Search

With microstructures that typically favor crystallization at low temperatures, commercial polybutadiene elastomers often suffer from poor toughness and limited elongation when utilized in applications near room temperature. By controlling competition between primary and secondary metathesis through phosphite inhibition of ruthenium catalysts during the ring-opening metathesis polymerization of cyclooctadiene and a bis-norbornene cross-linker, we effectively tune the proportion of cisand transalkenes and the resulting polybutadiene microstructure. With microstructural control, a wide range of room temperature mechanical responses are revealed by simply tuning the phosphite to catalyst ratio. Importantly, toughening due to the presence of crystalline domains initially or those formed in situthrough strain-induced crystallization is possible at room temperature, and polybutadiene elastomers with room temperature elongation at failure greater than 600% are obtained. Further, strain-mediated crystallization allows for storage of strain energy and on-demand actuation upon application of a mild thermal stimulus. Our results suggest a scalable synthetic route to high-toughness polybutadiene elastomers with a single catalytic system and hold promise for enabling excellent toughness in polybutadiene elastomers over a broad temperature range.

In recent decades, more than 100 different mechanophores with a broad range of activation forces have been developed. For various applications of mechanophores in polymer materials, it is crucial to selectively activate the mechanophores with high efficiency, avoiding nonspecific bond scission of the material. In this study, we embedded cyclobutane-based mechanophore cross-linkers (I and II) with varied activation forces (fa) in the first network of the double network hydrogels and quantitively investigated the activation selectivity and efficiency of these mechanophores. Our findings revealed that cross-linker I, with a lower activation force relative to the bonds in the polymer main chain (fa-I/fa-chain= 0.8 nN/3.4 nN), achieved efficient activation with 100% selectivity. Conversely, an increase of the activation force of mechanophore II (fa-II/fa-chain= 2.5 nN/3.4 nN) led to a significant decrease of its activation efficiency, accompanied by a substantial number of nonspecific bond scission events. Furthermore, with the coexistence of two cross-linkers, significantly different activation forces resulted in the almost complete suppression of the higher-force one (i.e., I and III, fa-I/fa-III= 0.8 nN/3.4 nN), while similar activation forces led to simultaneous activations with moderate efficiencies (i.e., I and IV, fa-I/fa-IV= 0.8 nN/1.6 nN). These findings provide insights into the prevention of nonspecific bond rupture during mechanophore activation and enhance our understanding of the damage mechanism within polymer networks when using mechanophores as detectors. Besides, it establishes a principle for combining different mechanophores to design multiple mechanoresponsive functional materials.

Single‐molecule force spectroscopy is a powerful tool for the quantitative investigation of the biophysics, polymer physics and mechanochemistry of individual polymer strands. One limitation of this technique is that the attachment between the tip of the atomic force microscope and the covalent or noncovalent analyte in a given pull is typically not strong enough to sustain the force at which the event of interest occurs, which makes the experiments time‐consuming and inhibits throughput. Here we report a polyelectrolyte handle for single‐molecule force spectroscopy that offers a combination of high (several hundred pN) attachment forces, good (~4%) success in obtaining a high‐force (>200 pN) attachment, a non‐fouling detachment process that allows for repetition, and specific attachment locations along the polymer analyte.

Many virus-like particles (VLPs) have good chemical, thermal, and mechanical stabilities compared to those of other biologics. However, their stability needs to be improved for the commercialization and use in translation of VLP-based materials. We developed an endoskeleton-armored strategy for enhancing VLP stability. Specifically, the VLPs of physalis mottle virus (PhMV) and Qβ were used to demonstrate this concept. We built an internal polymer “backbone” using a maleimide–PEG15–maleimide cross-linker to covalently interlink viral coat proteins inside the capsid cavity, while the native VLPs are held together by only noncovalent bonding between subunits. Endoskeleton-armored VLPs exhibited significantly improved thermal stability (95 °C for 15 min), increased resistance to denaturants (i.e., surfactants, pHs, chemical denaturants, and organic solvents), and enhanced mechanical performance. Single-molecule force spectroscopy demonstrated a 6-fold increase in rupture distance and a 1.9-fold increase in rupture force of endoskeleton-armored PhMV. Overall, this endoskeleton-armored strategy provides more opportunities for the development and applications of materials.

Energy modeling underpins the design and deployment of net-zero energy systems. However, many net-zero energy solutions, such as bioenergy and battery storage, are not fully sustainable, and energy models do not adequately account for their sustainability side effects. Here, we identify the scale and scope of challenges and opportunities in consolidating sustainability impacts into net-zero transitions through modeling.

The spiropyran mechanophore (SP) is employed as a reporter of molecular tension in a wide range of polymer matrices, but the influence of surrounding environment on the force-coupled kinetics of its ring opening has not been quantified. Here, we report single-molecule force spectroscopy studies of SP ring opening in five solvents that span normalized Reichardt solvent polarity factors (ETN) of 0.1–0.59. Individual multimechanophore polymers were activated under increasing tension at constant 300 nm s–1displacement in an atomic force microscope. The extension results in a plateau in the force–extension curve, whose midpoint occurs at a transition force f* that corresponds to the force required to increase the rate constant of SP activation to approximately 30 s–1. More polar solvents lead to mechanochemical reactions that are easier to trigger; f* decreases across the series of solvents, from a high of 415 ± 13 pN in toluene to a low of 234 ± 9 pN in n-butanol. The trend in mechanochemical reactivity is consistent with the developing zwitterionic character on going from SP to the ring-opened merocyanine product. The force dependence of the rate constant (Δx‡) was calculated for all solvent cases and found to increase with ETN, which is interpreted to reflect a shift in the transition state to a later and more productlike position. The inferred shift in the transition state position is consistent with a double-well (two-step) reaction potential energy surface, in which the second step is rate determining, and the intermediate is more polar than the product.

Polymers that amplify a transient external stimulus into changes in their morphology, physical state, or properties continue to be desirable targets for a range of applications. Here, we report a polymer comprising an acid-sensitive, hydrolytically unstable enol ether backbone onto which is embedded gem-dichlorocyclopropane (gDCC) mechanophores through a single postsynthetic modification. The gDCC mechanophore releases HCl in response to large forces of tension along the polymer backbone, and the acid subsequently catalyzes polymer deconstruction at the enol ether sites. Pulsed sonication of a 61 kDa PDHF with 77% gDCC on the backbone in THF with 100 mM H2O for 10 min triggers the subsequent degradation of the polymer to a final molecular weight of less than 3 kDa after 24 h of standing, whereas controls lacking either the gDCC or the enol ether reach final molecular weights of 38 and 27 kDa, respectively. The process of sonication, along with the presence of water and the existence of gDCC on the backbone, significantly accelerates the rate of polymer chain deconstruction. Both acid generation and the resulting triggered polymer deconstruction are translated to bulk, cross-linked polymer networks. Networks formed via thiol–ene cross-linking and subjected to unconstrained quasi-static uniaxial compression dissolve on time scales that are at least 3 times faster than controls where the mechanophore is not covalently coupled to the network. We anticipate that this concept can be extended to other acid-sensitive polymer networks for the stress-responsive deconstruction of gels and solvent-free elastomers.

Four unsaturated poly(carbooligosilane)s (P1–P4) were prepared via acyclic diene metathesis polycondensation of new oligosilane diene monomers (1–4). These novel polymers with varying main-chain Si incorporation have high transinternal olefin stereochemistry (ca. 80%) and molecular weights (9500–21,700 g mol–1). Postpolymerization epoxidation converted all alkene moieties to epoxides and rendered the polymers (P5–P8) more electrophilic, which allowed for single-molecule force spectroscopy studies via a modified atomic force microscope setup with a silicon tip and cantilever. The single-chain elasticity of the polycarbooligosilanes decreased with increasing numbers of Si–Si bonds, a finding reproduced by quantum chemical calculations.

We have analyzed the rate of C(sp2)–C(sp2) reductive elimination from nickel(II) bis(2,4,6-trifluorophenyl) complexes (P–P)Ni(2,4,6-C6H2F3)2containing either MeOBiPhep (3a) or a macrocyclic bisphosphine ligand (3b–3e) as a function of force applied to the biaryl backbone of these ligands through intramolecular tension generated by a molecular force probe. Nickel complexes 3were isolated in 22–60% yield from the reaction of bisphosphine with the bis(tetrahydrofuranyl) complex (THF)2Ni(2,4,6-C6H2F3)2followed by chromatography. Thermolysis of complexes 3in C6D6at 68 °C leads to first-order decay through >3 half-lives to the form 2,2′,4,4′,6,6′-hexafluorobiphenyl as the exclusive fluorine-containing product in ≥93% yield. Whereas compressive forces up to −65 pN have no significant effect on the rate of reductive elimination, extension forces increase the rate of reductive elimination by a factor of 3 over an ∼230 pN range of restoring forces relative to the strain-free MeOBiphep complex. The rate response of reductive elimination from nickel(II) bis(trifluorophenyl) complexes as a function of extension force is similar to the previously reported 2.8-fold increase in the rate of reductive elimination from platinum diaryl complexes (P–P)Pt(4-C6H4NMe2)2over the same range of forces.

We present a modified Lake–Thomas theory that accounts for the molecular details of network connectivity upon crack propagation in polymer networks. This theory includes not only the energy stored in the breaking network strands (bridging strands) but also the energy stored in the tree-like structure of the strands connecting the bridging strands to the network continuum, which remains intact as the crack propagates. The energy stored in each of the generations of this tree depends nonmonotonically on the generation index due to the nonlinear elasticity of the stretched network strands. Further, the energy required to break a single bridging strand is not necessarily dominated by the energy stored in the bridging strand itself but in the higher generations of the tree. We describe the effect of mechanophores with stored length on the energy stored in the tree-like structure. In comparison with the “strong” mechanophores that can only be activated in the bridging strand, “weak” mechanophores that can be activated both in the bridging strand and in other generations could provide more energy dissipation due to their larger contribution to higher generations of the tree.

Over the past 20 years, the field of polymer mechanochemistry has amassed a toolbox of mechanophores that translate mechanical energy into a variety of functional responses ranging from color change to small-molecule release. These productive chemical changes typically occur at the length scale of a few covalent bonds (Å) but require large energy inputs and strains on the micro-to-macro scale in order to achieve even low levels of mechanophore activation. The minimal activation hinders the translation of the available chemical responses into materials and device applications. The mechanophore activation challenge inspires core questions at yet another length scale of chemical control, namely: What are the molecular-scale features of a polymeric material that determine the extent of mechanophore activation? Further, how do we marry advances in the chemistry of polymer networks with the chemistry of mechanophores to create stress-responsive materials that are well suited for an intended application? In this Perspective, we speculate as to the potential match between covalent polymer mechanochemistry and recent advances in polymer network chemistry, specifically, topologically controlled networks and the hierarchical material responses enabled by multi-network architectures and mechanically interlocked polymers. Both fundamental and applied opportunities unique to the union of these two fields are discussed.

Recent work has demonstrated that force-triggered mechanochemical reactions within a polymeric material are capable of inducing measurable changes in macroscopic material properties, but examples of bulk property changes without irreversible changes in shape or structure are rare. Here, we report a double-network hydrogel that undergoes order-of-magnitude increases in acidity when strained, while recovering its initial shape after large deformation. The enabling mechanophore design is a 2-methoxy-gem-dichlorocyclopropane mechanoacid that is gated within a fused methyl methoxycyclobutene carboxylate mechanophore structure. This gated mechanoacid is incorporated viaradical co-polymerization into linear and network polymers. Sonication experiments confirm the mechanical release of HCl, and single-molecule force spectroscopy reveals enhanced single-molecular toughness in the covalent strand. These mechanochemical functions are incorporated into a double-network hydrogel, leading to mechanically robust and thermally stable materials that undergo strain-triggered acid release. Both quasi-static stretching and high strain rate uniaxial compression result in substantial acidification of the hydrogel, from pH ∼ 7 to ∼5.

We report the mechanochemical reactivity of the highly strained pentacyclic hydrocarbon cubane. The mechanical reactivity of cubane is explored for three regioisomers with 1,2-, 1,3-, and 1,4-substituted pulling attachments. Whereas all compounds can be activated thermally, mechanical activation is observed via pulsed ultrasonication of cubane-containing polymers only when force is applied via 1,2-attachment. The single observed product of the force-coupled reaction is a thermally inaccessible syn-tricyclooctadiene, in contrast to cyclooctatetraene (observed thermally) or a pair of cyclobutadienes that would result from sequential cyclobutane scission. We further quantify the mechanochemical reactivity of cubane by single molecule force spectroscopy, and force-coupled rate constants for ring opening reach ∼33 s–1at a force of ∼1.55 nN, lower than forces of 1.8–2.0 nN that are typical of conventional cyclobutanes.

Plant virus-like particles (VLPs) are biocompatible, non-infectious nanomaterials with promising applications as immunotherapeutics and vaccines. However, slow-release VLP formulations are needed to achieve long-term efficacy without repeated administration. VLP hydrogels allow the encapsulation and sustained delivery of VLPs, but the particles must covalently bind the hydrogel polymers to avoid premature loss. This has been achieved so far by in situVLP polymerization, which requires high viral concentrations (5–10 mg/mL, 0.5–1 wt%) to form stable hybrid VLP–hydrogel networks and this complicates scalability and clinical translation. Here, we developed a novel swell-and-click method that led to successful VLP scaffold formation regardless of the viral load used. As a result, VLP-functionalized hydrogels were fabricated with viral concentrations as low as 0.1–1 mg/mL (0.01–0.1 % wt%) without compromising the scaffold stability on the process. The hydrogels incorporate VLPs during swelling, followed by copper-free click chemistry reactions that bind the particles covalently to the polymer. The swell-and-click method also resulted in more than a two-fold enhancement in VLP uptake into the hydrogels and it provides a means of combined burst release and prolonged sustained release, desired traits for cancer immunotherapy treatment. The present work introduces a novel methodology for the design of VLP-based hydrogels, which could facilitate the scalability of the fabrication process and move a significant step forward towards clinical translation of long-term VLP vaccination in cancer disease.

The intermolecular interactions of noble gases in biological systems are associated with numerous biochemical responses, including apoptosis, inflammation, anesthesia, analgesia, and neuroprotection. The molecular modes of action underlying these responses are largely unknown. This is in large part due to the limited experimental techniques to study protein–gas interactions. The few techniques that are amenable to such studies are relatively low-throughput and require large amounts of purified proteins. Thus, they do not enable the large-scale analyses that are useful for protein target discovery. Here, we report the application of stability of proteins from rates of oxidation (SPROX) and limited proteolysis (LiP) methodologies to detect protein–xenon interactions on the proteomic scale using protein folding stability measurements. Over 5000 methionine-containing peptides and over 5000 semi-tryptic peptides, mapping to ∼1500 and ∼950 proteins, respectively, in the yeast proteome, were assayed for Xe-interacting activity using the SPROX and LiP techniques. The SPROX and LiP analyses identified 31 and 60 Xe-interacting proteins, respectively, none of which were previously known to bind Xe. A bioinformatics analysis of the proteomic results revealed that these Xe-interacting proteins were enriched in those involved in ATP-driven processes. A fraction of the protein targets that were identified are tied to previously established modes of action related to xenon’s anesthetic and organoprotective properties. These results enrich our knowledge and understanding of biologically relevant xenon interactions. The sample preparation protocols and analytical methodologies developed here for xenon are also generally applicable to the discovery of a wide range of other protein–gas interactions in complex biological mixtures, such as cell lysates.

Recent research on the mechanochemistry of metallocene mechanophores has shed light on the force-responsiveness of these thermally and chemically stable organometallic compounds. In this work, we report a combination of experimental and computational studies on the mechanochemistry of main-chain cobaltocenium-containing polymers. Ester derivatives of the cationic cobaltocenium, though isoelectronic to neutral ferrocene, are unstable in the nonmechanical control experimental conditions that were accommodated by their ferrocene analogs. Replacing the electron withdrawing C-ester linkages with electron-donating C-alkyls conferred the necessary stability and enabled the mechanochemistry of the cobaltocenium to be assessed. Despite their high bond dissociation energy, cobaltocenium mechanophores are found to be selective sites of main chain scission under sonomechanical activation. Computational CoGEF calculations suggest that the presence of a counterion to cobaltocenium plays a vital role by promoting a peeling mechanism of dissociation in conjunction with the initial slipping.

The fracture of rubbery polymer networks involves a series of molecular events, beginning with conformational changes along the polymer backbone and culminating with a chain scission reaction. Here, we report covalent polymer gels in which the macroscopic fracture “reaction” is controlled by mechanophores embedded within mechanically active network strands. We synthesized poly(ethylene glycol) (PEG) gels through the end-linking of azide-terminated tetra-arm PEG (Mn= 5 kDa) with bis-alkyne linkers. Networks were formed under identical conditions, except that the bis-alkyne was varied to include either a cis-diaryl (1) or cis-dialkyl (2) linked cyclobutane mechanophore that acts as a mechanochemical “weak link” through a force-coupled cycloreversion. A control network featuring a bis-alkyne without cyclobutane (3) was also synthesized. The networks show the same linear elasticity (G′ = 23–24 kPa, 0.1–100 Hz) and equilibrium mass swelling ratios (Q= 10–11 in tetrahydrofuran), but they exhibit tearing energies that span a factor of 8 (3.4 J, 10.6, and 27.1 J·m–2for networks with 1, 2, and 3, respectively). The difference in fracture energy is well-aligned with the force-coupled scission kinetics of the mechanophores observed in single-molecule force spectroscopy experiments, implicating local resonance stabilization of a diradical transition state in the cycloreversion of 1as a key determinant of the relative ease with which its network is torn. The connection between macroscopic fracture and a small-molecule reaction mechanism suggests opportunities for molecular understanding and optimization of polymer network behavior.

Woodward and Hoffman once jested that a very powerful Maxwell demon could seize a molecule of cyclobutene at its methylene groups and tear it open in a disrotatory fashion to obtain butadiene (Woodward, R. B.; Hoffmann, R. The Conservation of Orbital Symmetry. Angew. Chem., Int. Ed. 1969, 8, 781–853). Nearly 40 years later, that demon was discovered, and the field of covalent polymer mechanochemistry was born. In the decade since our demon was befriended, many fundamental investigations have been undertaken to build up our understanding of force-modified pathways for electrocyclic ring-opening reactions. Here, we seek to extend that fundamental understanding by exploring substituent effects in allowed and forbidden ring-opening reactions of cyclobutene (CBE) and benzocyclobutene (BCB) using a combination of single-molecule force spectroscopy (SMFS) and computation. We show that, while the forbidden ring-opening of cis-BCB occurs at a lower force than the allowed ring-opening of trans-BCB on the time scale of the SMFS experiment, the opposite is true for cis- and trans-CBE. Such a reactivity flip is explained through computational analysis and discussion of the so-called allowed/forbidden gap.

Metal-complexed N-heterocyclic carbene (NHC) mechanophores are latent reactants and catalysts for a range of mechanically driven chemical responses, but mechanochemical scission of the metal–NHC bond has not been experimentally characterized. Here we report the single-molecule force spectroscopy of ligand dissociation from a pincer NHC–pyridine–NHC Pd(II) complex. The force-coupled rate constant for ligand dissociation reaches 50 s–1at forces of approximately 930 pN. Experimental and computational observations support a dissociative, rather than associative, mechanism of ligand displacement, with rate-limiting scission of the Pd–NHC bond followed by rapid dissociation of the pyridine moiety from Pd.

Mechanophores can be used to produce strain-dependent covalent chemical responses in polymeric materials, including stress strengthening, stress sensing and network remodelling. In general, it is desirable for mechanophores to be inert in the absence of force but highly reactive under applied tension. Metallocenes possess potentially useful combinations of force-free stability and force-coupled reactivity, but the mechanistic basis of this reactivity remains largely unexplored. Here, we have used single-molecule force spectroscopy to show that the mechanical reactivities of a series of ferrocenophanes are not correlated with ring strain in the reactants, but with the extent of rotational alignment of their two cyclopentadienyl ligands. Distal attachments can be used to restrict the mechanism of ferrocene dissociation to proceed through ligand ‘peeling’, as opposed to the more conventional ’shearing’ mechanism of the parent ferrocene, leading the dissociation rate constant to increase by several orders of magnitude at forces of ~1?nN. It also leads to improved macroscopic, multi-responsive behaviour, including mechanochromism and force-induced cross-linking in ferrocenophane-containing polymers.

Here, we report the effect of force applied to the biaryl backbone of a bisphosphine ligand on the rate of oxidative addition of bromobenzene to a ligand-coordinated palladium center. Local compressive and tensile forces on the order of 100 pN were generated using a stiff stilbene force probe. A compressive force increases the rate of oxidative addition, whereas a tensile force decreases the rate, relative to that of the parent complex of strain-free ligand. Rates vary by a factor of ∼6 across ∼340 pN of force applied to the complexes. The crystal structures and DFT calculations support that force-induced perturbation of the geometry of the reactant is negligible. The force-rate relationship observed is mainly attributed to the coupling of force to nuclear motion comprising the reaction coordinate. These observations inform the development of catalysts whose activity can be tuned by an external force that is adjusted within a catalytic cycle.

Degradable polymers are desirable for the replacement of conventional organic polymers that persist in the environment, but they often suffer from the unintentional scission of the degradable functionalities on the polymer backbone, which diminishes polymer properties during storage and regular use. Herein, we report a strategy that combats unintended degradation in polymers by combining two common degradation stimuli—mechanical and acid triggers—in an “AND gate” fashion. A cyclobutane (CB) mechanophore is used as a mechanical gate to regulate an acid-sensitive ketal that has been widely employed in acid degradable polymers. This gated ketal is further incorporated into the polymer backbone. In the presence of an acid trigger alone, the pristine polymer retains its backbone integrity, and delivering high mechanical forces alone by ultrasonication degrades the polymer to an apparent limiting molecular weight of 28 kDa. The sequential treatment of ultrasonication followed by acid, however, leads to a further 11-fold decrease in molecular weight to 2.5 kDa. Experimental and computational evidence further indicate that the ungated ketal possesses mechanical strength that is commensurate with the conventional polymer backbones. Single molecule force spectroscopy (SMFS) reveals that the force necessary to activate the CB molecular gate on the time scale of 100 ms is approximately 2 nN.

Mechanically coupled proton transduction offers potential for stress-responsive polymeric materials whose properties can be switched via acid-triggered coloration, polymerization/cross-linking, or degradation. The utility of currently available mechanoacids, however, is limited by modest force-free stability or a scissile response that caps mechanoacid generation at one proton per strained polymer chain. Here, we report a new mechanoacid based on 2-methoxy-substituted gem-dichlorocyclopropane (MeO-gDCC). Pulsed ultrasonication leads to the mechanochemical ring opening of the MeO-gDCC and the subsequent elimination of either HCl or MeCl, with ∼0.58 equiv of HCl released per mechanophore activation and ∼67 protons per chain scission event. Single-molecule force spectroscopy reveals that the methoxy substituent lowers the force required for rapid (kopen∼102s–1) ring opening to ca. 900 pN, vs 1300 pN required for the parent gDCC. The utility of the mechanoacid is demonstrated in silicone elastomers, where its mechanical activation leads to a strain-triggered color change prior to fracture of the elastomer. The postactivation kinetics of coloration are used to demonstrate a new concept in mechanochromism, namely, a spectroscopic indicator of not only whether and where a mechanical event has occurred but when it occurred.

When multiple reaction steps occur before thermal equilibration, kinetic energy from one reaction step can influence overall product distributions in ways that are not well predicted by transition state theory. An understanding of how the structural features of mechanophores, such as substitutions, affect reactivity, product distribution, and the extent of dynamic effects in the mechanochemical manifolds is necessary for designing chemical reactions and responsive materials. We synthesized two tetrafluorinated [4]-ladderanes with fluorination on different rungs and found that the fluorination pattern influenced the force sensitivity and stereochemical distribution of products in the mechanochemistry of these fluorinated ladderanes. The threshold forces for mechanochemical unzipping of ladderane were decreased by α-fluorination and increased by γ-fluorination; these changes correlated to the different stabilizing or destabilizing effects of fluorination patterns on the first transition state. Using ab initiosteered molecular dynamics (AISMD), we compared the product distributions of synthesized and hypothetical ladderanes with different substitution patterns. These calculations suggest that fluorination on the first two bonds of ladderane gives rise to a larger fraction of dynamic trajectories and a larger fraction of E-alkene product through a mechanism resulting from larger momentum because of the greater atomic mass of fluorine. Fluorination on the third and fourth rungs instead gives a larger fraction of E-alkene product primarily due to electronic effects. These combined experimental and computational studies of the mechanochemical unzipping of fluorinated ladderanes provide an example of how relatively simple substituents can affect the extent of nonstatistical dynamics and, thus, mechanochemical outcomes.

Mechanical forces have previously been used to drive reactions along pathways that violate the orbital symmetry effects captured in the Woodward–Hoffmann rules. Here, we show that a polymer “lever arm effect” can provide a mechanical advantage in accelerating the symmetry forbidden disrotatory ring opening of benzocyclobutene (BCB). Addition of an α-E-alkene to the BCB mechanophore drops the force required to induce reactions on the ∼0.1 s time scale of single-molecule force spectroscopy experiments from 1370 to 920 pN.

Polymers that release small molecules in response to mechanical force are promising candidates as next-generation on-demand delivery systems. Despite advancements in the development of mechanophores for releasing diverse payloads through careful molecular design, the availability of scaffolds capable of discharging biomedically significant cargos in substantial quantities remains scarce. In this report, we detail a nonscissile mechanophore built from an 8-thiabicyclo[3.2.1]octane 8,8-dioxide (TBO) motif that releases one equivalent of sulfur dioxide (SO2) from each repeat unit. The TBOmechanophore exhibits high thermal stability but is activated mechanochemically using solution ultrasonication in either organic solvent or aqueous media with up to 63% efficiency, equating to 206 molecules of SO2released per 143.3 kDa chain. We quantified the mechanochemical reactivity of TBOby single-molecule force spectroscopy and resolved its single-event activation. The force-coupled rate constant for TBOopening reaches ∼9.0 s–1at ∼1520 pN, and each reaction of a single TBOdomain releases a stored length of ∼0.68 nm. We investigated the mechanism of TBOactivation using ab initio steered molecular dynamic simulations and rationalized the observed stereoselectivity. These comprehensive studies of the TBOmechanophore provide a mechanically coupled mechanism of multi-SO2release from one polymer chain, facilitating the translation of polymer mechanochemistry to potential biomedical applications.