Search

Chip-scale microspectrometers, operational across the visible to long-wave infrared spectral region will enable many remote sensing spectroscopy applications in a variety of fields including consumer electronics, process control in manufacturing, as well as environmental and agricultural monitoring. The low weight and small device footprint of such spectrometers could allow for integration into handheld, unattended vehicles or wearable-electronics based systems. This review will focus on recent developments in nanophotonic microspectrometer designs, which fall into two design categories: (i) planar filter-arrays used in conjunction with visible or IR detector arrays and (ii) microspectrometers using filter-free detector designs with tailored responsivities, where spectral filtering and photocurrent generation occur within the same nanostructure.

Spectroscopy is a cornerstone in the field of optics. Conventional spectrometers generally require two elements. The first provides wavelength selectivity, for example, diffraction grating or Michelson interferometer. The second is a detector (or detector array). Many applications would benefit from very small and lightweight spectrometers. This motivates us to investigate what may be regarded as an ultimate level of miniaturization for a spectrometer, in which it consists solely of a detector array. We demonstrate a chip containing 24 pixels, each comprising a silicon nanowire (Si NW) array photodetector formed above a planar photodetector. The NWs are structurally colored, enabling us to engineer the responsivity spectra of all photodetectors in the chip. Each pixel thus combines wavelength selectivity and photodetection functions. We demonstrate the use of our chip to reconstruct the spectrum of an unknown light source impinging upon it. This is achieved by an algorithm that takes as its inputs the measured photocurrents from the pixels and a library of their responsivity spectra.

The realization of on-chip microspectrometers would allow spectroscopy and colorimetry measurement systems to be readily incorporated into platforms for which size and weight are critical, such as consumer grade electronics, smartphones, and unmanned aerial vehicles. This would allow them to find use in diverse fields such as interior design, agriculture, and in machine vision applications. All spectrometers require a detector or detector array and optical elements for spectral discrimination. A single device that combines both detection and spectral discrimination functions therefore represents an ultimate limit of miniaturization. Motivated by this, we here experimentally demonstrate a novel nanostructured silicon-based photodetector design whose responsivity can be tailored by an appropriate choice of geometric parameters. We utilize a unique doping profile with two vertically stacked, back-to-back photodiode regions, which allows us to double the number of detectors in a given on-chip footprint. By patterning the top photosensitive regions of each device with two sets of interleaved vertical slab waveguide arrays of varied width and period, we define the absorption spectra (and thus responsivity spectra) of both the upper and lower photodiode regions. We then use twenty such “fishnet pixels” to form a microspectrometer chip and demonstrate the reconstruction of four test spectra using a two-stage supervised machine-learning-based reconstruction algorithm.

We computationally reconstruct short- to long-wave infrared spectra using an array of plasmonic metasurface filters. We illuminate the filter array with an unknown spectrum and measure the optical power transmitted through each filter with an infrared microscope to emulate a filter-detector array system. We then use the recursive least squares method to determine the unknown spectrum. We demonstrate our method with light from a blackbody. We also demonstrate it with spectra generated by passing the light from the blackbody through various materials. Our approach is a step towards miniaturized spectrometers spanning the short- to long-wave infrared based on filter-detector arrays.

Hot charge carrier extraction from metallic nanostructures is a very promising approach for applications in photocatalysis, photovoltaics, and photodetection. One limitation is that many metallic nanostructures support a single plasmon resonance thus restricting the light-to-charge-carrier activity to a spectral band. Here we demonstrate that a monolayer of plasmonic nanoparticles can be assembled on a multistack layered configuration to achieve broadband, near-unit light absorption, which is spatially localized on the nanoparticle layer. We show that this enhanced light absorbance leads to ∼40-fold increases in the photon-to-electron conversion efficiency by the plasmonic nanostructures. We developed a model that successfully captures the essential physics of the plasmonic hot electron charge generation and separation in these structures. This model also allowed us to establish that efficient hot carrier extraction is limited to spectral regions where (i) the photons have energies higher than the Schottky junctions and (ii) the absorption of light is localized on the metal nanoparticles.

The highest resonant transmission through an array of holes perforated in metallic screens occurs when the dielectric constant of the substrate, the superstrate, and the hole are the same. Changes in the refractive index of the homogenous environment also produce the largest shift in resonances per refractive index unit. In this Letter, we first propose and apply a technique in realization of a freestanding bi-periodic array of holes perforated in a silver film. We then show both numerically and experimentally that shifts in (1,0) and (0,1) modes in response to changes in the refractive index of the surrounding dielectric provide a mechanism for realization of a miniaturized tunable quarter-wave plate that operates in an extraordinary optical transmission mode with a high throughput and a near unity state of circularly polarized light.

Metasurface-based holography presents opportunities for applications that include optical displays, data storage, and optical encryption. Holograms that control polarization are sometimes referred to as vectorial holograms. Most studies on this topic have concerned devices that display different images when illuminated with different polarization states. Fewer studies have demonstrated holographic images whose polarization varies spatially, i.e., as a function of the position within the image. Here, we experimentally demonstrate a vectorial hologram that produces an image with a spatially continuous distribution of polarization states, for the first time to our knowledge. An unlimited number of polarization states can be achieved within the image. Furthermore, the holographic image and its polarization map (polarization vs position in image) are independent. The same image can be thus encoded with different polarization maps. As far as we know, our approach is conceptually new. We anticipate that it could broaden the application scope of metasurface holography.