52 results on '"Xu, Jinyang"'
Search Results
2. Cold spray processing of AA2024/Al2O3 coating on magnesium AZ31B alloy: Process parameters optimization, microstructure and adhesive strength performance of coating
3. Parametric study in pool boiling enhancement with self-induced jet impingement on sandblasted pin-fin surfaces using R1336mzz(Z)
4. Behavior recognition of cage-free multi-broilers based on spatiotemporal feature learning
5. Study on thermal damage formation mechanisms and surface integrity in creep-feed profile grinding of superalloys
6. Improved flow boiling performance and temperature uniformity in counter-flow interconnected microchannel heat sink
7. Experimental investigation on self-induced jet impingement boiling using R1336mzz(Z)
8. Enhancing tensile properties of pulsed CMT–MIG welded high strength AA2014-T6 alloy joints: Effect of post weld heat treatment
9. Experimental and parametric study in pool boiling enhancement with self-induced jet impingement on the microporous copper surface using R1336mzz(Z)
10. Effect of surface textures fabricated by two-dimensional ultrasonic vibration-assisted milling on the key surface properties of dental ceramics
11. Experimental study on flow boiling characteristics of R-1233zd(E) of counter-flow interconnected minichannel heat sink
12. Wear behavior of different coated tools in MQL-assisted milling of magnesium-based rare-earth alloys
13. A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites
14. Milling machinability analysis of GW63K rare-earth magnesium alloys based on the concept of clean cutting
15. Automatic quantification and assessment of grouped pig movement using the XGBoost and YOLOv5s models
16. A review on CFRP drilling: fundamental mechanisms, damage issues, and approaches toward high-quality drilling
17. A critical review addressing conventional twist drilling mechanisms and quality of CFRP/Ti stacks
18. A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites
19. Biomimetic microtextured surfaces to improve tribological and antibacterial behaviors of 3Y-TZP ceramics
20. A critical review on sintering and mechanical processing of 3Y-TZP ceramics
21. Experimental study of drilling behaviors and damage issues for woven GFRP composites using special drills
22. On crack suppression mechanisms of ultrasonic elliptical vibration cutting of 3Y-TZP ceramics
23. Machinability analysis in high-speed milling of AlSi7Mg alloys under EMQL conditions: An approach toward sustainable manufacturing
24. A critical review addressing drilling-induced damage of CFRP composites
25. Research on the lying pattern of grouped pigs using unsupervised clustering and deep learning
26. Automatic scoring of postures in grouped pigs using depth image and CNN-SVM
27. Improving wettability, antibacterial and tribological behaviors of zirconia ceramics through surface texturing
28. Investigation of material removal mechanisms and ductile-brittle transition zone of zirconia ceramics sintered at various temperatures
29. Nano-scale mechanical behaviors and material removal mechanisms of zirconia ceramics sintered at various temperatures
30. Co-immobilization of N-hydroxyphthalimide and cobaltous ions as a recyclable catalyst for selective aerobic oxidation of toluene to benzaldehyde
31. Bubble dynamics and pressure oscillation in highly subcooled water jet array impingement boiling under periodical heat flux
32. Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations
33. Analysis of cutting responses of Sialon ceramic tools in high-speed milling of FGH96 superalloys
34. Wear mechanisms and effects of monolithic Sialon ceramic tools in side milling of superalloy FGH96
35. Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills
36. On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies
37. Finite element modeling of high-speed milling 7050-T7451 alloys
38. Effects of Different Cooling Methods on the Specific Energy Consumption when Drilling CFRP/Ti6Al4V Stacks
39. Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling
40. Study of drilling-induced defects for CFRP composites using new criteria
41. Selective hydrogenolysis of glycerol to 1,3-propanediol over Pt-WOx/SAPO-34 catalysts
42. Study on the Frictional Heat at Tool-Work Interface when Drilling CFRP Composites
43. Wear characteristics of polycrystalline diamond tools in orthogonal cutting of CFRP/Ti stacks
44. Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks
45. Experimental Studies on the Cutting Characteristics of Hybrid CFRP/Ti Stacks
46. Numerical Modeling and FE Analysis of CFRP/Ti Stack Orthogonal Cutting
47. Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review
48. Corrigendum to “A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites” [Compos B: Eng 254 (2023) 110589]
49. A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP
50. Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.