Search

The ‘Eye-on-a-Chip’ was presented by Chan et al. (2015) as a ‘microfluidic’ tool to assess emulsification of silicone oil (SO) tamponades used in vitreoretinal surgery. This device features a thin cylindrical cavity replicating a cross-section of the eye which rotates back and forward, driving the motion of an oil and an aqueous phase. Flow patterns were studied in Eye-on-a-Chip geometries fabricated from polymethylmethacrylate with 1 mm and 2 mm high cavities, for saline, 0.5 Pa s and 1.0 Pa s SOs, and saline/SO combinations using particle-image velocimetry. The flow behaviour and acceleration times for regular disc geometries indicated that fluid motion was driven by the base and roof of the cavity, while circulation flows characteristic of the eye were not observed. The presence of a lens insert created eddies near this feature. No emulsification was observed. The 2D ‘Eye-on-a-Chip’ does not replicate the flow characteristics of the human eye. Reports of emulsification being observed in the device are discussed in the light of these findings.

Background Retrospective analysis of morphological and functional outcomes after pars-plana vitrectomy and Silicone-Oil (SO) endotamponade in acute postoperative endophthalmitis (APOE). Methods Minimum follow-up was 6 months. Every included patient received best-corrected visual acuity (BCVA) assessment, pre-operatively and at last follow-up. Spectralis OCT was used to investigate disorganization of inner (DRIL) and outer (DROL) retinal layers at 1, 3, 6 months and at last follow-up. OCT-A was performed to assess foveal avascular zone (FAZ) and vascular perfusion density (VPD) at 6 months and at last follow-up. Results Seventeen eyes were recruited. Postoperative findings: BCVA ≥ 20/40 (in 14 eyes); epiretinal membranes (13); hyperreflective epiretinal material soon after surgery in (6) SO-filled eyes; inner retinal layers atrophy (5); macular edema (2); DROL (4) with persistent EZ disruption at final visit (2); no significant difference between study and fellow eyes in central macular thickness, FAZ and VPD; VPD decreased in all cases with prominent disorganization of retinal architecture. Conclusion OCT changes after APOE can be persistent or completely/partially self-resolving and seems related to the outward progression path of the infection/inflammation from the vitreous cavity to the inner and outer retina, rather than to the surgery.

We report a case of a 57-year-old man, who underwent right eye silicone oil injection as a part of his surgical treatment for rhegmatogenous retinal detachment. Following this, on the first postoperative day, he developed acute postoperative intraocular inflammation. There was circumciliary congestion, diffuse corneal oedema, anterior chamber (AC) reaction, hypopyon and a pupillary membrane. The AC had not been entered during the surgery. No patients, who had been operated on the same day, or with the materials having the same batch number, developed similar reactions. We started the patient on hourly topical steroids and cycloplegics after which the patient’s condition showed gradual improvement. At the 2 weeks follow-up appointment, his pupillary membrane had completely contracted and the AC was quiet. This case highlights a clinical picture of acute postoperative silicone oil-induced ocular inflammation, which was resolved through medical management.

PURPOSE The aim of this report was to present the details of a case of culture-positive endophthalmitis in a silicone oil-filled eye. METHODS This report includes the description of the preoperative, intraoperative, and postoperative findings of the case. PATIENT A 73-year old male patient presented to our emergency room with complaints and symptoms indicative of acute post-vitrectomy endophthalmitis. RESULTS Aqueous, silicone oil, and vitreous washout samples tested positive for Streptococcus pneumoniae after culture test. DISCUSSION/CONCLUSION Culture-positive endophthalmitis in a silicone oil-filled eye has rarely been described in literature. The reported cases were culture-negative cases, possibly because they were cases of acute inflammatory reactions to silicone oil. In the present case, an otherwise healthy patient developed acute endophthalmitis after pars plana vitrectomy plus silicone oil tamponade. The case was successfully managed with conventional silicone oil removal, antibiotic injection, and silicone oil reinjection.

Addressing thrombosis and biofouling of indwelling medical devices within healthcare institutions is an ongoing problem. In this work, two types of ultra-low fouling surfaces (i.e., superhydrophobic and lubricant-infused slippery surfaces) were fabricated to enhance the biocompatibility of commercial medical grade silicone rubber (SR) tubes that are widely used in clinical care. The superhydrophobic (SH) coatings on the tubing substrates were successfully created by dip-coating in superhydrophobic paints consisting of polydimethylsiloxane (PDMS), perfluorosilane-coated hydrophobic zinc oxide (ZnO) and copper (Cu) nanoparticles (NPs) in tetrahydrofuran (THF). The SH surfaces were converted to lubricant-infused slippery (LIS) surfaces through the infusion of silicone oil. The anti-biofouling properties of the coatings were investigated by adsorption of platelets, whole blood coagulation, and biofilm formation in vitro. The results revealed that the LIS tubes possess superior resistance to clot formation and platelet adhesion than uncoated and SH tubes. In addition, bacterial adhesion was investigated over 7 days in a drip-flow bioreactor, where the SH-ZnO-Cu tube and its slippery counterpart significantly reduced bacterial adhesion and biofilm formation of Escherichia coli relative to control tubes (>5 log10 and >3 log10 reduction, respectively). The coatings also demonstrated good compatibility with fibroblast cells. Therefore, the proposed coatings may find potential applications in high-efficiency on-demand prevention of biofilm and thrombosis formation on medical devices to improve their biocompatibility and reduce the risk of complications from medical devices.

(1-x)BiScO3-xPbTiO3 (BS-PT) ceramics have excellent piezoelectricity and high Curie temperature at its morphotropic phase boundary (x=0.64), so it is a promising piezoelectric material for fabricating high temperature ultrasonic transducer (HTUT). Electric properties of 0.36BS-0.64PT ceramics were characterized at different temperature, and a HTUT with the center frequency of about 15 MHz was designed by PiezoCAD based on the measuring results. The prepared HTUT was tested in a silicone oil bath at different temperature systematically. The test results show that the HTUT can maintain a stable electrical resonance until 290 °C, and get a clear echo response until 250 °C with slight changes of the center frequency. Then a stepped metal block submerged in silicone oil was imaged by the HTUT until 250 °C. Velocity of silicone oil and axial resolution of the HTUT at different temperature were calculated. The results verify the capability of 0.36BS-0.64PT based HTUT for high temperature ultrasonic imaging applications.

The “gold standard” of modern vitreoretinal surgery is silicone oil tamponade of the vitreous cavity. The lens opacity development is in the list of complications of prolonged silicone oil eye filling (from 2 weeks to 2 years). Polydimethylsiloxanes hydrophobicity, direct contact with the front of the silicone bladder, macrophage and toxic reaction, trophic disturbances are the causes leading to the cataract initiation. This makes the problem of cataract surgery and preliminary intraocular lens calculation in silicone oil filled eyes before its removing very relevant as well as cloudy retina visualization and the necessity of minimization of number of operations through their combination. Certainly, the main error in IOL power calculation is associated with axial length measurement inaccuracy, as the most significant term of an equation. Silicone oil filled eyes biometry errors, and, consequently, postoperative refraction biases remain unresolved problem until now. To date authors report only 58 % of cases in which target refraction was achieved after combined surgery. Some researchers figure out that average calculation error after phacoemulsification with IOL implantation in avitreal eyes was 0.8 D despite of the optical biometry usage. Today it is represented by several methods: partial coherent interferometry, optical low-coherence reflectometry and optical coherence tomography, which are implemented in devices such as IOLMaster 500, Lenstar LS 900 and IOLMaster 700, which have their own characteristics and measurement accuracy. Their advantages as well as creation an accurate IOL calculation method for silicone oil filled eyes could reduce postoperative refraction error that outline significant medical and social problem.

Background: Silicone oil, which is one of the most commonly used endotamponades in vitreoretinal surgery, is removed after a certain period of time in most cases. In this study, we present our results with a unique cannula that provides effective and safe silicone oil removal. Aims and Objectives: To assess the aids and success of silicone oil removal with a novel 23-gauge cannula for the patients who underwent pars plana vitrectomy and silicone oil injection before. Materials and Methods: 72 eyes of 64 patients who operated by the same surgeon (FA) between May 2017 and May 2019 were involved in the study. The primary indications were proliferative diabetic retinopathy in 46 (63.9%) eyes and retinal detachment in 26 (36.1%) eyes. Phacoemulsification and intraocular lens implantation (23 eyes), membrane peeling (23 eyes), internal limiting membrane peeling (5 eyes), and argon laser endo-photocoagulation (37 eyes) performed in the same session. Furthermore, perfluorocarbon remnants aspirated in 9 eyes and 17 eyes needed suturing. Descriptive statistical analyses achieved by SPSS 10.5 statistical software. Results: The mean follow-up time was 11.7 + 2.5 months (between 3 and 23 months), and the mean age was 61.4 + 8.52 years (between 44 and 69 years). 1000 centistokes (cSt) silicone oil was removed from 61 (84.7%) eyes, and 5000 cSt silicone oil was removed from 11 (15.3%) eyes. The mean removal time was 2.04 + 0.1 min for 1000 cSt silicone oil and 5.11 + 0.3 min for 5000 cSt silicone oil. 4 re-detachment and 3 vitreous hemorrhage observed in follow-up period. Post-operative silicone oil remnants were not detected in any patient. Conclusion: The unique 23-gauge cannula provides silicone oil removal without any conjunctival cut-down and sclerotomy enlargement. Thus, it reduces the duration of surgery and post-operative recovery period.

Background To evaluate the effects of intravitreal silicone oil (SO) on the retinal and choroidal thickness in eyes with rhegmatogenous retinal detachment (RRD). Methods A literature search was performed in Web of Science, Scopus, ProQuest, Embase, Clinical Key, Science Direct, Cochrane Library, and Springer, as well as Persian databases, including IranDoc, MagIran, SID, MOH thesis, and MOH articles until June 2020. Two reviewers independently searched and extracted the data. Results Sixteen studies (n = 391) met the inclusion criteria. The meta-analysis showed that the SO tamponade could significantly reduce the central macular thickness (CMT) in patients with RRD as compared to gas tamponade WMD = − 14.91; 95% CI: − 22.23, − 7.60; P 2 = 71%). No significant change was found in CMT between the eye with SO tamponade (after SO removal) and the fellow healthy eye in patients with RRD (WMD = − 3.52; 95% CI: − 17.63, 10.59; I2 = 68.6%). Compared to the preoperative stage, the SO tamponade could significantly reduce the subfoveal choroidal thickness in patients with RRD (WMD = − 18.67, 95% CI: − 30.07, − 1.28; I2 = 80.1%). However, there was no significant difference in the subfoveal choroidal thickness before and after SO removal (WMD = − 1.13, 95% CI: − 5.97, 3.71; I2 = 87.6%). Conclusion The SO tamponade had a significant effect on the reduction of retinal layers and the subfoveal choroidal thickness.

Background: The Lenstar LS 900 (Haag-Streit AG, Koeniz, Switzerland) is an optical biometer, and its measurements are highly repeatable and precise in cataractous eyes. This study investigated changes in biometric parameters, including axial length (AL), anterior chamber depth (ACD), lens thickness (LT), vitreous cavity depth (VD), and central corneal thickness (CCT) before and after three-port 23-Gauge pars plana vitrectomy with silicone oil tamponade. Methods: This was a prospective follow-up study. Patients who were scheduled for surgery underwent a detailed slit-lamp examination and objective cycloplegic refraction preoperatively. In eligible cases, the Lenstar LS 900 was used to measure biometric parameters. At the 1-month postoperative follow-up, we repeated the same assessments for the silicone oil (SO)-filled eyes. Data were analyzed to assess the significance of changes and to test the possible correlation of values between the two time points. Results: Twenty-three patients with a mean ± SD age of 60 ± 12 years completed the study. Postoperatively, we found a significant increase in AL and a decrease in ACD and CCT (all P < 0.05), with no significant changes in LT and VD. A significant correlation was found for ACD, CCT, and cylinder values between the two time points (all P < 0.05). Postoperatively, the spherical and cylindrical components of refraction demonstrated a hyperopic shift, but did not change statistically significantly. Conclusions: The Lenstar LS 900 underestimated the ACD and overestimated the AL in SO-filled eyes when comparing pre- and postoperative values, in phakic as well as pseudophakic eyes. In planning for cataract surgery in this group of patients, it is more reasonable to calculate IOL power based on the biometric data of the fellow eye, although this may not eliminate possible errors. Further studies with a larger sample size, longer follow-up, and robust study design are necessary to confirm our preliminary results.

In this study, a silicon-containing cross-linked polymer, poly(1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane-co-ethylene glycol diacrylate) (p(V4D4-co-EGDA)), was deposited onto high-viscosity silicone oil using initiated chemical vapor deposition (iCVD). The ratio of the feed flow rate of V4D4 to EGDA was systematically studied, and the chemical composition and morphology of the top and bottom surfaces of the films were analyzed. The films were microstructured, and the porosity and thickness of the films increased with increasing V4D4 content. The top of the film was composed of densely packed and loosely packed microstructured regions. X-ray photoelectron spectroscopy on the top and bottom surfaces of the films showed a heterogeneous chemical composition along the thickness of the film, with higher silicon content on the top surface compared to that on the bottom surface. To the best of our knowledge, this is the first study of iCVD deposition of a silicon-containing polymer film onto silicone oil. The results of this study can be used for the synthesis of polymer precursor films for the fabrication, via pyrolysis, of silicon-based inorganic membranes for use in hydrogen production using silicone oil to prevent infiltration of monomer into the underneath membrane support structure during vapor deposition.

Introduction We described a case of initial unsuccessful outcome of failed macular hole treated with amniotic membrane, that resolved after amniotic membrane exchange and silicone oil injection. Case Description a woman affected by a high myopic macular hole that had failed to close after multiple surgeries, had been treated using an amniotic membrane graft and 20% sulfur hexafluoride but, after the gas reabsorption, the macular hole was still open, and the amniotic membrane. A second surgery with a second amniotic membrane patch and silicone oil was carried out. Two weeks after the procedure the macular hole closed, and the final visual acuity improved from 20/400 to 20/100. Conclusions In this case, a second surgery, using a new amniotic membrane graft and a longer-lasting endotamponade, closed the hole and improved the visual acuity.

To compare the anatomical and functional outcomes of silicone oil (SO)-filled foldable capsular vitreous body (FCVB) and SO endotamponade in vitrectomy for patients with no light perception after ocular trauma.A total of 64 patients (64 eyes) with no light perception caused by severe ocular trauma were divided into FCVB and SO groups based on the surgical treatment. The main outcome measurements were retinal reattachment rate, intraocular pressure, best-corrected visual acuity, and number of operations.Both the FCVB group (29 eyes) and the SO group (35 eyes) showed significant improvement in postoperative best-corrected visual acuity and intraocular pressure. The two groups showed no significant differences in final intraocular pressure and the retinal reattachment rate. The postoperative vision (≥LP) in the FCVB group was significantly worse than in the SO group (FCVB [4/29] vs. SO [18/35], P = 0.003). However, the number of surgeries in the FCVB group was significantly lower than in the SO group (FCVB [1.10] vs. SO [2.23], P0.001).Vitrectomy combined with SO endotamponade shows better short-term improvement in the treatment of no light perception caused by severe ocular trauma. However, SO-filled FCVB can effectively prevent many complications caused by direct SO endotamponade, such as secondary surgeries or SO dependence.

Parnian Arjmand,1,2 Tina Felfeli,1,3,4 Efrem D Mandelcorn,1,2,4 Mark S Mandelcorn1,2,4 1Department of Ophthalmology and Vision Sciences, University of Toronto, Toronto, Ontario, Canada; 2Department of Ophthalmology, Toronto Western Hospital, University Health Network, Toronto, Ontario, Canada; 3The Institute of Health Policy, Management and Evaluation (IHPME), Dalla Lana School of Public Health, University of Toronto, Toronto, Ontario, Canada; 4Faculty of Medicine, University of Toronto, Toronto, Ontario, CanadaCorrespondence: Mark S Mandelcorn Tel +1 416 603 5885Fax +1 416 603 5834Email mark.mandelcorn@utoronto.caPurpose: Silicone oil intraocular retinal tamponade is a useful adjunct to pars plana vitrectomy (PPV) in the treatment of complex vitreoretinal conditions. Siluron2000, a modified silicone oil product containing an additional small, high molecular weight and low viscosity, very-long-chain silicone molecule, was developed to reduce post-operative silicone oil emulsification, a non-infrequent complication that occurs with low molecular weight silicone oil. This study was designed to assess the safety and efficacy of long-term Siluron2000.Patients and Methods: This was a single-center, retrospective, observational study. All consecutive patients undergoing PPV with intravitreal Siluron2000 injection between January 2017 and September 2019 with at least 6-month follow-up were identified based on billing codes.Results: A total of 57 eyes of 57 consecutive patients comprising 51 cases of proliferative vitreoretinopathy and 6 cases of recurrent full thickness macular hole were included. Median follow-up was 18 months. Emulsification occurred in 9 patients (15%). Retinal re-attachment was achieved in 47 patients (82%). The median time without silicone oil emulsification was 17 months. Of the cases with residual retinal detachment (RD) despite intravitreal Siluron2000, 4 (7%) were total RDs and 6 (10%) were inferior RDs with attached macula. The most common complications were glaucoma 12 (21%), cataract 11 (19%), and epiretinal membrane 2 (3.5%). There was no association between the duration of Siluron2000 and visual outcomes.Conclusion: Siluron2000 is an effective long-term tamponade agent in the treatment of complex vitreoretinopathy. Visual and anatomical outcomes are similar to those reported with higher mw silicone oil tamponade agents but with a lower emulsification rate.Keywords: emulsification, proliferative vitreoretinopathy, silicone oil, tamponade, vitreoretinal surgery, long-term oil

Background. At present, intraocular drops of silicone oil, which is a lubricant for disposable syringes used for intravitreal injections, are being actively studied. Among the undesirable effects of their presence are patient’s complaints of visual discomfort associated with floating opacities, as well as a potential connection with episodes of intraocular inflammation and increased intraocular pressure.The aim: to assess the prevalence of silicone oil droplets in the vitreous in patients treated with multiple intravitreal injections.Materials and methods. A single-center retrospective cohort study was carried out. Inclusion criterion: treatment with multiple (at least 5) intravitreal injections of drug solutions performed according to registered indications. The study group consisted of 86 eyes of 85 patients (56 women, 29 men; age – from 36 to 89 y.o., average – 71.7 y.o.), who received an average of 13.2 injections of solutions of various drugs.Results. Drops of silicone oil were detected by biomicroscopy in 57 eyes (66.28 %) and by ultrasonography in 76 (88.37 %). The coincidence of the results of applying the methods was recorded in 73.26 % of observations. Seven (8.1 %) patients had characteristic complaints. Four patients (4.7 %) had a history of aseptic vitreitis. The hypothesis was confirmed that the possibility of silicone oil droplets getting into the vitreous increases with the number of intravitreal injections. A similar relationship was established in relation to the possibility of the appearance of characteristic complaints in patients due to the presence of drops and episodes of aseptic vitreitis.Conclusion. The release of drops of silicone oil from syringes during intravitreal injections is an urgent problem that requires further study. In the Russian Federation, the situation is aggravated by the lack of prefilled syringes with drugs approved for administration into the eye cavity, as well as the lack of syringe models designed for use in ophthalmology.

Degradation of therapeutic monoclonal antibodies (mAb) due to interfacial agitation through air bubbling was investigated. Samples containing mAb in phosphate buffered saline were subjected to rapid bubbling by using a peristaltic pump at an air flow rate of 11.5 mL/min. Samples were analyzed by visual observation, UV–Vis, fluorescence, circular dichroism and infrared spectroscopy, size-exclusion chromatography (SEC), dynamic light scattering, microscopy, and cell-based activity assays. The stressed samples showed increasing turbidity with bubbling time, with mAb1 showing a protein loss of 53% in the supernatant at the latest time point (240 min), indicating formation of sub-visible and visible aggregates. Aggregate rich samples exhibited altered secondary structure and higher hydrophobicity with 40% reduction in activity. The supernatants of the stressed samples showed unchanged secondary and tertiary structure without the presence of any oligomers in SEC. Furthermore, the impact of various factors that could affect aggregation was investigated and it was found that the extent of aggregation was affected by protein concentration, sample volume, presence of surfactants, temperature, air flow rate, and presence of silicone oil. In conclusion, exposure to air/liquid interfacial stress through bubbling into liquid mAb samples effectively generated sub-visible and visible aggregates, making air bubbling an attractive approach for interfacial stress degradation studies of mAbs.

Persistent froth is becoming more and more common in coal and mineral flotation plants and presents safety and operational challenges. No effective method has been developed to destabilise persistent froth. As a new initiative, this study examined the structural difference between persistent foam and coal froth, based on which a solution was developed to maximumly destabilise coal froth. Destabilisation test, oscillatory rheology measurement and scanning electron microscopy (SEM) analysis indicated that the coal froth was more stable than the foam due to the formation of thin capillaries and tightly arranged coal particles on bubble surfaces. Although 107 µm silicone oil droplet could completely destabilise the foam at 2 mmol/L concentration, it only destabilised less than 50% coal froth even at 6 mmol/L concentration. To maximumly destabilise the coal froth formed by −38 and −20 µm particles, 24 and 18 µm silicone oil droplets were required to pass through the thin capillaries and enter the bubble films, respectively. However, smaller silicone oil droplets could not bridge the bubble films to destabilise coal froth and therefore a critical droplet size occurred depending on the size of particles stabilising the froth.

Stable polyethylene glycol-in-silicone oil phase change emulsions were successfully prepared with a selected silicone surfactant. These oil-in-oil (o/o) emulsions have been scarcely examined up, despite the highly remarkable properties of both phases for energy recovery applications and cosmetic/pharmaceutical compositions. The objective of the present work was to study the effect of composition (surfactant and disperse phase concentrations) and the post-processing conditions (further agitation at the processing temperature for 24 h) on the final features of the emulsion. For this purpose, optical morphology, thermo-physical and the rheological behaviour of the emulsions and binary blends of their compounds were measured and analysed. Special attention has been paid to structural changes and crystallinity modifications of the emulsion disperse phase. The observed miscibility of the silicone surfactant and silicone chains with the disperse phase reduces its crystallinity degree and modifies in the crystallization mechanism of the polyethylene glycol, from heterogeneous to homogeneous nucleation. Interestingly, the change in the disperse phase crystallinity remarkably modifies final thermal and rheological properties of the emulsion.

Purpose: Here, we report a case of acute noninfectious endophthalmitis after removal of silicone oil (SO) and posterior capsulectomy in a patient with proliferative diabetic retinopathy.Case summary: SO removal and posterior capsulectomy were performed in a 61-year-old man who had undergone vitrectomy with combined cataract surgery, membrane peeling, laser photocoagulation, and SO injection to treat vitreous hemorrhage and tractional retinal detachment three months previously. The patient’s best-corrected visual acuity on the day after surgery was 20/50; it decreased to hand motion at five days after SO removal. Exudative membrane with hypopyon, anterior chamber cell (trace), and mild conjunctival injection were observed. The patient did not complain of ocular pain. Topical steroid was applied following a diagnosis of postoperative noninfectious endophthalmitis. The exudative membrane and hypopyon decreased after three days of treatment and had resolved completely after one month of treatment. The patient’s visual acuity improved to 20/50.Conclusions: Noninfectious endophthalmitis can develop after removal of SO and posterior capsulectomy. Topical steroid treatment is effective in such cases.

Background To investigate the clinical safety and efficacy of foldable capsular vitreous body (FCVB) in the treatment of severe silicone oil-dependent eyes. Methods Five patients (5 eyes) of severe silicone oil-dependent eyes underwent FCVB implantation from December 2019 to July 2020. The preoperative and postoperative visual acuity, intraocular pressure, corneal conditions, postoperative retinal reattachment, and FCVB status were observed. The patients were followed up for 12-15 months. Results A total of 5 patients (5 eyes) with severe silicone oil-dependent eyes were included, including 3 males and 2 females, with an average age of 32±14 years. The longest silicone oil tamponade time was 8 years, and the shortest was 2 years, with an average of 5±3 years. All patients were safely and successfully implanted with FCVB without severe intraoperative or postoperative complications. Up to the last follow-up, there was no significant change between preoperative and postoperative visual acuity. Before surgery, 4 patients had normal intraocular pressure while 1 patient had ocular hypotension; after surgery, the latter was still at a low level, and the other patients had intraocular pressure in the normal range. Conclusions The FCVB is a safe, feasible, and effective vitreous substitute to maintain ocular morphology and intraocular pressure without aggravating silicone oil emulsification, retinal displacement, or corneal degeneration during the implantation period of 12-15 months.

Purpose To evaluate the efficacy and safety of adequate silicone oil (SO) tamponade procedure in patients with complicated retinal detachment. Methods Thirty-one eyes in 31 patients were enrolled in this prospective case series. Adequate SO tamponade was performed by injecting the SO into the vitreous cavity and the entire anterior chamber, followed by posterior capsulotomy and inferior peripheral iridotomy. Preoperative and follow-up data including retinal anatomic reattachment and SO status, best-corrected visual acuity, intraocular pressure, surgical complications and management were collected and analyzed. Results Twenty-nine eyes presented with complete retinal reattachment after subsequent SO removal with a primary success rate of 93.5%. Seventeen patients (54.8%) had complete anterior chamber SO migration to the vitreous cavity within the first postoperative day. The average time for anterior chamber SO migration was 2.3 ± 1.8 days. No oil-fluid interface in the vitreous cavity was observed in all the eyes, indicating a relatively adequate SO tamponade. Acute intraocular pressure elevation occurred in 16 (51.6%) eyes and was controllable under medication (n = 16) and anterior chamber paracentesis (n = 1). Two patients developed recurrent retinal detachment and received SO removal and a secondary adequate SO tamponade. At final follow-up, all the eyes had SO removal for at least 3 months and retinas maintained completely attached. Conclusions The adequate SO tamponade procedure offers a simple, safe, and efficacious treatment alternative for complicated retinal detachment.

The separation of oil spillage from marine environments has been discussed as a global concern. Recyclable superhydrophobic magnetic particles with micro-nano structures have been considered as a potential providing a safe, practical, and easy method for removing the oil from oil-water. In this research, the hydrophobicity of magnetic particles was enhanced to achieve the maximum adsorption capacity. For this purpose, reacted carbonyl iron (CI) with glucose was reacted with stearic acid under different condition of temperature, time, and concentration. Analytical tests were performed to confirm the reaction of stearic acid with CI@glucose. The prickly shape created on the surfaces of magnetic particles led to achieving the maximum superhydrophobicity. In this connection, the optimized superhydrophobic particles based on the maximum obtained water contact angle (WCA) of 169° at 75 °C, and 3.5 h and 10% concentration of stearic acid were selected for the oil-water separation. The results revealed that the superhydrophobic particles had acceptable stability within pH range of 2–12. The adsorption capacity of the modified particles for hexane, silicone oil, gasoline, and kerosene was 4.1, 2.5, 3.1, and 3.7 g/g, respectively, with a high adsorption efficiency ( > 99.7%) in the oil-water mixture. After ten cycles of using these particles, the adsorption capacity range was 2 to 4 g/g regardless of the number of recycling times, and no significant change was observed in the contact angle.

This study presents gelatine-based and agar-based phantoms with an addition of glycerol, safflower oil, silicone oil and cellulose microcrystalline with a potential to cover the entire range of tissue diffusion coefficients and kurtosis values. Forty types of phantoms were prepared and examined for NMR relaxation times T1 and T2 and diffusional metrics D, K and ADC. Wide ranges of values of D (0.0003–0.0031 mm2s−1), K (0.00–7.24) and ADC (0.0002–0.0031 mm2s−1) were observed. Two of the phantoms closely mimic muscle and cortical gray matter with respect to water diffusion parameters. Although many of the presented phantoms display both D and K values within the range of human tissues, they match different tissues with respect to D and K. The imaging results for the gray matter simulating phantom injected with the liposomal solution, bear a resemblance to the particle size effect described in the literature. The phantoms presented in this work are simple in preparation and affordable tissue-simulating materials to be used primarily in development of diffusion kurtosis-based MRI methods and possibly in a preliminary assessment of MRI contrast agents. Further adjustments of the chemical compositions could potentially lead to development of new types of phantoms mimicking diffusional properties of more kinds of soft tissues.

Development of a biostable and biosafe vitreous substitute is highly desirable, but remains a grand challenge. Herein, we propose a novel strategy for constructing a readily administered vitreous substitute based on a thiol-acrylate clickable polyzwitterion macromonomer. A biocompatible multivinyl polycarboxybetaine (PCB-OAA) macromonomer is designed and synthesized, and mixed with dithiothreitol (DTT) via a Michael addition reaction to form a hydrogel in vitreous cavity. This resultant PCB-OAA hydrogel exhibits controllable gelation time, super anti-fouling ability against proteins and cells, excellent biocompatibility, and approximate key parameters to human vitreous body including equilibrium water content, density, optical properties, modulus. Remarkably, outperforming clinically used silicone oil in biocompatibility, this rapidly formed hydrogel in the vitreous cavity of rabbit eyes remains stable in vitreous cavity, showing an appealing ability to prevent significantly inflammatory response, fibrosis and complications such as raised intraocular pressure (IOP), and cataract formation. This zwitterionic polymer hydrogel holds great potential as a vitreous substitute., Graphical abstract Image 1, Highlights • A multivinyl polyzwitterion macromonomer is synthesized. • In situ formation of polyzwitterionic hydrogel enables easy operation in surgery. • This antifouling hydrogel exhibits approximate parameters to vitreous body. • The hydrogel shows excellent biocompatibility in vitreous cavity.

Currently, intravitreal injections are firmly in the lead as a drug delivery method for treatment of a wide range of eye diseases. With the accumulation of clinical material, knowledge about the complications and side effects of this technique is expanding. One of the undesirable phenomena that has been actively studied recently is the ingress of silicone oil droplets from single-use syringes and needles used to perform the procedure into the vitreous cavity of patients eyes. The analysis of the results of original studies on this issue is carried out, and the currently available practical recommendations aimed at reducing the risk of this complication are presented. The article is illustrated with original clinical examples. It can be concluded that the penetration of silicone oil into the eye cavity during intravitreal injections is an urgent problem of modern ophthalmology that requires further investigation and solution.

The purpose is to estimate the content of pro- and anti-inflammatory cytokines (IL-1 , IL-8, IL-10, MCP-1, ICAM-1, VEGF) in the tear liquid of patients with advanced proliferative diabetic retinopathy (PDR) and complicated primary cataract after phacoemulsification and IOL implantation performed simultaneously with vitreoretinal surgery vs. vitreoretinal surgery alone. Material and methods . 34 patients with PDR and complicated primary cataract were divided into two groups. Group 1 received a two-phase surgical procedure: (a) vitreoretinal surgery (VRS) with silicone oil tamponade followed by (b) phacoemulsification surgery, IOL implantation and silicone oil removal. Group 2 was subjected to (a) phacoemulsification simultaneously with vitreoretinal surgery and silicone oil tamponade and (b) silicone oil removal from the vitreous cavity. Both groups had their tear liquid samples examined before the surgery and on the 2 nd day after the 1 st phase. Results . Group 2 revealed a 2 to 2.5 times higher concentration of IL-8, MCP-1 and ICAM-1 as compared to Group 1. Conclusion . Increased concentrations of IL-8, MCP-1, and ICAM-1 in the tear after phacoemulsification surgery and IOL implantation coupled with vitreoretinal surgery as compared to vitreoretinal surgery alone requires additional research of the role played by the inflammatory component in the pathogenesis of postsurgical complications in advanced PDR patients.

Antifouling coatings are critical in preventing the surface of sea vessels being heavily fouled by bio-organisms. In this work, we attached biocidal moieties (Isobornyl methacrylate, IBOMA) to the side chains of the polyacrylic polymer to form the antifouling polymer (AFP). Then, the hydrophilic polysiloxane (HP) was prepared through the polyaddition of polyethylene glycol (PEG) and alkoxysilane onto the main chain of the hydrogen silicone oil. Finally, the hydrophilic fouling release coatings (FRCs) were formed by the reaction or winding of antifouling polymer and HP polymer with an interpenetrating polymer network (IPN) method (IPN-FRCs). The effects of the content of AFP and HP on the adhesion, surface roughness, and antifouling performance of the applied coatings on substrate are thoroughly studied and revealed in details through different analytic techniques. The IPN-FRCs exhibit high adhesion strength to the substrate, and the surface roughness is greatly reduced when submerged in seawater. Furthermore, the IPN-FRCs have high performance against seawater bio-organisms, such as barnacles, during both in-lab and marine field tests when right polymer ratios were chosen. Thus, the novel FRCs may have great potential to be applied for marine vessels in line with their low-cost in raw materials and high performance of the final products. The silicone-based antifouling polymer coatings show high resistance to the foulants of marine bio-organisms.

Recurrence of inferior retinal detachment, after vitreoretinal surgery and silicone oil tamponade, along with a subretinal strand, presents a challenge for surgeons. Vitrectomy and retinotomy are the usual treatment in such cases. Here, we present a new transscleral method for addressing this problem. A 13-year-old boy with recurrent retinal detachment after silicone oil tamponade underwent scleral buckling surgery and had a transscleral subretinal strand removed without retinotomy. The retina reattached, and silicone oil was removed 3 months later. The best-corrected visual acuity was 0.4 in decimal vision at 1 year after silicone oil removal. Scleral buckling surgery combined with subretinal strand removal may be used as an alternative to retinotomy, especially for patients with an inferior retinal detachment and local subretinal strand formation.

Brass is widely used in machinery, electronic appliances and emerging industries. The corrosion resistance of laser-induced superhydrophobic surface of brass needs to be improved. In recent years, bionic surface with slippery coating has attracted much attention because of its excellent corrosion inhibition performance. Here, we first prepared the superhydrophobic surface of brass by nanosecond laser ablation combined with fluoroalkyl silane modification, and then injected silicone oil into the prepared superhydrophobic matrix to obtain a slippery coating surface. PDP and EIS tests in 3.5 wt.% NaCl solution showed that the corrosion resistance of the slippery surface was better than that of the superhydrophobic surface. This study can play a certain role in promoting the development of metal anticorrosive coating and is of great significance in the preparation of slippery surface by laser induction, and provides a convenient and effective means for metal anticorrosion in the industrial field.

The large volume expansion and self-locking phenomenon of metal hydride particles during hydrogen sorption often leads to a high stress concentration on the walls of a container, which may cause the collapse of the container. In present study, silicone oil was investigated as a glidant for a V-based BCC metal hydride bed to alleviate the stress concentration during hydrogen sorption. The results indicated that the addition of 5 wt% silicone oil slightly reduced the initial hydrogen storage capacity of V40Ti26Cr26Fe8 (particle size: ~325 μm) but improved the absorption reversibility, regardless of the oil viscosity. It was observed that silicone oil formed a thin oil layer of 320~460 nm in thickness on the surface of the V40Ti26Cr26Fe8 particles, which might improve the fluidity of the powder, reduce the self-locking phenomenon and alleviate the stress concentration on the container walls. Consequently, the maximum strain on the surface of the hydrogen storage container decreased by ≥22.5% after adding 5 wt% silicone oil with a viscosity of 1000 cSt.

Smart slippery liquid-infused porous surfaces (SLIPSs) have aroused remarkable attention owing to tremendous application foreground in biomedical instruments and industry. However, challenges still remain in fabricating durable SLIPSs. In this work, a fast and highly efficient self-repairing slippery surface (SPU-60M) was fabricated based on a polyurethane membrane and silicone oil. By introducing a great quantity of reversible disulfide bonds into the polymer backbone and hydrogen bonds in the polymer interchain, this SLIPS material could be quickly repaired in 15 min with 97.8% healing efficiency. Moreover, the self-healing efficiency could be maintained at 42.75% after the 10th cutting-healing cycle. Notably, SPU-60M showed excellent self-repairing ability not only in an ambient environment but also in an underwater environment and at ultralow temperatures. Besides, the icing delay time (DT) of SPU-60M could be prolonged to 1182 s at -15 °C, and the ice adhesion strength was only 10.33 kPa at -30 °C. In addition, SPU-60M had excellent anti-fouling performance with BSA adsorption of 2.41 μg/cm2 and Escherichia coli CFU counts of 41 × 104. These findings provide a facile way to design highly efficient self-repairing SLIPSs with multifunctionality.

Solar radiation can be considered as one of the most suitable energy source to be used for cooking food. It is therefore important to promote advancement in solar cooking systems, in particular as concerns their efficiency and cooking times. In this work, we designed, realized and tested a novel low-cost solar cooker that uses a high-performance light-concentrating Fresnel lens, which is able to concentrate onto a small focal area a large amount of solar radiation. The radiation is then reflected by a mirror towards a cooking surface, where a pot can be located. The cooker has a geometrical concentration ratio of 40.97. In order to characterize the thermal performance of the cooker, we carried out several outdoor tests with a dedicated test setup, using water and silicone oil as absorbing media. Respect to other solar cookers, results show that the proposed cooker is able to reach high temperatures with good efficiency and reduced heating times: 3 kg of water can reach 90 °C in around 30 min, while 3 kg of silicone oil can be taken from 40 to 170 °C in less than one hour.

Objectives: The effects of silicone endotamponade duration on the macula were evaluated in patients with rhegmatogenous retinal detachment. Materials and Methods: Sixty-five eyes of 65 cases with rhegmatogenous retinal detachment that underwent pars plana vitrectomy and silicone endotamponade were included in the study. All cases were classified in three groups according to duration of silicone tamponade: ≤3 months, 3-6 months, and ≥6 months. All cases were evaluated at 1 week, 1 month, and 3 months after silicone injection, just before and at 1 month after silicone removal in terms of intraretinal pathologies in the macula by using spectral-domain optical coherence tomography (SD-OCT). Results: Sixteen (26.6%) of the patients were female and 49 (75.4%) were male. The mean age of the patients was 58.1±12.1 years (18-82); the mean follow-up time was 12.4±4 months (6-20). The mean duration of silicone tamponade was 6.7±2.3 months (2-12). In 26.6% of patients with ellipsoid zone/outer limiting membrane defect, a statistically significant improvement in reflectivity was detected after silicone oil removal (p=0.016). There was a significant increase in central foveal thickness after silicone removal in eyes with duration of silicone more than 3 months (p=0.003 for 3-6 months, p=0.006 for ≥6 months). The prevalence of cystoid macular edema before and after silicone removal was also significantly higher in the eyes with silicone duration of 6 months or longer (p

This study investigates the influence of synthesis conditions of iron(II) oxalate particles on the particle morphology for their utilization in smart materials known as electrorheological (ER) fluids. Particle morphology has a significant impact on the ER behavior of the particles enabling their use in many unique practical applications. In this study, fifteen various iron(II) oxalate particles differing in synthesis conditions were prepared, out of which four variations were selected for an in depth investigation due to their promising morphology. The influence of synthesis conditions on the morphology of the resulted particles was evaluated by scanning electron microscopy analysis. An X-ray diffraction analysis was employed to confirm the dominant FeC2O4 · H2O phase presented in the synthesized particles. The ER suspensions consisted of the selected four iron(II) oxalate particles dispersed in silicone oil. An optical microscope and a rheometer, both operating under external electric field, enabled a precise and accurate investigation of the structure, the ER performance. Visual observation was used to evaluate the sedimentation stability of the suspension.

To compare between the effect of early (3 months) and late (6 months) silicone removal on the electroretinogram records. Thirty-four eyes with complex primary rhegmatogenous macula off retinal detachment undergone vitrectomy. Silicone oil was removed after 3 months in group I and after 6 months in group II. Scotopic and photopic ERGs, pattern electroretinogram (PERG) and multifocal ERG (mfERG) and best-corrected visual acuity (BCVA) were recorded for all eyes Preoperative mean best corrected visual acuity (BCVA) measured was 0.93 ± 0.05 in group I and 0.9 ± 0.08 in group II. One month after silicone removal, mean BCVA was 0.20 ± 0.04 and 0.18 ± 0.02 in groups I and II respectively. Before silicone oil removal the electroretinographic a- and b-waves were greatly reduced in both groups with no significant difference between them. One month after removal of silicone oil, the electroretinographic a- and b-waves increased in both groups with no significant difference between the two groups (p = 0.46 and 0.23 respectively). The amplitudes of the ERGs increase after removal of silicone oil tamponade with no difference between early (3 months) and late (6 months) removal.

Objective. To present the clinical and functional results of combined treatment of the complications of long-term silicone oil tamponade in a patient with retinopathy of premature. Materials and methods. A 24-year-old patient diagnosed with stage 4b retinopathy of premature in a single seeing right eye. Between 2011 and 2020 underwent 5 microinvasive revisions of the vitreous cavity with replacement of silicone oil and median duration of silicone oil tamponade of 19+25.5 months over this entire period. Because of the constant migration of emulsified silicone oil to anterior chamber due to weakness of iridolenticular ligaments, band keratopathy developed in the right eye, opacity of the IOL due to the adhesion of precipitates on its anterior and posterior surfaces, pupillary membrane, and aggravation of the proliferative membrane on the ocular surface. UCVA was proectio incerta and IOP was 17 mmHg. The median thickness of the cornea was 853 μm, the average thickness of the corneal calcifications is 57 μm. The patient underwent revision of the vitreous cavity with removal of the pupillary membrane, the next steps were to install bandage sutures in the anterior chamber parallel to iris in two mutually perpendicular surfaces to create additional barriers to silicone oil migration. Then we used 27 mg of K3-EDTA to produce 0.1% chelating solution and to remove corneal calcium deposits. Final stage was YAG – laser discision of precipitates from the IOL surfaces. Results. Postoperatively UCVA of the right eye in 1-month was 0.05, IOP was 17 mmHg and endothelial cell density was 1200 cells / mm2. According to OCT data the median corneal thickness was 640 μm, the thickness of the epithelial layer was 39 μm. Biomicroscopically, cornea was transparent, a single silicone oil vesicle in the lower segment of anterior chamver, the bandage sutures are consistent, the IOL is centered with a transparent optical zone, silicone oil visualized on the fundus, epi- and subretinal proliferates were delimited by laser coagulates, epiretinal membrane was in the macular region. Key words: retinopathy of prematurity, silicone oil, emulsification, ribbon-like keratopathy, bandage threads, EDTA.

Purpose: To investigate changes in the retinal layer thickness in rhegmatogenous retinal detachment (RRD) and intraocular foreign body (IOFB) patients undergoing successful pars plana vitrectomy (PPV) with silicone oil tamponade. Methods: This retrospective study included 28 eyes of 28 patients (RRD: 24 patients; IOFB: 4 patients) that were successfully repaired with PPV with silicone oil tamponade. The thickness measurements of the total retina, retinal nerve fiber layer (RNFL), and ganglion cell-inner plexiform layer (GC-IPL) were performed with swept-source optical coherence tomography in nine Early Treatment Diabetic Retinopathy Study subfields, using the wide three-dimensional mode before and after silicone oil tamponade removal. The measurements were compared and differences were analyzed with respect to normal fellow eyes. Results: The RNFL and GC-IPL thickness measurements decreased remarkably as the silicone oil tamponade period progressed, compared with the thickness of the total retinal layer. The average thicknesses of the total retina, RNFL, and GC-IPL were significantly greater in eyes in which the silicone oil had been removed than in those in which the silicone oil remained. Conclusions: Silicone oil tamponade can change the thickness of the retina layer. The longer the silicone oil is tamponaded, the more significant the reduction in thickness of the inner retinal layer.

The inferior mechanical properties and the difficulty in repairing damaged substrates and lubricant films of slippery liquid-infused porous surfaces significantly hampered their practical applications. To solve this problem, we fabricated a polysiloxane-polyurea slippery elastomer with lubricant self-replenishing and matrix self-healing properties by encapsulating silicone oil into the thermoplastic elastomers. By optimizing the chemical compositions and molecular interactions, the obtained slippery elastomer exhibits unique mechanical properties with a maximum breaking strength of 0.12 MPa, elongation of 1600%, and self-healing efficiency of 98%. Moreover, the lubricant stored in the capsule of the slippery elastomer can be controlled released under mechanical stimulation, further realizing surfaces' self-lubricating and liquid manipulation switching between slippery and pinning states. Furthermore, the textile-reinforced slippery elastomer with superior mechanical strength also exhibited liquid repellency, anti-biofouling, and drag reduction properties. Therefore, this textile-reinforced omniphobic surface with high mechanical property, matrix self-healing, and lubricant self-replenishing property shows a broad application prospect in surface protection, underwater antifouling, and drag reduction.

Zirconium oxide (ZrO2) nanoparticles were synthesized and used as additives to prepare silicone oil-based nanofluids. The stability issues associated with the nanofluid are overcome by using oleic acid (OA) as a dispersant. Thermal conductivity and viscosity measurements were carried out at temperature range (25–45 °C). Thermal conductivity of ZrO2/silicone oil nanofluid shows nonlinear behaviour with increasing concentration of ZrO2 nanoparticles. Viscosity measurements showed 31.1% enhancement for 0.1 volume fraction of ZrO2 in OA incorporated ZrO2 nanofluid. The thermal conductivity and viscosity increment of OA incorporated ZrO2/silicone oil nanofluid predict it for cutting fluid applications.

With the help of double hydrogen bonds between urea groups, a self-healing anti-icing coating was prepared from polydimethylsiloxane (PDMS)-based polyurea (PDMSPU) that was synthesized from bis(3-aminopropyl)-terminated PDMS and 2,4-toluene diisocyanate. Furthermore, by incorporating a lubricant of inert silicone oil and the cross-linking agent of 1,3,5-tris-(4-aminophenoxy)benzene (TAPOB), the anti-icing coatings exhibited elastic, slippery and durable properties. The wettability, ice shear strength, abrasion-resistance, mechanical and self-healing properties of the prepared anti-icing coatings were systematically investigated. Results showed that the ice shear strength of the PDMSPU anti-icing coating with 150 wt% silicone oil was 7.9±2.9 kPa, significantly lower than that of pristine PDMSPU (74.7±7.2 kPa). The additional introduction of 2 wt% TAPOB could effectively counteract the adverse effect of the lubricant so that the tensile strength (∼1 MPa) of the coating could be comparable to pristine PDMSPU (855±96 kPa). The PDMSPU coating containing 150 wt% silicone oil and 2 wt% TAPOB could maintain the ice shear strength below 50 kPa against 10 icing/deicing cycles and at 12.0±3.3 kPa after 5000 abrasion cycles, and exhibit self-healing properties after treating at 60°C for 10 or 15 h. The slippery self-healing PDMSPU anti-icing coatings could be suitable for anti-icing surfaces in low temperature environments.

A reduction in the corneal endothelial cells multitude after anterior pole intervention is well established in numerous researches, but there are few articles that follow the impact of vitreoretinal interventions on the cornea, especially when endotamponade agents are used. The assessment of the endothelial corneal cells is needed since it facilitates the personal evaluation of the functional endothelial stock. Specular microscopy investigation offers a scale of the functional strength of the endothelium of cornea, which is vital before all intraocular interventions. Endotamponade agents are very suitable and important tools in the surgical treatment of retinal detachment, but their use must be differentiated depending on the uniqueness of each patient. This research shows corneal endothelial damages caused by intraocular tamponade agents of different types in the case of pars plana vitrectomy for cases of multitude retinal detachments. The purpose of the research was to determine the changes that appear in the endothelium of the cornea and to deal with the results when different tamponade agents are used in the surgical cure for retinal detachment. Specular endothelial corneal microscopy records were achieved and the modifications of the following parameters revealed corneal implication: mean endothelial cell densities, average cell area, coefficient of variation, hexagonality and corneal center thickness. On the first day and at three months postoperatively, a statistically significant reduction was observed for the CV, MCD, and HEX parameters (p 0.001), but no statistically significant difference of the two endotamponade agents (for MCD, p=0.15; for CV, p=0.63; for HEX, p=0.93) was noticed. AVG parameter had a statistically significant decrease (p 0.001) and there was also a statistically significant difference of the two endotamponade agents (p=0.03), patients with gas tamponade presenting a superior result. On the first day and at three months postoperatively, the corneal center thickness presented a statistically significant increase (p 0.001) and there was a statistically significant difference between the two endotamponade agents (p=0.03), patients with gas endotamponade presenting a superior result. In conclusion, using the intraocular tamponade agents helps reestablish the functional-anatomical recovery of the retina after surgery, but their special indication must be well-established for each case of retinal detachment.

© The Author(s) 2021.Electrorheological (ER) fluids generate mechanical responses to applied electric field strength via changing their rheological properties from liquid to solid and vice-versa reversibly. As a result of this, ER fluids can be used in the industrial vibration damping systems. In order to increase applicability of ER fluids, it is necessary to understand electric field induced polarization and ER mechanism of different materials. Therefore, the aim of this study is to illuminate ER and vibration damping properties of polyanthracene (PAT), which is a new material for ER studies. PAT was synthesized from anthracene and characterized by several techniques namely: ATR-FTIR spectroscopy, particle size, SEM image, four-point probe conductivity, and magnetic susceptibility measurements. A series of PAT/silicone oil (SO) dispersions having various concentrations were prepared and subjected to dielectric and ER tests. Then, the colloidal stabilities of 20% PAT/SO and 20% PAT/SO/TritonX systems were determined. Dynamic viscoelastic data obtained by the oscillation tests showed that viscous behavior was dominant under zero electric field, whereas elastic behavior was prevailing under external electric field strength and highlighting the vibration damping characteristics of PAT/SO dispersion. In the creep-recovery measurements, the highest %recovery was recorded to be 62% indicating potential industrial use of PAT/SO dispersion.

We are presenting the non-aqueous emulsions comprising of liquid crystal 8CB (4′-Octyl-4-biphenylcarbonitrile) and silicone oil in varying ratios (5:95, 10:90, 25:75 and 50:50 wt./wt.%). Emulsions ...

Inspired by Nepenthes pitcher plants, slippery liquid-infused porous surfaces (SLIPSs) have attracted wide attention and exhibited remarkable liquid repellency, droplet motion control and antifouling properties. However, lubricant-impregnated surfaces have poor durability, leading to loss of control of the movements of droplets during applications. Herein, WO3-based slippery coatings with high stability were prepared by the spray method and photocatalytic reaction. Notably, on the basis of the hierarchical structures, the strong intermolecular forces between the polydimethylsiloxane brush and silicone oil led to the formation of a stable lubricant layer on the WO3-based slippery coating, which can suppress lubricant loss during water collection. After a series of stability tests, such as high-speed centrifugation, long-term storage, acidic solution and multiple heating/cooling cycles, the biomimetic slippery surface still displays excellent surface-slippery stability. Furthermore, the slippery surface exhibits superior water mist capture, water droplet expansion and harvested water removal abilities, leading to good water collection performance. The silicone oil content in the collected water was 28 mg/L, demonstrating that the loss of oil was lower during the water collection process. Even under harsh environments, including multiple heating/cooling cycles, long-term storage and high shear force, lubricant-impregnated coatings can also maintain good water collection efficiency. Therefore, these slippery coatings are promising for widespread application.

AIM: To observe whether silicone oil (SO) tamponade could decrease macular perfusion after retinal detachment repair. METHODS: A prospective observational case-control study. Patients diagnosed with primary macular off rhegmatogenous retinal detachment undergoing successful retinal repair surgery with vitrectomy were strictly selected. Optical coherence tomography angiography findings were compared between SO and air tamponade groups. Two postoperative visiting points were set (1 and 3mo). RESULTS: Totally 29 patients (29 eyes) were enrolled. Twenty cases had SO tamponade while 9 cases were with air tamponade. At the first visiting point, superficial parafoveal vessel density (PFSVD) significantly decreased in the SO group (P=0.0403), especially in the superior quadrant or superior-hemi area (P=0.0089, 0.0426, respectively). Parafoveal deep vessel density (PFDVD) had no difference between the two groups. At the second visiting point, all quadrants of PFSVD reduced significantly in the SO group (P=0.0256, 0.0001, 0.0031