Search

Nanostructured hydroxyapatite (HAp) is the most favorable candidate biomaterial for bone tissue engineering because of its bioactive and osteoconductive properties. Herein, we report for the first time ultrasound-assisted facile and economic approach for the synthesis of nanocrystalline hydroxyapatite (Ca10(PO4)6(OH)2) using recycled eggshell biowaste referred as EHAp. The process involves the reaction of eggshell biowaste as a source of calcium and ammonium dihydrogen orthophosphate as a phosphate source. Ultrasound-mediated chemical synthesis of hydroxyapatite (HAp) is also carried out using similar approach wherein commercially available calcium hydroxide and ammonium dihydrogen orthophosphate were used as calcium and phosphate precursors, respectively and referred as CHAp for better comparison. The prepared materials were characterized by X-ray diffraction, field emission scanning electron microscopy, Fourier transform infrared spectroscopy, and Raman spectroscopy to determine crystal structure, particle morphology, and the presence of chemical functional groups. The nanocrystalline EHAp and CHAp were observed to have spherical morphology with uniform size distribution. Furthermore, mechanical properties such as Vickers hardness, fracture toughness, and compression tests have been studied of the EHAp and CHAp samples showing promising results. Mechanical properties show the influence of calcination at 600°C EHAp and CHAp material. After calcination, in the case of EHAp material an average hardness, mechanical strength, elastic modulus, and fracture toughness were found 552 MPa, 46.6 MPa, 2824 MPa, and 3.85 MPa m1/2, respectively, while in the case of CHAp 618 MPa, 47.5 MPa, 2071 MPa, and 3.13 MPa m1/2. In vitro cell studies revealed that the EHAp and CHAp nanoparticles significantly increased the attachment and proliferation of the hFOB cells. Here, we showed that EHAp and CHAp provide promising biocompatible materials that do not affect the cell viability and proliferation with enhancing the osteogenic activity of osteoblasts. Moreover, hFOB cells are found to express Osteocalcin, Osteopontin, Collagen I, Osteonectin, BMP-2 on the EHAp and CHAp bone graft. This study demonstrates the formation of pure nanocrystalline HAp with promising properties justifying the fact that the eggshell biowaste could be successfully used for the synthesis of HAp with good mechanical and osteogenic properties. These findings may have significant implications for designing of biomaterial for use in orthopedic tissue regeneration. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2017.

We report the sensing behavior of liquid–liquid extraction of nickel(II), which has been selectively determined from contaminated water samples by a simple UV-visible spectrophotometer. The method is based on synergistic extraction of nickel(II) by 1-(2ˊ,4ˊ-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2ˊ,4ˊ-dinitro APTPT] with pyridine. Nickel(II) reacts with 2ˊ,4ˊ-dinitro APTPT and forms a green-colored complex at pH 9.2. In addition, the Ni(II) ions were detected with the naked eye with the ligand. The absorbance of the coloured complex was measured at 660 nm and the colored complex is stable for more than 48 h even in the presence of other competing ions. The system obeyed Beer’s law in the concentration range of 5–50 μg mL−1 of nickel(II) and the optimum range evaluated by Ringbom’s plot method is 10–40 μg mL−1 with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell’s sensitivity of the extractive species were found to be 1.64 × 103 dm3 mol−1 cm−1 and 0.0585 μg cm−2 in the presence of pyridine, and 7.4 × 102 dm3 mol−1 cm−1 and 0.78 μg cm−2 in the absence of pyridine, respectively. The composition of nickel(II)-2ˊ,4ˊ-dinitro APTPT-pyridine was established by the slope ratio method, the mole ratio method and Job’s method of continuous variation. It was found that the metal:ligand:synergent (M:L:Sy) ratio is 1:2:2. To assess the precision and accuracy of the developed method, determinations were carried out at n = 5. The relative standard deviation of all measurements does not exceed 0.16%. Excellent selectivity was found towards the Ni(II) ion due to a specific complex formation between the Ni(II) ion and the organic ligand. In the extraction of Ni(II), several affecting factors, including the solution pH, ligand concentration, equilibrium time, initial Ni(II) ion concentration and foreign ions, were investigated and the applicability of the method was checked by the analysis of synthetic mixtures and alloys. The developed method was successfully used for the determination of nickel(II) from waste water effluents from the foundry region and the nickel plating industry (Kolhapur city). The results obtained by the developed method were also confirmed by AAS. We claimed from this study that Ni(II) could be successfully determined by the spectrophotometric method developed in the current work. The present work is obviously much simpler than the conventional method comprising multistep processes.