, who were blinded to mammographic and histopathologic findings, individually reviewed 30 randomized DBCT cases that contained marked lesions. Thirty-four lesions were included in this study: 24 (70.6%) masses, 7 (20.6%) calcifications, and 3 (8.8%) architectural distortions. Eight (23.5%) lesions were malignant and 26 (76.5%) were benign. The reader was asked to specify according to the BI-RADS Mammography Atlas for each marked DBCT lesion: primary findings, features, breast density, and final assessment. We calculated readers' diagnostic performances for differentiating between benign and malignant lesions and interobserver variability for reporting and assessing lesions using a generalized estimating equation and the Fleiss kappa (κ) statistic. Results The estimated overall sensitivity of the readers was 0.969, and the specificity was 0.529. There were no significant differences in the sensitivity and the specificity between lesion types. For reporting the presence of a primary finding, the overall substantial agreement (κ = 0.70) was seen. In assigning the breast density and the final assessment, the overall agreement was moderate (κ = 0.53) and fair (κ = 0.30). Conclusion The use of the BI-RADS Mammography Atlas 5th Edition for DBCT showed high performance and good agreement among readers.

PurposeThe purpose of this study is to determine the optimal representative reconstruction and quantitative image feature set for a computer-aided diagnosis (CADx) scheme for dedicated breast computer tomography (bCT).MethodWe used 93 bCT scans that contain 102 breast lesions (62 malignant, 40 benign). Using an iterative image reconstruction (IIR) algorithm, we created 37 reconstructions with different image appearances for each case. In addition, we added a clinical reconstruction for comparison purposes. We used image sharpness, determined by the gradient of gray value in a parenchymal portion of the reconstructed breast, as a surrogate measure of the image qualities/appearances for the 38 reconstructions. After segmentation of the breast lesion, we extracted 23 quantitative image features. Using leave-one-out-cross-validation (LOOCV), we conducted the feature selection, classifier training, and testing. For this study, we used the linear discriminant analysis classifier. Then, we selected the representative reconstruction and feature set for the classifier with the best diagnostic performance among all reconstructions and feature sets. Then, we conducted an observer study with six radiologists using a subset of breast lesions (N=50). Using 1000 bootstrap samples, we compared the diagnostic performance of the trained classifier to those of the radiologists.ResultThe diagnostic performance of the trained classifier increased as the image sharpness of a given reconstruction increased. Among combinations of reconstructions and quantitative image feature sets, we selected one of the sharp reconstructions and three quantitative image feature sets with the first three highest diagnostic performances under LOOCV as the representative reconstruction and feature set for the classifier. The classifier on the representative reconstruction and feature set achieved better diagnostic performance with an area under the ROC curve (AUC) of 0.94 (95% CI=[0.81, 0.98]) than those of the radiologists, where their maximum AUC was 0.78 (95% CI=[0.63, 0.90]). Moreover, the partial AUC, at 90% sensitivity or higher, of the classifier (pAUC= 0.085 with 95% CI=[0.063, 0.094]) was statistically better (P-value&nbsp

The dedicated cone-beam breast computed tomography (CBBCT) is a new and promising imaging modality which provides isotropic, 3D images of the breast with high spatial and contrast resolution. Non-contrast and contrast-enhanced CBBCT (CE-CBBCT) was superior to mammography for the visualization of breast masses, especially in patients with dense breast tissue. CE-CBBCT accurately detects DCIS and distinguishes it from benign causes of microcalcifications when compared with non-contrast CBBCT and mammography. The purpose of this report is to describe the technology and its possible indications, and to present the first results from recent clinical studies, illustrating these with our own image examples.

The value of cone beam breast computed tomography (CBBCT) imaging on covered areas of breast tissue, which is the relation between imaging quality and CT dose were studied. Multi-energy spectrum was used to radiate same-size built-in calcifications and lump breast motifs under the condition of the same number of particles by utilizing the Monte Carlo-based GATE simulation software; breast motif images were restructured by using FBP restructuration algorithm to gain the distribution of radiation dose in the breast motif; radiation dose was calculated and signal-to-noise ratio (SNR) to define how quality factor M and dose efficiency η reflect the relations between radiation dose and imaging quality. Based on the comparison of the calcification number, diameter, and the diameter of tumor among head side, foot side, inner side, outer side and rear side, the difference was meaningless in terms of statistics. Based on the comparison between SNR and contrast-to-noise ratio and between dose efficiency η and quality factor M in different areas, the difference was not statistically significant. In conclusion, the imaging quality of CBBCT was good in the head, foot, inner, outer and rear sides of breast, with acceptable CT dose.

The original version of this article, published on 03 January 2020, unfortunately contained two mistakes.

We propose a novel approach for the fabrication of realistic in shape, size as well as in x-ray absorption properties 3D physical breast models. The approach eliminates the need for segmentation of breast tissues by directly mimicking the radiodensity of each voxel in a computed tomography (CT) image. This is done through a recently published study that enables the use of variable filament extrusion rate when creating 3D phantoms with fused deposition modeling printers. We use the CT image of a real patient’s breast to produce a model through the suggested approach. We then validate the fabricated physical breast phantom by obtaining a CT scan of it and comparing the latter to the original CT image of the source patient’s breast.

The limits of mammography have led to an increasing interest on possible alternatives such as the breast Computed Tomography (bCT). The common goal of all X-ray imaging techniques is to achieve the optimal contrast resolution, measured through the Contrast to Noise Ratio (CNR), while minimizing the radiological risks, quantified by the dose. Both dose and CNR depend on the energy and the intensity of the X-rays employed for the specific imaging technique. Some attempts to determine an optimal energy for bCT have suggested the range 22 keV–34 keV, some others instead suggested the range 50 keV–60 keV depending on the parameters considered in the study. Recent experimental works, based on the use of monochromatic radiation and breast specimens, show that energies around 32 keV give better image quality respect to setups based on higher energies. In this paper we report a systematic study aiming at defining the range of energies that maximizes the CNR at fixed dose in bCT. The study evaluates several compositions and diameters of the breast and includes various reconstruction algorithms as well as different dose levels. The results show that a good compromise between CNR and dose is obtained using energies around 28 keV.

Breast conserving surgery followed by radiotherapy is the standard of care for early-stage breast cancer patients. Deformable image registration (DIR) can in principle be of great value for accurate localization of the original tumor site to optimize breast irradiation after surgery. However, current state-of-the-art DIR methods are not very successful when tissue is present in one image but not in the other (i.e., in case of content mismatch). To tackle this challenge, we combined a multi-objective DIR approach with simulated tissue removal. Parameters defining the area to be removed as well as key DIR parameters (that are often tuned manually for each DIR case) are determined by a multi-objective optimization process. In multi-objective optimization, not one, but a set of solutions is found, that represent high-quality trade-offs between objectives of interest. We used three state-of-the-art multi-objective evolutionary algorithms as meta-optimizers to search for the optimal parameters, and tested our approach on four test cases of computed tomography (CT) images of breast cancer patients before and after surgery. Results show that using meta-optimization with simulated tissue removal improves the performance of DIR. This way, sets of high-quality solutions could be obtained with a mean target registration error of 2.4 mm over four test cases and an estimated excised volume that is within 20% from the measured volume of the surgical resection specimen.

We propose an algorithm to recognize breast parenchyma regions containing mass-like abnormalities in dedicated breast CT images using texture feature descriptors. From 53 patient breast CT scans (29 of which containing masses), we first isolated the parenchyma through automatic segmentation, and we obtained a total of 14,751 normal 2D image patches (negatives), and 2,100 containing a breast mass (positives). We extracted 141 texture features (10 first-order descriptors, 6 Haralick features, 20 run-length features, 45 structural and pattern descriptors, 60 Gabor features), which we then analyzed through multivariate analysis of variance (MANOVA) and linear discriminant analysis, resulting in an area under the ROC curve (AUC) of 0.9. We finally identified the most discriminant features through sequential forward selection, and used them to train and validate a neural network by dividing the data into multiple batches, with each batch always containing the whole set of positive cases, and as many different negative examples. To avoid the possible bias due to the high skewness in class proportion, the training was performed on all these batches independently, without re-initializing the network weights after each training. The network was tested using an additional independent 18 patient breast CT scans (8 normal and 10 containing a mass), on a total of 7,274 image patches (852 positives, 6,422 negatives) which were not used during the training/validation phase, resulting in 95.6% precision, 95.8% recall, and 0.99 AUC. Our results suggest that the proposed approach could be further evaluated and expanded for computer-aided detection tasks in breast CT imaging.

In this work, we proposed a non-linear observer model based on convolutional neural network and compare its performance with LG-CHO for four alternative forced choice detection task using simulated breast CT images. In our network, each convolutional layer contained 3×3 filters and a leaky-ReLU as an activation function, but a pooling layer and a zero padding to the output of each convolutional layer were not used unlike general convolutional neural network. Network training was conducted using ADAM optimizer with two design parameters (i.e., network depth and width). The optimal value of the design parameter was found by brute force searching, which spanned up to 30 for depth and 128 for channel, respectively. To generate training and validation dataset, we generated anatomical noise images using a power law spectrum of breast anatomy. 50% volume glandular fraction was assumed, and 1 mm diameter signal was used for detection task. The generated images were recon- structed using filtered back-projection with a fan beam CT geometry, and ramp and Hanning filters were used as an apodization filter to generate different noise structures. To train our network, 125,000 signal present images and 375,000 signal absent images were reconstructed for each apodization filter. To measure detectability, we used percent correction with 4,000 images, generated independently from training and validation dataset. Our results show that the proposed network composed of 30 layers and 64 channels provides higher detectability than LG-CHO. We believe that the improved detectability is achieved by the presence of the non-linear module (i.e., leaky-ReLU) in the network.

This work demonstrates the potential for using a deformable mapping method to register lesions between dedicated breast computed tomography (bCT) and both automated breast ultrasound (ABUS) and digital breast tomosynthesis (DBT) images (craniocaudal [CC] and mediolateral oblique [MLO] views). Two multi-modality breast phantoms with external fiducial markers attached were imaged by the three modalities. The DBT MLO view was excluded for the second phantom. The automated deformable mapping algorithm uses biomechanical modeling to determine corresponding lesions based on distances between their centers of mass (dCOM) in the deformed bCT model and the reference model (DBT or ABUS). For bCT to ABUS, the mean dCOM was 5.2 ± 2.6 mm. For bCT to DBT (CC), the mean dCOM was 5.1 ± 2.4 mm. For bCT to DBT (MLO), the mean dCOM was 4.7 ± 2.5 mm. This application could help improve a radiologist's efficiency and accuracy in breast lesion characterization, using multiple imaging modalities.

In this study we demonstrate the first direct comparison between synchrotron x-ray propagation-based CT (PB-CT) and cone-beam breast-CT (CB-CT) on human mastectomy specimens (N = 12) including different benign and malignant lesions. The image quality and diagnostic power of the obtained data sets were compared and judged by two independent expert radiologists. Two cases are presented in detail in this paper including a comparison with the corresponding histological evaluation. Results indicate that with PB-CT it is possible to increase the level of contrast-to-noise ratio (CNR) keeping the same level of dose used for the CB-CT or achieve the same level of CNR reached by CB-CT at a lower level of dose. In other words, PB-CT can achieve a higher diagnostic potential compared to the commercial breast-CT system while also delivering a considerably lower mean glandular dose. Therefore, we believe that PB-CT technique, if translated to a clinical setting, could have a significant impact in improving breast cancer diagnosis.

A quantitative characterization of the soft tissues composing the human breast is achieved by means of a monochromatic CT phase-contrast imaging system, through accurate measurements of their attenuation coefficients within the energy range of interest for breast CT clinical examinations. Quantitative measurements of linear attenuation coefficients are performed on tomographic reconstructions of surgical samples, using monochromatic x-ray beams from a synchrotron source and a free space propagation setup. An online calibration is performed on the obtained reconstructions, in order to reassess the validity of the standard calibration procedure of the CT scanner. Three types of healthy tissues (adipose, glandular, and skin) and malignant tumors, when present, are considered from each sample. The measured attenuation coefficients are in very good agreement with the outcomes of similar studies available in the literature, although they span an energy range that was mostly neglected in the previous studies. No globally significant differences are observed between healthy and malignant dense tissues, although the number of considered samples does not appear sufficient to address the issue of a quantitative differentiation of tumors. The study assesses the viability of the proposed methodology for the measurement of linear attenuation coefficients, and provides a denser sampling of attenuation data in the energy range useful to breast CT.

In this study we compared the image quality of a synchrotron radiation (SR) breast computed tomography (BCT) system with a clinical BCT in terms of contrast-to-noise ratio (CNR), signal-to-noise ratio (SNR), noise power spectrum (NPS), spatial resolution and detail visibility. A breast phantom consisting of several slabs of breast-adipose equivalent material with different embedded targets (i.e., masses, fibers and calcifications) was used. Phantom images were acquired using a dedicated BCT system installed at the Radboud University Medical Center (Nijmegen, The Netherlands) and the SR BCT system at the SYRMEP beamline of Elettra SR facility (Trieste, Italy) based on a photon-counting detector. Images with the SR setup were acquired mimicking the clinical BCT conditions (i.e., energy of 30 keV and radiation dose of 6.5 mGy). Images were reconstructed with an isotropic cubic voxel of 273 µm for the clinical BCT, while for the SR setup two phase-retrieval (PhR) kernels (referred to as “smooth” and “sharp”) were alternatively applied to each projection before tomographic reconstruction, with voxel size of 57 × 57 × 50 µm3. The CNR for the clinical BCT system can be up to 2-times higher than SR system, while the SNR can be 3-times lower than SR system, when the smooth PhR is used. The peak frequency of the NPS for the SR BCT is 2 to 4-times higher (0.9 mm−1 and 1.4 mm−1 with smooth and sharp PhR, respectively) than the clinical BCT (0.4 mm−1). The spatial resolution (MTF10%) was estimated to be 1.3 lp/mm for the clinical BCT, and 5.0 lp/mm and 6.7 lp/mm for the SR BCT with the smooth and sharp PhR, respectively. The smallest fiber visible in the SR BCT has a diameter of 0.15 mm, while for the clinical BCT is 0.41 mm. Calcification clusters with diameter of 0.13 mm are visible in the SR BCT, while the smallest diameter for the clinical BCT is 0.29 mm. As expected, the image quality of the SR BCT outperforms the clinical BCT system, providing images with higher spatial resolution and SNR, and with finer granularity. Nevertheless, this study assesses the image quality gap quantitatively, giving indications on the benefits associated with SR BCT and providing a benchmarking basis for its clinical implementation. In addition, SR-based studies can provide a gold-standard in terms of achievable image quality, constituting an upper-limit to the potential clinical development of a given technique.

Digital phantoms are important tools for optimization and evaluation of x-ray imaging systems, and should ideally reflect the 3D structure of human anatomy and its potential variability. In addition, they need to include a good level of detail at a high enough spatial resolution to accurately model the continuous nature of the human anatomy. A pipeline to increase the spatial resolution of patient-based digital breast phantoms that can be used for computer simulations of breast imaging is proposed. Given a tomographic breast image of finite resolution, the proposed methods can generate a phantom and increase its resolution at will, not only simply through super-sampling, but also by generating additional random glandular details to account for glandular edges and strands to compensate for those that may have not been detected in the original image due to the limited spatial resolution of the imaging system used. The proposed algorithms use supervised learning to predict the loss in glandularity due to limited resolution, and then to realistically recover this loss by learning the mapping between low and high resolution images. They were trained on high-resolution synchrotron images (detector pixel size 60 μm) reconstructed at seven voxel dimensions (60 μm-480 μm), and applied to patient images acquired with a clinical breast CT system (detector pixel size 194 μm) to generate super-resolution phantoms (voxel sizes 68 μm). Several evaluations were made to assess the appropriateness of the developed methods, both with the synchrotron (relative prediction error 0.010 ± 0.004, recovering accuracy 0.95 ± 0.04), and with the clinical images (average glandularity error at 194 μm: 0.15% ± 0.12%). Finally, a breast radiologist assessed the realism of the developed phantoms by blindly comparing original and phantom images, resulting in not being able to distinguish the real from the phantom images. In conclusion, the proposed method can generate super-resolution phantoms from tomographic breast patient images that can be used for future computer simulations for optimization of new breast imaging technologies.

The inadequate visibility of microcalcifications-small calcium deposits that cue radiologists to early stages of cancer-is a major limitation in current designs of dedicated breast computed tomography (bCT). This limitation has previously been attributed to the constituent components, spatial resolution, and utilized dose. Scattered radiation has been considered an occurrence with low-frequency impacts that can be compensated for in post-processing. We hypothesized, however, that the acquisition of scattered radiation has a far more detrimental impact on clinically relevant features than has previously been understood. Critically, acquisition of scatter leads to the reduced visibility of microcalcifications. This hypothesis was investigated and supported via mathematical derivations and simulation studies. We conducted a series of comparative studies in which four bCT systems were simulated under iso-dose and iso-resolution conditions, characterizing the dependencies of microcalcification contrast on accumulated scatter. Included among the simulated systems is a novel bCT design-narrow beam bCT (NB-bCT)-that captures nearly zero scatter. We find that current bCT systems suffer from significant levels of scatter. As validated in theory, depending on the system and size of microcalcifications, between 25% and over 70% of contrast resolution is lost due to scatter. The results in NB-bCT, however, provide evidence that by removing scatter build-up in projections, the contrast of microcalcifications in a bCT image is preserved, regardless of their size or location in the breast.

Mammography has been the mainstay of breast imaging for over four decades and is the only screening modality demonstrated to reduce mortality from breast cancer. The known limitations of mammography have prompted the development of newer imaging techniques with three-dimensional capabilities such as dedicated breast computed tomography (bCT). Several studies have shown the superiority of bCT in detection of breast masses, when compared to 2-D mammography. Malignant micro-calcification lesions can be detected and characterized by bCT. With further development of higher resolution detectors, bCT should become a modality for large population screening. Contrast-enhanced bCT (CE-bCT) adds improved specificity over mammography and may be utilized as an imaging biomarker in the emerging era of precision medicine.

PurposeCompare conspicuity of ductal carcinoma in-situ (DCIS) to benign calcifications on unenhanced (bCT), contrast-enhanced dedicated breast CT (CEbCT) and mammography (DM).Methods and materialsThe institutional review board approved this HIPAA-compliant study. 42 women with Breast Imaging Reporting and Data System 4 or 5 category micro-calcifications had breast CT before biopsy. Three subjects with invasive disease at surgery were excluded. Two breast radiologists independently compared lesion conspicuity scores (CS) for CEbCT, to bCT and DM. Enhancement was measured in Hounsfield units (HU). Mean CS ± standard deviations are shown. Receiver operating characteristic analysis (ROC) measured radiologists' discrimination performance by comparing CS to enhancement alone. Statistical measurements were made using ANOVA F-test, Wilcoxon rank-sum test and robust linear regression analyses.Results39 lesions (17 DCIS, 22 benign) were analyzed. DCIS (8.5 ± 0.9, n=17) was more conspicuous than benign micro-calcifications (3.6 ± 2.9, n=22; p

With the rapid development of intelligent diagnostic medical imaging, artificial intelligent methods have become a research hotspot in this field with the rapid development of medical imaging intelligent diagnosis. The new research progress of artificial intelligence in medical image processing in recent five years is discussed. This paper discussed the function of medical image mining in computer-aided diagnoses. The idea of using luminance grade as the features of CT image and the method of extracting and storing the luminance grade are proposed. The results of classification based on decision tree and clustering based on density to some brain and breast CT images and the analysis to them are introduced. Moreover, the conclusion and future work are given.

Purpose: To provide mean glandular dose (MGD) estimates via Monte Carlo (MC) simulations as a function of the breast models and scan parameters in mammography, digital breast tomosynthesis (DBT) and dedicated breast CT (BCT). Methods: The MC code was based on GEANT4 toolkit. The simulated compressed breast was either a cylinder with a semi-circular section or ad hoc shaped for oblique view (MLO). In DBT we studied the influence of breast models and exam parameters on the T-factors (i.e. the conversion factor for the calculation of the MGD in DBT from that for a 0-degree projection), and in BCT we investigated the influence on the MGD estimates of the ion chamber volume used for the air kerma measurements. Results: In mammography, a model representative of a breast undergoing an MLO view exam did not produce substantial differences (0.4%) in MGD estimates, when compared to a conventional cranio-caudal (CC) view breast model. The beam half value layer did not present a significant influence on T-factors in DBT (< 0.8%), while the skin model presented significant influence on MGD estimates (up to 3.3% at 30 degrees scan angle), increasing for larger scan angles. We derived a correction factor for taking into account the different ion chamber volume used in MGD estimates in BCT. Conclusions: A series of MC code modules for MGD estimates in 2D and 3D breast imaging have been developed in order to take into account the most recent advances in breast models.

In previous work, we generated computational breast phantoms by using a principal component analysis (PCA) or "Eigenbreast" technique. For this study, we sought to address resolution limitations in the previous synthesized breast phantoms by analyzing new human subject data set with higher resolution. We utilize PCA to sample input breast cases, then by using weighted sums along the different eigenvectors or "eigenbreasts," a number of new cases can be generated. While breasts can vary in structure and form, we used a series of compressed breasts derived from human subject breast CT volumes to create the eigenbreasts. We used an initial set of thirty-five phantoms from a new CT patient population with 155x155x155 μm3 voxel size. The training set and synthetized phantoms were evaluated by power law exponent β and changes in volumetric breast density as a result of the PCA process. The synthetic phantoms were found to have similar β and fibroglandular density distributions to the training dataset. Individual synthetic phantoms appeared to capture glandular features present in the training phantoms but had visually different texture features. This work shows that earlier work on the eigenbreast technique can be extended to newer datasets with higher resolution and produce synthetic phantoms that retain the quantitative properties of training data.

The breast phantoms currently available for evaluating full field digital mammography (FFDM), digital breast tomosynthesis (DBT), and breast CT (bCT) systems often lack the complexity present in real breasts. In this work we present a new methodology for creating physical anthropomorphic breast phantoms for use in FFDM, DBT, and dedicated bCT systems using zinc acetate-doped ink. First, an uncompressed virtual phantom was created through analytical modeling. The model represented a breast with 28% fibroglandular density with 13 tissue classes and contained a 5 mm lesion. The breast was binarized to two tissue classes: adipose and fibroglandular tissue. The phantom was then realized through inkjet printing using dye ink doped with zinc acetate for the fibroglandular components and three candidate materials for the adipose background: parchment paper, organic paper, and office paper. The fabrication process was evaluated in terms of material realism and reproducibility using spectroscopy, a clinical FFDM system, and a benchtop bCT system. The linear attenuation coefficient of the doped ink plus parchment paper and parchment paper alone closely matched those of the fibroglandular and adipose tissues, respectively. A methodology for generating anthropomorphic breast phantoms was developed using a novel inkjet printing technique for use in FFDM/DBT, as well as dedicated breast CT systems. A novel uncompressed breast phantom for bCT was fabricated using inexpensive, easily available materials with realistic tissue properties.

Purpose: In cone-beam computed tomography dedicated to the breast (BCT), the mean glandular dose (MGD) is the dose metric of reference, evaluated from the measured air kerma by means of normalized glandular dose coefficients (DgNCT). This work aimed at computing, for a simple breast model, a set of DgNCT values for monoenergetic and polyenergetic X-ray beams, and at validating the results vs. those for patient specific digital phantoms from BCT scans. Methods: We developed a Monte Carlo code for calculation of monoenergetic DgNCT coefficients (energy range 4.25–82.25 keV). The pendant breast was modelled as a cylinder of a homogeneous mixture of adipose and glandular tissue with glandular fractions by mass of 0.1%, 14.3%, 25%, 50% or 100%, enveloped by a 1.45 mmthick skin layer. The breast diameter ranged between 8 cm and 18 cm. Then, polyenergetic DgNCT coefficients were analytically derived for 49-kVp W-anode spectra (half value layer 1.25–1.50mm Al), as in a commercial BCT scanner. We compared the homogeneous models to 20 digital phantoms produced from classified 3D breast images. Results: Polyenergetic DgNCT resulted 13% lower than most recent published data. The comparison vs. patient specific breast phantoms showed that the homogeneous cylindrical model leads to a DgNCT percentage difference between −15% and +27%, with an average overestimation of 8%. Conclusions: A dataset of monoenergetic and polyenergetic DgNCT coefficients for BCT was provided. Patient specific breast models showed a different volume distribution of glandular dose and determined a DgNCT 8% lower, on average, than homogeneous breast model.

Background The SYRMA-3D collaboration is setting up the first clinical trial of phase-contrast breast CT with synchrotron radiation at the Elettra synchrotron facility in Trieste, Italy. In this communication, a quality control protocol for breast CT is proposed, and a first test of image quality measurements is performed by means of a custom-made radiographic phantom. Materials and methods A set of projections is acquired and used to perform a CT reconstruction of two selected portions of the phantom. Such portions contain a uniform layer of water and a set of radiographic inserts, respectively. Together, they allow to perform several image quality measurements, namely CT number linearity, reconstruction accuracy, uniformity, noise, and low contrast resolution. All measurements are repeated at different beam energies in the range of interest, and at two different dose values. Results Measurements show a good linearity in the soft tissue range, paired to a high accuracy of the CT number reconstruction. Uniformity and noise measurements show that reconstruction inhomogeneities are bound to a few percent of the average pixel values. However, low contrast detectability is limited to the higher portion of the explored energy range. Conclusions The results of the measurements are satisfactory in terms of their quality, feasibility and reproducibility. With minimal modifications, the phantom is promising to allow a set of image quality measurements to be used in the upcoming clinical trial.

X-ray phase imaging has the potential to dramatically improve soft tissue contrast sensitivity, which is a crucial requirement in many diagnostic applications such as breast imaging. In this context, a program devoted to perform in vivo phase-contrast synchrotron radiation breast computed tomography is ongoing at the Elettra facility (Trieste, Italy). The used phase-contrast technique is the propagation-based configuration, which requires a spatially coherent source and a sufficient object-to-detector distance. In this work the effect of this distance on image quality is quantitatively investigated scanning a large breast surgical specimen at three object-to-detector distances (1.6, 3, 9 m) and comparing the images both before and after applying the phase-retrieval procedure. The sample is imaged at 30 keV with a [Formula: see text] pixel pitch CdTe single-photon-counting detector, positioned at a fixed distance of 31.6 m from the source. The detector fluence is kept constant for all acquisitions. The study shows that, at the largest distance, a 20-fold SNR increase can be obtained by applying the phase-retrieval procedure. Moreover, it is shown that, for phase-retrieved images, changing the object-to-detector distance does not affect spatial resolution while boosting SNR (four-fold increase going from the shortest to the largest distance). The experimental results are supported by a theoretical model proposed by other authors, whose salient results are presented in this paper.

We proposed the neutrosophic approach for segmenting breast lesions in breast computed tomography (bCT) images. The neutrosophic set considers the nature and properties of neutrality (or indeterminacy). We considered the image noise as an indeterminate component while treating the breast lesion and other breast areas as true and false components. We iteratively smoothed and contrast-enhanced the image to reduce the noise level of the true set. We then applied one existing algorithm for bCT images, the RGI segmentation, on the resulting noise-reduced image to segment the breast lesions. We compared the segmentation performance of the proposed method (named as NS-RGI) to that of the regular RGI segmentation. We used 122 breast lesions (44 benign and 78 malignant) of 111 noncontrast enhanced bCT cases. We measured the segmentation performances of the NS-RGI and the RGI using the Dice coefficient. The average Dice values of the NS-RGI and RGI were 0.82 and 0.80, respectively, and their difference was statistically significant ([Formula: see text]). We conducted a subsequent feature analysis on the resulting segmentations. The classifier performance for the NS-RGI ([Formula: see text]) improved over that of the RGI ([Formula: see text] , [Formula: see text]).