Search

The aerodynamics of transport aircraft at the borders of the flight envelope is characterized by complex interactions and nonlinear, unsteady flow phenomena. The underlying physical mechanisms are not fully understood, and a prediction of aerodynamic properties, transient loads, and aeroelastic behavior is a major challenge that requires the use of sophisticated numerical models and dedicated experiments. A new research initiative investigates the three-dimensional buffet mechanisms at high-speed stall, the interaction of the wing wake with the empennage, and the influence of ultra-high-bypass-ratio-type engines on these phenomena. It comprises unsteady pressure-sensitive paint surface pressure and time-resolved particle image velocimetry flowfield measurements carried out in the cryogenic European Transonic Windtunnel. The experiments are conducted at different Mach numbers and cover a broad Reynolds number regime up to [Formula: see text] using the generic Airbus XRF1 configuration as a reference. This paper explains the rationale of the research initiative, introduces the planned test entries and test conditions, and presents selected results of the first measurement campaign and associated numerical analyses by means of the computational fluid dynamics code TAU, including usage of locally scale resolving simulations. An analysis of numerical and experimental results is presented for a high incidence transonic condition that serves to discuss the topology of wing root flow separation, the evolution of the associated wake, and its interaction with the empennage.

In this work, wake-tail plane interactions are investigated for a tandem wing configuration in buffet conditions using hybrid RANS/LES simulations with the Automated Zonal Detached Eddy Simulation (AZDES) method. The analyzed configuration consists of two untapered and unswept wing segments, representative of a wing-tail plane configuration. The shock oscillation on the front wing segment and the development of its turbulent wake are characterized, including a spectral analysis of the pressure and velocity fluctuations in the wake and a modal analysis of the flow field applying Proper Orthogonal Decomposition (POD). The impact of the wake on the aerodynamics and loads of the rear wing segment is then studied, with a spectral analysis of its lift and surface pressure oscillations. Finally, the influence of the position and the incidence angle of the rear wing segment are investigated. For the considered flow conditions, 2D buffet is present on the front wing segment. During the downstream movement of the shock, the amount of separation reaches its minimum and small vortices are present in the wake. During the upstream movement of the shock, the amount of separation is at its maximum and larger turbulent structures are present together with high fluctuation levels of velocity and pressure. A distinct peak can be associated with the meandering motion of wake vortices, identified by means of a modal analysis of the flow field using Proper Orthogonal Decomposition. The impingement of the wake causes a strong variation of the loading of the rear wing segment. A comparably low-frequent oscillation of the lift coefficient, attributed to the change of intensity of the downwash caused by the front segment, can be distinguished from fluctuations of high frequency that are caused by the impingement of the turbulent structures in the wake., Updated arXiv version to version published in CEAS Aeronautical Journal

This work provides an overview of aerodynamic data acquired in the European Transonic Windtunnel using an XRF-1 transport aircraft configuration both at cruise conditions and at the edges of the flight envelope. The goals and design of the wind tunnel test were described, highlighting the use of the cryogenic wind tunnel’s capability to isolate the effects of $$M_{\infty }$$ M ∞ , $${\text{Re}}_{\infty }$$ Re ∞ and the dynamic pressure q/E. The resulting dataset includes an aerodynamic baseline characterization of the full span model with vertical and horizontal tailplanes and without engine nacelles. The effects of different inflow conditions were studied using data from continuous polars, evaluating the changes in aeroelastic deformation which are proportional to q/E and the influence of $$M_{\infty }$$ M ∞ and $${\text{Re}}_{\infty }$$ Re ∞ on the shock position. Off-design data was analyzed at the lowest and highest measured Mach numbers of 0.84 and 0.90, respectively. Wing lower surface flow and underside shock motion was analyzed at negative angles of attack using $${{c}_{\text{p}}}$$ c p distribution and unsteady pressure transducer fluctuation data, identifying significant upstream displacement of the shock close to the leading edge. Wing upper-side flow and the shock motion near buffet onset and beyond was analyzed using unsteady pressure data from point transducers and unsteady pressure-sensitive paint (PSP) measurements. Buffet occurs at lower angles of attack at high Mach number, and without clearly defined lift break. Spectral contents at the acquired data points in the buffet range suggest broadband fluctuations at Strouhal numbers between 0.2 and 0.6, which is consistent with recent literature. The spanwise shock propagation velocities were determined independently via analysis of unsteady PSP and pressure transducers to be in the range between $$u_{\text{s}} / u_{\infty } = 0.24$$ u s / u ∞ = 0.24 and 0.32, which is similarly in line with published datasets using other swept wing aircraft models.