Search

A 3D network capture substrate based on poly(lactic-co-glycolic acid) (PLGA) nanofibers was studied and successfully used for high-efficiency cancer cell capture. The arc-shaped glass micropillars were prepared by chemical wet etching and soft lithography. PLGA nanofibers were coupled with micropillars by electrospinning. Given the size effect of the microcolumn and PLGA nanofibers, a three-dimensional of micro-nanometer spatial network was prepared to form a network cell trapping substrate. After the modification of a specific anti-EpCAM antibody, MCF-7 cancer cells were captured successfully with a capture efficiency of 91%. Compared with the substrate composed of 2D nanofibers or nanoparticles, the developed 3D structure based on microcolumns and nanofibers had a greater contact probability between cells and the capture substrate, leading to a high capture efficiency. Cell capture based on this method can provide technical support for rare cells in peripheral blood detection, such as circulating tumor cells and circulating fetal nucleated red cells.

A highly integrated MnO2-based device combined rapid capture, in-situ delivery, and efficient release of cancer cells.

Contact electrification between water and a solid surface is crucial for physicochemical processes at water–solid interfaces. However, the nature of the involved processes remains poorly understood, especially in the initial stage of the interface formation. Here we report that H 2 O 2 is spontaneously produced from the hydroxyl groups on the solid surface when contact occurred. The density of hydroxyl groups affects the H 2 O 2 yield. The participation of hydroxyl groups in H 2 O 2 generation is confirmed by mass spectrometric detection of 18 O in the product of the reaction between 4-carboxyphenylboronic acid and 18 O–labeled H 2 O 2 resulting from 18 O 2 plasma treatment of the surface. We propose a model for H 2 O 2 generation based on recombination of the hydroxyl radicals produced from the surface hydroxyl groups in the water–solid contact process. Our observations show that the spontaneous generation of H 2 O 2 is universal on the surfaces of soil and atmospheric fine particles in a humid environment.

Cell-based high-throughput screening is a key step in the current disease-based research, drug development, and precision medicine. However, it is challenging to establish a rapid culture and screening platform for rare cells (patient-derived) due to the obvious differences between the traditional 2D cell model and the tumor microenvironment, as well as the lack of a low-consumption screening platform for low numbers of cells. Here, we developed an acoustic drop-assisted superhydrophilic-superhydrophobic microarray platform for the rapid culture and screening of a few cells. By employing hydrophilic and hydrophobic microarrays, we can automatically distribute the cell suspension into uniform droplets, and these cells can spontaneously form compact 3D cell spheroids within 36 h (similar to the microenvironment of tumors in vivo). By using the acoustic droplet ejection device, we can accurately inject a drug solution with a volume of ∼pL to ∼nL into the droplet, and the whole process can be completed within 20 ms (one print). By using three different cell lines (Caco-2, MCF-7, and HeLa) to optimize the platform, the culture and screening of five patients' colon cancer were subsequently realized. Using three conventional chemotherapeutics (5-fluorouracil, cetuximab, and panitumumab) of various concentrations, the best treatment was screened out and compared with the actual treatment effect of the patients, and the results were extremely similar. As a proof-of-concept application, we have proved that our platform can quickly cultivate patient samples and effectively screen the best treatment methods, highlighting its wide application in precision medicine, basic tumor research, and drug development.

Highly sensitive detection of DNA is of great importance for the detection of genetic damage and errors for the diagnosis of many diseases. Traditional highly sensitive organic electrochemical transistor (OECT)-based methods mainly rely on good conductivity materials, which may be limited by complex synthesis and modification steps. In this work, DNA biosensor based on OECT and hybridization chain reaction (HCR) signal amplification was demonstrated for the first time. Au nanoparticles were electrochemically deposited on the Au gate electrode to increase the surface area. Then, the HCR products, long negatively charged double-stranded DNA, were connected to the target by hybridization, which can increase the effective gate voltage offset of OECT. This sensor exhibited high sensitivity and even 0.1 pM target DNA could be directly detected with a significant voltage shift. In addition, it could discriminate target DNA from the mismatched DNA with good selectivity. This proposed method based on HCR in DNA detection exhibited an efficient amplification performance on OECT, which provided new opportunities for highly sensitive and selective detection of DNA.

Solar energy-powered adsorption-based atmospheric water harvesting (ABAWH) is an emerging technology for freshwater production, especially in water-scarce regions that are remote and landlocked. Numerous water adsorbents have been used in ABAWH devices to convert molecule to liquid water. However, it is still challenging to harvest water from the air in cold winter, owing to the water adsorption of sorbents decreasing significantly at low temperature. Herein, we designed and fabricated an ABAWH device by integrating composited ionic liquids (CILs) with carbon nanotubes (CNTs) photothermal materials on the surface of cotton rod fibers. CILs extract water from the air. CNTs enable light-to-heat conversion and drive the solar evaporation process. Importantly, the cotton rods offer a backbone porous structure to maintain its internal temperature at 20 °C under solar irradiation, and thus promote the water adsorption performance of CILs at low environmental temperature. Freshwater is successfully harvested under environment temperature of 6 °C, 30% RH and solar irradiation intensity of 0.6 kW m−2. The water yield can achieve 1.49 kg per m2 per day in an outdoor environment. We believe that the ABAWH device offers a promising approach to effectively harvest water from the air at low temperature and humidity conditions.

The heterogeneity of cancer has become a major obstacle to treatment, and the development of an efficient, fast, and accurate drug delivery system is even more urgent. In this work, we designed a device that integrated multiple functions of cell capture

A new dual-recognition fluorescent biosensor for circulating tumor DNA (ctDNA) detection has been developed, which combines the clamping function of peptide nucleic acid (PNA) and terminal protection of small-molecule-linked DNA (TPSMLD). Taking the tumor-specific E542K mutation and methylation of the PIK3CA gene as the target ctDNA, a low detection limit of 0.3161 pM ctDNA is achieved with good selectivity. This study not only offers a sensitive, selective and accurate ctDNA detection method, but can also be used to detect the target in complex biological samples.

MicroRNAs play important roles in disease diagnosis and therapy. However, current methods for microRNA detection suffer from low sensitivity and cannot directly detect short microRNAs. Herein, we have developed a highly sensitive and selective fluorescent method for direct microRNA detection by combining the duplex-specific nuclease-assisted recycling amplification and the nicking enzyme-powered three-dimensional DNA walker. Target microRNA initiates duplex-specific nuclease-assisted recycling amplification, releasing numerous bipedal walking strands. The released bipedal walking strands hybridize with carboxyfluorescein-labeled track DNA and form nicking recognition site. Driven by the hydrolysis of the nicking enzyme, the bipedal walking strand autonomously moves along the track strand, releasing a large number of carboxyfluorescein-labeled DNA fragments and generating obvious fluorescence signals. This dual-signal amplification method can directly detect microRNA 21 as low as 130 fM and has good selectivity. The proposed method is not only simple for nucleic acid design, but also can be used as a universal method for the highly sensitive detection of all RNAs.

Planar-type perovskite solar cells (p-PSCs) based on SnO2 have garnered further attention due to their simple and low-temperature fabrication. Improving the critical properties of the electron transport layer (ETL) is an effective way to enhance the performance of p-PSC devices. Here, a brand-new method is developed to relieve the contact recombination caused by the rough fluorine-doped tin oxide (FTO) surface and further boosts the electrical concentration of the ETL. A SnO2-ethylene diamine tetraacetic acid (EDTA) acylamide compound (SEAC) with hydrogen bond-induced adjustable cluster size is reported for the first time. The rational choice of the SEAC cluster size is the key for obtaining the smooth interfacial morphology of the ETL on the rugged FTO substrate. In addition, the energy band gap decreases with the increasing cluster size, and consequently, results in improved electrical conductivity of the SEAC. The upshifted Fermi energy level leads to higher electron concentration, which is an important physical quantity of the ETL. The PSC devices based on the optimized SEAC achieve an improved power conversion efficiency of 21.29% with negligible J-V hysteresis due to significantly enhanced electron transport and reduced contact charge recombination at the ETL/perovskite interface. In general, this paper comes up with a unique strategy to improve the quality of the SnO2-based ETL.

Non-adherent cells play key roles in various biological processes. Studies on this type of cell, especially at single-cell resolution, help reveal molecular mechanisms underlying many biological and pathological processes. The emerging microfluidics technology has developed effective methods for analyzing cells. However, it remains challenging to treat and monitor single live non-adherent cells in an in situ, long-term, and real-time manner. Herein, a microfluidic platform was set up to generate and anchor cell-laden water-in-oil-in-water (W/O/W) double emulsions (DEs) to investigate these cells. Within the device, W/O/W DEs encapsulating non-adherent cells were generated through two adjacent flow-focusing structures and subsequently anchored in an array of microchambers. These droplets maintained the W/O/W structure and the anchorage status in the continuous perfusion fluid for at least one week. The mass transfer of different molecules with suitable molecular weights and partition coefficients between the interior and exterior of W/O/W DEs could be regulated by perfusion fluid flow rates. These features endow this platform with potential to continuously supply encapsulated non-adherent cells with nutrients or small-molecule stimuli/drugs through fluid perfusion. Meanwhile, the confinement of cells in the anchored DEs favored long-term monitoring of cellular dynamic behaviors and responses. As a proof of concept, fluorescein diacetate (FDA) was employed to visualize the cellular uptake and biochemical metabolism of TF-1 human erythroleukemia cells. We believe that this W/O/W DE anchorage and perfusion platform would benefit single-cell-level studies as well as small-molecule drug discovery requiring live non-adherent cells.

Li metal is considered a highly desirable anode for next-generation high-energy-density rechargeable lithium batteries. However, irregular Li dendrite formation and infinite relative volume changes prevent the commercial adoption of Li-metal anodes. Here, electrophoretic deposition of black phosphorus (BP) on commercial Cu foam (BP@Cu foam) is reported to regulate Li nucleation for the first time. First-principles calculations reveal that the unique two-dimensional (2D) structure of BP is beneficial to Li intercalation and propagation. Compared with the random Li nucleation and growth on bare Cu foam, Li ions are preferably confined into the BP layers, which induces uniform Li nucleation at the early stage of the Li deposition and guides the following lateral Li growth on BP@Cu foam. In addition, the three-dimensional (3D) porous and conductive framework of Cu foams further mitigate the volume change and dissipate the current density. Attributing to these merits, the BP@Cu foam exhibits significantly enhanced Coulombic efficiency and cycling stability compared with bare Cu foam. In the full-cell configuration paired with a Li4Ti5O12 or LiFePO4 cathode, the BP@Cu foam also boosts the battery performances. This work provides new insights into the development of BP and other elaborate 2D materials for achieving dendrite-free Li-metal anodes.

A new dual-recognition fluorescent biosensor for circulating tumor DNA (ctDNA) detection has been developed, which combines the clamping function of peptide nucleic acid (PNA) and terminal protection of small-molecule-linked DNA (TPSMLD). Taking the tumor-specific E542K mutation and methylation of the PIK3CA gene as the target ctDNA, a low detection limit of 0.3161 pM ctDNA is achieved with good selectivity. This study not only offers a sensitive, selective and accurate ctDNA detection method, but can also be used to detect the target in complex biological samples.

Using PEGylated nanoparticles and light-sensitive azobenzenes, a multicolor fluorescence layer-by-layer film loading drug has been constructed based on hydrogen bonding. The multilayer film exhibited multi-responsive drug release properties.

A method for the generation of visible-light-controllable drug release polyelectrolyte multilayers on poly(L-lactide) (PLLA) microneedles is developed by host–guest chemistry. In response to visible light irradiation, model drugs encapsulated on polyelectrolyte multilayers transfer into the skin following brief microneedle application.

Cell-free DNA has been widely used in non-invasive prenatal diagnostics (NIPD) nowadays. Compared to these incomplete and multi-source DNA fragments, fetal nucleated red blood cells (fNRBCs), once as an aided biomarker to monitor potential fetal pathological conditions, have re-attracted research interest in NIPD because of their definite fetal source and the total genetic information contained in the nuclei. Isolating these fetal cells from maternal peripheral blood and subsequent cell-based bio-analysis make maximal genetic diagnosis possible, while causing minimal harm to the fetus or its mother. In this paper, an affinity microchip is reported which uses hydroxyapatite/chitosan nanoparticles as well as immuno-agent anti-CD147 to effectively isolate fNRBCs from maternal peripheral blood, and on-chip biomedical analysis was demonstrated as a proof of concept for NIPD based on fNRBCs. Tens of fNRBCs can be isolated from 1 mL of peripheral blood (almost 25 mL-1 in average) from normal pregnant women (from the 10th to 30th gestational week). The diagnostic application of fNRBCs for fetal chromosome disorders (Trisomy 13 and 21) was also demonstrated. Our method offers effective isolation and accurate analysis of fNRBCs to implement comprehensive NIPD and to enhance insights into fetal cell development.

This paper presents a total phosphorus online real-time monitoring system integrated with on-chip digestion based on the merits of optofluidic technology. The integrated optofluidic device contains a hollow optical fiber employed for pretreatment and digestion of phosphorus solution samples, a polydimethylsiloxane (PDMS)-based micromixer with convergent&ndash, divergent walls designed to enable sufficient mixing and chromogenic reaction, and a couple of optical fiber collimators attached with a Z-shaped flow cell for optical detection. Details of system design and fabrication are introduced in this paper. In the experiment, on-chip digestion of four typical phosphates in aqueous solution including organophosphorus and inorganic phosphorus is investigated under different reaction conditions, such as digestion temperature, concentration of oxidant and pH value, and the optimal reaction parameters are explored under different conditions. Meanwhile, we demonstrate the online real-time monitoring function of the optofluidic device, and the digestion mechanisms of four different phosphates are analyzed and discussed. Compared with the national standard method, we find that the measurement accuracy and sensitivity are acceptable when the concentration of total phosphorus is between 0.005&ndash, 0.9 mg/L (by weight of P) in aqueous solution, which covers the range defined in the national standard. The traditional digestion time of several hours is greatly reduced to less than 10 s, and the content of total phosphorus can be obtained in a few minutes. The integrated optofluidic device can significantly shorten the test time and reduce the sample amount, and also provides a versatile platform for the real-time detection and analysis of many biochemical samples.

Controllable three-dimensional villose titanium dioxide architectures grown on carbon textiles are fabricated by a facile one-step in-situ hydrothermal method at low temperatures. It has in fact been proven to be an effective method to reduce self-aggregation and promote lithium-ion intercalate/extract via building 3D architectures based on 2D conductive materials. More importantly, the freestanding electrodes without any addition of conductive agents and polymeric binders reveal significant improvement in high-rate capacity and cycling performance.

Herein, we demonstrate a sustainable strategy for scalable production of α-Fe2O3 nanocrystals on flexible carbon textiles via controllable chemical bath deposition process. The assembly of α-Fe2O3 nanocrystals is densely anchored onto the carbon textiles, and the temperature-dependent mass loading and crystal size of α-Fe2O3 are systematically investigated. As an integrated electrode for lithium-ion batteries, the optimized Fe2O3@CTs with ultrathin three-dimensional interconnected porous architectures achieves significantly enhanced cycling performance and rate capability attributing to the improved stability, electronic interconnection, and shortened solid state diffusion pathway for Li+ ions/electrons. After the reactivation of the precursor, the Li-ion batteries based on the recycled Fe2O3@CTs exhibits electrochemical performance with no decay compared to that of the devices based on the fresh products. This sustainable methodology, considering material abundance, eco-efficiency, synthetic approach and scalability, is of crucial importance to both academy and industry for achieving high-performance lithium-ion batteries.

Cell encapsulation based on droplet microfluidics has been widely adopted in single cell researches, and corresponding highly-uniform cell-laden microgels play significant roles in tissue engineering and cell therapy. However, the encapsulation always faces challenges to maintain favorable cell viability. Herein, based on a double flow-focusing regime, cells were encapsulated in biocompatible sodium alginate droplets, and enveloped in oil droplets to form double emulsions. Ca2+ ions in the outer aqueous phase diffused through the oil and introduced the gelation of sodium alginate to form cell encapsulation. This indirect gelation process and the spontaneous detachment of oil helped to keep cell viability well, which was validated by FDA/PI staining tests.

Here is reported a fluorescent biosensor for glucose detection based on water-soluble and pH-responsive silicon nanodots. The silicon nanodots were prepared using a facile hydrothermal method. The ...

Cell morphology and nucleus deformation are important when circulating tumor cells break away from the primary tumor and migrate to a distant organ. Cells are sensitive to the microenvironment and respond to the cell–material interfaces. We fabricated TiO2 nanorod arrays with mesoscopic micro–nano interfaces through a two-step hydrothermal reaction method to induce severe changes in cell morphology and nucleus deformation. The average size of the microscale voids was increased from 5.1 to 10.5 μm when the hydrothermal etching time was increased from 3 to 10 h, whereas the average distances between voids were decreased from 0.88 to 0.40 μm. The nucleus of the MCF-7 cells on the TiO2 nanorod substrate that was etched for 10 h exhibited a significant deformation, because of the large size of the voids and the small distance between voids. Nucleus defromation was reversible during the cells proliferate process when the cells were cultured on the mesoscopic micro-nano interface.This reversible process was regu...

We have demonstrate a facile strategy to achieve the controllable morphology transformation of TiO2 induced by the introduction of multi-walled carbon nanotubes. The intervention of functionalized carbon nanotubes (CNTs) is key to the formation of TiO2 nanopompons. Furthermore, the size of the obtained TiO2 nanopompons can be controlled by modulating the CNT amounts. The obtained TiO2 nanopompon-embedded CNT hybrid networks (TNP@CNT HNs) incorporate the advantages of hierarchical nanostructures and 3D interconnected conductive networks, including high surface area, uniform particle/pore size, short Li+ ion/electron transport pathway, and high electronic conductivity. These TNP@CNT HN-based anodes achieve a significant improvement in the insertion/extraction of Li+ ions and electrochemical performances via optimizing the CNT amounts and the size of the TiO2 nanopompons. The lithium-ion batteries based on the optimized TNP@CNT HNs exhibit excellent cycling stability (keeping approximately 200 mA h g−1 after 500 cycles at 2C rate, 1C = 170 mA g−1) and rate performance (approximately 125 mA h g−1 at 20C rate with a capacity retention of 77% after 2000 cycles).

At present, most target recognition and classification approaches are based on inverse synthetic aperture radar (ISAR) imaging and feature extraction of the target image. Consequently, the discriminating performance severely depends on the imaging quality. Especially in the poor signal-to-noise ratio (SNR) environment, since the signal is usually immersed in strong noise, the image quality obtained by the conventional imaging method is extremely poor, which is not conducive to feature extraction and target recognition. To solve this problem, an end-to-end identification approach based on the neural network is proposed in this paper. Aiming at the characteristic of the echo data, a two-stream fusion convolutional neural network (CNN) architecture is designed to realize the end-to-end processing of “input data-output discriminant”. The simulation results verify the effectiveness of the proposed approach. In particular, it presents better robustness under low SNR.

This work demonstrates a bottom-up model of fabricating a honeycomb-inspired interface consisting of micro- and nanostructures for improving poly(dimethylsiloxane) (PDMS) hydrophobicity. TiO2 nanorod arrays and microsized voids were fabricated by a two-step hydrothermal reaction method. First, rutile TiO2 nanorod arrays were hydrothermally fabricated on the fluorine-doped SnO2 conductive substrates substrate. Second, microsized TiO2 voids were synthesized through HCl hydrothermal etching to obtain a honeycomb-inspired interface with tunable size. The size of the etched voids increased from 0.22 ± 0.06 to 8.0 ± 2.8 μm. The interfaces were then transferred on the PDMS surface to improve hydrophobic property. The contact angles of the corresponding positive PDMS replicas reached 140° after etching with the TiO2 nanorod arrays for 10 h. The size of mastoid structures on the PDMS surfaces was 7.5 μm, which is similar to the size of microstructures on the lotus leaf surface. The fabricated PDMS surface with tunable hydrophobicity properties can be used in the microfluidic channels in the future.

International audience; Background: Due to the high transfer ability of cancer cell, cancer has been regarded as a worldwide high mortality disease. Quantitative analysis of circulating tumor cells (CTCs) can provide some valuable clinical information that is particularly critical for cancer diagnosis and treatment. Along with the rapid development of micro-/nano-fabrication technique, the three-dimensional (3D) bionic interface-based analysis method has become a hot research topic in the area of nanotechnology and life science. Micro-/nano-structure-based devices have been identified as being one of the easiest and most effective techniques for CTCs capture applications.Methods: We demonstrated an electrospun nanofibers-deposited nickel (Ni) micropillars-based cytosensor for electrochemical detection of CTCs. Breast cancer cell line with rich EpCAM expression (MCF7) were selected as model CTCs. The ultra-long poly (lactic-co-glycolic acid) (PLGA) nanofibers were firstly-crosswise stacked onto the surface of Ni micropillars by electrospinning to construct a 3D bionic interface for capturing EpCAM-expressing CTCs, following immuno-recognition with quantum dots functionalized anti-EpCAM antibody (QDs-Ab) and forming immunocom-plexes on the micro-/nano-chip.Results: The Ni micropillars in the longitudinal direction not only play a certain electrical conductivity in the electro-chemical detection, but also its special structure improves the efficiency of cell capture. The cross-aligned nanofibers could simulate the extracellular matrix to provide a good microenvironment which is better for cell adhesion and physiological functions. Bioprobe containing quantum dots will release Cd 2+ in the process of acid dissolution, resulting in a change in current. Beneath favourable conditions, the suggested 3D cytosensor demonstrated high sensitivity with a broad range of 10 1-10 5 cells mL −1 and a detection limit of 8 cells mL −1.Conclusions: We constructed a novel 3D electrochemical cytosensor based on Ni micropillars, PLGA electrospun nanofibers and quantum dots bioprobe, which could be used to highly sensitive and selective analysis of CTCs. More significantly, the 3D cytosensor can efficiently identify CTCs from whole blood, which suggested the potential applications of our technique for the clinical diagnosis and therapeutic monitoring of cancers.

A cost-effective method that used electroplating to fabricate a 3D polydimethylsiloxane (PDMS) passive micromixer was developed in this work. The mixer fabrication process characteristics were as follows: The chip design was transferred to indium tin oxide (ITO) glass via photolithography; the ITO glass was vertically immersed in a nickel electroplating solution; and the ITO glass was raised up by controlling by the syringe pump, while electroplating was in progress. In this method, the height of the mixing structure could increase gradient from 15 to 30 μm. Compared with a flat structure, this structure could increase mixing efficiency by at least 10 %. The mixing efficiency with this 3D microstructure can reach more than 80 %. This 3D microstructure fabrication method can be easily integrated with other PDMS functional structures for future point-of-care diagnostic applications because of the advantages of this technique.

This study demonstrates how to successfully bridge the gap between nanoscale shape-memory function and macroscale motion using a bottom-up approach. This was achieved by first fabricating a photoswitchable surface-molecular-imprinted layer-by-layer (LbL) film capable of memorizing the shape and size of template molecules when illuminated. This photoswitch was built on the fundamental supramolecular interaction between an α-cyclodextrin-modified template acting as a photosocket and an azobenzene-modified poly(acrylic acid) photoplug. Corresponding patterns applied by cover-printing and wet photolithography were used to illustrate the stability of the binding sites; a simple and clean method was developed for removing the template–dye by UV irradiation. A functional fusion of nanoimprints and macroscopic materials was subsequently established by applying LbL coating technology to poly(d,l-lactic acid) (PDLLA) modified to have a shape-memory effect. Macroscopic changes in shape were found to cause deformatio...

We introduce a micropillar-based microfluidic device for efficient and rapid cancer cell capture. The microfluidic chip consists of two linear arrays of micropillars integrated with a herringbones flow-derived microstructure, and the separation distance between two adjacent micropillars is similar to the size of tumor cells. Cancer cells can be forced to come into contact with the micro-columns and are then captured by specific immune antibody–antigen interactions. Both previously published data and new available experimental data confirm the superiority of the proposed device. Different cancer cell lines were utilized to investigate the capture efficiency of our microfluidic device. MCF-7 cancer cells spiked into DMEM culture medium can be captured from a suspension with over 90% efficiency. The results of the present work provide a promising method for separation of rare cells, such as circulating tumor or fetal cells.

We fabricated large size alginate beads using a simple microfluidic device under a co-axial injection regime. This device was made by PDMS casting with a mold formed by small diameter metal and polytetrafluorothylene tubes. Droplets of 2% sodium alginate were generated in soybean oil through the device and then cross-linked in a 2% CaCl2 solution, which was mixed tween80 with at a concentration of 0.4 to 40% (w/v). Our results showed that the morphology of the produced alginate beads strongly depends on the tween80 concentration. With the increase of concentration of tween80, the shape of the alginate beads varied from semi-spherical to tailed-spherical, due to the decrease of interface tension between oil and cross-link solution. To access the biocompatibility of the approach, MCF-7 cells were cultured with the alginate beads, showing the formation of cancer cells clusters which might be useful for future studies.

We demonstrate the isolation of circulating tumor cells (CTCs) with a biocompatible nano-film composed of TiO2 nanoparticles. Due to the enhanced topographic interaction between nano-film and cancer cell surface, cancer cells (HCT116) spiked into PBS and healthy blood can be recovered from the suspension, whose efficiencies were respectively 80 % and 50 %. Benifit from the biocompatibility of this nano-film, in-situ culture of the captured cancer cells is also available, which provides an alternative selection when the capture cell number was inadequate or the sample cannot be analyzed immediately. For the proof-of-concept study, we use this nano-film to separate the circulating tumor cells from the colorectal and gastric cancer patient peripheral blood samples and the captured CTCs are identified by a three-colored immunocytochemistry method. We investigated the cancer cells capture strength at the nano-bio interface through exposing the cells to fluid shear stress in microfluidic device, which can be utilized to increase the purity of CTCs. The result indicated that 50 % of the captured cells can be detached from the substrate when the fluid shear stress was 180 dyn cm(-2). By integration of this CTCs capture nano-film with other single cell analysis device, we expected to further explore their applications in genome sequencing based on the captured CTCs.

Assays toward analysis of rare heterogeneous cells among identical specimen raise a significant challenge in many cell biological studies and clinical diagnosis applications. In this work, we report a disk-like hydrogel bead-based stratagem for rare cell researches at single cell level after a facile microfluidic-based particle synthesis approach. Cells of interested can be encapsulated into alginate droplets which are subsequently solidified into disk-like calcium alginate hydrogel beads and the bead size and cell number inside can be precisely controlled. Due to stability, permeability and disk-like shape of calcium alginate beads, cells immobilized in the disk-like beads can be treated with different chemicals with limited mechanical or fluidic operation influences and observed without distortion comparing with conventional methods or droplet microfluidic methods. Identification of circulating tumor cells, related to early-stage cancer diagnosis, is targeted to demonstrate the potential of our technique in rare cell analysis. This hydrogel bead-based stratagem is performed in immunofluorescence staining treatment and observation of cancer cells from normal hematological cells in blood sample. This method would have a great potential in single cell immobilization, manipulations and observation for biochemical cellular assays of rare cells.

Three-dimensional branched TiO2 architectures (3D BTA) with controllable morphologies were synthesized via a facile template-free one-pot solvothermal route. The volume ratio of deionized water (DI water) and diethylene glycol in solvothermal process is key to the formation of 3D BTA assembled by nanowire-coated TiO2 dendrites, which combines the advantages of 3D hierarchical structure and 1D nanoscale building blocks. Benefiting from such unique structural features, the BTA in full bloom achieved significantly increased specific surface areas and shortened Li(+) ion/electrons diffusion pathway. The lithium-ion batteries based on BTA in full bloom exhibited remarkably enhanced reversible specific capacity and rate performance, attributing to the high contact area with the electrolyte and the short solid state diffusion pathway for Li(+) ion/electrons promoting lithium insertion and extraction.

In this work, we developed a shape-controllable nozzle inside a multilayer PDMS microchip. The nozzle was able to control the shape of the fluid channel in three dimensions. All the four walls of the fluid channel were comprised of pneumatic PDMS membrane valves, and their deformation was controlled by air pressure. As both the limitation of the fluid flux and the shape of the fluid channel were adjustable spatially in three dimensions, this valve-based nozzle generated droplets with less response time and in a more effectively controlled manner comparing to conventional droplet devices. It could also function as a microinjector to modulate the compositions of droplets precisely and continuously. In addition, the nozzle was able to form a specific shape to generate core–shell particles.

Microfluidics-based circulating tumor cell (CTC) isolation is achieved by using gelatin-coated silica microbeads conjugated to CTC-specific antibodies. Bead-binding selectively enlarges target cell size, providing efficient high-purity capture. CTCs captured can be further released non-invasively. This stratagem enables high-performance CTC isolation for subsequent studies.

We report a feasible method that can precisely control the fission of droplets by modulating the flow resistance using pneumatic valves. Multilayer soft lithography was used to fabricate the valves. They can be used as variable microfluidic resistor (VMR) to dramatically change the flow resistance. A simulation has been done to forecast the behavior of droplets. We used this technique to control break-up of generated droplets and direct their motion. Droplets with different volume ratios were obtained in one chip. To investigate the mechanism, an equivalent electrical circuit was introduced to compare with the fluid network. This method could potentially be applied to different geometries, especially for the microfluidic network consisting of a set of two parallel channels with a common inlet and different outlets in bifurcating channels. Besides, manipulation of bubbles was also demonstrated.

Detection of circulating tumor cells (CTCs) in peripheral blood is of paramount significance for cancer diagnosis, progress evaluation, and individualized therapy. However, the rareness and heterogeneity of CTCs introduces significant challenges in the capture of cancer cells as well as downstream genetic analysis. In this work, a microwell-assisted multiaptamer immunomagnetic platform (MMAIP) is proposed for highly efficient capture of CTCs with minimum influence of heterogeneity. Assisted by a microwell chip, the purity of CTCs is greatly improved, thus meeting the requirement of downstream gene analysis. This is, as far as is known, the first aptamer based platform enabling mutation analysis of the captured CTCs from cancer patients, which will contribute to the practical application of aptamers in clinics.

Determination of the presence and number of circulating tumor cells (CTCs) in peripheral blood can provide clinically important data for prognosis and therapeutic response patterns. In this study, a versatile supersandwich cytosensor was successfully developed for the highly sensitive and selective analysis of CTCs using Au-enwrapped silica nanocomposites (Si/AuNPs) and three-dimensional (3D) microchips. First, 3D microchips were fabricated by a photolithography method. Then, the prepared substrate was applied to bind graphene oxide, streptavidin and biotinylated epithelial-cell adhesion-molecule antibody, resulting in high stability, bioactivity, and capability for CTCs capture. Furthermore, horseradish peroxidase and anti-CA153 were co-linked to the Si/AuNPs for signal amplification. The performance of the cytosensor was evaluated with MCF7 breast cancer cells. Under optimal conditions, the proposed supersandwich cytosensor showed high sensitivity with a wide range of 10(1) to 10(7) cells per mL and a detection limit of 10 cells per mL. More importantly, it could effectively distinguish CTCs from normal cells, which indicated the promising applications of our method for the clinical diagnosis and therapeutic monitoring of cancers.

A CTCs detection assay using transparent MnO2 nanospheres thin films to capture and release of CTCs is reported. The enhanced local topography interaction between extracellular matrix scaffolds and the antibody-coated substrate leads to improved capture efficiency. CTCs captured from artificial blood sample can be cultured and released, represent a new functional material capable of CTCs isolation and culture for subsequent studies.

Aiming to highly efficient capture and analysis of circulating tumor cells, a micropillar device decorated with graphite oxide-coated magnetic nanoparticles is developed for magneto-controllable capture and release of cancer cells. Graphite oxide-coated, Fe3 O4 magnetic nanoparticles (MNPs) are synthesized by solution mixing and functionalized with a specific antibody, following by the immobilization of such modified MNPs on our designed micropillar device. For the proof-of-concept study, a HCT116 colorectal cancer cell line is employed to exam the capture efficiency. Under magnetic field manipulation, the high density packing of antibody-modified MNPs on the micropillars increases the local concentration of antibody, as well as the topographic interactions between cancer cells and micropillar surfaces. The flow rate and the micropillar geometry are optimized by studying their effects on capture efficiency. Then, a different number of HCT116 cells spiked in two kinds of cell suspension are investigated, yielding capture efficiency >70% in culture medium and >40% in blood sample, respectively. Moreover, the captured HCT116 cells are able to be released from the micropillars with a saturated efficiency of 92.9% upon the removal of applied magnetic field and it is found that 78% of the released cancer cells are viable, making them suitable for subsequent biological analysis.

A nanostructured platform that combines electrospun TiO(2) nanofibers (TiNFs)-deposited substrate and cell-capture agent realizes significant capture of circulating tumor cells (CTCs). The enhanced local topographic interactions between the horizontally packed TiNFs deposited substrates and extracellular matrix scaffolds, in addition to anti-EpCAM/EpCAM biological recognition, contributes to the significantly enhanced capture efficiency compared to flat surfaces.