Search

Over the last decade, the continuing decline in the cost of digital computing technology has brought about a dramatic transformation in how digital instrumentation for radio astronomy is developed and operated. In most cases, it is now possible to interface consumer computing hardware, e.g. inexpensive graphics processing units and storage devices, directly to the raw data streams produced by radio telescopes. Such systems bring with them myriad benefits: straightforward upgrade paths, cost savings through leveraging an economy of scale, and a lowered barrier to entry for scientists and engineers seeking to add new instrument capabilities. Additionally, the typical data-interconnect technology used with general-purpose computing hardware -- Ethernet -- naturally permits multiple subscribers to a single raw data stream. This allows multiple science programs to be conducted in parallel. When combined with broad bandwidths and wide primary fields of view, radio telescopes become capable of achieving many science goals simultaneously. Moreover, because many science programs are not strongly dependent on observing cadence and direction (e.g. searches for extraterrestrial intelligence and radio transient surveys), these so-called "commensal" observing programs can dramatically increase the scientific productivity and discovery potential of an observatory. In this whitepaper, we detail a project to add an Ethernet-based commensal observing mode to the Jansky Very Large Array (VLA), and discuss how this mode could be leveraged to conduct a powerful program to constrain the distribution of advanced life in the universe through a search for radio emission indicative of technology. We also discuss other potential science use-cases for the system, and how the system could be used for technology development towards next-generation processing systems for the Next Generation VLA., Comment: Astro2020 APC White Paper

The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper we catalog the current offerings of the CASPER collaboration, and instruments past and present built by CASPER users and developers. We describe the ongoing state of software development, as CASPER looks to support a broader range of programming environments and hardware and ensure compatibility with the latest vendor tools., 24 pages, 6 figures, 5 tables. Accepted to the Journal of Astronomical Instrumentation 26 October 2016

Includes bibliographical references, Modern radio astronomy telescopes the world over require digital back-ends. The complexity of these systems depends on many site-specific factors, including the number of antennas, beams and frequency channels and the bandwidth to be processed. With the increasing popularity for ever larger interferometric arrays, the processing requirements for these back-ends have increased significantly. While the techniques for building these back-ends are well understood, every installation typically still takes many years to develop as the instruments use highly specialised, custom hardware in order to cope with the demanding engineering requirements. Modern technology has enabled reprogrammable FPGA-based processing boards, together with packet-based switching techniques, to perform all the digital signal processing requirements of a modern radio telescope array. The various instruments used by radio telescopes are functionally very different, but the component operations remain remarkably similar and many share core functionalities. Generic processing platforms are thus able to share signal processing libraries and can acquire different personalities to perform different functions simply by reprogramming them and rerouting the data appropriately. Furthermore, Ethernet-based packet-switched networks are highly flexible and scalable, enabling the same instrument design to be scaled to larger installations simply by adding additional processing nodes and larger network switches. The ability of a packetised network to transfer data to arbitrary processing nodes, along with these nodes' reconfigurability, allows for unrestrained partitioning of designs and resource allocation. This thesis describes the design and construction of the first working radio astronomy imaging instrument hosted on Ethernet-interconnected re- programmable FPGA hardware. I attempt to establish an optimal packetised architecture for the most popular instruments with particular attention to the core array functions of correlation and beamforming. Emphasis is placed on requirements for South Africa's MeerKAT array. A demonstration system is constructed and deployed on the KAT-7 array, MeerKAT's prototype. This research promises reduced instrument development time, lower costs, improved reliability and closer collaboration between telescope design teams.

Polarized foreground emission is a potential contaminant of attempts to measure the fluctuation power spectrum of highly redshifted 21 cm HI emission from the epoch of reionization. Using the Donald C. Backer Precision Array for Probing the Epoch of Reionization (PAPER), we present limits on the observed power spectra of all four Stokes parameters in two frequency bands, centered at 126 MHz ($z=10.3$) and 164 MHz ($z=7.66$) for a three-month observing campaign of a 32-antenna deployment, for which unpolarized power spectrum results have been reported at $z=7.7$ (Parsons et al 2014) and $7.5 < z < 10.5$ (Jacobs et al 2014). The power spectra in this paper are processed in the same way as in those works, and show no definitive detection of polarized power. This non-detection appears to be largely due to the suppression of polarized power by ionospheric rotation measure fluctuations, which strongly affect Stokes Q and U. We are able to show that the net effect of polarized leakage is a negligible contribution at the levels of of the limits reported in Parsons et al 2014 and Jacobs et al 2014., Accepted by ApJ

We present a catalog of spectral measurements covering a 100-200 MHz band for 32 sources, derived from observations with a 64-antenna deployment of the Donald C. Backer Precision Array for Probing the Epoch of Reionization (PAPER) in South Africa. For transit telescopes such as PAPER, calibration of the primary beam is a difficult endeavor, and errors in this calibration are a major source of error in the determination of source spectra. In order to decrease reliance on accurate beam calibration, we focus on calibrating sources in a narrow declination range from -46d to -40d. Since sources at similar declinations follow nearly identical paths through the primary beam, this restriction greatly reduces errors associated with beam calibration, yielding a dramatic improvement in the accuracy of derived source spectra. Extrapolating from higher frequency catalogs, we derive the flux scale using a Monte-Carlo fit across multiple sources that includes uncertainty from both catalog and measurement errors. Fitting spectral models to catalog data and these new PAPER measurements, we derive new flux models for Pictor A and 31 other sources at nearby declinations. 90% of these confirm and refine a power-law model for flux density. Of note is the new Pictor A flux model, which is accurate to 1.4% and shows, in contrast to previous models, that between 100 MHz and 2 GHz, the spectrum of Pictor A is consistent with a single power law given by a flux at 150 MHz of 382+/-5.4 Jy, and a spectral index of -0.76+/-0.01. This accuracy represents an order of magnitude improvement over previous measurements in this band, and is limited by the uncertainty in the catalog measurements used to estimate the absolute flux scale. The simplicity and improved accuracy of Pictor A's spectrum make it an excellent calibrator for experiments seeking to measure 21cm emission from the Epoch of Reionization., Accepted to ApJ, includes two data files

We present new constraints on the 21cm Epoch of Reionization (EoR) power spectrum derived from 3 months of observing with a 32-antenna, dual-polarization deployment of the Donald C. Backer Precision Array for Probing the Epoch of Reionization (PAPER) in South Africa. In this paper, we demonstrate the efficacy of the delay-spectrum approach to avoiding foregrounds, achieving over 8 orders of magnitude of foreground suppression (in $\textrm{mK}^2$). Combining this approach with a procedure for removing off-diagonal covariances arising from instrumental systematics, we achieve a best 2-sigma upper limit of $(41\,\textrm{mK})^2$ for $k=0.27 h\textrm{Mpc}^{-1}$ at $z=7.7$. This limit falls within an order of magnitude of the brighter predictions of the expected 21cm EoR signal level. Using the upper limits set by these measurements, we generate new constraints on the brightness temperature of 21cm emission in neutral regions for various reionization models. We show that for several ionization scenarios, our measurements are inconsistent with cold reionization. That is, heating of the neutral intergalactic medium (IGM) is necessary to remain consistent with the constraints we report. Hence, we have suggestive evidence that by $z=7.7$, the HI has been warmed from its cold primordial state, probably by X-rays from high-mass X-ray binaries or mini-quasars. The strength of this evidence depends on the ionization state of the IGM, which we are not yet able to constrain. This result is consistent with standard predictions for how reionization might have proceeded., Comment: 24 pages, 11 figures, 3 appendices. Replaced with version accepted to ApJ

We present new observations with the Precision Array for Probing the Epoch of Reionization (PAPER) with the aim of measuring the properties of foreground emission for 21cm Epoch of Reionization experiments at 150 MHz. We focus on the footprint of the foregrounds in cosmological Fourier space to understand which modes of the 21cm power spectrum will most likely be compromised by foreground emission. These observations confirm predictions that foregrounds can be isolated to a "wedge"-like region of 2D (k-perpendicular, k-parallel)-space, creating a window for cosmological studies at higher k-parallel values. We also find that the emission extends past the nominal edge of this wedge due to spectral structure in the foregrounds, with this feature most prominent on the shortest baselines. Finally, we filter the data to retain only this "unsmooth" emission and image specific k-parallel modes of it. The resultant images show an excess of power at the lowest modes, but no emission can be clearly localized to any one region of the sky. This image is highly suggestive that the most problematic foregrounds for 21cm EoR studies will not be easily identifiable bright sources, but rather an aggregate of fainter emission., Comment: 6 pages, 5 figures, updated to match version accepted to ApJL

We are developing the Precision Array for Probing the Epoch of Reionization (PAPER) to detect 21cm emission from the early Universe, when the first stars and galaxies were forming. We describe the overall experiment strategy and architecture and summarize two PAPER deployments: a 4-antenna array in the low-RFI environment of Western Australia and an 8-antenna array at our prototyping site in Green Bank, WV. From these activities we report on system performance, including primary beam model verification, dependence of system gain on ambient temperature, measurements of receiver and overall system temperatures, and characterization of the RFI environment at each deployment site. We present an all-sky map synthesized between 139 MHz and 174 MHz using data from both arrays that reaches down to 80 mJy (4.9 K, for a beam size of 2.15e-5 steradians at 154 MHz), with a 10 mJy (620 mK) thermal noise level that indicates what would be achievable with better foreground subtraction. We calculate angular power spectra ($C_\ell$) in a cold patch and determine them to be dominated by point sources, but with contributions from galactic synchrotron emission at lower radio frequencies and angular wavemodes. Although the cosmic variance of foregrounds dominates errors in these power spectra, we measure a thermal noise level of 310 mK at $\ell=100$ for a 1.46-MHz band centered at 164.5 MHz. This sensitivity level is approximately three orders of magnitude in temperature above the level of the fluctuations in 21cm emission associated with reionization., 13 pages, 14 figures, submitted to AJ. Revision 2 corrects a scaling error in the x axis of Fig. 12 that lowers the calculated power spectrum temperature

Time-to-science is an important figure of merit for digital instrumentation serving the astronomical community. A digital signal processing (DSP) community is forming that uses shared hardware development, signal processing libraries, and instrument architectures to reduce development time of digital instrumentation and to improve time-to-science for a wide variety of projects. We suggest prioritizing technological development supporting the needs of this nascent DSP community. After outlining several instrument classes that are relying on digital instrumentation development to achieve new science objectives, we identify key areas where technologies pertaining to interoperability and processing flexibility will reduce the time, risk, and cost of developing the digital instrumentation for radio astronomy. These areas represent focus points where support of general-purpose, open-source development for a DSP community should be prioritized in the next decade. Contributors to such technological development may be centers of support for this DSP community, science groups that contribute general-purpose DSP solutions as part of their own instrumentation needs, or engineering groups engaging in research that may be applied to next-generation DSP instrumentation., 11 pages, 4 figures, Astro2010 Decadal Survey White Paper in TEC: Technology Development