Search

Graphical abstract

A novel modification of the Low Z plasty (NM-Low Z) technique for bilateral sagittal split osteotomy was recently proposed. The osteotomy line was modified more inferiorly than in the conventional Hunsuck–Epker (HE) approach. The NM-Low Z technique enhances the mandibular setback distance and degree of rotation in severe skeletal discrepancies. This study aimed to investigate the biomechanical behavior under simulated forces, and to compare the NM-Low Z and HE techniques on the mandible with Class III skeletal deformity at 1 week, 3 weeks, and 6 weeks post-operation. Physiological muscular and occlusal loads were simulated using the finite element (FE) method. Stresses on the miniplate, screws, and bone were observed and compared between the two models. The elastic strain at the fracture site was observed for the optimal bone-healing capacity. The NM-Low Z model exhibited a lower stress than the HE model at every stage post-operation. Both models demonstrated elastic strains within the normal range for bone healing. In summary, the biomechanical behavior of the NM-Low Z technique is comparable to that of the conventional EH technique. NM-Low Z could facilitate post-operation skeletal stability by reducing the stress on fixation materials during bone healing.

A body armor is vital for users in combat filed. Normally, the body armor have two components: soft and hard ones. This paper proposes feasibility assessment technique to evaluate contemporary materials: Kevlar, natural spider silk, and human hair, for making soft component of the body armor. There are four criteria: technical, economic, legal, and operational feasibilities to generate the feasibility assessment matrix. The optimal material in question is human hair which has highest rank at 82%.

To present a rapid-prototype (RP) endoprosthesis replacement after tumor resection in patients with bone metastasis of the upper extremity. The short-term complications and functional outcomes were evaluated as well as the survival of patients and endoprosthesis. Bone metastasis patients who required bone resection and endoprosthesis replacement were enrolled and consented before operation. Custom-made endoprosthesis was fabricated from polymethyl methacrylate assisted by RP technology. After surgery was performed, patients were followed up daily until discharge and monthly until 6 months postoperatively for immediate post-operative complications and for signs of endoprosthesis failure. The functional outcome was evaluated 6 months postoperatively by the Musculoskeletal Tumor Society score (MTSS) and the Mankin score. Thereafter, patients’ survival and arm condition were monitored every 3 months. Sixteen cases participated on this study. There were nine proximal-, four total- and two distal humerus, and one proximal ulna replacement. The median follow-up period was 486 days. The mean MTSS was 55 % and the Mankin score was good in 64 % and fair in 36 % of the patients. Glenohumeral subluxation was observed in 23 % of the patients; however, a stable shoulder was achieved in all cases. There were no prosthesis failure or systemic breakage. An RP endoprosthesis may have significant advantages when the entire humerus needs to be replaced, or periarticular sites are involved. This technique offers custom-made endoprosthesis with enough durability, and in a relatively short production time at reasonable costs which are suitable for palliative reconstruction.

Tissue engineering is essentially a technique for imitating nature. Natural tissues consist of three components: cells, signalling systems (e.g. growth factors) and extracellular matrix (ECM). The ECM forms a scaffold for its cells. Hence, the engineered tissue construct is an artificial scaffold populated with living cells and signalling molecules. A huge effort has been invested in bone tissue engineering, in which a highly porous scaffold plays a critical role in guiding bone and vascular tissue growth and regeneration in three dimensions. In the last two decades, numerous scaffolding techniques have been developed to fabricate highly interconnective, porous scaffolds for bone tissue engineering applications. This review provides an update on the progress of foaming technology of biomaterials, with a special attention being focused on computer-aided manufacturing (Andrade et al. 2002) techniques. This article starts with a brief introduction of tissue engineering (Bone tissue engineering and scaffolds) and scaffolding materials (Biomaterials used in bone tissue engineering). After a brief reviews on conventional scaffolding techniques (Conventional scaffolding techniques), a number of CAM techniques are reviewed in great detail. For each technique, the structure and mechanical integrity of fabricated scaffolds are discussed in detail. Finally, the advantaged and disadvantage of these techniques are compared (Comparison of scaffolding techniques) and summarised (Summary).

This study aimed to investigate the stainless steel 316L processing by means of selective laser melting (SLM). The processing parameters under consideration included laser power (25-225 W), scanning speed (50-320 mm/s), and scan spacing (0.04 and 0.06 mm). Every processing was constrained the layer thickness as of 100 µm. All parameters were performed based on two experiments, line scanning and multiple layers scanning. Each of final workpieces was examined by visual inspection, density measurement, hardness, and built rate. From the experiments, the optimal processing conditions which produced the smooth tracks were obtained. The workpiece processed by this optimal processing condition presented quality characteristics with 97.6% density and 220±6 HV hardness.

Background: High tibial osteotomy (HTO) is an established treatment for uni-compartmental osteoarthritis with varus deformity in relatively active young patients with good knee mobility. The most important factor for success and low complications of HTO is the precise correction of osteotomy. The objective of this study was to evaluate the accuracy of pre-operative planning of open-wedge HTO using t3D computer-aided design (CAD) weight-bearing simulated guidance technique for the succession of surgery.Materials and methods: Nineteen patients who met the inclusion criteria were recruited between July 2013 and June 2014. 3D CAD weight-bearing simulated guidance technique was obtained from standard anterior–posterior, lateral of hip-to-ankle full leg standing radiographs, and computed tomography (CT) scan provided the weight-bearing corrective axis of preoperative planning and predictive corrective mechanical axis value. Post-operative mechanical axis value was obtained after surgery.Results: This comparative study between the predictive corrective, using 3D CAD weight-bearing simulated guidance technique, and post-operative mechanical axis value, analysed with t-test statistical analysis, showed the insignificant difference (p> 0.05).Conclusion: We conclude that the 3D CAD weight-bearing simulated guidance technique has good accuracy as preoperative planning of open-wedge HTO for succession surgery.