Search

In this article we investigate a mathematical model for a retinal prosthesis made of organic polymer nanoparticles (NP) in the stationary regime. The model consists of a Drift-Diffusion system to describe free charge transport in the NP bulk; a Poisson-Nernst-Planck system to describe ion electrodiffusion in the solution surrounding the NP; and nonlinear transmission conditions at the NP-solution interface. To solve the model we use an iteration procedure for which we prove the existence and briefly comment the uniqueness of a fixed point under suitable smallness assumptions on model parameters. For system discretization we use a stabilized finite element method to prevent unphysical oscillations in the electric potential, carrier number densities and ion molar densities. Model predictions describe the amount of active chemical molecule accumulating at the neuron surface and highlight electrostatic effects induced by the sole presence of the nanoparticle. These results support the use of mathematical modeling as a virtual laboratory for the optimal design of bio-hybrid systems, whose investigation may be impervious due to experimental limits.

Non-genetic photostimulation, which allows for control over cellular activity via the use of cell-targeting phototransducers, is widely used nowadays to study and modulate/restore biological functions. This approach relies on non-covalent interactions between the phototransducer and the cell membrane, thus implying that cell conditions and membrane status can dictate the effectiveness of the method. For instance, although immortalized cell lines are traditionally used in photostimulation experiments, it has been demonstrated that the number of passages they undergo is correlated to the worsening of cell conditions. In principle, this could impact cell responsivity against exogenous stressors, including photostimulation. However, these aspects have usually been neglected in previous experiments. In this work, we investigated whether cell passages could affect membrane properties (such as polarity and fluidity). We applied optical spectroscopy and electrophysiological measurements in two different biological models: (i) an epithelial immortalized cell line (HEK-293T cells) and (ii) liposomes. Different numbers of cell passages were compared to a different morphology in the liposome membrane. We demonstrated that cell membranes show a significant decrease in ordered domains upon increasing the passage number. Furthermore, we observed that cell responsivity against external stressors is markedly different between aged and non-aged cells. Firstly, we noted that the thermal-disordering effect that is usually observed in membranes is more evident in aged cells than in non-aged ones. We then set up a photostimulation experiment by using a membrane-targeted azobenzene as a phototransducer (Ziapin2). As an example of a functional consequence of such a condition, we showed that the rate of isomerization of an intramembrane molecular transducer is significantly impaired in aged cells. The reduction in the photoisomerization rate translates in cells with a sustained reduction of the Ziapin2-related hyperpolarization of the membrane potential and an overall increase in the molecule fluorescence. Overall, our results suggest that membrane stimulation strongly depends on membrane order, highlighting the importance of cell passage during the characterization of the stimulation tools. This study can shine light on the correlation between aging and the development of diseases driven by membrane degradation as well as on the different cell responsivities against external stressors, such as temperature and photostimulation.

Doped organic semiconductors play a central role in the development of several innovative optoelectronic and energy harvesting applications. Currently, the realization of thermoelectric generators, which require both hole- and electron-transporting materials with high electrical conductivity, is strongly hindered by the scarce availability of stable solution-processable n-dopants and their limited efficiency. Herein, the synthesis of 4-(1,3-dimethyl-2,3-dihydro-1H-benzimidazol-2-yl)-dibenzazepine (IStBI), a novel derivative belonging to the well-known family of the benzimidazoline compounds, is presented. The functionalization with the planarized and rigid iminostilbene substituent allows, without significantly affecting the compound electronic structure, an efficient intercalation of the dopant molecules inside the ordered regions of thin films of the benchmark n-type polymer poly(N,N′-bis-2-octyldodecylnaphthalene-1,4,5,8-bis-dicarboximide-2,6-diyl-alt-5,5′-2,2′-bithiophene) P(NDI2OD-T2). Consequently, a maximum electrical conductivity of (1.14 ± 0.13) × 10−2 S cm−1 is recorded, exceeding by one order of magnitude what previously achieved upon solution doping of the reference P(NDI2OD-T2) with benzimidazoline derivatives. The thermoelectric power factor is also simultaneously increased. The findings confirm that tailoring of the dopant chemical structure to improve structural interactions with the host semiconductors can be employed as a successful strategy to achieve more effective n-doping, helping to close the performance gap with p-type materials.

The viscosity of cell membranes is a crucial parameter that affects the diffusion of small molecules both across and within the lipidic membrane and that is related to several diseases. Therefore, the possibility to measure quantitatively membrane viscosity on the nanoscale is of great interest. Here, we report a complete investigation of the photophysics of an amphiphilic membrane-targeted azobenzene (ZIAPIN2) and we validate its use as viscosity probe for cell membranes. We exploit ZIAPIN2 the trans-cis photoisomerization to develop a molecular viscometer and to assess the viscosity of Escherichia coli bacteria membranes employing time-resolved fluorescence spectroscopy. Lifetime measurements of ZIAPIN2 in E. coli bacteria suspensions correctly indicate that membrane viscosity decreases as the samples were heated up. Our results report a membrane viscosity value in live E. coli cells going from 10 to 5 cP, increasing the temperature from 22 {\deg}C up to 40 {\deg}C.

Recent studies have shown that bacterial membrane potential is dynamic and plays signalling roles. Yet, little is still known about the mechanisms of bacterial membrane potential regulation –owing in part to a scarcity of appropriate research tools. Optical modulation of bacterial membrane potential could fill this gap and provide a new approach to studying and controlling bacterial physiology and electrical signalling. Here, we show that a membrane-targeted azobenzene (Ziapin2) can be used to photo-modulate the membrane potential in cells of the Gram-positive bacterium Bacillus subtilis. We found that upon exposure to blue-green light (λ = 470 nm), isomerization of Ziapin2 in the bacteria membrane induces hyperpolarisation of the potential. In order to investigate the origin of this phenomenon we examined ion-channel-deletion strains and ion channel blockers. We found that in presence of the chloride channel blocker idanyloxyacetic acid-94 (IAA-94) or in absence of KtrAB potassium transporter, the hyperpolarisation response is attenuated. These results reveal that the Ziapin2 isomerization can induce ion channel opening in the bacterial membrane, and suggest that Ziapin2 can be used for studying and controlling bacterial electrical signalling. This new optical tool can contribute to better understand microbial phenomena, such as biofilm electric signalling and antimicrobial resistance.

Non-genetic photostimulation is a novel and rapidly growing multidisciplinary field that aims to induce light-sensitivity in living systems by exploiting exogeneous phototransducers. Here, we propose an intramembrane photoswitch, based on an azobenzene derivative (Ziapin2), for optical pacing of human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). The light-mediated stimulation process has been studied by applying several techniques to detect the effect on the cell properties. In particular, we recorded changes in membrane capacitance, in membrane potential (Vm), and modulation of intracellular Ca2+ dynamics. Finally, cell contractility was analyzed using a custom MATLAB algorithm. Photostimulation of intramembrane Ziapin2 causes a transient Vm hyperpolarization followed by a delayed depolarization and action potential firing. The observed initial electrical modulation nicely correlates with changes in Ca2+ dynamics and contraction rate. This work represents the proof of principle that Ziapin2 can modulate electrical activity and contractility in hiPSC-CMs, opening up a future development in cardiac physiology.

2D metal monochalcogenides have recently attracted interest for photoelectrochemical (PEC) applications in aqueous electrolytes. Their optical bandgap in the visible and near-infrared spectral region is adequate for energy conversion and photodetection/sensing. Their large surface-to-volume ratio guarantees that the charge carriers are photogenerated at the material/electrolyte interface, where redox reactions occur, minimizing recombination processes. However, solution-processed photoelectrodes based on these materials exhibit energy conversion efficiencies that are far from the current state of the art expressed by established technologies. This work reports a systematic morphological, spectroscopic, and PEC characterization of solution-processed films of photoactive InSe flakes for PEC-type photodetectors. By optimizing the thickness and hybridizing InSe flakes with electrically conductive Sn:In2O3(ITO) nanocrystals, photoanodes with a significant photoanodic response in both acidic and alkaline media are designed, reaching responsivity up to 60.0 mA W−1(external quantum efficiency = 16.4%) at +0.4 V versus RHE under visible illumination. In addition, a strategy based on the use of sacrificial agents (i.e., 2-propanol and Na2SO3) is proposed to improve the stability of the InSe and ITO/InSe photodetectors. Our data confirm the potential of 2D InSe for PEC energy conversion and sensing applications, remarking the challenges related to InSe stability during anodic operation.

Non-genetic photostimulation is a novel and rapidly growing multidisciplinary field of research that aims to induce light sensitivity in living systems by exploiting exogeneous phototransducers.Here we propose a recently synthetized intramembrane photoswitch, based on an azobenzene derivative (Ziapin2), for optical pacing of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs).The light-mediated stimulation process has been studied by applying several characterization techniques to detect the effect on the cell properties. In particular, we recorded changes in membrane capacitance, in membrane potential (Vm), and modulation of intracellular Ca2+dynamics. Finally, cell contractility was analyzed using a custom MATLAB algorithm.Photostimulation of intramembrane Ziapin2 causes a transient Vmhyperpolarization followed by a delayed depolarization and action potential firing. The observed initial electrical modulation nicely correlates with changes in Ca2+dynamics and contraction rate.This work represents the proof of principle that Ziapin2 can modulate electrical activity and contractility in hiPSC-CMs, opening up a future development in cardiac physiology.

Retinal degeneration is one of the prevalent causes of blindness worldwide, for which no effective treatment has yet been identified. Inorganic photovoltaic devices have been investigated for visual restoration in advanced stage Retinitis pigmentosa (RP), although lack of implant flexibility and foreign-object reactions have limited their application. Organic photoactive retinal prostheses may overcome these limitations, being biomimetic and tissue friendly. Inspired by organic photovoltaic strategies involving graphene, a hybrid retinal prosthesis was recently engineered consisting of a dual poly-3-hexylthiophene (P3HT) and graphene layer onto a flexible substrate. Here, this hybrid prosthesis was subretinally implanted in vivo in 5-month-old Royal College of Surgeons (RCS) rats, a rodent model of RP. Implanted dystrophic rats restored visual performances at both subcortical and cortical levels in response to light stimuli, in the absence of marked inflammatory responses. Moreover, the analysis of the physical-mechanical properties after prolonged permanence in the eye showed excellent biocompatibility and robustness of the device. Overall, the results demonstrate that graphene-enhanced organic photovoltaic devices can be suitably employed for the rescue of retinal dystrophies and supports the translation of the organic strategy into the medical practice.TABLE OF CONTENTSInspired by organic photovoltaic, a hybrid retinal prosthesis consisting of poly-3-hexylthiophene (P3HT) and graphene on a flexible substrate was subretinally implanted in vivo in Royal College of Surgeons (RCS) rats, a model of Retinitis pigmentosa. Implanted dystrophic rats restored visual performances at both subcortical and cortical levels in response to light stimuli, in the absence of marked inflammatory responses.

Although the efficiency of organic polymer-based retinal devices has been proved, the interpretation of the working mechanisms that grant photostimulation at the polymer/neuron interface is still a matter of debate. To contribute solving this issue, we focus here on the characterization of the interface between poly(3-hexyltiophene) films and water by the combined use of electrochemistry and mathematical modeling. Simulations well reproduce the buildup of photovoltage (zero current condition) upon illumination of the working electrode made by a polymer film deposited onto an indium tin oxide (ITO) substrate. Due to the essential unipolar transport in the photoexcited film, diffusion leads to a space charge separation that is responsible for the initial photovoltage. Later, electron transfer reactions toward oxygen in the electrolyte extract negative charge from the polymer. In spite of the simple model studied, all of these considerations shed light on the possible coupling mechanisms between the polymeric device and the living cell, supporting the hypothesis of pseudocapacitive coupling.

The observation of neuron-like behavior in bacteria, such as the occurrence of electric spiking and extended bioelectric signaling, points to the role of membrane dynamics in prokaryotes. Electrophysiology of bacteria, however, has been overlooked for long time, due to the difficulties in monitoring bacterial bioelectric phenomena with those probing techniques that are commonly used for eukaryotes. Optical technologies can allow a paradigm shift in the field of electrophysiology of bacteria, as they would permit to elicit and monitor signaling rapidly, remotely, and with high spatiotemporal precision. In this perspective, we discuss about the potentiality of light interrogation methods in microbiology, encouraging the development of all-optical electrophysiology of bacteria.

Organic semiconductors have shown great potential as efficient bioelectronic materials. Specifically, photovoltaic polymers such as the workhorse poly(thiophene) derivatives, when stimulated with visible light, can depolarize neurons and generate action potentials, an effect that has been also employed for rescuing vision in blind rats. In this context, however, the coupling of such materials with optically resonant structures to enhance those photodriven biological effects is still in its infancy. Here, we employ the optical coupling between a nanostructured metasurface and poly(3-hexylthiophene) (P3HT) to improve the bioelectronic effects occurring upon photostimulation at the abiotic-biotic interface. In particular, we designed a spectrally tuned aluminum metasurface that can resonate with P3HT, hence augmenting the effective field experienced by the polymer. In turn, this leads to an 8-fold increase in invoked inward current in cells. This enhanced activation strategy could be useful to increase the effectiveness of P3HT-based prosthetic implants for degenerative retinal disorders. Ministry of Education (MOE) Published version This work was supported by the Singapore Ministry of Education Academic Research Fund Tier 1 (2018-T1-002- 040).

The noncovalent intercalation of amphiphilic molecules in the lipid membrane can be exploited to modulate efficiently the physical status of the membrane. Such effects are largely employed in a range of applications, spanning from drug-delivery to therapeutics. In this context, we have very recently developed an intramembrane photo-actuator consisting of an amphiphilic azobenzene molecule, namely ZIAPIN2. The selective photo-isomerization occurring in the lipid bilayer induces a photo-triggered change in the membrane thickness and capacitance, eventually permitting to evoke light-induced neuronal firing both in vitro and in vivo. Here, we present a study on the dynamical perturbation in the lipid membrane caused by ZIAPIN2 and its vehicle solvent, dimethyl sulfoxide. Effects on the dynamics occurring in the picosecond time range and at the molecular level are probed using quasi-elastic neutron scattering. By coupling experiments carried out both on model membranes and intact cells, we found that DMSO leads to a general retardation of the dynamics within a more dynamically ordered landscape, a result that we attribute to the dehydration at the interface. On the other hand, ZIAPIN2 partitioning produces a general softening of the bilayer owing to its interaction with the lipids. These data are in agreement with our recent studies, which indicate that the efficacy of ZIAPIN2 in triggering cellular signalling stems from its ability to mechanically perturb the bilayer as a whole, by forming light-sensitive membrane spanning dimers.

Graphene conductive properties have been long exploited in the field of organic photovoltaics and optoelectronics by the scientific community worldwide. We engineered and characterized a hybrid biointerface in which graphene is coupled with photosensitive polymers, and tested its ability to elicit lighttriggered neural activity modulation in primary neurons and blind retina explants. We designed such a graphene-based device by modifying a photoactive P3HT-based retinal interface, previously reported to rescue light sensitivity in blind rodents, with a CVD graphene layer replacing the conductive PEDOT:PSS layer to enhance charge separation. The new graphene-based device was characterized for its electrochemical features and for the ability to photostimulate primary neurons and blind retina explants, while preserving biocompatibility. Light-triggered responses, recorded by patch-clamp in vitro or MEA ex vivo, show a stronger light-transduction efficiency when the neurons are interfaced with the graphene-based device with respect to the PEDOT:PSS-based one. The possibility to ameliorate flexible photo-stimulating devices via the insertion of graphene, paves the way for potential biomedical applications of graphenebased neuronal interfaces in the context of retinal implants., Comment: 10 pages, 5 figures

This review describes hybrid photonic-plasmonic structures based on periodic structures that have metallic coatings or inserts which make use of the Tamm plasmon for sensing applications. The term Tamm plasmon refers a particular resonance resulting from the enhancement of a surface plasmon resonance absorption via coupling to a wavelength-matching photonic bandgap provided by a photonic crystal. Tamm plasmon-based devices come in an ample variety of material and geometric combinations, each designed to perform a specific kind of measurement. While the physical effect is quite well documented and understood, its implementation in devices is still a rapidly developing and thriving field, which leaves open many possibilities for novel designs and new applications. We therefore aim of giving a complete overview on the topic, so as to provide an ordered collection of designs and uses, as well as to spur further development on the subject of the Tamm plasmon for sensing applications.

The use of organic semiconductor nanoparticles (NPs) as retinal prostheses is attracting attention due to the possibility of injecting them directly into the desired tissue, with a minimally invasive surgical treatment. Polythiophene NPs localize in close proximity to the bipolar cell plasma membrane, which engulfs them, creating an intimate contact between the NP and the neuron. The intimate contact coupled with NP photoactivity are hypothesized to be the main guarantors of the electrostatic functioning of the bio-hybrid device. Since they may both be strongly affected by the geometric features of the NP, in this work, we use mathematical modeling to study the electrostatic polarization induced by light onto the NP and analyze how its spatial distribution is modified by varying the radius of the NP and its shape. Simulation results support the efficacy of the theoretical approach as a complementary virtual laboratory in the optimization of the current device and in the development of similar future NP-based technologies.

Organic devices are attracting considerable attention as prostheses for the recovery of retinal light sensitivity lost to retinal degenerative disease. The biotic/abiotic interface created when light-sensitive polymers and living tissues are placed in contact allows excitation of a response in blind laboratory rats exposed to visual stimuli. Although polymer retinal prostheses have proved to be efficient, their working mechanism is far from being fully understood. In this review article, we discuss the results of the studies conducted on these kinds of polymer devices and compare them with the data found in the literature for inorganic retinal prostheses, where the working mechanisms are better comprehended. This comparison, which tries to set some reference values and figures of merit, is intended for use as a starting point to determine the direction for further investigation.

We introduce laser-assisted Time-Resolved SEM (TR-SEM), joining Scanning Electron Microscopy and laser light excitation, to probe the long-term temporal evolution of optically excited charge distributions at the surface of Metal Ammonium Lead Triiodide (MAPbI3) hybrid perovskite thin films. Laser-assisted TR-SEM relies on the optically induced local modification of Secondary Electron (SE) detection yield to provide mapping of photoexcited potentials and charge dynamics at surfaces, and qualifies as a complementary approach to near-field probe microscopies and nonlinear photoemission spectroscopies for photovoltage measurements. Real-time imaging of evolving field patterns are provided on timescales compatible with SEM scanning rates, so that temporal resolution in the millisecond range can be ultimately envisaged. MAPbI3 is an outstanding light-sensitive material candidate for applications in solar light harvesting and photovoltaics, also appealing as an active system for light generation. In this work, the real time temporal evolution of optically induced SE contrast patterns in MAPbI3 is experimentally recorded, both under illumination by a 405 nm blue laser and after light removal, showing the occurrence of modifications related to photoinduced positive charge fields at surface. The long term evolution of these surface fields are tentatively attributed to ion migration within the film, under the action of the illumination gradient and the hole collecting substrate. This optical excitation is fully reversible in MAPbI3 over timescales of hours and a complete recovery of the system occurs within days. Permanent irradiation damage of the material is avoided by operating the SEM at 5 keV of energy and 1–10 pA of primary current. Optical excitation is provided by intense above-bandgap illumination (up to 50 W/cm2). TR-SEM patterns show a strong dependence on the geometry of SE collection. Measurements are taken at different axial orientations of the sample with respect to the entrance of the in-column detection system of the SEM and compared with numerical modeling of the SE detection process. This enables to single out the information regarding the local potential distribution. Results are interpreted by combining data about the spectral distribution of emitted SEs with the configuration of the electric and magnetic fields in the specimen chamber. The present modeling sets a robust basis for the understanding of photoinduced SE electron contrast.

4-(2,3-dihydro-1,3-dimethyl-1H-benzimidazol-2-yl)-N,N-dimethylbenzenamine (DMBI-H) is a very successful dopant for n-type organic semiconductors. It is efficient over a large range of polymers and small molecule derivatives, commercially available, soluble in established processing solvents and generally considered to be air stable. Yet, on a closer look not all that glisters is gold. We show that DMBI-H does indeed decompose in the processing solvent, but the process does not negatively impact performances. Its main decomposition product acts as a nucleating agent for DMBI-H with the overall effect of boosting conductivity of the final doped P(NDI2OD-T2) films. Such results, confirmed by control experiments performed with a different nucleating agent, shine a light on the crucial role played by solid-state microstructure in DMBI-H doped semiconductors and hints a viable way to its optimization

Recently, tunable photonic crystals (PhCs) have received great research interest, thanks to the wide range of applications in which they can be employed, such as light emission and sensing, among others. In addition, the versatility and ease of fabrication of PhCs allow for the integration of a large range of responsive elements that, in turn, can permit active tuning of PhC optical properties upon application of external stimuli, e.g., physical, chemical or even biological triggers. In this work, we summarize the most employed theoretical tools used for the design of optical properties of responsive PhCs and the most used fabrication techniques. Furthermore, we collect the most relevant results related to this field, with particular emphasis on electrochromic devices.

We present a series of cationic membrane-targeted azobenzene molecules, with the aim to understand how variations in molecular architecture influence the relative optical and biological properties. 1,4-Amino-substituted azobenzene was chosen as the switching unit while the number of linked alkyl chains and their cationic end-group were systematically varied. Their photophysics, membrane partitioning, and electrophysiological efficacy were studied. We found that the polar end group is a key-factor determining the interaction with the phospholipid heads in the plasma membrane bilayer and consequently the ability to dimerize. The monosubstituted photoswitch with a pyridinium-terminated alkyl chain was found to be the best candidate for photostimulation. This study provides a structure-property investigation that can guide the chemical engineering of a new generation of molecular photo-actuators.

Diatom microalgae have great industrial potential as next-generation sources of biomaterials and biofuels. Effective scale-up of their production can be pursued by enhancing the efficiency of their photosynthetic process in a way that increases the solar-to-biomass conversion yield. A proof-of-concept demonstration is given of the possibility of enhancing the light absorption of algae and of increasing their efficiency in photosynthesis by in vivo incorporation of an organic dye which acts as an antenna and enhances cells’ growth and biomass production without resorting to genetic modification. A molecular dye (Cy5) is incorporated in Thalassiosira weissflogii diatom cells by simply adding it to the culture medium and thus filling the orange gap that limits their absorption of sunlight. Cy5 enhances diatoms’ photosynthetic oxygen production and cell density by 49% and 40%, respectively. Cy5 incorporation also increases by 12% the algal lipid free fatty acid (FFA) production versus the pristine cell culture, thus representing a suitable way to enhance biofuel generation from algal species. Time-resolved spectroscopy reveals Förster Resonance Energy Transfer (FRET) from Cy5 to algal chlorophyll. The present approach lays the basis for non-genetic tailoring of diatoms’ spectral response to light harvesting, opening up new ways for their industrial valorization.

The search of compounds emitting in the near-infrared (NIR) has been accelerated owing to their use in biomedical and telecommunications applications. In this regard, nanographenes (NGs) are attractive materials adequate for integration with other technologies, which have recently demonstrated amplified spontaneous emission (ASE) and lasing across the visible spectrum. Here, the optical and ASE properties of four-zigzag edged NGs of the [m,n]peri-acenoacene family are reported, whose size is increased through conjugation extension by varying n (from 3 to 5) while keeping m = 2. Results show that such 1D conjugation extension method is more efficient in terms of shifting the photoluminescence (PL) to the infrared (PL at 710 nm in the larger compound, PP-Ar) than through 2D conjugation extension as in previously reported NGs (PL at 676 nm with the largest compound FZ3, with n = 3 and m = 4). Additionally, PP-Ar shows dual-ASE (at 726 and 787 nm), whose origin is elucidated through Raman and transient absorption spectroscopies. These compounds’ potential for red and NIR lasing is demonstrated through the fabrication of distributed feedback lasers with top-layer resonators. This study paves the way towards the development of stable low-cost all-plastic NIR lasers. The authors acknowledge financial support from the “Ministerio de Ciencia, Innovación y Universidades” of Spain, European Regional Development Fund and European Social Funds (MAT2015-66586-R, PDI2019-106114GB-I00, BES-2016-077681, PGC2018-098533-B-100 and RED2018-102815-T). J.C. thanks the Junta de Andalucía of Spain (UMA18FEDERJA057). The authors also thank the Research Central Services (SCAI) of the University of Málaga. F.G. acknowledges the Spanish Government for an FPI grant. G.M.P. thanks Fondazione Cariplo (grant no 2018-0979) for the financial support. J.W. acknowledges the “Agency for Science, Technology and Research of Singapore” for financial support from A*STAR AME grant (A20E5c0089). A.M.R. and F.S. have received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. [816313]).

Photothermal perturbation of the cell membrane is typically achieved using transducers that convert light into thermal energy, eventually heating the cell membrane. In turn, this leads to the modulation of the membrane electrical capacitance that is assigned to a geometrical modification of the membrane structure. However, the nature of such a change is not understood. In this work, we employ an all-optical spectroscopic approach, based on the use of fluorescent probes, to monitor the membrane polarity, viscosity, and order directly in living cells under thermal excitation transduced by a photoexcited polymer film. We report two major results. First, we show that rising temperature does not just change the geometry of the membrane but indeed it affects the membrane dielectric characteristics by water penetration. Second, we find an additional effect, which is peculiar for the photoexcited semiconducting polymer film, that contributes to the system perturbation and that we tentatively assigned to the photoinduced polarization of the polymer interface.

The spectral overlap between stimulated emission (SE) and absorption from dark states (i.e. charges and triplets) especially in the near-infrared (NIR), represents one of the most effective gain loss channel in organic semiconductors. Recently, bottom-up synthesis of atomically precise graphene nanostructures, or nanographenes (NGs), has opened a new route for the development of environmentally and chemically stable materials with optical gain properties. However, also in this case, the interplay between gain and absorption losses has hindered the attainment of efficient lasing action in the NIR. Here, we demonstrate that the introduction of two fluoranthene imide groups to the NG core leads to a more red-shifted emission than the precursor NG molecule (685 vs. 615 nm) and also with a larger Stokes (45 nm vs. 2 nm, 1026 cm-1 vs. 53 cm-1, respectively). Photophysical results indicate that, besides the minimisation of ground state absorption losses, such substitution permits to suppress the detrimental excited state absorption in the NIR, which likely arises from a dark state with charge-transfer character. This has enabled NIR lasing (720 nm) from all-solution processed distributed feedback devices with one order of magnitude lower thresholds than those of previously reported NIR-emitting NGs. This study represents an advance in the field of NGs and, in general, organic semiconductors photonics, towards the development of cheap and stable NIR lasers. G.M.P. thanks Fondazione Cariplo for financial support (grant n° 2018-0979). R.M.M., P.G.B., J.M.V., J.A.Q. and M.A.D.G. acknowledge funding from the Spanish Ministry of Economy and Competitiveness (MINECO), the European Regional Development Fund (FEDER) and European Social Funds (ESF; grant n° MAT2015-66586-R and FPI fellowship BES-2016-077681). Q.C., K.M. and A.N. are grateful for the financial support by the Max Planck Society and the ANR-DFG NLE Grant GRANAO by DFG 431450789. K.M. acknowledges a fellowship from Gutenberg Research College, Johannes Gutenberg University Mainz. R.K. and A.N. appreciate the support by the Okinawa Institute of Science and Technology Graduate University. Y.I. and A.N acknowledge financial support from the Japan Society of Promotion Science Program for Advancing Strategic International Networks to Accelerate the Circulation of Talented Researchers.

Cell membrane perturbation is a common way to stimulate cells by using external actuators. Recently, nanotechnology has added a number of new strategies for doing this, enlarging the scope and the range of mechanisms involved. Here, we describe a number of possible perturbation actions that are driven by light, and we try to capture the underlying phenomena. The discussion is based on the simple equivalent circuit model for the cell membrane.

In this work, the feasibility of sterilizing a water suspension of poly-3-hexylthiophene nanoparticles (P3HT-NPs) is investigated using ionizing radiation, either gamma-rays or high-energy electrons (e-beam). It is found that regardless of the irradiation source, the size, polydispersity, aggregation stability, and morphology of the NPs are not affected by the treatment. Furthermore, the impact of ionizing radiation on the physicochemical properties of NPs at different absorbed radiation doses (10-25 kGy) and dose rates (kGy time(-1)) is evaluated through different spectroscopic techniques. The results indicate that delivering a high dose of radiations (25 kGy) at a high dose rate, that is, kGy s(-1), as achieved by e-beam irradiation, preserves the characteristics of the polymeric NPs. Differently, the same radiation dose but delivered at a lower dose rate, that is, kGy h(-1), as attained by using a gamma-source, can modify the physicochemical properties of the polymer. Sterility tests indicate that an absorbed dose of 10 kGy, delivered either with gamma-rays or e-beam, is already sufficient for effective sterilization of the colloidal suspension and for reducing the endotoxin content. Finally, NPs irradiated at different doses, exhibit the same cytocompatibility and cell internalization characteristics in human neuroblastoma SH-SY5Y cells of NPs prepared under aseptic conditions.

Substrate engineering for steering cell growth is a wide and well-established area of research in the field of modern biotechnology. Here we introduce a micromachining technique to pattern an inert, transparent polymer matrix blended with a photoactive polymer. We demonstrate that the obtained scaffold combines the capability to align with that to photostimulate living cells. This technology can open up new and promising applications, especially where cell alignment is required to trigger specific biological functions, e.g. generate powerful and efficient muscle contractions following an external stimulus., Comment: 30 pages, 7 images in main text, 5 images in supporting

Photonic crystals can be employed effectively as simple and low-cost colorimetric sensors for monitoring variation in the environmental refractive index. In most cases, the photonic colorimetric approach relies on the use of porous and permeable materials to highlight refractive index (RI) modulation, although a fine control over the size distribution and free volume can be complex to achieve. Here, we propose nonporous low-layer count distributed Bragg reflectors (DBRs) as simple optical devices for colorimetric refractive index sensing. In our feasibility study, we simulated the reflectance of DBRs consisting of two to five SiO2/TiO2 bilayers upon variation of the external refractive index. We found that the 2-bilayers sample exhibits the highest sensitivity to RI variations, and identified the ratio between the first and third order reflectance intensity as simple yet efficient ratiometric parameter to discern analytes with different refractive indices. This approach can provide a promising perspective for the development of cheap and portable devices for environmental detection of a wide range of substances.

Organic materials have attracted great interest for thermoelectric applications due to their tuneable electronic properties, solution processability and earth-abundance, potentially enabling high-throughput realization of low-cost devices for low-power energy harvesting applications. So far, organic thermoelectricity has primarily focused on materials development, with less attention given to integrated generators. Yet, future applications will require the combination of efficient generators architectures and scalable manufacturing techniques to leverage the advantages of such promising materials. Here we report the realization of a monolithic organic micro-thermoelectric generator (μ-OTEG), using only direct writing methods, embedding the thermoelectric legs within a plastic substrate through a combination of direct laser writing and inkjet printing techniques. Employing PEDOT:PSS for the p-type legs and a doped fullerene derivative for the n-type ones, we demonstrate a μ-OTEG with power density of 30.5 nW/cm2 under small thermal gradients, proving the concrete possibility of achieving power requirements of low-power, distributed sensing applications.

We report on the mutual interaction between poly(3-hexylthiophene) nanoparticles (P3HT-NPs) and human embryonic kidney (HEK-293) cells. P3HT-NPs, prepared in sterile conditions and efficiently uptaken within the live cells cytosol, show well-ordered morphology, high colloidal stability and excellent biocompatibility. Electrophysiology and calcium imaging experiments demonstrate that physiological functions of live cells are fully preserved in the presence of P3HT-NPs. From a complementary point of view, the photophysical properties of P3HT-NPs are also mainly maintained within the cellular environment, as proven by in situ time-resolved photoluminescence. Interestingly, we detect slight modifications in emission spectra and dynamics, which we ascribe to the contribution from the P3HT-NPs surface, possibly due to conformational changes as the result of the interaction with intracellular proteins or the formation of NPs aggregates. This work demonstrates that P3HT-NPs are excellent candidates for use as light sensitive actuators, due to their remarkable physical properties, optimal biocompatibility and capability of interaction with living cells.

Hybrid plasmonic photonic structures combine the plasmonic response with the photonic band gap, holding promise for utilization as optical switches and sensors. Here, we demonstrate the active modulation of the optical response in such structures with two different external stimuli, e.g. laser pulses and bacteria. First, we report the fabrication of a miniaturized (5 x 5 mm) indium tin oxide (ITO) grating employing femtosecond laser micromachining, and we show the possibility to modulate the photonic band gap in the visible via ultrafast photoexcitation in the infrared part of the spectrum. Note that the demonstrated time response in the picosecond range of the spectral modulation have an industrial relevance. Moreover, we manufacture one-dimensional photonic crystals consisting of a solution-processed dielectric Bragg stack exposing a top-layer of bio-active silver. We assign the bacterial responsivity of the system to polarization charges at the Ag/bacterium interface, giving rise to an overall blue shift of the photonic band gap., 7 pages, 4 figures

G.M.P. and E.C. contributed equally to this work. G.M.P. acknowledges the financial support from Fondazione Cariplo, grant no. 2018-0979. The authors thank the financial support from the EU Horizon 2020 Research and Innovation Programme under Grant Agreement No. 643238 (SYNCHRONICS). The authors also thank Dr. Daniele Viola for helping with the analysis of the TA data., The non‐covalent affinity of photoresponsive molecules to biotargets represents an attractive tool for achieving effective cell photo‐stimulation. Here, an amphiphilic azobenzene that preferentially dwells within the plasma membrane is studied. In particular, its isomerization dynamics in different media is investigated. It is found that in molecular aggregates formed in water, the isomerization reaction is hindered, while radiative deactivation is favored. However, once protected by a lipid shell, the photochromic molecule reacquires its ultrafast photoisomerization capacity. This behavior is explained considering collective excited states that may form in aggregates, locking the conformational dynamics and redistributing the oscillator strength. By applying the pump probe technique in different media, an isomerization time in the order of 10 ps is identified and the deactivation in the aggregate in water is also characterized. Finally, it is demonstrated that the reversible modulation of membrane potential of HEK293 cells via illumination with visible light can be indeed related to the recovered trans→cis photoreaction in lipid membrane. These data fully account for the recently reported experiments in neurons, showing that the amphiphilic azobenzenes, once partitioned in the cell membrane, are effective light actuators for the modification of the electrical state of the membrane., Fondazione Cariplo. Grant Number: 2018‐0979, EU Horizon 2020 Research and Innovation Programme. Grant Number: 643238

To leverage the outstanding photonic qualities of lead halide hybrid perovskites under high optical irradiance, their reliability and temporal stability must be assessed. Time-resolved scanning electron microscopy unveils that when illuminating the free surface of methylammonium lead iodide (MAPbI3) films at 500 Sun in vacuum, a giant photopotential locally develops in tens of seconds, differently evolving depending on charge-selective substrates. It is reversible on timescales of minutes in the case of hole-transporting poly(3,4-ethylenedi- oxythiophene) polystyrene sulfonate, while more persistent effects occurs, on the timescale of hours, in the case of electron-transporting TiO2. In addition, films grown on TiO2 show irreversible decay of photoluminescence measured in situ and photoinduced alteration of the work function at some grain bounda- ries. Different responses at high irradiance are ascribable to contact-dependent and light-induced spatial redistribution of charged defects, either ions or local- ized dipoles. It is also clear that photoexcited charges play different roles in the photochemistry of systems, depending on selective contacts and they are likely to mediate diverse photoassisted redox reaction paths. The TiO2 layer may act as a photocatalyst, leading to MAPbI3 degradation.

The progressive degeneration of retinal photoreceptors is one of the most significant causes of blindness in humans. Conjugated polymers represent an attractive solution to the field of retinal prostheses, and a multi-layer fully organic prosthesis implanted subretinally in dystrophic Royal College of Surgeons (RCS) rats was able to rescue visual functions. As a step toward human translation, we report here the fabrication and in vivo testing of a similar device engineered to adapt to the human-like size of the eye of the domestic pig, an excellent animal paradigm to test therapeutic strategies for photoreceptors degeneration. The active conjugated polymers were layered onto two distinct passive substrates, namely electro-spun silk fibroin (ESF) and polyethylene terephthalate (PET). Naive pigs were implanted subretinally with the active device in one eye, while the contralateral eye was sham implanted with substrate only. Retinal morphology and functionality were assessed before and after surgery by means of in vivo optical coherence tomography and full-field electroretinogram (ff-ERG) analysis. After the sacrifice, the retina morphology and inflammatory markers were analyzed by immunohistochemistry of the excised retinas. Surprisingly, ESF-based prostheses caused a proliferative vitreoretinopathy with disappearance of the ff-ERG b-wave in the implanted eyes. In contrast, PET-based active devices did not evoke significant inflammatory responses. As expected, the subretinal implantation of both PET only and the PET-based prosthesis locally decreased the thickness of the outer nuclear layer due to local photoreceptor loss. However, while the implantation of the PET only substrate decreased the ff-ERG b-wave amplitude with respect to the pre-implant ERG, the eyes implanted with the active device fully preserved the ERG responses, indicating an active compensation of the surgery-induced photoreceptor loss. Our findings highlight the possibility of developing a new generation of conjugated polymer/PET-based prosthetic devices that are highly biocompatible and potentially suitable for subretinal implantation in patients suffering from degenerative blindness.

The colour purity and versatility of fabrication of one-dimensional photonic crystals (1D PhCs) make them ideal candidates for colorimetric sensing of a variety of analytes. For instance, the detection of bacterial contaminants in food via colorimetric sensors can be highly appealing, as most of the existing detection techniques are in general time-consuming and the read-out requires specialised personnel. Here, we present a colorimetric sensor based on hybrid plasmonic/photonic 1D crystals. We demonstrate that the modification of the silver plasmon resonance brought about by the effective silver/bacterium interaction can be translated into the visible spectral region, producing a change in the structural colour. In addition, we observe a superior colorimetric sensitivity against the Gram negative Escherichia coli compared to the Gram positive Micrococcus luteus, a result that we attribute to the more efficient electrostatic interaction and cellular adhesion between the silver surface and the Gram-negative bacteria outer membrane. This approach demonstrates that in principle an easy colorimetric detection of bacterial contaminants can be achieved through the use of bio-responsive plasmonic materials, such as silver, whose selective electrostatic interaction with bacterial cell wall is well-known and occurs without the need of chemical functionalisation.

Chemically synthesized zigzag-edged nanographenes (NG) have recently demonstrated great success as the active laser units in solution-processed organic distributed feedback (DFB) lasers. Here, we report the first observation of dual amplified spontaneous emission (ASE) from a large-size NG derivative (with 12 benzenoid rings) dispersed in a polystyrene film. ASE is observed simultaneously at the 685 and 739 nm wavelengths, which correspond to different transitions of the photoluminescence spectrum. Ultrafast pump-probe spectroscopy has been used to ascertain the underlying photophysical processes taking place in the films. DFB lasers, based on these materials and top-layer nanostructured polymeric resonators (i.e., one or two-dimensional surface relief gratings), have been fabricated and characterized. Lasers emitting close to either one of the two possible ASE wavelengths, or simultaneously at both of them, have been prepared by proper selection of the resonator parameters. The Alicante team was funded by Spanish Government (MINECO) and European Community (FEDER), grant number MAT2015-66586-R. The researcher R.M-M was funded by a MINECO FPI fellowship (No. BES-2016-077681). The Singapore team was funded by the NRF Investigatorship programme (NRF-NRFI05-2019-0005). The Milan team has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 816313). G.M.P. acknowledges funding from Fondazione Cariplo, grant No. 2018-0979. C.D. and S.S. acknowledge funding from ERC Starting Grant SOLENALGAE (No. 679814).

Achieving an active manipulation of colours has huge implications in optoelectronics, as colour engineering can be exploited in a number of applications, ranging from display to lightning. In the last decade, the synergy of the highly pure colours of 1D photonic crystals, also known as Bragg stacks, with electro-tunable materials have been proposed as an interesting route to attain such a technologically relevant effect. However, recent works rely on the use of liquid electrolytes, which can pose issues in terms of chemical and environmental stability. Here, we report on the proof-of-concept of an electrolyte free and solution-processed electro-responsive Bragg stack. We integrate an electro-responsive plasmonic metal oxide, namely indium tin oxide, in a 1D photonic crystal structure made of alternating layers of ITO and TiO2 nanoparticles. In such a device, we observed a maximum of 23 nm blue-shift upon the application of an external bias (10 V). Our data suggest that electrochromism can be attained in all-solid state systems by combining a judicious selection of the constituent materials with device architecture optimisation.