Search

Wood-staining fungal pigments have shown potential use as colorants for wood and textiles, with organic solvents as the pigment carrier. Natural oils have been suggested as an environmentally friendly and more available carrier; however, oils promoted color degradation. The current study examined the mechanism of said degradation and tested therapeutic and food-grade oils (instead of finishing oils) for their potential to carry draconin red, the pigment from Scytalidium cuboideum, without color loss over time. FTIR analysis from finishing oils indicated that oxidation was not likely the cause of color loss as the pigment could not be distinguished from the oils in the IR spectra. SEM was employed to determine if crystal degradation was contributing to color loss and indicated, surprisingly, that the crystals of draconin red formed rather than degraded over time. This suggested crystal breakdown was also not likely the cause of color loss. The pigment did not show degradation in hemp oil, flaxseed oil, and cold-pressed linseed oil when treated with β-carotene. Further in-depth chemical studies are needed to determine the mechanism of color loss in pigmented natural oils; however, food-grade oils appear to be a promising alternative to carry draconin red, without degradation of the color.

Spalted wood stabilization through various heat-treated resins has become a popular method for dealing with heavily decayed wood that no longer has enough structure to be usable. Among the most popular resins are the solutions of mixed methacrylated esters, which are often tinted with synthetic colorants to add an artificial colored layer to zone line-spalted wood as well as to stabilize the white-rotted areas. This research found that spalting pigments (technically dyes, but referred to as pigments in biological fields)—extracted from spalted wood—could be used in place of the synthetic colorants, thereby adding additional spalting to the wood without any associated decay (and adding additional spalting while stabilizing the wood with the same type of fungi that decayed it in the first place). Of the three fungi tested, the red pigment from Scytalidium cuboideum had the deepest penetration (complete) of the wood and was color stable after the curing process. While the blue–green pigment from Chlorociboria aeruginosa effectively colored the surface of the wood, it did not appear internally. The yellow pigment from S. ganodermophthorum did not show on the wood. None of the fungal colorants affected the properties of the methacrylation. The results of this study offer an intriguing opportunity to replace synthetic colorants with natural ones, which may be particularly attractive to turners of spalted wood who tend to prize natural color over synthetic.

UV-light degradation of wood is one of the top reasons for consumer replacement of outdoor wooden structures. This type of degradation is seldom mechanical, and is instead often motivated by loss of aesthetics (graying). There are numerous commercial products available on the market that deal with this loss of color, many of which contain added pigments to ‘rejuvenate’ or ‘revitalize’ greyed wood. These pigments are almost uniformly synthetic. In contrast, pigments from wood decay fungi (spalting), which have been used in woodworking since the 1400s (intarsia), have remarkable optical (UV-light resistance) properties due to their naphthoquinonic configuration. In recent years the pigments made from these fungi have been extracted and tested across numerous substrates, from solar cells to textile dyes. In this work, researchers extracted pigments from Scytalidium cuboideum (red pigmentation) and Chlorociboria aeruginosa (blue-green pigmentation), solubilized the pigments in raw linseed oil, and tested the resulting solution on samples of Douglas-fir (Pseudotsuga menziesii) and western white pine (Pinus monticola). These mixtures were compared against a ‘stain and coat’ treatment (utilizing an aniline stain and coated with raw linseed oil), raw linseed oil, and untreated wood. The wood samples were then placed in an accelerated weathering machine (Q-UV) following the ASTM G154 standard, for 500 and 1000 h. The results showed that while no visible color change occurred to the wood when the pigmented oil was applied, the red pigment oil significantly lowered the coating degradation for both wood types at an exposure of 500 h. The results show the potential applications for fungal pigments in the wood coating industry, as it offers an increased coating service life. As there is a shift to renewable products, the pigments from wood decay fungi show potential as additives for wood coatings.

Spalting fungal pigments have shown potential in technologies ranging from green energy generation to natural colorants. However, their unknown toxicity has been a barrier to industrial adoption. In order to gain an understanding of the safety of the pigments, zebrafish embryos were exposed to multiple forms of liquid media and solvent-extracted pigments with concentrations of purified pigment ranging from 0 to 50 mM from Chlorociboria aeruginosa, Chlorociboria aeruginascens, and Scytalidium cuboideum. Purified xylindein from Chlorociboria sp. did not show toxicity at any tested concentration, while the red pigment dramada from S. cuboideum was only associated with significant toxicity above 23.2 uM. However, liquid cultures and pigment extracted into dichloromethane (DCM) showed toxicity, suggesting the co-production of bioactive secondary metabolites. Future research on purification and the bioavailability of the red dramada pigment will be important to identify appropriate use, however, purified forms of the blue-green pigment xylindein are likely safe for use across industries. This opens the door to the adoption of green technologies based on these pigments, with potential to replace synthetic colorants and less stable natural pigments.

Pollution from the international dye industry continues to be a global problem. Biotechnology offers new options, including a closer look at select wood decay fungi to replace inorganic dyes. The pigments produced by a small group of soft rotting fungi are generally naphthoquinonic and remarkably stable. From this group, the dramada crystals, produced by Scytalidium cuboideum, are of particular interest. To test the application of this pigment as a natural colorant of cellulosic pulps, four different bleached pulps were selected (one hardwood, three softwood), in three different mediums (acetone, ethanol, and DI water). The pigment generated a significant change of color, but there was no significant difference in color intensity based on the solvent carrier. These preliminary results are promising as they open the door for further exploration of applications of fungal pigments in the paper industry. Once these pigments can be reliably grown, they will offer a sustainable organic alternative to polluting inorganic dyestuffs and help reduce the toxic effluent released into the soil and waterways.

Identification of effective natural dyes with the potential for low environmental impact has been a recent focus of the textile industry. Pigments derived from spalting fungi have previously shown promise as textile dyes, however, their use has required numerous organic solvents with human health implications. This research explored the possibility of using linseed oil as a carrier for the pigment from Scytalidium cuboideum as a textile dye. Colored linseed oil effectively dyed a range of fabrics, with natural fibers showing better coloration. Scanning electron microscopy (SEM) revealed a pigment film over the fabric surface. While mechanical testing showed no strength loss in treated fabric, colorfastness tests showed significant changes in color in response to laundering and bleach exposure with variable effects across fabric varieties. SEM investigation confirmed differences in pigmented oil layer loss and showed variation in pigment crystal formation between fabric varieties. Heating of the pigmented oil layer was found to result in a bright, shiny fabric surface, which may have potential for naturally weatherproof garments.

Pigments from wood-decay fungi (specifically spalting fungi) have a long history of use in wood art, and have become relevant in modern science due to their longevity and colorfastness. They are presently under investigation as colorants for wood, bamboo, oils, paints and textiles. Major hurdles to their commercialization have been color repeatability (in that the same strain of the same species of fungus may produce different colors over time), and the binding of the pigments to glass storage containers. This is persistent as they do not naturally exist in a loose form. Due to these issues, the &lsquo, standard&rsquo, color for each was historically determined not by the amount of pigment, but by the color in a solution of dichloromethane (DCM), using the CIE L*a*b colorspace. This method of standardization severely limited the use of these pigments in industrial applications, as without a dry form, standard methodologies for repeatable color processing into other materials could not be easily implemented. Recent studies have developed a method to crystalize the red pigment from Scytalidium cuboideum (Sacc. &amp, Ellis) Sigler &amp, Kang, producing a highly pure (99%) solid crystal named &lsquo, Dramada&rsquo, Herein a method is detailed to compare the molarity of this crystallized pigment to variations in the color, to determine a color saturation curve (by weight) for the pigment from S. cuboideum in DCM and acetone. The molarities for this experiment ranged from 0.024 mM to 19 mM. Each molarity was color read and assigned a CIEL*a*b* value. The results showed that there was a correlation between the molarity and color difference, with the maximum red color occurring between 0.73 mM and 7.3 mM in DCM and between 0.97 mM to 0.73 mM in acetone. Extremely low molarities of pigment produced strong coloration in the solvent, and changes in molarity significantly affected the color of the solution. Having a saturation and color curve for the crystal &lsquo, from S. cuboideum will allow for the reliable production of distinct colors from a known quantity (by weight) of pigment, erasing the final hurdle towards commercial development of the crystallized pigment from S. cuboideum as an industrial dyestuff.

Pigments from wood-decay fungi (specifically spalting fungi) have a long history of use in wood art, and have become relevant in modern science due to their longevity and colorfastness. They are presently under investigation as colorants for wood, bamboo, oils, paints and textiles. Major hurdles to their commercialization have been color repeatability (in that the same strain of the same species of fungus may produce different colors over time), and the binding of the pigments to glass storage containers. This is persistent as they do not naturally exist in a loose form. Due to these issues, the ‘standard’ color for each was historically determined not by the amount of pigment, but by the color in a solution of dichloromethane (DCM), using the CIE L*a*b colorspace. This method of standardization severely limited the use of these pigments in industrial applications, as without a dry form, standard methodologies for repeatable color processing into other materials could not be easily implemented. Recent studies have developed a method to crystalize the red pigment from Scytalidium cuboideum (Sacc. & Ellis) Sigler & Kang, producing a highly pure (99%) solid crystal named ‘Dramada’. Herein a method is detailed to compare the molarity of this crystallized pigment to variations in the color, to determine a color saturation curve (by weight) for the pigment from S. cuboideum in DCM and acetone. The molarities for this experiment ranged from 0.024 mM to 19 mM. Each molarity was color read and assigned a CIEL*a*b* value. The results showed that there was a correlation between the molarity and color difference, with the maximum red color occurring between 0.73 mM and 7.3 mM in DCM and between 0.97 mM to 0.73 mM in acetone. Extremely low molarities of pigment produced strong coloration in the solvent, and changes in molarity significantly affected the color of the solution. Having a saturation and color curve for the crystal ‘Dramada’ from S. cuboideum will allow for the reliable production of distinct colors from a known quantity (by weight) of pigment, erasing the final hurdle towards commercial development of the crystallized pigment from S. cuboideum as an industrial dyestuff.

Intarsia was an art form popular between the 15th–18th centuries that used wood pigmented by spalting fungi to create detailed landscapes, portraits, and other imagery. These fungi are still used today in art but are also finding relevance in material science as elements of solar cells, textile dyes, and paint colorants. Here we show that the spalting fungus Scytalidium cuboideum (Sacc. and Ellis) Sigler and Kang produces a red/pink pigment that forms two distinct colors of crystals (red and orange)—a very rare occurrence. In addition, a second structure of the crystal is proved through nuclear magnetic resonance (NMR). This is only the second instance of a stable, naphthoquinone crystal produced by a fungus. Its discovery is particularly valuable for solar cell development, as crystalline materials have a higher electrical conductivity. Other fungi in this order have shown strong potential as thin films for solar cells.

The use of both naturally occurring and synthetic pigmented wood has been prevalent in woodcraft for centuries. Modern manifestations generally involve either woodworkers’ aniline dyes, or pigments derived from a special class of fungi known as spalting fungi. While fungal pigments are more renewable than anilines and pose less of an environmental risk, the carrier required for these pigments—dichloromethane (DCM)—is both problematic for humans and tends to only deposit the pigments on the surface of wood instead of evenly within the material. Internal coloration of wood is key to adoption of a pigmenting system by woodworkers. To address this issue, five solvents that had moderate solubility with the pigments extracted from Chlorociboria aeruginosa and Scytalidium cuboideum were identified, in the hopes that a reduction in solubility would result in a greater amount of the pigment deposited inside the wood. Of the tested solvents, acetonitrile was found to produce the highest internal color in ash, Douglas-fir, madrone, mountain hemlock, Port-Orford cedar, Pacific silver fir, red alder and sugar maple. While these carrier solvents are not ideal for extracting the pigments from the fungi, acetonitrile in particular does appear to allow for more pigment to be deposited within wood. The use of acetonitrile over DCM offers new opportunities for possible industrial spalting applications, in which larger pieces of wood could be uniformly pigmented and sold to the end user in larger quantities than are currently available with spalted wood.

The lengthy time periods required by current spalting methods prohibit the economically viable commercialization of spalted wood on a large scale. This work aimed to compare the effects of induced spalting in 16 Pacific Northwest woods using three common spalting fungi, Chlorociboria aeruginosa, Scytalidium cuboideum, and Scytalidium ganodermophthorum, with the significantly less time-consuming treatment of these woods using dichloromethane-extracted green, red, and yellow pigments from the same fungi. For pigment extracts, the dosage required for a pigment to internally color various wood species to 30% internal coverage was investigated. With few exceptions, treatment with pigment extracts outperformed induced spalting in terms of percent internal color coverage. Cottonwood consistently performed best with all three pigment solutions, although chinkapin performed as well as cottonwood with the red pigment, and Port Orford cedar performed as well with the yellow pigment. While no wood species showed 30% internal color coverage with the green pigment solution, a number of additional species, including pacific silver fir, madrone, dogwood, and mountain hemlock showed internal color coverage on the order of 20–30% for red and/or yellow. Cottonwood was determined to be the best suited wood species for this type of spalting application.

Twelve solvents were tested for their ability to extract the pigments of Chlorociboria aeruginosa and Scytalidium cuboideum, two fungi used primarily for the spalting of decorative wood. Solvents were assessed on the basis of the saturation of pigment produced, their ability to diffuse through filter paper, and whether they reacted with the extracted pigments. Solvents that performed well in extraction testing were then tested to determine whether they could also dissolve the extracted pigment once dried. Of the solvents tested, only dichloromethane was capable of quick, non-reactive extraction with filter paper diffusion, as well as being able fully to redissolve dried pigment extracted from C. aeruginosa. The results of this study show dichloromethane to be an ideal solvent for extracting and applying fungal pigments that offers new possibilities for spalting in which fungi do not need to be grown directly on a substrate in order to produce pigmented wood.

One of the most promising wood value-added processes currently under development is spalting, where pigment is added to wood via fungal colonization. Previous studies have shown laboratory level spalting to be achievable and highly predictable. However, large-scale spalting for potential commercial applications introduces a substantial number of additional variables which impact the spalting process. To test the potential of commercial-scale spalting, Acer saccharum, Fagus grandifolia, and Populus tremuloides logs were inoculated with multiple known spalting fungi utilizing both liquid spray cultures and live dowel pin cultures. Many of the fungi that successfully produce spalting in small, sterile cultures also produced significant amounts in large logs, with many spalting patterns identical to those found in small-scale testing. Pairings of Trametes versicolor/Scytalidium cuboideum and Xylaria polymorpha/Xylaria polymorpha (different isolates) produced significant amounts of zone lines. In addition, the method of inoculation impacted the amount of spalting: more zone lines were produced when fungi were introduced via plugs, while more stain was produced when liquid cultures were sprayed onto the logs. These results indicate that many of the standard spalting fungi are suitable for large-scale applications; however, the inoculation method appears to be a vital component for successful spalting under a restricted time schedule.

Compound (I) is shown to exhibit moderate antitumoric activity and no antimicrobial activity.

We report the presence of the two arthroconidial anamorphic fungi, Scytalidium cuboideum and Arthropsis hispanica, in clinical samples from the USA. Both fungi were morphologically and molecularly identified. The antifungal susceptibility of four isolates of A. hispanica and five of S. cuboideum to eight antifungal drugs is provided.

This research subjected four wood species pigmented with the red stain of Scytalidium cuboideum and Acer negundo wood pigmented with the tree’s naturally occurring red stain to natural and artificial UV light. Several commercially available coatings were applied to determine the effect of coating on the degradation of both red stains over time. The red stain of Acer negundo was found to be significantly less stable in UV light than the red pigment produced by S. cuboideum on any wood species, even A. negundo. None of the tested coatings significantly increased the pigment retention time of the red stain produced by A. negundo. The red stain of S. cuboideum was significantly affected by both coating and wood species; Populus tremuloides retained pigment significantly longer than Fagus grandifolia or Acer saccharum, and the Danish oil coating retained pigment significantly longer than the lacquer, water-based polyurethane with UV inhibitors, or the uncoated samples. Overall, lacquer increased the degradation rate of the red pigment produced by S. cuboideum, with the most pronounced increase occurring on F. grandifolia. These results indicate that the red-pigmented wood produced by A. negundo may not be appropriate for applications involving UV exposure, regardless of coating utilized. However, P. tremuloides wood pigmented with S. cuboideum may be appropriate for such applications, especially if Danish oil is applied as a coating.

Intarsia was an art form popular between the 15th&ndash, 18th centuries that used wood pigmented by spalting fungi to create detailed landscapes, portraits, and other imagery. These fungi are still used today in art but are also finding relevance in material science as elements of solar cells, textile dyes, and paint colorants. Here we show that the spalting fungus Scytalidium cuboideum (Sacc. and Ellis) Sigler and Kang produces a red/pink pigment that forms two distinct colors of crystals (red and orange)&mdash, a very rare occurrence. In addition, a second structure of the crystal is proved through nuclear magnetic resonance (NMR). This is only the second instance of a stable, naphthoquinone crystal produced by a fungus. Its discovery is particularly valuable for solar cell development, as crystalline materials have a higher electrical conductivity. Other fungi in this order have shown strong potential as thin films for solar cells.

Pigments that are currently available in the market usually come from synthetic sources, or, if natural, often need mordants to bind to the target substrate. Recent research on the fungal pigment extracts from Scytalidium cuboideum, Scytalidium ganodermophthorum, Chlorociboria aeruginosa, and Chlorociboria aeruginascens have been shown to successfully dye materials, like wood, bamboo, and textiles, however, there is no information about their binding mechanisms. Due to this, a microscopic study was performed to provide information to future manufacturers interested in these pigments. The results of this study show that S. ganodermophthorum and C. aeruginosa form an amorphous layer on substrates, while S. cuboideum forms crystal-like structures. The attachment and morphology indicate that there might be different chemical and physical interactions between the extracted pigments and the materials. This possibility can explain the high resistance of the pigments to UV light and color fastness that makes them competitive against synthetic pigments. These properties make these pigments a viable option for an industry that demands natural pigments with the properties of the synthetic ones.

Fungal pigments, specifically those generated from spalting fungi, are being developed for broader use in the wood and textile industry, and due to their coloration properties, may also be useful as aesthetic bamboo dyes. This paper evaluates the potential use of fungal pigments in bamboo (Phyllostachys spp.), and compares the difference between natural spalting and the direct application of extracted fungal pigments of three known spalting fungi: Scytalidium cuboideum, Scytalidium ganodermophthorum, and Chlorociboria aeruginosa. Bamboo was significantly spalted by S. cuboideum under live inoculation, while the other two fungi did not colonize. For the direct application of fungal pigments, bamboo did not develop internal pigmentation with any pigment, but did develop visible surface color for S. cuboideium and C. aeruginosa. Light microscopy and scanning electron microscopy confirmed the presence of hyphae in bamboo vessels and parenchyma. An HPLC analysis for simple sugars showed the presence of glucose but no sucrose. Results indicate that the extracted pigments of the aforementioned fungi are ideal for the surface treatment of bamboo, while only direct inoculation of S. cuboideum is appropriate for internal coloration.