Search

With fast advances in enhancing the focusing/imaging resolution of Fresnel zone plate lenses toward sub-10 nm, low diffraction efficiency in connection with their rectangular zone shape still remains a big issue in both soft and hard X-ray microscopy. In hard X-ray optics, encouraging progress has recently been reported in our earlier attempts of high focusing efficiency by 3D kinoform shaped metallic zone plates, formed by greyscale electron beam lithography. This paper addresses our efforts towards high focusing/imaging efficiency by developing a novel dielectric kinoform zone plate lens for soft X-rays. The effects of the zone materials and zone shapes on the focusing/imaging quality were first theoretically investigated by a modified thin-grating-approximation method, revealing superior efficiencies of dielectric kinoform zone plates over rectangular ones in metals. Optical characterizations of replicated dielectric kinoform zone plates by greyscale electron beam lithography demonstrate a focusing efficiency of 15.5% with a resolution of 110 nm in the water window of X-rays. Apart from high efficiency, the novel kinoform zone plate lenses developed in this work exhibit significant advantages over conventional zone plates, i.e. simplified process, low cost and no need for a beamstop.

Inserting an ultrathin low-conductivity interlayer between the absorber and transport layer has emerged as an important strategy for reducing surface recombination in the best perovskite solar cells. However, a challenge with this approach is a trade-off between the open-circuit voltage ( V oc ) and the fill factor (FF). Here, we overcame this challenge by introducing a thick (about 100 nanometers) insulator layer with random nanoscale openings. We performed drift-diffusion simulations for cells with this porous insulator contact (PIC) and realized it using a solution process by controlling the growth mode of alumina nanoplates. Leveraging a PIC with an approximately 25% reduced contact area, we achieved an efficiency of up to 25.5% (certified steady-state efficiency 24.7%) in p-i-n devices. The product of V oc × FF was 87.9% of the Shockley-Queisser limit. The surface recombination velocity at the p-type contact was reduced from 64.2 to 9.2 centimeters per second. The bulk recombination lifetime was increased from 1.2 to 6.0 microseconds because of improvements in the perovskite crystallinity. The improved wettability of the perovskite precursor solution allowed us to demonstrate a 23.3% efficient 1-square-centimeter p-i-n cell. We demonstrate here its broad applicability for different p-type contacts and perovskite compositions.

The CDIO (Conceive, Design, Implement and Operate) teaching mode and virtual simulation experiment platform of professional courses were established, four kinds of simulation experiments were designed, from easy to difficult, through the integration of production and education and the coordination of virtual and reality. The engineering project adopts top-down modular disassembly. Modular building blocks are built from bottom to top in the course, and the connection between modules is completed step by step, from point to surface and from surface to body to complete the engineering design and realize the whole process of CDIO engineering. Through the implementation of integrated teaching process, students can expand free design, stimulate innovative thinking, and integrate professional knowledge systematically with the relevance of engineering projects, which provides a certain support for engineering education.

The first transition-metal-free catalyst for the stereospecific polymerization of 1,3-butadiene.

Endogenous spermidine can improve the resistance of plants to saline-alkali stress. SlSPDS1 and SlSPDS2 are the main spermidine synthase (SPDS) genes in tomatoes. In comparison with SlSPDS1, SlSPDS2 plays an important role in wild-type tomato seedling under saline-alkali stress. However, limited research has focused on the role of SlSPDS2 in saline-alkali stress. Wild-type (WT) and SPDS gene (SlSPDS2) transgenic over-expression tomato seedlings were used to explore the function of endogenous spermidine on the saline-alkali resistance of tomato seedlings. The results show that SlSPDS2 overexpression under normal conditions and saline-alkali stress increased the content of endogenous free polyamines and the expression levels of polyamine synthesis-related genes in tomato seedlings. Under saline-alkali stress, SlSPDS2 overexpression significantly reduced Na

Previous studies found that 5-aminolevulinic acid (ALA) and abscisic acid (ABA) can mitigate damage from adversity by enhancing photosynthesis. However, it is not clear whether they have positive effects on iron utilization and chlorophyll synthesis of tomato seedlings under low-temperature stress. To investigate the possible functional relationship between ABA and ALA and elucidate the possible mechanisms of action of ALA to alleviate low-temperature stress in tomato seedlings, this experiment analyzed the effects of ALA and ABA on chlorophyll synthesis in tomato seedling leaves sprayed with exogenous of ALA (25 mg·L−1) or ABA (100 µM) under low-temperature stress (8–18 °C/8–12 °C, day/night). The results show that exogenous ALA increased the Fv/Fm of tomato leaves by 5.31% and increased the accumulation of iron and chlorophyll by 101.15% and 15.18%, respectively, compared to the low-temperature treatment alone, and tomato resistance of low-temperature stress was enhanced. Meanwhile, exogenous application of ALA increased the ABA content by 39.43%, and subsequent application of exogenous ABA revealed that tomato seedlings showed similar effects to exogenous ALA under low-temperature stress, with increased accumulation of iron and chlorophyll in tomato seedlings, which eventually increased the maximum photochemical efficiency of PS II. Under low-temperature stress, application of exogenous ABA significantly reduced ALA content, but the expression of key enzyme genes (PPGD, HEMB1, HEME1, and HEMF1), precursors of chlorophyll synthesis by ALA, was significantly elevated, presumably because the increased activity of these enzymes after external application of ABA accelerated ALA consumption. In conclusion, ABA may crosstalk with ALA to improve the photochemical efficiency and low temperature resistance of tomatoes by regulating chlorophyll synthesis and iron accumulation.

Treedepth decomposition has several practical applications and can be used to speed up many parameterized algorithms. There are several works aiming to design a scalable algorithm to compute exact treedepth decompositions. Those include works based on a set of all minimal separators. In those algorithms, although a number of minimal separators are enumerated, the minimal separators that are used for an optimal solution are empirically very small. Therefore, analyzing the upper bound on the size of minimal separators is an important problem because it has the potential to significantly reduce the computation time. A minimal separator $S$ is called an optimal top separator if $td(G) = |S| + td(G \backslash S)$, where $td(G)$ denotes the treedepth of $G$. Then, we have two theoretical results on the size of optimal top separators. (1) For any $G$, there is an optimal top separator $S$ such that $|S| \le 2tw(G)$, where $tw(G)$ is the treewidth of $G$. (2) For any $c < 2$, there exists a graph $G$ such that any optimal top separator $S$ of $G$ have $|S| > c \cdot tw(G)$, i.e., the first result gives a tight bound on the size of an optimal top separator., The major changes from the first version are as follows. (1) The conjecture was resolved and the upper bound was slightly improved. (2) The experimental results were not correct and were removed. Specifically, there was a problem in the separator enumeration when we extended SMS [Korhonen 2020]. In some inputs, none of the optimal top separators were computed even if the upper bound was relaxed

An online automatic feedback system has been successfully installed and commissioned at the BL08U1A Soft X-ray Spectromicroscopy Beamline of Shanghai Synchrotron Radiation Facility, which can monitor the incident X-ray beam in real time by measuring the blade-edge signals of the exit slit and automatically adjust the elliptical cylindrical mirror parameters to achieve beam calibration and maintain the optimal X-ray flux of the sample. This work provides a comprehensive description of the hardware composition, system implementation, feedback logic, function and software design, system optimization and commission, as well as the online experimental results supported by the system. The experimental results demonstrated that the online automatic feedback system is capable of effectively maintaining the optimal X-ray beam flux for X-ray absorption spectroscopy experiments. Its success can provide valuable technique assistance for the design, construction and optimization of similar systems at various beamlines in synchrotron sources in the future.

The objective of the study was to explore the role of SDC1 in breast cancer cells. Our study also investigated the regulatory relationship between SDC1 and the microRNA (miRNA) miR-335-5p as well as the impact of these two genes on the progression of breast cancer. Bioinformatic approaches were employed to analyze the differentially expressed messenger RNAs (mRNAs) and miRNAs (DE-mRNAs and DE-miRNAs) in breast cancer tissue. Then mRNA SC1 was obtained. Differentially downregulated mRNAs were intersected with target miRNAs predicted by databases, and miR-335-5p was determined as the study object. Quantitative reverse transcription polymerase chain reaction was applied to assess the expressions of SDC1 and miR-335-5p in each cell line. Next, Western blot assay was conducted to detect the protein level of SDC1 and dual-luciferase assay was performed to verify the binding relationship between miR-335-5p and SDC1. Finally, we conducted methyl thiazolyl tetrazolium (MTT), colony formation, and Transwell assays and flow cytometry to further investigate the impacts of SDC1 and miR-335-5p on the progression of breast cancer. SDC1 was significantly highly expressed while miR-335-5p was remarkably lowly expressed in human breast cancer. Silencing SDC1 in breast cancer blocked the proliferation, migration and invasion of the cells. In breast cancer, SDC1 was a target gene of miR-335-5p and silencing miR-335-5p notably increased SDC1 expression. Compared with the silence of miR-335-5p, simultaneous silences of miR-335-5p and SDC1 significantly reduced the proliferative, migratory and invasive abilities of breast cancer cells. The result revealed the interaction between miR-335-5p and SDC1 in the progression of breast cancer, which may contribute to the treatments for this cancer.

The skin serves as a physical barrier and an immunological interface that protects the body from the external environment

Vitiligo is the most common human skin depigmenting disorder. It is mediated by endogenous autoreactive CD8 + T cells that destruct skin melanocytes. This disease has an estimated prevalence of 1% of the global population and currently has no cure. Animal models are indispensable tools for understanding vitiligo pathogenesis and for developing new therapies. Here, we describe a vitiligo mouse model which recapitulates key clinical features of vitiligo, including epidermis depigmentation, CD8 + T cell infiltration in skin, and melanocyte loss. To activate endogenous autoreactive cytotoxic CD8 + T cells targeting melanocytes, this model relies on transient inoculation of B16F10 melanoma cells and depletion of CD4 + regulatory T cells. At cellular level, epidermal CD8 + T cell infiltration and melanocyte loss start as early as Day 19 after treatment. Visually apparent epidermis depigmentation occurs 2 months later. This protocol can efficiently induce vitiligo in any C57BL/6 background mouse strain, using only commercially available reagents. This enables researchers to carry out in-depth in vivo vitiligo studies utilizing mouse genetics tools, and provides a powerful platform for drug discovery.

In order to study the influencing factors of friction coefficient in an M-B model, based on the basic model of fractal theory, the distribution function and probability distribution density of the micro-convex body truncation area are derived by using mathematical and statistical means, and a new model of critical truncation area and friction coefficient in fractal surface contact process are proposed. Considering the differences between the actual contact area and the truncated area during plastic deformation of the micro-convex body, a correction factor is introduced. Focusing on the mechanism of the elastic-plastic transition phase, and finally a friction coefficient model based on the fractal dimension, the normal force and correction factor is derived. Finally, the friction coefficient of fractal surface is simulated and verified by taking nickel as an example, and it is proved that the new model is correct in predicting the change trend of friction coefficient in the M-B model.

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive’s outer surface is 238.3 °C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.

A defining pathological feature of human lung fibrosis is localized tissue heterogeneity, which challenges the interpretation of transcriptomic studies that typically lose spatial information. Here we investigate spatial gene expression in diagnostic tissue using digital profiling technology. We identify distinct, region-specific gene expression signatures as well as shared gene signatures. By integration with single-cell data, we spatially map the cellular composition within and distant from the fibrotic niche, demonstrating discrete changes in homeostatic and pathologic cell populations even in morphologically preserved lung, while through ligand-receptor analysis, we investigate cellular cross-talk within the fibrotic niche. We confirm findings through bioinformatic, tissue, and in vitro analyses, identifying that loss of NFKB inhibitor zeta in alveolar epithelial cells dysregulates the TGFβ/IL-6 signaling axis, which may impair homeostatic responses to environmental stress. Thus, spatially resolved deconvolution advances understanding of cell composition and microenvironment in human lung fibrogenesis.

Developing biomarkers for accurately predicting the efficacy of immune checkpoint inhibitor (ICI) therapies is conducive to avoiding unwanted side effects and economic burden. At the moment, the quantification of programmed cell death ligand 1 (PD-L1) in tumor tissues is clinically used as one of the combined diagnostic assays of response to anti-PD-1/PD-L1 therapy. However, the current assays for evaluating PD-L1 remain imperfect. Recent studies are promoting the methodologies of PD-L1 evaluation from rough to precise. Standardization of PD-L1 immunohistochemistry tests is being promoted by using optimized reagents, platforms, and cutoff values. Combining novel in vivo probes with PET or SPECT will probably be of benefit to map the spatio-temporal heterogeneity of PD-L1 expression. The dynamic change of PD-L1 in the circulatory system can also be realized by liquid biopsy. Consider PD-L1 expressed on non-tumor (immune and non-immune) cells, and optimized combination detection indexes are further improving the accuracy of PD-L1 in predicting the efficacy of ICIs. The combinations of artificial intelligence with novel technologies are conducive to the intelligence of PD-L1 as a predictive biomarker. In this review, we will provide an overview of the recent progress in this rapidly growing area and discuss the clinical and technical challenges.

As a unique coherent diffraction imaging method, X-ray ptychography has an ultrahigh resolution of several nanometers for extended samples. However, ptychography is often degraded by various noises that are mixed with diffracted signals on the detector. Some of the noises can transform into periodic artifacts (PAs) in reconstructed images, which is a basic problem in raster-scan ptychography. Herein, we propose a novel periodic-artifact suppressing algorithm (PASA) and present a new understanding of PAs or raster-grid pathology generation mechanisms, which include static intensity (SI) as an important cause of PAs. The PASA employs a gradient descent scheme to iteratively separate the SI pattern from original datasets and a probe support constraint applied in the object update. Both simulative and experimental data reconstructions demonstrated the effectiveness of the new algorithm in suppressing PAs and improving ptychography resolution and indicated a better performance of the PASA method in PA removal compared to other mainstream algorithms. In the meantime, we provided a complete description of SI conception and its key role in PA generation. The present work enhances the feasibility of raster-scan ptychography and could inspire new thoughts for dealing with various noises in ptychography.

X-ray ptychography is a popular variant of coherent diffraction imaging that offers ultrahigh resolution for extended samples. In x-ray ptychography instruments, the Fresnel zone-plate (FZP) is the most commonly used optical probe system for both soft x-ray and hard x-ray. In FZP-based ptychography with a highly curved defocus probe wavefront, the reconstructed image quality can be significantly impacted by the initial probe function form, necessitating the construction of a suitable initial probe for successful reconstruction. To investigate the effects of initial probe forms on FZP-based ptychography reconstruction, we constructed four single-mode initial probe models (IPMs) and three multi-mode IPMs in this study, and systematically compared their corresponding simulated and experimental reconstructions. The results show that the Fresnel IPM, spherical IPM, and Fresnel-based multi-mode IPMs can result in successful reconstructions for both near-focus and defocus cases, while random IPMs and constant IPMs work only for near-focus cases. Consequently, for FZP-based ptychography, the elaborately constructed IPMs that closely resemble real probes in wavefront phase form are more advantageous than natural IPMs such as the random or constant model. Furthermore, these IPMs with high phase similarity to the high-curvature large-sized probe adopted in experiments can help greatly improve ptychography experiment efficiency and decrease radiation damage to samples.

X-ray microscope as an important nanoprobing tool plays a prevailing role in nano-inspections of materials. Despite the fast advances of high resolution focusing/imaging reported, the efficiency of existing high-resolution zone plates is mostly around 5% in soft x-ray and rapidly goes down to 1%–2% when the resolution approaches 10 nm. It is well known that the rectangular zone shape, beamstop, limited height/width ratios, material absorption of light and structural defects are likely responsible for the limited efficiency. Although zone plates with Kinoform profile are supposed to be efficient, progress for achieving both high resolution (5%) have hardly been addressed in soft x-ray. In this work, we propose a compound Kinoform/Fresnel zone plate (CKZP) by combing a dielectric Kinoform zone plate with a 15 nm resolution zone plate. Greyscale electron beam lithography was applied to form the 3D Kinoform zone plate and atomic layer deposition was carried out to form the binary zone plate. Optical characterizations demonstrated 15 nm resolution focusing/imaging with over 7.8% efficiency in soft x-ray. The origin of the efficiency improvement behind the proposed compound lens is theoretically analyzed and discussed.

The study tested the function of exogenous spermine (Spm) in resisting salinity–alkalinity stress in tomato seedlings and found that tomato Spm synthase gene (SlSPMS) was involved in this regulation. The tomato seedlings cultivated in normal conditions or salinity–alkalinity conditions were irrigated with 100 ml one strength Hoagland nutrient solution 100 ml mixed solution (5 ml 300 mmol/L NaCl, 45 ml 300 mmol/L Na2SO4, 45 ml 300 mmol/L NaHCO3, and 5 ml 300 mmol/L Na2CO3 (pH = 8.90)) every 2 days, respectively. The 0.5 mM Spm pretreatment improved superoxide dismutase (SOD; EC 1.15.1.1) activity, catalase (CAT; EC 1.11.1.6) activity, ascorbate peroxidase (APX; EC 1.11.1.11) activity, and glutathione reductase (GR; EC 1.6.4.2) activity and decreased endogenous hydrogen peroxide (H2O2) content, malondialdehyde (MDA) content, and relative electrical conductivity (REC) in tomato leaves. Na+ content declined and K+ concentration rose in tomato seedlings when pre-treated with Spm. However the results showed that under salinity–alkalinity stress, silencing of SlSPMS with virus-induced gene silencing had lower antioxidant enzyme activities and higher Na+ content and lower K+ content than normal tomato seedlings, meaning that they had low salinity–alkalinity tolerance. Exogenous Spm could not reconstruct the tolerance to salinity–alkalinity stress in SlSPMS gene-silencing tomato seedlings. Taken together, exogenous Spm could induce the expression level of SlSPMS, which regulated the antioxidant enzyme system and ion homeostasis in tomato seedlings living in salinity–alkalinity environment, thereby improving the ability of tomato seedlings to resist salinity–alkalinity stress.

This paper proposed a new contact model that describes the contact state and pressure distribution change in tangential stiffness softening. First, the accuracy of three modeling methods is evaluated. Then, on the basis of the smooth model, the contact state is studied, and an elliptical boundary model is proposed. Thirdly, the influence of the main parameters, preload and friction coefficient, on stiffness degradation is studied. Finally, the contact pressure distribution model under tangential load is proposed. The research content can be better applied to the stiffness degradation modeling of bolted structures.

Lonicera japonica(honeysuckle) is one of the most important medicinal plants and widely utilized in traditional Chinese medicine. At present, there are many varieties of honeysuckle used in cultivation, among which Sijihua variety are widely cultivated due to its wide adaptability, stress resistance, early flowering and high yield. In this study, we assembled the genome of Sijihua, which was approximately 886.04 Mb in size with a scaffold N50 of 79.5 Mb. 93.28% of the total assembled sequences were anchored to 9 pseudo-chromosomes by using PacBio long reads and Hi-C sequencing data. We predicted 39,320 protein-coding genes and 92.87% of them could be annotated in NR, GO, KOG, KEGG and other databases. In addition, we identified 644 tRNAs, 2,156 rRNAs, 109 miRNAs and 5,502 pseudogenes from the genome. The chromosome-scale genome of Sijihua will be a significant resource for understanding the genetic basis of high stress-resistance, which will facilitate further study of the genetic diversity and accelerate the genetic improvement and breeding ofL. japonica.

X-ray microscope as an important nanoprobing tool is expected to play a powerful role in nano-inspections of materials. Despite the fast advances of high resolution focusing/imaging reported, the diffraction efficiency of existing binary zone plates as the lenses in the microscope is mostly around 5% in practice and rapidly goes down to 1-2% when the resolution approaches 10 nm, failing its applications in advanced scientific research. Zone plates with Kinoform profile are supposed to be high efficient, little progress for achieving both high resolution and high efficiency has been reported. The conflict between the resolution and the efficiency in X ray optics has become a long-lasting bottleneck in the further development of X-ray microscope. Based on our earlier success in developing high efficiency Kinoform zone plates by greyscale electron beam lithography, we proposed, in this work, a new zone plate structure by combing a dielectric Kinoform zone plate with an atomic layer deposited HfO2 zone plate to achieve high resolution focusing/imaging with high efficiency. Beam propagation method was applied in designing and optimizing Kinoform shapes of the zones, greyscale and/or binary electron beam lithography was carried out for generating both 3D Kinoform as well as rectangular zones with aspect ratio of 23/1 in dielectric resist, and finally high-quality atomic layer deposition of HfO2 was conducted to form the 15-nm wide outermost zone. Optical characterizations by an in-house developed soft X ray microscope demonstrated 15-nm resolution focusing/imaging with over 7% efficiency, which is the highest with such a resolution as far as our awareness. The origin of such an improvement behind the proposed novel lenses is interpreted by our BMP calculation results and the comparisons with existing performances by other reports in literature was discussed.

Tuning the anionic redox chemistry (O2− → O2n−) activity and reversibility by crystal and/or electronic modulation is essential for Li-rich oxide cathode materials. Herein, we report a facile strategy to improve the activity and reversibility of both anionic and cationic redox by integrating oxygen vacancies and the spinel phase. The initial specific capacity (216.1 mA h g−1vs. 316.3 mA h g−1), coulombic efficiency (80% vs. 94.8%), long-term cycling stability (1000 cycles at 5C) and voltage decay have all been greatly improved due to the largely suppressed irreversible oxygen release. The underlying modulation mechanism has been unraveled. Firstly, the introduction of oxygen vacancies decreases the covalency of TM–O and the density of states of the O 2p band, which mitigates the irreversible oxygen release during oxygen redox. Secondly, the spinel phase integration induced by oxygen vacancies not only improves the Li-ion conductivity and the rate capability due to its 3D Li+ channel and the expanded Li layer but also enhances the structural stability. Thirdly, the first-principles calculations indicate that the increase of delocalized electrons around the transition metal also intensifies the MnO6 octahedral distortion and the inactive Mn-ions are partially activated during the first cycle and participate in the charge compensation. This study sheds some new light on designing high-performance Li-rich layered oxide cathode materials by regulating the anionic and cationic redox with the incorporation of oxygen vacancies and the spinel phase.

Organics separation for purifying and recycling environment-detrimental solvents is essential to sustainable chemical industries. Covalent organic framework (COF) membranes hold great promise in affording precise and fast organics separation. Nonetheless, how to well coordinate facile processing—high crystalline structure—high separation performance remains a critical issue and a grand challenging. Herein, we propose a concept of heterocrystalline membrane which comprises high-crystalline regions and low-crystalline regions. The heterocrystalline COF membranes are fabricated by a two-step procedure, i.e., dark reaction for the construction of high-crystalline regions followed by photo reaction for the construction of low-crystalline regions, thus linking the high-crystalline regions tightly and flexibly, blocking the defect in high-crystalline regions. Accordingly, the COF membrane exhibits sharp molecular sieving properties with unprecedented organic solvent permeance up to 44-times higher than the state-of-the-art membranes.

Background: PM exposure can lead to myocardial hypertrophy, with a potential contribution via DNA methylation. Myocardial lipotoxicity is closely related to myocardial hypertrophy. But, myocardial lipotoxicity caused by PM has not been reported. PDGFRβ, a platelet-derived growth factor receptor, is also essential for normal cardiovascular development. However, It is unclear the role of PM-induced PDGFRβ methylation in myocardial hypertrophy and myocardial lipotoxicity. We investigated the effect of PDGFRβ methylation induced by PM on myocardial hypertrophy and myocardial lipotoxicity. Results: PDGFRβ methylation caused by PM decreased PDGFRβ mRNA and protein expression in C57BL/6J mouse hearts. Thus inhibiting gene expression in its downstream pathway, ultimately leading to cardiac hypertrophy. Disturbances of myocardial lipid metabolism caused by PM in AC16 cells and C57BL/6J mouse hearts were also observed. High expression of PDGFRβ in neonatal rat primary cardiomyocytes was found to activate its downstream pathway and ameliorate the effects of PM-induced cardiac hypertrophic activity. At the same time, adenovirus was used to induce high expression of PDGFRβ in C57BL/6J mice. It was found that PDGFRβ not only improved PM-induced cardiac hypertrophy, but also alleviated PM-induced myocardial lipotoxicity. Conclusions: PDGFRβ gene methylation may be one of the potential biomarkers of myocardial hypertrophy induced by PM exposure. And high expression of PDGFRβ may be a potential way to prevent myocardial hypertrophy and cardiac lipid metabolism disorder caused by PM exposure in mice.

Saline-alkaline stress inhibits plant growth and reduces yield. Abscisic acid (ABA) is an important plant hormone in response to plant stress. However, the role of ABA under saline-alkaline stress is poorly understood. Therefore, the mechanisms of ABA accumulation and resistance improvement in tomato seedlings were studied under saline-alkaline stress. We investigated whether ABA accumulation improved the saline-alkaline stress resistance ability of tomato. Here, wild-type (Solanum lycopersicum cv. Ailsa Craig) and ABA-deficient mutant (notabilis) seedlings were used to determine the membrane lipid peroxidation, osmotic substance and chlorophyll contents. ABA synthesis and signal transduction changes and ABA roles regulating the antioxidation in tomato seedlings subject to saline-alkaline stress were further explored. Results showed that ABA synthesis and signal transduction were induced by saline-alkaline stress. Under saline-alkaline stress, tomato seedlings had decreased relative water content, increased relative electrical conductivity and malondialdehyde content, and these changes were alleviated by exogenous ABA treatment. Exogenous ABA alleviated the degradation of chlorophyll in the leaves of tomato seedlings caused by saline-alkaline stress, further promoted the accumulation of proline and soluble sugar, reduced the content of ROS and improved the ability of the antioxidant enzyme system. Moreover, notabilis appeared to be sensitive to saline-alkaline stress. Overall, ABA is involved in the resistance of tomato seedlings to saline-alkaline stress, and exogenous ABA improves the saline-alkaline tolerance of tomato seedlings.

Improving the reversibility of oxygen redox is quite significant for layered oxides cathodes in sodium-ion batteries. Herein, we for the first time simultaneously tune bulk O

The mechanical properties of silicone foam will degrade when exposed to environmental loads such as temperature and pressure for a long time. In recent years, the variation law of the stress–strain response of silicone foam during the aging process has received more and more attention, but there are few works that quantitatively analyze the variation of the stress–strain response. In this work, we quantitatively analyzed the variation law of the stress–strain response of silicone foam during aging by the constitutive model. Firstly, the accelerated aging test of silicone rubber foam under long-term compressive strain was carried out, and its compression set, stress relaxation and strain stress curves of different aging degrees were obtained. Further, degenerate trajectory equations for the compression set and stress–relaxation were obtained. In addition, the hyper-foam constitutive model was obtained by fitting stress–strain curves, and the changes in the model parameters after aging were studied. The results show that the compressed set and stress–relaxation are exponential functions of time, while different to existing research findings, we found that the stress–strain curves do not change monotonically with increasing time, which first softens, then hardens, and finally softens. Additionally, to better understand the changing trend of the stress–strain response, the correlation between the stress–strain curve and the compression set and stress–relaxation was discussed qualitatively. Finally, in the stage of monotonic change of the stress–strain curve, the exponential function of the model parameters with the increase of aging time was obtained.

The prevalence of pulmonary fibrosis is increasing with an aging population and its burden is likely to increase following COVID-19, with large financial and medical implications. As approved therapies in pulmonary fibrosis only slow disease progression, there is a significant unmet medical need. Hyperbaric oxygen (HBO) is the inhaling of pure oxygen, under the pressure of greater than one atmosphere absolute, and it has been reported to improve pulmonary function in patients with pulmonary fibrosis. Our recent study suggested that repetitive HBO exposure may affect biological processes in mice lungs such as response to wounding and extracellular matrix. To extend these findings, a bleomycin-induced pulmonary fibrosis mouse model was used to evaluate the effect of repetitive HBO exposure on pulmonary fibrosis. Building on our previous findings, we provide evidence that HBO exposure attenuates bleomycin-induced pulmonary fibrosis in mice. In vitro, HBO exposure could reverse, at least partially, transforming growth factor (TGF)-β–induced fibroblast activation, and this effect may be mediated by downregulating TGF-β–induced expression of hypoxia inducible factor (HIF)-1α. These findings support HBO as a potentially life-changing therapy for patients with pulmonary fibrosis, although further research is needed to fully evaluate this.

Cellulose nanofibrils (CNF) is a suitable functional material as its lightweight, huge availability and biodegradable advantages. A direct-evaporation method was employed to prepare the CNF nanopapers with or without Fe3O4 and TiO2 nanoparticles (NPs) in the form of films, which is more facile and efficient in comparison with the methods of vacuum-filtration and cast drying. A combination of three-dimensional (3D) focal stacks and dual-energy imaging method was firstly used to characterize the CNF nanopapers embedded with Fe3O4 and TiO2 NPs, where the locations of the NPs can be clearly and exactly distinguished. Furthermore, the thickness, transparency, magnetism and tensile properties of the CNF nanopapers were characterized. This work shows a facile method for the preparation of CNF nanopapers with or without addition. More importantly, the combination of focal stacks and dual-energy imaging method offers a superior means of characterizing the spatial structures and 3D elemental visualization.

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing. Keywords: Decoupling, Dynamic response, Oblique wing aircraft, Sliding mode control, Wing skewing process

A new alcohol-soluble AIE-active quaternary ammonium salt PTN-Br was prepared and developed as the cathode interfacial layer (CIL) between the Ag electrode and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) in p–i–n perovskite solar cells (PVSCs). Excitingly, the device showed a reduced work function (WF) of the commonly used Ag electrode, improved cathode interfacial contact, accelerated electron transport mobility and suppressed interfacial recombination, directly leading to a champion power conversion efficiency (PCE) of 17.44%, which exceeded that of the reference device without PTN-Br as the CIL (15.14%). Also, thanks to the absorption of PTN-Br in the UV region, the PTN-Br-based PVSCs showed superior UV stability, maintaining 72.2% of the original PCE, to the control device which maintained only 36.8% of the initial PCE after UV irradiation for 12 h.