42 results on '"a356"'
Search Results
2. Development of A356-TiB2 In-Situ Nanocomposite Brake Disc via Intensive High Shear Mixing and Vertical Centrifugal Casting Techniques
3. Estimating toughness limit of cast aluminum alloys with Reduced Pressure Test
4. Solidification and Strength Behavior of A356 Al Alloy Wheels
5. Evaluation of Fe Content on the Fluidity of A356 Aluminum Alloy by New Fluidity Index
6. Optimization Process to Develop Tungsten Carbide Reinforced with Aluminium MMCs Using Surface Plots and ANN
7. Experimental estimation and numerical comparison of fatigue strength of A356/SiCP composite in T6 condition
8. Metallurgical and mechanical study of T6 heat-treated SiC particle-reinforced A356-aluminium matrix composite
9. Experimental Analysis Using Taguchi Optimization Technique on Wear Properties of AL-356 Alloy MMC Reinforced with SiC
10. Development of Fe–Cr Slag mold for Al–Si Alloy (A356) Casting
11. An Analytical Approach for the Correlation Between Bifilm Index and Tensile Properties of AlSi7Mg0.3 (A356) Aluminum Alloy Cleaned via Rotary Degassing and Different Fluxes
12. Development of A356 Alloy Green Sand Mold Casting Process Using Narmada Riverbed Sand in India: Design of Experiment and Optimization
13. Effects of Heating Temperature and Holding Time on Microstructure and Mechanical Properties of Thixoforged A356 Aluminum Alloy Parts
14. Tribo Mechanical Study on Aluminium A356 Reinforced Metal Matrix Composites Casted with Copper Chill
15. Feasibility Study of Stone-Dust as an Alternative Material to Silica Sand for Al–Si (A356) Alloy Casting
16. Assessment of Mechanical and Tribological Characteristics of A356 Reinforced with x wt% CaB6 Composites
17. Heat Transfer Coefficient Determination in a Gravity Die Casting Process with Local Air Gap Formation and Contact Pressure Using Experimental Evaluation and Numerical Simulation
18. Tribological Study on Effect of Chill Casting on Aluminium A356 Reinforced with Hematite Paticulated Composites
19. Quality Index Assessment of Multi-Pass Friction Stir Processed Al–Si–Mg Alloys Fully Produced by Recycling of Machining Chips
20. Evaluation of Fracture Mechanisms in Al-Si Metal Matrix Nanocomposites Produced by Three Methods of Gravity Sand Casting, Squeeze Casting and Compo Casting in Semi-Solid State
21. Influence of Die Temperature Control on Solidification and the Casting Process
22. Cooling Behavior of A356 Alloy in Surfactant Quenching Medium
23. Effect of pouring and cooling temperatures on microstructures and mechanical properties of as-cast and T6 treated A356 alloy
24. Microstructure and Properties of A356 Alloy Wheels Fabricated by Low-Pressure Die Casting with Local Squeeze
25. Microstructural Changes in Hypoeutectic Al–Si Alloys by Low Shear and Vibration Induced Melt Conditioning Setup
26. Change in Porosity of A356 by Holding Time and Its Effect on Mechanical Properties
27. On the Interpretation of Melt Quality Assessment of A356 Aluminum Alloy by the Reduced Pressure Test: The Bifilm Index and Its Physical Meaning
28. Corrosion Behavior of B and Ti Grain-Refined Sr-Modified A356
29. Incorporation of Silicon Carbide and Alumina Particles into the Melt of A356 via Electroless Metallic Coating Followed by Stir Casting
30. Influence of heat treatment on corrosion rate of aluminium A356 reinforced with mica and titanium di oxide
31. Experimental optimisation of the tribological behaviour of Al/SiC/Gr hybrid composites based on Taguchi’s method and artificial neural network
32. Influence of Different Cross Sections on Fluidity Characteristics of A356
33. Grain Refiner Effect on the Microstructure and Mechanical Properties of the A356 Automotive Wheels
34. Mathematical Modeling of Microshrinkage Formation During Solidification of A356 Castings
35. Optimization of semi-solid metal processing of A356 aluminum alloy
36. Grain and dendrite refinement of A356 alloy with Al–Ti–C–RE master alloy
37. Effects of the Delay Between Quenching and Aging on Hardness and Tensile Properties of A356 Aluminum Alloy
38. Characteristics of A356/SiCp and A390/SiCp composites
39. Solid freeform fabrication of aluminum alloy components: Numerical simulations
40. Improvement of mechanical properties of AL (A356) cast alloy processed by ECAP with different heat treatments
41. Computer-aided cooling curve analysis of A356 aluminum alloy
42. Effect of Duplex Ageing on the Properties of A356 Alloy Containing Rare Earth Elements
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.