Search

In this report, we demonstrate that both the thermal stability and the thermal conductivity of bromobutyl rubber (BIIR) nanocomposites could be improved by incorporating the ionic liquids (ILs) modified graphene oxide (GO-ILs) using a solution compounding method. The structure, thermal stability and thermal conductivity of this newly modified BIIR nanocomposites were systematically analyzed and studied. The X-ray diffraction (XRD) analysis of GO-ILs showed that ILs had been effectively intercalated into the interlayer of GO, which was found to be able to raise the exfoliation degree of GO. The increased exfoliation degree facilitated a good dispersion of GO-ILs in the BIIR matrix, as revealed by the scanning electron microscope (SEM) images. The glass transition temperatures (Tg) of the GO-ILs/BIIR nanocomposites were also raised by the addition of GO-ILs, which indicates the strong interfacial adhesion between GO-ILs and the rubber. Most importantly, the incorporation of GO-ILs in the BIIR matrix could effectively improve the thermal stability of the rubber nanocomposites according to our thermogravimetric analysis (TGA). The activation energy (Ea) of thermal decomposition of GO-ILs/BIIR nanocomposites increases with the addition of GO-ILs. Besides, the thermal conductivity of GO-ILs/BIIR nanocomposite with 4 wt% of GO-ILs had 1.3-fold improvement compared to that of unfilled BIIR.

The effects of organic aluminum phosphate (NA-21) and rare earth organic coordination compounds (WBG), serving as α, β nucleating agents, on crystallization and mechanical properties of high-fluid polypropylene (PP) have been investigated. As determined by differential scanning calorimetry, the isothermal crystallization temperature of PP increased from 126.5 to 137.7 °C and 133.6 °C with NA-21 and WBG, respectively. The two endothermal melting peaks of PP blending with WBG indicated the transformation of β-crystal. The wide-angle X-ray diffraction pattern and melting behavior of PP blending with WBG testified that a high proportion of β-crystal, which was more than 70%, was induced, while the crystal-phase of PP modified with NA-21 had little change. The mechanical properties of nucleated PP were tested by tensile testing machine and izod pendulum impact tester. A dramatic increment of impact strength, as high as 191%, was obtained for PP with the introduction of WBG, comparing to 132% by NA-21 addition. The impact fracture surfaces were observed by scanning electron microscope; the resistance of crack growth of nucleated PP was better than that of pure PP. Although flexural strength of PP improved in both scenarios, the influence of nucleators on yield strength of PP differed. Yield strength of PP increased by 8.5% when using 0.2 wt% NA-21, but decreased by 6% when using WBG at the same content. Therefore, WBG, a novel β-nucleator, played an essential role in enhancing impact strength of PP.