Search

In this paper, we perform a stability analysis for classes of second and third order accurate strong-stability-preserving modified Patankar–Runge–Kutta (SSPMPRK) schemes, which were introduced in Huang and Shu [J. Sci. Comput. 78 (2019) 1811–1839] and Huang et al. [J. Sci. Comput. 79 (2019) 1015–1056] and can be used to solve convection equations with stiff source terms, such as reactive Euler equations, with guaranteed positivity under the standard CFL condition due to the convection terms only. The analysis allows us to identify the range of free parameters in these SSPMPRK schemes in order to ensure stability. Numerical experiments are provided to demonstrate the validity of the analysis.

Recent decades have seen increasing concerns regarding air quality in housing locations. This study proposes a predictive continuum dynamic user-optimal model with combined choice of housing location, destination, route, and departure time. A traveler’s choice of housing location is modeled by a logit-type demand distribution function based on air quality, housing rent, and perceived travel costs. Air quality, or air pollutants, within the modeling region are governed by the vehicle-emission model and the advection-diffusion equation for dispersion. In this study, the housing-location problem is formulated as a fixed-point problem and the predictive continuum dynamic user-optimal model with departure-time consideration is formulated as a variational inequality problem. The Lax-Friedrichs scheme, the fast-sweeping method, the Goldstein-Levitin-Polyak projection algorithm, and self-adaptive successive averages are adopted to discretize and solve these problems. A numerical example is given to demonstrate the characteristics of the proposed housing-location choice problem with consideration of air quality and to demonstrate the effectiveness of the solution algorithms.

In this paper, we consider the linear convection-diffusion equation in one dimension with periodic boundary conditions, and analyze the stability of fully discrete methods that are defined with local discontinuous Galerkin (LDG) methods in space and several implicit-explicit (IMEX) Runge-Kutta methods in time. By using the forward temporal differences and backward temporal differences, respectively, we establish two general frameworks of the energy-method based stability analysis. From here, the fully discrete schemes being considered are shown to have monotonicity stability, i.e. the L 2 L^2 norm of the numerical solution does not increase in time, under the time step condition τ ≤ F ( h / c , d / c 2 ) \tau \le \mathcal {F}(h/c, d/c^2) , with the convection coefficient c c , the diffusion coefficient d d , and the mesh size h h . The function F \mathcal {F} depends on the specific IMEX temporal method, the polynomial degree k k of the discrete space, and the mesh regularity parameter. Moreover, the time step condition becomes τ ≲ h / c \tau \lesssim h/c in the convection-dominated regime and it becomes τ ≲ d / c 2 \tau \lesssim d/c^2 in the diffusion-dominated regime. The result is improved for a first order IMEX-LDG method. To complement the theoretical analysis, numerical experiments are further carried out, leading to slightly stricter time step conditions that can be used by practitioners. Uniform stability with respect to the strength of the convection and diffusion effects can especially be relevant to guide the choice of time step sizes in practice, e.g. when the convection-diffusion equations are convection-dominated in some sub-regions.

In this paper, we study the error estimates to sufficiently smooth solutions of the nonlinear scalar conservation laws for the semi-discrete central discontinuous Galerkin (DG) finite element methods on uniform Cartesian meshes. A general approach with an explicitly checkable condition is established for the proof of optimal L2 error estimates of the semi-discrete CDG schemes, and this condition is checked to be valid in one and two dimensions for polynomials of degree up to k = 8. Numerical experiments are given to verify the theoretical results.

Fixed-point fast sweeping WENO methods are a class of efficient high-order numerical methods to solve steady-state solutions of hyperbolic partial differential equations (PDEs). The Gauss-Seidel iterations and alternating sweeping strategy are used to cover characteristics of hyperbolic PDEs in each sweeping order to achieve fast convergence rate to steady-state solutions. A nice property of fixed-point fast sweeping WENO methods which distinguishes them from other fast sweeping methods is that they are explicit and do not require inverse operation of nonlinear local systems. Hence, they are easy to be applied to a general hyperbolic system. To deal with the difficulties associated with numerical boundary treatment when high-order finite difference methods on a Cartesian mesh are used to solve hyperbolic PDEs on complex domains, inverse Lax-Wendroff (ILW) procedures were developed as a very effective approach in the literature. In this paper, we combine a fifth-order fixed-point fast sweeping WENO method with an ILW procedure to solve steady-state solution of hyperbolic conservation laws on complex computing regions. Numerical experiments are performed to test the method in solving various problems including the cases with the physical boundary not aligned with the grids. Numerical results show high-order accuracy and good performance of the method. Furthermore, the method is compared with the popular third-order total variation diminishing Runge-Kutta (TVD-RK3) time-marching method for steady-state computations. Numerical examples show that for most of examples, the fixed-point fast sweeping method saves more than half CPU time costs than TVD-RK3 to converge to steady-state solutions.

The discontinuous Galerkin (DG) method is widely used in numerical solution of partial differential equations, especially for hyperbolic equations. However, for problems containing strong shocks, the DG method often needs to be supplemented by a limiter to control spurious oscillations and to ensure nonlinear stability. The total variation bounded (TVB) limiter is a popular choice and can maintain the original high order accuracy of the DG scheme in smooth regions and keep a sharp and non-oscillatory discontinuity transition, when a certain TVB constant M is chosen adequately. For scalar conservation laws, suitable choice of this constant M can be based on solid mathematical analysis. However, for nonlinear hyperbolic systems, there is no rigorous mathematical guiding principle for the determination of this constant, and numerical experiments often use ad hoc choices based on experience and through trial and error. In this paper, we develop a TVB constant artificial neural network (ANN) based estimator by constructing a multi-layer perceptron (MLP) model. We generate the training data set by constructing piecewise smooth functions containing local maxima, local minima, and discontinuities. By using the supervised learning strategy, the MLP model is trained offline. The proposed method gives the TVB constant M with robust performance to capture sharp and non-oscillatory shock transitions while maintaining the original high order accuracy in smooth regions. Numerical results using this new estimator in the TVB limiter for DG methods in one and two dimensions are given, and its performance is compared with the classical ad hoc choices of this TVB constant.

Robust numerical methods for CFD applications, such as WENO schemes, quickly evolved in the past few decades. Together with the Inverse Lax–Wendroff (ILW) procedure, WENO ideas were also applied in the boundary treatment. Those methods are known for their high-resolution property, i.e., good representation of nonlinear phenomena, which is an important property in solving challenging engineering problems. In light of that, the objective of this work is to present a review of well-established high-resolution numerical methods to solve the Euler equations and adapt the Navier–Stokes viscous terms discretization and boundary treatment. To test the modifications, we employed the positivity-preserving Lax–Friedrichs splitting, multi-resolution WENO scheme, third-order strong stability preserving Runge–Kutta time discretization, and ILW boundary treatment. The first problems were simple flows with analytical solutions for accuracy tests. We also tested the accuracy with nontrivial phenomena in the vortex flow. Oblique shock and complicated flow structures were captured in the Rayleigh–Taylor instability and flow past a cylinder. We showed the discretization and boundary treatment can handle non-constant viscosity, are high-order, high-resolution, and behave similarly to the well-established numerical methods. Furthermore, the methods discussed here can preserve symmetry and no approximations regarding the boundary layer were made. Therefore, the discretization and boundary treatment can be considered when solving direct numerical simulations.

Since the classical WENO schemes [27] might suffer from slight post-shock oscillations (which are responsible for the numerical residual to hang at a truncation error level) and the new high-order multi-resolution WENO schemes [59] are successful to solve for steady-state problems, we apply these high-order finite volume multi-resolution WENO techniques to serve as limiters for high-order Runge-Kutta discontinuous Galerkin (RKDG) methods in simulating steady-state problems. Firstly, a new troubled cell indicator is designed to precisely detect the cells which would need further limiting procedures. Then the high-order multi-resolution WENO limiting procedures are adopted on a sequence of hierarchical L 2 projection polynomials of the DG solution within the troubled cell itself. By doing so, these RKDG methods with multi-resolution WENO limiters could gradually degrade from the optimal high-order accuracy to the first-order accuracy near strong discontinuities, suppress the slight post-shock oscillations, and push the numerical residual to settle down to machine zero in steady-state simulations. These new multi-resolution WENO limiters are very simple to construct and can be easily implemented to arbitrary high-order accuracy for solving steady-state problems in multi-dimensions.

In this article, we introduce a new WENO algorithm that aims to calculate an approximation to derivative values of a function in a non-regular grid. We adapt the ideas presented in [Amat et al., SIAM J. Numer. Anal. (2020)] to design the nonlinear weights in a manner such that the order of accuracy is maximum in the intervals close to the discontinuities. Some proofs, remarks on the choice of the stencils and explicit formulas for the weights and smoothness indicators are given. We also present some numerical experiments to confirm the theoretical results.

We propose and analyze a class of robust, uniformly high-order accurate discontinuous Galerkin (DG) schemes for multidimensional relativistic magnetohydrodynamics (RMHD) on general meshes. A distinct feature of the schemes is their physical-constraint-preserving (PCP) property, i.e., they are proven to preserve the subluminal constraint on the fluid velocity and the positivity of density, pressure, and internal energy. This is the first time that provably PCP high-order schemes are achieved for multidimensional RMHD. Developing PCP high-order schemes for RMHD is highly desirable but remains a challenging task, especially in the multidimensional cases, due to the inherent strong nonlinearity in the constraints and the effect of the magnetic divergence-free condition. Inspired by some crucial observations at the PDE level, we construct the provably PCP schemes by using the locally divergence-free DG schemes of the recently proposed symmetrizable RMHD equations as the base schemes, a limiting technique to enforce the PCP property of the DG solutions, and the strong-stability-preserving methods for time discretization. We rigorously prove the PCP property by using a novel “quasi-linearization” approach to handle the highly nonlinear physical constraints, technical splitting to offset the influence of divergence error, and sophisticated estimates to analyze the beneficial effect of the additional source term in the symmetrizable RMHD system. Several two-dimensional numerical examples are provided to further confirm the PCP property and to demonstrate the accuracy, effectiveness and robustness of the proposed PCP schemes.

In this paper we propose and analyze finite element discontinuous Galerkin methods for the one- and two-dimensional stochastic Maxwell equations with multiplicative noise. The discrete energy law of the semi-discrete DG methods were studied. Optimal error estimate of the semi-discrete method is obtained for the one-dimensional case, and the two-dimensional case on both rectangular meshes and triangular meshes under certain mesh assumptions. Strong Taylor 2.0 scheme is used as the temporal discretization. Both one- and two-dimensional numerical results are presented to validate the theoretical analysis results.

In this paper, we propose a novel discontinuous Galerkin (DG) method to control the spurious oscillations when solving the scalar hyperbolic conservation laws. Usually, the high order linear numeri...

In this paper, we propose a local discontinuous Galerkin (LDG) method for nonlinear and possibly degenerate parabolic stochastic partial differential equations, which is a high-order numerical scheme. It extends the discontinuous Galerkin (DG) method for purely hyperbolic equations to parabolic equations and shares with the DG method its advantage and flexibility. We prove theL2-stability of the numerical scheme for fully nonlinear equations. Optimal error estimates (O(h(k+1))) for smooth solutions of semi-linear stochastic equations is shown if polynomials of degreekare used. We use an explicit derivative-free order 1.5 time discretization scheme to solve the matrix-valued stochastic ordinary differential equations derived from the spatial discretization. Numerical examples are given to display the performance of the LDG method.

When interpolating data with certain regularity, spline functions are useful. They are defined as piecewise polynomials that satisfy certain regularity conditions at the joints. In the literature about splines it is possible to find several references that study the apparition of Gibbs phenomenon close to jump discontinuities in the results obtained by spline interpolation. This work is devoted to the construction and analysis of a new nonlinear technique that allows to improve the accuracy of splines near jump discontinuities eliminating the Gibbs phenomenon. The adaption is easily attained through a nonlinear modification of the right hand side of the system of equations of the spline, that contains divided differences. The modification is based on the use of a new limiter specifically designed to attain adaption close to jumps in the function. The new limiter can be seen as a nonlinear weighted mean that has better adaption properties than the linear weighted mean. We will prove that the nonlinear modification introduced in the spline keeps the maximum theoretical accuracy in all the domain except at the intervals that contain a jump discontinuity, where Gibbs oscillations are eliminated. Diffusion is introduced, but this is fine if the discontinuity appears due to a discretization of a high gradient with not enough accuracy. The new technique is introduced for cubic splines, but the theory presented allows to generalize the results very easily to splines of any order. The experiments presented satisfy the theoretical aspects analyzed in the paper. We would like to thank the anonymous referees for their valuable comments, which have helped to significantly improve this work. This work was funded by project 20928/PI/18 (Proyecto financiado por la Comunidad Autónoma de la Región de Murcia a través de la convocatoria de Ayudas a proyectos para el desarrollo de investigación científica y técnica por grupos competitivos, incluida en el Programa Regional de Fomento de la Investigación Científica y Técnica (Plan de Actuación 2018) de la Fundación Séneca-Agencia de Ciencia y Tecnología de la Región de Murcia), by the national research project MTM2015- 64382-P (MINECO/FEDER) and by NSF grant DMS-1719410.

In this paper, we study the central discontinuous Galerkin (DG) method on overlapping meshes for second order wave equations. We consider the first order hyperbolic system, which is equivalent to the second order scalar equation, and construct the corresponding central DG scheme. We then provide the stability analysis and the optimal error estimates for the proposed central DG scheme for one- and multi-dimensional cases with piecewise Pk elements. The optimal error estimates are valid for uniform Cartesian meshes and polynomials of arbitrary degree k ≥ 0. In particular, we adopt the techniques in Liu et al. (SIAM J. Numer. Anal. 56 (2018) 520–541; ESAIM: M2AN 54 (2020) 705–726) and obtain the local projection that is crucial in deriving the optimal order of convergence. The construction of the projection here is more challenging since the unknowns are highly coupled in the proposed scheme. Dispersion analysis is performed on the proposed scheme for one dimensional problems, indicating that the numerical solution with P1 elements reaches its minimum with a suitable parameter in the dissipation term. Several numerical examples including accuracy tests and long time simulation are presented to validate the theoretical results.

In this work, we propose a novel framework for the numerical solution of time-dependent conservation laws with implicit schemes via primal-dual hybrid gradient methods. We solve an initial value problem (IVP) for the partial differential equation (PDE) by casting it as a saddle point of a min-max problem and using iterative optimization methods to find the saddle point. Our approach is flexible with the choice of both time and spatial discretization schemes. It benefits from the implicit structure and gains large regions of stability, and overcomes the restriction on the mesh size in time by explicit schemes from Courant--Friedrichs--Lewy (CFL) conditions (really via von Neumann stability analysis). Nevertheless, it is highly parallelizable and easy-to-implement. In particular, no nonlinear inversions are required! Specifically, we illustrate our approach using the finite difference scheme and discontinuous Galerkin method for the spatial scheme; backward Euler and backward differentiation formulas for implicit discretization in time. Numerical experiments illustrate the effectiveness and robustness of the approach. In future work, we will demonstrate that our idea of replacing an initial-value evolution equation with this primal-dual hybrid gradient approach has great advantages in many other situations.

In this paper, a high-order moment-based multi-resolution Hermite weighted essentially non-oscillatory (HWENO) scheme is designed for hyperbolic conservation laws. The main idea of this scheme is derived from our previous work [J. Comput. Phys., 446 (2021) 110653], in which the integral averages of the function and its first order derivative are used to reconstruct both the function and its first order derivative values at the boundaries. However, in this paper, only the function values at the Gauss-Lobatto points in the one or two dimensional case need to be reconstructed by using the information of the zeroth and first order moments. In addition, an extra modification procedure is used to modify those first order moments in the troubled-cells, which leads to an improvement of stability and an enhancement of resolution near discontinuities. To obtain the same order of accuracy, the size of the stencil required by this moment-based multi-resolution HWENO scheme is still the same as the general HWENO scheme and is more compact than the general WENO scheme. Moreover, the linear weights can also be any positive numbers as long as their sum equals one and the CFL number can still be 0.6 whether for the one or two dimensional case. Extensive numerical examples are given to demonstrate the stability and resolution of such moment-based multi-resolution HWENO scheme., 36pages, 8 figures

In this paper, we study superconvergence properties of the ultraweak-local discontinuous Galerkin (UWLDG) method in Tao et al. [To appear in Math. Comput. DOI: https://doi.org/10.1090/mcom/3562 (2020).] for an one-dimensional linear fourth-order equation. With special initial discretizations, we prove the numerical solution of the semi-discrete UWLDG scheme superconverges to a special projection of the exact solution. The order of this superconvergence is proved to be k + min(3, k) when piecewise ℙk polynomials with k ≥ 2 are used. We also prove a 2k-th order superconvergence rate for the cell averages and for the function values and derivatives of the UWLDG approximation at cell boundaries. Moreover, we prove superconvergence of (k + 2)-th and (k + 1)-th order of the function values and the first order derivatives of the UWLDG solution at a class of special quadrature points, respectively. Our proof is valid for arbitrary non-uniform regular meshes and for arbitrary k ≥ 2. Numerical experiments verify that all theoretical findings are sharp.

When solving CFD problems, the solver, or the numerical code, plays an important role. Depending on the phenomena and problem domain, designing such numerical codes can be hard work. One strategy is to start with simple problems and construct the code as building blocks. The purpose of this work is to provide a detailed review of the theory to compute analytical and exact solutions, and recent numerical methods to construct a code to solve compressible and inviscid fluid flows with high-resolution, arbitrary domains, non-linear phenomena, and on rectangular meshes. We also propose a modification to the inverse Lax–Wendroff procedure solid wall treatment and two-dimensional WENO-type extrapolation stencil selection and weights to handle more generic situations. To test our modifications, we use the finite difference method, Lax–Friedrichs splitting, WENO-Z+ scheme, and third-order strong stability preserving Runge-Kutta time discretization. Our first problem is a simple one-dimensional transient problem with periodic boundary conditions, which is useful for constructing the core solver. Then, we move to the one-dimensional Rayleigh flow, which can handle flows with heat exchange and requires more detailed boundary treatment. The next problem is the quasi-one-dimensional nozzle flow with and without shock, where the boundary treatment needs a few adjustments. The first two-dimensional problem is the Ringleb flow, and despite being smooth, it has a curved wall as the left boundary. Finally, the last problem is a two-dimensional conical flow, which presents an oblique shock and an inclined straight line wall being the cone surface. We show that the designed accuracy is being reached for smooth problems, that high-resolution is being attained for non-smooth problems, and that our modifications produce similar results while providing a more generic way to treat solid walls.

In this paper, high-order Runge-Kutta discontinuous Galerkin (RKDG) methods with multi-resolution weighted essentially non-oscillatory (WENO) limiters are designed for solving hyperbolic conservation laws on triangular meshes. These multi-resolution WENO limiters are new extensions of the associated multi-resolution WENO finite volume schemes [49] , [50] which serve as limiters for RKDG methods from structured meshes [47] to triangular meshes. Such new WENO limiters use information of the DG solution essentially only within the troubled cell itself which is identified by a new modified version of the original KXRCF indicator [24] , to build a sequence of hierarchical L 2 projection polynomials from zeroth degree to the highest degree of the RKDG method. The second-order, third-order, and fourth-order RKDG methods with associated multi-resolution WENO limiters are developed as examples, which could maintain the original order of accuracy in smooth regions and keep essentially non-oscillatory property near strong shocks or contact discontinuities by gradually degrading from the highest order to the first order. The linear weights inside the procedure of the new multi-resolution WENO limiters can be any positive numbers on the condition that their sum equals one. This is the first time that a series of polynomials of different degrees within the troubled cell itself are applied in a WENO fashion to modify the DG solutions in the troubled cell on triangular meshes. These new WENO limiters are very simple to construct, and can be easily implemented to arbitrary high-order accuracy and in higher dimensions on unstructured meshes. Such spatial reconstruction methodology improves the robustness in the simulation on the same compact spatial stencil of the original DG methods on triangular meshes. Extensive one-dimensional (run as two-dimensional problems on triangular meshes) and two-dimensional tests are performed to demonstrate the effectiveness of these RKDG methods with the new multi-resolution WENO limiters.

Essentially non-oscillatory (ENO) and weighted ENO (WENO) schemes were designed for solving hyperbolic and convection–diffusion equations with possibly discontinuous solutions or solutions with sharp gradient regions. The main idea of ENO and WENO schemes is actually an approximation procedure, aimed at achieving arbitrarily high-order accuracy in smooth regions and resolving shocks or other discontinuities sharply and in an essentially non-oscillatory fashion. Both finite volume and finite difference schemes have been designed using the ENO or WENO procedure, and these schemes are very popular in applications, most noticeably in computational fluid dynamics but also in other areas of computational physics and engineering. Since the main idea of the ENO and WENO schemes is an approximation procedure not directly related to partial differential equations (PDEs), ENO and WENO schemes also have non-PDE applications. In this paper we will survey the basic ideas behind ENO and WENO schemes, discuss their properties, and present examples of their applications to different types of PDEs as well as to non-PDE problems.

In this paper, we study the optimal error estimates of the classical discontinuous Galerkin method for time-dependent 2-D hyperbolic equations using Pk elements on uniform Cartesian meshes, and prove that the error in the L2 norm achieves optimal (k + 1)th order convergence when upwind fluxes are used. For the linear constant coefficient case, the results hold true for arbitrary piecewise polynomials of degree k ≥ 0. For variable coefficient and nonlinear cases, we give the proof for piecewise polynomials of degree k = 0, 1, 2, 3 and k = 2, 3, respectively, under the condition that the wind direction does not change. The theoretical results are verified by numerical examples.

In this paper we present a discontinuous Galerkin (DG) method to approximate stochastic conservation laws, which is an efficient high-order scheme. We study the stability for the semidiscrete DG me...

In this paper we consider the Runge--Kutta discontinuous Galerkin (RKDG) method to solve linear constant-coefficient hyperbolic equations, where the fourth-order explicit Runge--Kutta time-marching...

The meaning of weak solutions of a nonconservative hyperbolic system with discontinuous coefficients modeling traffic flows involving hysteresis is defined. An upwinding approximation scheme for th...

Local discontinuous Galerkin methods with generalized alternating numerical fluxes coupled with implicit–explicit time marching for solving convection–diffusion problems is analyzed in this paper, where the explicit part is treated by a strong-stability-preserving Runge–Kutta scheme, and the implicit part is treated by an L-stable diagonally implicit Runge–Kutta method. Based on the generalized alternating numerical flux, we establish the important relationship between the gradient and interface jump of the numerical solution with the independent numerical solution of the gradient, which plays a key role in obtaining the unconditional stability of the proposed schemes. Also by the aid of the generalized Gauss–Radau projection, optimal error estimates can be shown. Numerical experiments are given to verify the stability and accuracy of the proposed schemes with different numerical fluxes.

One- and multi-dimensional stochastic Maxwell equations with additive noise are considered in this paper. It is known that such system can be written in the multi-symplectic structure, and the stochastic energy increases linearly in time. High order discontinuous Galerkin methods are designed for the stochastic Maxwell equations with additive noise, and we show that the proposed methods satisfy the discrete form of the stochastic energy linear growth property and preserve the multi-symplectic structure on the discrete level. Optimal error estimate of the semi-discrete DG method is also analyzed. The fully discrete methods are obtained by coupling with symplectic temporal discretizations. One- and two-dimensional numerical results are provided to demonstrate the performance of the proposed methods, and optimal error estimates and linear growth of the discrete energy can be observed for all cases.