464 results on '"rolling"'
Search Results
2. Microstructure and Mechanical Properties of Ultra-Light and High-Strength Mg-xLi-3Al-2Zn-0.2Y Alloy Produced by Warm Rolling Coupled Annealing Processes
3. Light-driven Self-sustained Rolling of Cylinder Hydrogels with Fast and Anisotropic Responses
4. Effect of Rolling and Artificial Aging Treatment on the Microstructure and Mechanical Properties of a 2195 Al–Li Alloy by Ultrasonic Casting
5. Microstructural Evolution, Mechanical Property, and Strengthening in a Lightweight Mg-Y-Zn-Mn Alloy Fabricated by Multidirectional Forging and Hot Rolling
6. Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing
7. Composition Optimization of Al-Mg-Mn Alloys for Continuous Casting-Direct Rolling and Influence of Er and Zr on Their Microstructure and Mechanical Properties
8. Method for the automated design of cross-rolled preforms
9. Finishing and Hardening of Cycloidal Helical Surfaces by Surface Plastic Deformation with Programmed Tool Control
10. Comparative analysis of the effect of magnesium and zinc on the structure and mechanical properties of hot-rolled and cold-rolled alloy Al–2%Cu–1.5%Mn sheets
11. Effects of Intermediate Rolling on the Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloys
12. The influence of cold rolling and hydroxyapatite coating on the mechanostructure, corrosion resistance, cell viability, and antibacterial activity of ZnCu biodegradable implants
13. Characterization of Temperature-Dependent Behavior in Hot Rolled EN8 Steel
14. Ultrahigh strength and improved electrical conductivity in an aging strengthened copper alloy processed by combination of equal channel angular pressing and thermomechanical treatment
15. Surface and subsurface material modifications and graded material properties in sheet steel 1.0338 (DC04) and their influence on forming processes
16. Influence of Plastic Deformation and Hydroxyapatite Coating on Structure, Mechanical, Corrosion, Antibacterial and Cell Viability Properties of Zinc Based Biodegradable Alloys
17. Recent progress in the research on magnesium and magnesium alloy foils: A short review
18. Effect of Heat Treatment on the Structure and Mechanical Properties of Ti–10Nb–(1–3)Mo Alloys
19. Influence of Cold Rolling on the Microstructure and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy
20. Tibiofemoral Slip Velocity in Total Knee Arthroplasty is Design-Invariant but Activity-Dependent
21. Influence of Deformation Modes on the Accuracy of Seamless Pipes
22. Slipping and rolling on a rough accelerating surface
23. Study on Microstructure and Fatigue Properties of A473M Stainless Steel Strengthened by Surface Rolling
24. Influence of Annealing Temperature on Microstructure Parameters and Microhardness of Tantalum After Deformation by Rolling
25. Effects of Cold Rolling on the Microstructure and Mechanical Properties of High-Zn-Content Al-Zn-Mg-Sc Alloys
26. Friction in Rolling a Cylinder on or Under a Viscoelastic Substrate with Adhesion
27. Experimental investigation on slip conditions during thread rolling with flat dies
28. Microstructure and Texture of Ultra-High Purity Copper under Changed Rolling Strain Paths and Subsequent Recrystallization Annealing
29. Determination of Deformation Resistance during Rolling
30. Accurate prediction algorithm of rolling force in slab gradient temperature rolling process
31. Developing Zn–1.5Mg Alloy with Simultaneous Improved Strength, Ductility and Suitable Biodegradability by Rolling at Room Temperature
32. Effects of Annealing Treatment on Mechanical and Damping Properties of ZK60 Magnesium Alloy Sheets
33. A review on the effect of various rolling regimes (cryo, cold, warm, hot) and post-annealing on high-entropy alloys: microstructure evolution, deformation mechanisms, and mechanical properties
34. Ensuring the Quality of Taper Pipe Threads Rolled in Pipes with the Control of Kinematic Technological Connections
35. Characterization and Analysis of Post-Shift Behavior of Central Metallic Layer During AZ31 Mg Alloy Flat Rolling
36. Effect of Processing Parameters on the Phase Transformation of a High Temperature Copper-Based Shape Memory Alloy
37. Effect of Aging and Rolling on Microstructure and Mechanical Properties of AA7075/TaC Composites
38. Research progress of nanolubrication for rolling process
39. Effect of Rolling on the Electrochemical Corrosion Behavior of Spray Deposited Al-6Si Alloys with Different Pb Content
40. Peculiarities of Formation of High-Carbon Steel Structure During Rolling
41. Justification of the Production Technology Efficiency for High-Strength, Low-Alloy Steels with Improved Properties and Quality at Low Cost. Part 3. Production of Rolled Products from Transitional Slabs
42. Effects of Rolling-Cryogenic Process on Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Sheets
43. Rotor-to-Stator Friction Simulation with Nonconstant Stiffness of the Contact Surfaces and Small Clearance between Them
44. The effects of central cross-section diameters of rollers on doubly curved surface rolling
45. Effect of Rolling Deformation on Microstructure and Mechanical Properties of As-Cast and Rolled ZM21 Magnesium Alloy
46. Influence of Deformation Temperature on the Formation of Contacts in Titanium Powder Ribbons Produced by Symmetric and Asymmetric Rolling
47. Manufacturing of Ultrafine-Grained Copper via Rolling and Cooling-Assisted Friction Stir Processing: Effect of Traverse Speed
48. Effect of Direction of Additional Rolling on Anisotropy of Microstructure, Mechanical and Electrical Properties of Sheet Aluminum Alloy AA7075
49. Characterizations of the Microstructure and Texture of 321 Austenitic Stainless Steel After Cryo-Rolling and Annealing Treatments
50. Effect of Rolling Process on Formability and Mechanical Properties of AA 1050/Mg AZ31B Bilayer Sheet
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.